Category: Distribution
Distribution
Showing 1–80 of 84 results
-
3 inputs VHF-UHF-UHF mixer Blister Televes
KSh4,568.00Add to cart3-input combiner for several terrestrial bands. Includes mast-mount case for outdoor installation.?Allows current pass from output to UHF input to power a mast amplifier or a BOSS system.?Orange colour.?Blister
-
Alcad BC-100 Terminal, attenuation 0,5 db
KSh2,190.00Add to cartAlcad BC-100 – Serie 907: Terminal, attenuation 0,5 db.
Outlets for terrestrial TV with two IEC male and female connectors. Radio and TV outputs separated by filters. Designed for use in cable TV networks. They cover frequencies between 5 and 1000 MHz.
Applications
Cable TV networks requiring the filtering of radio and TV signals at the outlet base. Installation as a terminal outlet connected to a tap-off or splitter or as outlets in series connected to each other. The outlet base facilitates the connection of the TV to the distribution and loads the distribution when the TV is not connected.
Characteristics
Voltage blockage in the output connectors with a 2 KV insulation. Shielded zamak and metal plate chassis. Connection of the coaxial cable by means of screw terminal. Fits in a ?60 mm box.
Downloads
Technical specification
Technical specification
Manuals
– pdf 619.4 KB
Catalogues
CATALOGUE_ALCAD_EN_MULTIMEDIA_TV pdf 5.42 MB
Technical specifications
-
Alcad BC-200 Attenuation, 10 db
KSh2,384.00Add to cartAlcad BC-200 – Serie 907: Attenuation, 10 db.
Outlets for terrestrial TV with two IEC male and female connectors. Radio and TV outputs separated by filters. Designed for use in cable TV networks. They cover frequencies between 5 and 1000 MHz.
Applications
Cable TV networks requiring the filtering of radio and TV signals at the outlet base. Installation as a terminal outlet connected to a tap-off or splitter or as outlets in series connected to each other. The outlet base facilitates the connection of the TV to the distribution and loads the distribution when the TV is not connected.
Characteristics
Voltage blockage in the output connectors with a 2 KV insulation. Shielded zamak and metal plate chassis. Connection of the coaxial cable by means of screw terminal. Fits in a ?60 mm box.
Downloads
Technical specification
Technical specification
Manuals
– pdf 619.4 KB
Catalogues
CATALOGUE_ALCAD_EN_MULTIMEDIA_TV pdf 5.42 MB
Technical specifications
-
Alcad BM-100 Terminal, attenuation 4 db
KSh1,754.00Add to cartAlcad BM-100 – Serie 907: Terminal, attenuation 4 db.
Outlets for terrestrial TV with two IEC male and female connectors. They cover frequencies up to 862 MHz. Applications Individual or MATV installations. Installation as a terminal outlet connected to a tap-off or splitter, or as outlets in series connected to each other. The outlet facilitates the connection of the TV to the distribution and loads the distribution when the TV is not connected.
Characteristics
Voltage blockage in the output connectors. Shielded zamak and metal plate chassis. Connection of the coaxial cable by means of screw terminal. Fits in a ?60 mm box.
Downloads
Technical specification
Technical specification
Manuals
– pdf 619.4 KB
Catalogues
CATALOGUE_ALCAD_EN_MULTIMEDIA_TV pdf 5.42 MB
Technical specifications
-
Alcad BM-101 Terminal, attenuation 6 db (bridge)
KSh1,452.00Add to cartAlcad BM-101 – Serie 907: Terminal, attenuation 6 db (bridge).
Outlets for terrestrial TV with two IEC male and female connectors. They cover frequencies up to 862 MHz. Applications Individual or MATV installations. Installation as a terminal outlet connected to a tap-off or splitter, or as outlets in series connected to each other. The outlet facilitates the connection of the TV to the distribution and loads the distribution when the TV is not connected.
Characteristics
Voltage blockage in the output connectors. Shielded zamak and metal plate chassis. Connection of the coaxial cable by means of screw terminal. Fits in a ?60 mm box.
Downloads
Technical specification
Technical specification
Manuals
– pdf 619.4 KB
Catalogues
CATALOGUE_ALCAD_EN_MULTIMEDIA_TV pdf 5.42 MB
Technical specifications
-
Alcad BM-111 Terminal, attenuation 1 db
KSh1,754.00Add to cartAlcad BM-111 – Serie 907: Terminal, attenuation 1 db.
Outlets for terrestrial TV with two IEC male and female connectors. They cover frequencies up to 862 MHz. Applications Individual or MATV installations. Installation as a terminal outlet connected to a tap-off or splitter, or as outlets in series connected to each other. The outlet facilitates the connection of the TV to the distribution and loads the distribution when the TV is not connected.
Characteristics
Voltage blockage in the output connectors. Shielded zamak and metal plate chassis. Connection of the coaxial cable by means of screw terminal. Fits in a ?60 mm box.
Downloads
Technical specification
Technical specification
Manuals
– pdf 619.4 KB
Catalogues
CATALOGUE_ALCAD_EN_MULTIMEDIA_TV pdf 5.42 MB
Technical specifications
-
Alcad BM-200 Attenuation 7 db
KSh2,094.00Add to cartAlcad BM-200 – Serie 907: Attenuation 7 db.
Outlets for terrestrial TV with two IEC male and female connectors. They cover frequencies up to 862 MHz. Applications Individual or MATV installations. Installation as a terminal outlet connected to a tap-off or splitter, or as outlets in series connected to each other. The outlet facilitates the connection of the TV to the distribution and loads the distribution when the TV is not connected.
Characteristics
Voltage blockage in the output connectors. Shielded zamak and metal plate chassis. Connection of the coaxial cable by means of screw terminal. Fits in a ?60 mm box.
Downloads
Technical specification
Technical specification
Manuals
– pdf 619.4 KB
Catalogues
CATALOGUE_ALCAD_EN_MULTIMEDIA_TV pdf 5.42 MB
Technical specifications
-
Alcad BM-500 Attenuation 12 db
KSh2,094.00Add to cartAlcad BM-500 – Serie 907: Attenuation 12 db.
Outlets for terrestrial TV with two IEC male and female connectors. They cover frequencies up to 862 MHz. Applications Individual or MATV installations. Installation as a terminal outlet connected to a tap-off or splitter, or as outlets in series connected to each other. The outlet facilitates the connection of the TV to the distribution and loads the distribution when the TV is not connected.
Characteristics
Voltage blockage in the output connectors. Shielded zamak and metal plate chassis. Connection of the coaxial cable by means of screw terminal. Fits in a ?60 mm box.
Downloads
Technical specification
Technical specification
Manuals
– pdf 619.4 KB
Catalogues
CATALOGUE_ALCAD_EN_MULTIMEDIA_TV pdf 5.42 MB
Technical specifications
-
Alcad BM-700 Attenuation 15 db
KSh2,094.00Add to cartAlcad BM-700 – Serie 907: Attenuation 15 db.
Outlets for terrestrial TV with two IEC male and female connectors. They cover frequencies up to 862 MHz. Applications Individual or MATV installations. Installation as a terminal outlet connected to a tap-off or splitter, or as outlets in series connected to each other. The outlet facilitates the connection of the TV to the distribution and loads the distribution when the TV is not connected.
Characteristics
Voltage blockage in the output connectors. Shielded zamak and metal plate chassis. Connection of the coaxial cable by means of screw terminal. Fits in a ?60 mm box.
Downloads
Technical specification
Technical specification
Manuals
– pdf 619.4 KB
Catalogues
CATALOGUE_ALCAD_EN_MULTIMEDIA_TV pdf 5.42 MB
Technical specifications
-
Alcad BS-100 If outlet (f connector)
KSh2,396.00Add to cartAlcad BS-100 – Serie 907: If outlet (f connector).
Outlets for terrestrial and satellite TV with two IEC male and female connectors (except for the BS-100 outlet). They cover frequencies up to 2,400 MHz. They have a DC path from one of their outputs to the input and from the through output in the intermediate outlets to the input.
Applications
Individual or SMATV installations. Installation as a terminal outlet connected to a tap-off or splitter, or as outlets in series connected to each other. They permit the feeding of a preamplifier or of an LNB through the output. A control voltage can be used in installations with multiswitches.
Characteristics
Shielded zamak and metal plate chassis. Connection of the coaxial cable by means of screw terminal. Fits in a ?60 mm box.
Downloads
Technical specification
Technical specification
Manuals
– pdf 611.12 KB
Catalogues
CATALOGUE_ALCAD_EN_MULTIMEDIA_TV pdf 5.42 MB
Certificates
CE_Declaration-TV_Distribution pdf 269.31 KB
Technical specifications
-
Read moreAlcad BS-102 – Serie 907: If terminal outlet, 2 db, 3 connectors.
Outlets for terrestrial and satellite TV with three male IEC connectors, an IEC female connector and an F-type female connector. They cover frequencies up to 2,300MHz. They allow a feed path via the female F-type connector to the input.
Applications
Outlets for terrestrial and satellite TV with three male IEC connectors, an IEC female connector and an F-type female connector. They cover frequencies up to 2,300MHz. They allow a feed path via the female F-type connector to the input.
Characteristics
Shielded zamak and metal plate chassis. Connection of the coaxial cable by means of screw terminal. Includes TV/R/SAT frontplate, surface box and screws for fixing to a wall.
Downloads
Technical specification
Technical specification
Catalogues
CATALOGUE_ALCAD_EN_MULTIMEDIA_TV pdf 5.42 MB
Technical specifications
-
Alcad BS-110 Terminal, attenuation 5 db
KSh2,202.00Add to cartAlcad BS-110 – Serie 907: Terminal; attenuation 5 db.
Outlets for terrestrial and satellite TV with two IEC male and female connectors (except for the BS-100 outlet). They cover frequencies up to 2,400 MHz. They have a DC path from one of their outputs to the input and from the through output in the intermediate outlets to the input.
Applications
Individual or SMATV installations. Installation as a terminal outlet connected to a tap-off or splitter, or as outlets in series connected to each other. They permit the feeding of a preamplifier or of an LNB through the output. A control voltage can be used in installations with multiswitches.
Characteristics
Shielded zamak and metal plate chassis. Connection of the coaxial cable by means of screw terminal. Fits in a ?60 mm box.
Downloads
Technical specification
Technical specification
Manuals
– pdf 611.12 KB
Catalogues
CATALOGUE_ALCAD_EN_MULTIMEDIA_TV pdf 5.42 MB
Technical specifications
-
Alcad BS-112 Terminal, attenuation 1 db
KSh1,972.00Add to cartAlcad BS-112 – Serie 907: Terminal, attenuation 1 db.
Outlets for terrestrial and satellite TV with two IEC male and female connectors (except for the BS-100 outlet). They cover frequencies up to 2,400 MHz. They have a DC path from one of their outputs to the input and from the through output in the intermediate outlets to the input.
Applications
Individual or SMATV installations. Installation as a terminal outlet connected to a tap-off or splitter, or as outlets in series connected to each other. They permit the feeding of a preamplifier or of an LNB through the output. A control voltage can be used in installations with multiswitches.
Characteristics
Shielded zamak and metal plate chassis. Connection of the coaxial cable by means of screw terminal. Fits in a ?60 mm box.
Downloads
Technical specification
Technical specification
Manuals
– pdf 611.12 KB
Catalogues
CATALOGUE_ALCAD_EN_MULTIMEDIA_TV pdf 5.42 MB
Technical specifications
-
Alcad BS-113 Outlet terminal, attenuation 1 db
KSh1,802.00Add to cartAlcad BS-113 – Serie 907: Outlet terminal, attenuation 1 db.
Outlet for terrestrial and satellite TV without brackets, for mounting in flush-mounted box with screws. The electrical characteristics are the same as those of the BS-112 model (see page 340).
Downloads
Technical specification
Technical specification
Manuals
– pdf 611.12 KB
Catalogues
CATALOGUE_ALCAD_EN_MULTIMEDIA_TV pdf 5.42 MB
Technical specifications
-
Alcad BS-210 Attenuation 10 db
KSh2,504.00Add to cartAlcad BS-210 – Serie 907: Attenuation 10 db.
Outlets for terrestrial and satellite TV with two IEC male and female connectors (except for the BS-100 outlet). They cover frequencies up to 2,400 MHz. They have a DC path from one of their outputs to the input and from the through output in the intermediate outlets to the input.
Applications
Individual or SMATV installations. Installation as a terminal outlet connected to a tap-off or splitter, or as outlets in series connected to each other. They permit the feeding of a preamplifier or of an LNB through the output. A control voltage can be used in installations with multiswitches.
Characteristics
Shielded zamak and metal plate chassis. Connection of the coaxial cable by means of screw terminal. Fits in a ?60 mm box.
Downloads
Technical specification
Technical specification
Manuals
– pdf 611.12 KB
Catalogues
CATALOGUE_ALCAD_EN_MULTIMEDIA_TV pdf 5.42 MB
Technical specifications
-
Add to cartAlcad BS-220 – Serie 907: If outlet 12 db cascade (5-2400 mhz).
Outlets for terrestrial and satellite TV with two IEC male and female connectors. They cover frequencies up to 2,400 MHz.
Applications
SMATV installations. Installation as outlets in series connected to each other. The outlet facilitates the connection of the TV to the distribution and loads the distribution when the TV is not connected.
Characteristics
Voltage blockage in the output connectors. Shielded zamak and metal plate chassis. Connection of the coaxial cable by means of screw terminal. Fits in a ?60 mm box.
Downloads
Technical specification
Technical specification
Manuals
– pdf 180.78 KB
Catalogues
CATALOGUE_ALCAD_EN_MULTIMEDIA_TV pdf 5.42 MB
Technical specifications
-
Add to cartAlcad BS-420 – Serie 907: If outlet 16 db cascade (5-2400 mhz).
Outlets for terrestrial and satellite TV with two IEC male and female connectors. They cover frequencies up to 2,400 MHz.
Applications
SMATV installations. Installation as outlets in series connected to each other. The outlet facilitates the connection of the TV to the distribution and loads the distribution when the TV is not connected.
Characteristics
Voltage blockage in the output connectors. Shielded zamak and metal plate chassis. Connection of the coaxial cable by means of screw terminal. Fits in a ?60 mm box.
Downloads
Technical specification
Technical specification
Manuals
– pdf 180.78 KB
Catalogues
CATALOGUE_ALCAD_EN_MULTIMEDIA_TV pdf 5.42 MB
Technical specifications
-
Alcad BS-510 Attenuation 15 db
KSh2,504.00Add to cartAlcad BS-510 – Serie 907: Attenuation 15 db.
Outlets for terrestrial and satellite TV with two IEC male and female connectors (except for the BS-100 outlet). They cover frequencies up to 2,400 MHz. They have a DC path from one of their outputs to the input and from the through output in the intermediate outlets to the input.
Applications
Individual or SMATV installations. Installation as a terminal outlet connected to a tap-off or splitter, or as outlets in series connected to each other. They permit the feeding of a preamplifier or of an LNB through the output. A control voltage can be used in installations with multiswitches.
Characteristics
Shielded zamak and metal plate chassis. Connection of the coaxial cable by means of screw terminal. Fits in a ?60 mm box.
Downloads
Technical specification
Technical specification
Manuals
– pdf 611.12 KB
Catalogues
CATALOGUE_ALCAD_EN_MULTIMEDIA_TV pdf 5.42 MB
Technical specifications
-
Add to cartAlcad BS-620 – Serie 907: If outlet 21 db cascade (5-2400 mhz).
Outlets for terrestrial and satellite TV with two IEC male and female connectors. They cover frequencies up to 2,400 MHz.
Applications
SMATV installations. Installation as outlets in series connected to each other. The outlet facilitates the connection of the TV to the distribution and loads the distribution when the TV is not connected.
Characteristics
Voltage blockage in the output connectors. Shielded zamak and metal plate chassis. Connection of the coaxial cable by means of screw terminal. Fits in a ?60 mm box.
Downloads
Technical specification
Technical specification
Manuals
– pdf 180.78 KB
Catalogues
CATALOGUE_ALCAD_EN_MULTIMEDIA_TV pdf 5.42 MB
Technical specifications
-
Alcad DE-201 Tap-off if 2 out 10 db
KSh1,682.00Add to cartAlcad DE-201 – Serie 906: Tap-off if 2 out 10 db.
Tap-offs for terrestrial and satellite TV with two tap outputs, covering the 5MHz to 2,300MHz frequencies. They distribute part of the input signal to their tap outputs while the main part of the signal continues to the output. The response of the tap outputs is flat, without equalisation. Available in different tap-off attenuation values.
Applications
Collective terrestrial and satellite TV installations with an arborescent or tree-shaped distribution. The arborescent distribution reduces the number of distribution elements and the length of coaxial cable to be installed, even though the distances from head-end to outlet remain constant.
Characteristics
Protection diodes in all the outputs. Shielded zamak chassis and metal plate. Zamak F-type connectors which form part of the tap-off chassis.
Downloads
Technical specification
Technical specification
Catalogues
CATALOGUE_ALCAD_EN_MULTIMEDIA_TV pdf 5.42 MB
Technical specifications
-
Alcad DE-203 Tap-off if 2 out 15 db
KSh1,682.00Add to cartAlcad DE-203 – Serie 906: Tap-off if 2 out 15 db.
Tap-offs for terrestrial and satellite TV with two tap outputs, covering the 5MHz to 2,300MHz frequencies. They distribute part of the input signal to their tap outputs while the main part of the signal continues to the output. The response of the tap outputs is flat, without equalisation. Available in different tap-off attenuation values.
Applications
Collective terrestrial and satellite TV installations with an arborescent or tree-shaped distribution. The arborescent distribution reduces the number of distribution elements and the length of coaxial cable to be installed, even though the distances from head-end to outlet remain constant.
Characteristics
Protection diodes in all the outputs. Shielded zamak chassis and metal plate. Zamak F-type connectors which form part of the tap-off chassis.
Downloads
Technical specification
Technical specification
Catalogues
CATALOGUE_ALCAD_EN_MULTIMEDIA_TV pdf 5.42 MB
Technical specifications
-
Alcad DE-205 Tap-off if 2 out 20 db
KSh1,682.00Add to cartAlcad DE-205 – Serie 906: Tap-off if 2 out 20 db.
Tap-offs for terrestrial and satellite TV with two tap outputs, covering the 5MHz to 2,300MHz frequencies. They distribute part of the input signal to their tap outputs while the main part of the signal continues to the output. The response of the tap outputs is flat, without equalisation. Available in different tap-off attenuation values.
Applications
Collective terrestrial and satellite TV installations with an arborescent or tree-shaped distribution. The arborescent distribution reduces the number of distribution elements and the length of coaxial cable to be installed, even though the distances from head-end to outlet remain constant.
Characteristics
Protection diodes in all the outputs. Shielded zamak chassis and metal plate. Zamak F-type connectors which form part of the tap-off chassis.
Downloads
Technical specification
Technical specification
Catalogues
CATALOGUE_ALCAD_EN_MULTIMEDIA_TV pdf 5.42 MB
Technical specifications
-
Alcad DE-207 Tap-off if 2 out 25 db
KSh1,682.00Add to cartAlcad DE-207 – Serie 906: Tap-off if 2 out 25 db.
Tap-offs for terrestrial and satellite TV with two tap outputs, covering the 5MHz to 2,300MHz frequencies. They distribute part of the input signal to their tap outputs while the main part of the signal continues to the output. The response of the tap outputs is flat, without equalisation. Available in different tap-off attenuation values.
Applications
Collective terrestrial and satellite TV installations with an arborescent or tree-shaped distribution. The arborescent distribution reduces the number of distribution elements and the length of coaxial cable to be installed, even though the distances from head-end to outlet remain constant.
Characteristics
Protection diodes in all the outputs. Shielded zamak chassis and metal plate. Zamak F-type connectors which form part of the tap-off chassis.
Downloads
Technical specification
Technical specification
Catalogues
CATALOGUE_ALCAD_EN_MULTIMEDIA_TV pdf 5.42 MB
Technical specifications
-
Alcad DE-401 Tap-off if 4 out 16 db flat
KSh2,166.00Add to cartAlcad DE-401 – Serie 906: Tap-off if 4 out 16 db flat.
Tap-offs for terrestrial and satellite TV with four tap outputs, covering the 5MHz to 2,300MHz frequencies. They distribute part of the input signal to their tap outputs while the main part of the signal continues to the output. The response of the tap outputs is flat, without equalisation. Available in different tap-off attenuation values.
Applications
Collective terrestrial and satellite TV installations with an arborescent or tree-shaped distribution. The arborescent distribution reduces the number of distribution elements and the length of coaxial cable to be installed, even though the distances from head-end to outlet remain constant.
Characteristics
Protection diodes in all the outputs. Shielded zamak chassis and metal plate. Zamak F-type connectors which form part of the tap-off chassis.
Downloads
Technical specification
Technical specification
Catalogues
CATALOGUE_ALCAD_EN_MULTIMEDIA_TV pdf 5.42 MB
Technical specifications
-
Alcad DE-403 Tap-off if 4 out 15 db
KSh2,166.00Add to cartAlcad DE-403 – Serie 906: Tap-off if 4 out 15 db.
Tap-offs for terrestrial and satellite TV with four tap outputs, covering the 5MHz to 2,300MHz frequencies. They distribute part of the input signal to their tap outputs while the main part of the signal continues to the output. The response of the tap outputs is flat, without equalisation. Available in different tap-off attenuation values.
Applications
Collective terrestrial and satellite TV installations with an arborescent or tree-shaped distribution. The arborescent distribution reduces the number of distribution elements and the length of coaxial cable to be installed, even though the distances from head-end to outlet remain constant.
Characteristics
Protection diodes in all the outputs. Shielded zamak chassis and metal plate. Zamak F-type connectors which form part of the tap-off chassis.
Downloads
Technical specification
Technical specification
Catalogues
CATALOGUE_ALCAD_EN_MULTIMEDIA_TV pdf 5.42 MB
Technical specifications
-
Alcad DE-405 Tap-off if 4 out 24 db flat
KSh2,166.00Add to cartAlcad DE-405 – Serie 906: Tap-off if 4 out 24 db flat.
Tap-offs for terrestrial and satellite TV with four tap outputs, covering the 5MHz to 2,300MHz frequencies. They distribute part of the input signal to their tap outputs while the main part of the signal continues to the output. The response of the tap outputs is flat, without equalisation. Available in different tap-off attenuation values.
Applications
Collective terrestrial and satellite TV installations with an arborescent or tree-shaped distribution. The arborescent distribution reduces the number of distribution elements and the length of coaxial cable to be installed, even though the distances from head-end to outlet remain constant.
Characteristics
Protection diodes in all the outputs. Shielded zamak chassis and metal plate. Zamak F-type connectors which form part of the tap-off chassis.
Downloads
Technical specification
Technical specification
Catalogues
CATALOGUE_ALCAD_EN_MULTIMEDIA_TV pdf 5.42 MB
Technical specifications
-
Alcad DE-407 Tap-off if 4 out 27 db flat
KSh2,166.00Add to cartAlcad DE-407 – Serie 906: Tap-off if 4 out 27 db flat.
Tap-offs for terrestrial and satellite TV with four tap outputs, covering the 5MHz to 2,300MHz frequencies. They distribute part of the input signal to their tap outputs while the main part of the signal continues to the output. The response of the tap outputs is flat, without equalisation. Available in different tap-off attenuation values.
Applications
Collective terrestrial and satellite TV installations with an arborescent or tree-shaped distribution. The arborescent distribution reduces the number of distribution elements and the length of coaxial cable to be installed, even though the distances from head-end to outlet remain constant.
Characteristics
Protection diodes in all the outputs. Shielded zamak chassis and metal plate. Zamak F-type connectors which form part of the tap-off chassis.
Downloads
Technical specification
Technical specification
Catalogues
CATALOGUE_ALCAD_EN_MULTIMEDIA_TV pdf 5.42 MB
Technical specifications
-
Alcad DE-603 Tap-off if 6 out 20 db flat
KSh2,770.00Add to cartAlcad DE-603 – Serie 906: Tap-off if 6 out 20 db flat.
Tap-offs for terrestrial and satellite TV with six tap outputs, covering the 5MHz to 2,300MHz frequencies. They distribute part of the input signal to their tap outputs while the main part of the signal continues to the output. The response of the tap outputs is flat, without equalisation. Available in different tap-off attenuation values.
Applications
Collective terrestrial and satellite TV installations with an arborescent or tree-shaped distribution. The arborescent distribution reduces the number of distribution elements and the length of coaxial cable to be installed, even though the distances from head-end to outlet remain constant.
Characteristics
Protection diodes in all the outputs. Shielded zamak chassis and metal plate. Zamak F-type connectors which form part of the tap-off chassis.
Downloads
Technical specification
Technical specification
Catalogues
CATALOGUE_ALCAD_EN_MULTIMEDIA_TV pdf 5.42 MB
Technical specifications
-
Alcad DE-605 Tap-off if 6 out 24 db flat
KSh2,770.00Add to cartAlcad DE-605 – Serie 906: Tap-off if 6 out 24 db flat.
Tap-offs for terrestrial and satellite TV with six tap outputs, covering the 5MHz to 2,300MHz frequencies. They distribute part of the input signal to their tap outputs while the main part of the signal continues to the output. The response of the tap outputs is flat, without equalisation. Available in different tap-off attenuation values.
Applications
Collective terrestrial and satellite TV installations with an arborescent or tree-shaped distribution. The arborescent distribution reduces the number of distribution elements and the length of coaxial cable to be installed, even though the distances from head-end to outlet remain constant.
Characteristics
Protection diodes in all the outputs. Shielded zamak chassis and metal plate. Zamak F-type connectors which form part of the tap-off chassis.
Downloads
Technical specification
Technical specification
Catalogues
CATALOGUE_ALCAD_EN_MULTIMEDIA_TV pdf 5.42 MB
Technical specifications
-
Alcad DE-607 Tap-off if 6 out 25 db
KSh2,770.00Add to cartAlcad DE-607 – Serie 906: Tap-off if 6 out 25 db.
Tap-offs for terrestrial and satellite TV with six tap outputs, covering the 5MHz to 2,300MHz frequencies. They distribute part of the input signal to their tap outputs while the main part of the signal continues to the output. The response of the tap outputs is flat, without equalisation. Available in different tap-off attenuation values.
Applications
Collective terrestrial and satellite TV installations with an arborescent or tree-shaped distribution. The arborescent distribution reduces the number of distribution elements and the length of coaxial cable to be installed, even though the distances from head-end to outlet remain constant.
Characteristics
Protection diodes in all the outputs. Shielded zamak chassis and metal plate. Zamak F-type connectors which form part of the tap-off chassis.
Downloads
Technical specification
Technical specification
Catalogues
CATALOGUE_ALCAD_EN_MULTIMEDIA_TV pdf 5.42 MB
Technical specifications
-
Read moreAlcad DI-203 – Serie 906: If splitter 2 out with dc path.
2-way splitter for terrestrial and satellite TV, covering all frequencies from 5MHz to 2,400MHz. It distributes all the input signal in equal parts among the 2 outputs. It has a feed path through any of its 2 outputs to the input. The response of the outputs is flat. Also available in 3-, 4-, 6- or 8-way models.
Applications
Individual and collective installations of terrestrial and satellite TV with a star-shaped distribution. They permit power to be fed from a preamplifier or LNB through any of the outputs. In installations with multiswitches, a control voltage can be sent through their outputs.
Characteristics
Protection diodes in all the outputs. Shielded zamak chassis and metal plate. Zamak F-type connectors which form part of splitter chassis.
Downloads
Technical specification
Technical specification
Manuals
DI-203 Manual pdf 923.93 KB
Catalogues
CATALOGUE_ALCAD_EN_MULTIMEDIA_TV pdf 5.42 MB
Certificates
CE Declaration – 906-DI_20210426 pdf 70.31 KB
Technical specifications
-
Read moreAlcad DI-303 – Serie 906: If splitter 3 out with dc path.
3-way splitter for terrestrial and satellite TV, covering all frequencies from 5MHz to 2,400MHz. It distributes all the input signal in equal parts among the 3 outputs. It has a feed path through any of its 3 outputs to the input. The response of the outputs is flat. Also available in 2-, 4-, 6- or 8-way models.
Applications
Individual and collective installations of terrestrial and satellite TV with a star-shaped distribution. They permit power to be fed from a preamplifier or LNB through any of the outputs. In installations with multiswitches, a control voltage can be sent through their outputs.
Characteristics
Protection diodes in all the outputs. Shielded zamak chassis and metal plate. Zamak F-type connectors which form part of splitter chassis.
Downloads
Technical specification
Technical specification
Manuals
DI-303 Manual pdf 923.93 KB
Catalogues
CATALOGUE_ALCAD_EN_MULTIMEDIA_TV pdf 5.42 MB
Certificates
CE Declaration – 906-DI_20210426 pdf 70.31 KB
Technical specifications
-
Read moreAlcad DI-403 – Serie 906: If splitter 4 out with dc path.
4-way splitter for terrestrial and satellite TV, covering all frequencies from 5MHz to 2,400MHz. It distributes all the input signal in equal parts among the 4 outputs. It has a feed path through any of its 4 outputs to the input. The response of the outputs is flat. Also available in 2-, 3-, 6- or 8-way models.
Applications
Individual and collective installations of terrestrial and satellite TV with a star-shaped distribution. They permit power to be fed from a preamplifier or LNB through any of the outputs. In installations with multiswitches, a control voltage can be sent through their outputs.
Characteristics
Protection diodes in all the outputs. Shielded zamak chassis and metal plate. Zamak F-type connectors which form part of splitter chassis.
Downloads
Technical specification
Technical specification
Manuals
DI-403 Manual pdf 923.93 KB
Catalogues
CATALOGUE_ALCAD_EN_MULTIMEDIA_TV pdf 5.42 MB
Certificates
CE Declaration – 906-DI_20210426 pdf 70.31 KB
Technical specifications
-
Read moreAlcad DI-603 – Serie 906: If splitter 6 out with dc path.
6-way splitter for terrestrial and satellite TV, covering all frequencies from 5MHz to 2,400MHz. It distributes all the input signal in equal parts among the 6 outputs. It has a feed path through any of its 6 outputs to the input. The response of the outputs is flat. Also available in 2-, 3-, 4- or 8-way models.
Applications
Individual and collective installations of terrestrial and satellite TV with a star-shaped distribution. They permit power to be fed from a preamplifier or LNB through any of the outputs. In installations with multiswitches, a control voltage can be sent through their outputs.
Characteristics
Protection diodes in all the outputs. Shielded zamak chassis and metal plate. Zamak F-type connectors which form part of splitter chassis.
Downloads
Technical specification
Technical specification
Manuals
DI-603 Manual pdf 923.93 KB
Catalogues
CATALOGUE_ALCAD_EN_MULTIMEDIA_TV pdf 5.42 MB
Certificates
CE Declaration – 906-DI_20210426 pdf 70.31 KB
Technical specifications
-
Read moreAlcad DI-803 – Serie 906: If splitter 8 out with dc path.
8-way splitter for terrestrial and satellite TV, covering all frequencies from 5MHz to 2,400MHz. It distributes all the input signal in equal parts among the 8 outputs. It has a feed path through any of its 8 outputs to the input. The response of the outputs is flat. Also available in 2-, 3-, 4- or 6-way models.
Applications
Individual and collective installations of terrestrial and satellite TV with a star-shaped distribution. They permit power to be fed from a preamplifier or LNB through any of the outputs. In installations with multiswitches, a control voltage can be sent through their outputs.
Characteristics
Protection diodes in all the outputs. Shielded zamak chassis and metal plate. Zamak F-type connectors which form part of splitter chassis.
Downloads
Technical specification
Technical specification
Manuals
DI-803 Manual pdf 923.93 KB
Catalogues
CATALOGUE_ALCAD_EN_MULTIMEDIA_TV pdf 5.42 MB
Certificates
CE Declaration – 906-DI_20210426 pdf 70.31 KB
Technical specifications
-
Add to cartAlcad EM-200 – Serie 907: Front plate tv-fm (for bm & bc).
TV/R frontplate for BM-BC outlets.
Downloads
Technical specification
Technical specification
Catalogues
CATALOGUE_ALCAD_EN_MULTIMEDIA_TV pdf 5.42 MB
Technical specifications
-
Add to cartAlcad EM-201 – Serie 907: Front plate bs (not for bs-112).
TV-R/TV-R frontplate for all the BS outlet models except BS-100 and BS-112.
Downloads
Technical specification
Technical specification
Catalogues
CATALOGUE_ALCAD_EN_MULTIMEDIA_TV pdf 5.42 MB
Technical specifications
-
Alcad EM-202 Front plate for bs-112
KSh266.00Add to cartAlcad EM-202 – Serie 907: Front plate for bs-112.
TV-R/SAT frontplate for BS-100 and BS-112 outlet bases.
Downloads
Technical specification
Technical specification
Catalogues
CATALOGUE_ALCAD_EN_MULTIMEDIA_TV pdf 5.42 MB
Technical specifications
-
Add to cartAlcad EM-210 – Serie 907: Customised front plate for bm/bc.
TV/R customised front plate for outlet BM and BC.
Downloads
Technical specification
Technical specification
Catalogues
CATALOGUE_ALCAD_EN_MULTIMEDIA_TV pdf 5.42 MB
Technical specifications
-
Add to cartAlcad EM-211 – Serie 907: Custom front plate for bs (not bs-112).
TV-R/TV-R customised front plate for all BS outlet models except BS-100 and BS-112.
Downloads
Technical specification
Technical specification
Catalogues
CATALOGUE_ALCAD_EN_MULTIMEDIA_TV pdf 5.42 MB
Technical specifications
-
Add to cartAlcad EM-212 – Serie 907: Customised front plate for bs-112.
TV-R/SAT customised front plate for BS-100 and BS-112 outlet bases.
Downloads
Technical specification
Technical specification
Catalogues
CATALOGUE_ALCAD_EN_MULTIMEDIA_TV pdf 5.42 MB
Technical specifications
-
Alcad FD-210 Tap-off if 2 out 10db equalized
KSh3,594.00Add to cartAlcad FD-210 – Serie 906: Tap-off if 2 out 10db equalized.
Equalised tap-offs for terrestrial and satellite TV with two tap outputs which cover the 5 to 2,400 MHz frequencies. They distribute part of the input signal to their tap outputs and the main part of the signal continues to the output. The equalisation of the tap outputs compensates the losses of the coaxial cable. Available in different tap-off attenuation values.
Applications
SMATV installations with a tree-shaped distribution. The tree-shaped distribution reduces the number of distribution elements, and reduces the metres of coaxial cable to be installed, even though the headend to outlet distances remain constant. For installation in buildings with many floors due to the low through loss of the tap-offs.
Characteristics
Voltage blockage in the tap-offs. Shielded zamak chassis and metal plate. Connectors on the lower part to facilitate the connections. Reduced dimensions. Fits in a 100 x100 mm box.
Downloads
Technical specification
Technical specification
Manuals
– pdf 362.82 KB
Catalogues
CATALOGUE_ALCAD_EN_MULTIMEDIA_TV pdf 5.42 MB
Technical specifications
-
Alcad FD-213 Tap-off if 2 out 12db equalized
KSh3,594.00Add to cartAlcad FD-213 – Serie 906: Tap-off if 2 out 12db equalized.
Equalised tap-offs for terrestrial and satellite TV with two tap outputs which cover the 5 to 2,400 MHz frequencies. They distribute part of the input signal to their tap outputs and the main part of the signal continues to the output. The equalisation of the tap outputs compensates the losses of the coaxial cable. Available in different tap-off attenuation values.
Applications
SMATV installations with a tree-shaped distribution. The tree-shaped distribution reduces the number of distribution elements, and reduces the metres of coaxial cable to be installed, even though the headend to outlet distances remain constant. For installation in buildings with many floors due to the low through loss of the tap-offs.
Characteristics
Voltage blockage in the tap-offs. Shielded zamak chassis and metal plate. Connectors on the lower part to facilitate the connections. Reduced dimensions. Fits in a 100 x100 mm box.
Downloads
Technical specification
Technical specification
Manuals
– pdf 362.82 KB
Catalogues
CATALOGUE_ALCAD_EN_MULTIMEDIA_TV pdf 5.42 MB
Technical specifications
-
Alcad FD-219 Tap-off if 2 out 18db equalized
KSh3,594.00Add to cartAlcad FD-219 – Serie 906: Tap-off if 2 out 18db equalized.
Equalised tap-offs for terrestrial and satellite TV with two tap outputs which cover the 5 to 2,400 MHz frequencies. They distribute part of the input signal to their tap outputs and the main part of the signal continues to the output. The equalisation of the tap outputs compensates the losses of the coaxial cable. Available in different tap-off attenuation values.
Applications
SMATV installations with a tree-shaped distribution. The tree-shaped distribution reduces the number of distribution elements, and reduces the metres of coaxial cable to be installed, even though the headend to outlet distances remain constant. For installation in buildings with many floors due to the low through loss of the tap-offs.
Characteristics
Voltage blockage in the tap-offs. Shielded zamak chassis and metal plate. Connectors on the lower part to facilitate the connections. Reduced dimensions. Fits in a 100 x100 mm box.
Downloads
Technical specification
Technical specification
Manuals
– pdf 362.82 KB
Catalogues
CATALOGUE_ALCAD_EN_MULTIMEDIA_TV pdf 5.42 MB
Technical specifications
-
Alcad FD-225 Tap-off if 2 out 26db equalized
KSh3,594.00Add to cartAlcad FD-225 – Serie 906: Tap-off if 2 out 26db equalized.
Equalised tap-offs for terrestrial and satellite TV with two tap outputs which cover the 5 to 2,400 MHz frequencies. They distribute part of the input signal to their tap outputs and the main part of the signal continues to the output. The equalisation of the tap outputs compensates the losses of the coaxial cable. Available in different tap-off attenuation values.
Applications
SMATV installations with a tree-shaped distribution. The tree-shaped distribution reduces the number of distribution elements, and reduces the metres of coaxial cable to be installed, even though the headend to outlet distances remain constant. For installation in buildings with many floors due to the low through loss of the tap-offs.
Characteristics
Voltage blockage in the tap-offs. Shielded zamak chassis and metal plate. Connectors on the lower part to facilitate the connections. Reduced dimensions. Fits in a 100 x100 mm box.
Downloads
Technical specification
Technical specification
Manuals
– pdf 362.82 KB
Catalogues
CATALOGUE_ALCAD_EN_MULTIMEDIA_TV pdf 5.42 MB
Technical specifications
-
Alcad FD-410 Tap-off if 4 out 10db equalized
KSh4,574.00Add to cartAlcad FD-410 – Serie 906: Tap-off if 4 out 10db equalized.
Equalised tap-offs for terrestrial and satellite TV with four tap outputs which cover the 5 to 2,400 MHz frequencies. They distribute part of the input signal to their tap outputs and the main part of the signal continues to the output. The equalisation of the tap outputs compensates the losses of the coaxial cable. Available in different tap-off attenuation values.
Applications
SMATV installations with a tree-shaped distribution. The tree-shaped distribution reduces the number of distribution elements, and reduces the metres of coaxial cable to be installed, even though the headend to outlet distances remain constant. For installation in buildings with many floors due to the low through loss of the tap-offs.
Characteristics
Voltage blockage in the tap-offs. Shielded zamak chassis and metal plate. Connectors on the lower part to facilitate the connections. Reduced dimensions. Fits in a 100×100 mm box.
Downloads
Technical specification
Technical specification
Manuals
– pdf 362.82 KB
Catalogues
CATALOGUE_ALCAD_EN_MULTIMEDIA_TV pdf 5.42 MB
Technical specifications
-
Alcad FD-413 Tap-off if 4 out 13db equalized
KSh4,574.00Add to cartAlcad FD-413 – Serie 906: Tap-off if 4 out 13db equalized.
Equalised tap-offs for terrestrial and satellite TV with four tap outputs which cover the 5 to 2,400 MHz frequencies. They distribute part of the input signal to their tap outputs and the main part of the signal continues to the output. The equalisation of the tap outputs compensates the losses of the coaxial cable. Available in different tap-off attenuation values.
Applications
SMATV installations with a tree-shaped distribution. The tree-shaped distribution reduces the number of distribution elements, and reduces the metres of coaxial cable to be installed, even though the headend to outlet distances remain constant. For installation in buildings with many floors due to the low through loss of the tap-offs.
Characteristics
Voltage blockage in the tap-offs. Shielded zamak chassis and metal plate. Connectors on the lower part to facilitate the connections. Reduced dimensions. Fits in a 100×100 mm box.
Downloads
Technical specification
Technical specification
Manuals
– pdf 362.82 KB
Catalogues
CATALOGUE_ALCAD_EN_MULTIMEDIA_TV pdf 5.42 MB
Technical specifications
-
Alcad FD-419 Tap-off if 4 out 19db equalized
KSh4,574.00Add to cartAlcad FD-419 – Serie 906: Tap-off if 4 out 19db equalized.
Equalised tap-offs for terrestrial and satellite TV with four tap outputs which cover the 5 to 2,400 MHz frequencies. They distribute part of the input signal to their tap outputs and the main part of the signal continues to the output. The equalisation of the tap outputs compensates the losses of the coaxial cable. Available in different tap-off attenuation values.
Applications
SMATV installations with a tree-shaped distribution. The tree-shaped distribution reduces the number of distribution elements, and reduces the metres of coaxial cable to be installed, even though the headend to outlet distances remain constant. For installation in buildings with many floors due to the low through loss of the tap-offs.
Characteristics
Voltage blockage in the tap-offs. Shielded zamak chassis and metal plate. Connectors on the lower part to facilitate the connections. Reduced dimensions. Fits in a 100×100 mm box.
Downloads
Technical specification
Technical specification
Manuals
– pdf 362.82 KB
Catalogues
CATALOGUE_ALCAD_EN_MULTIMEDIA_TV pdf 5.42 MB
Technical specifications
-
Alcad FD-425 Tap-off if 4 out 26db equalized
KSh4,574.00Add to cartAlcad FD-425 – Serie 906: Tap-off if 4 out 26db equalized.
Equalised tap-offs for terrestrial and satellite TV with four tap outputs which cover the 5 to 2,400 MHz frequencies. They distribute part of the input signal to their tap outputs and the main part of the signal continues to the output. The equalisation of the tap outputs compensates the losses of the coaxial cable. Available in different tap-off attenuation values.
Applications
SMATV installations with a tree-shaped distribution. The tree-shaped distribution reduces the number of distribution elements, and reduces the metres of coaxial cable to be installed, even though the headend to outlet distances remain constant. For installation in buildings with many floors due to the low through loss of the tap-offs.
Characteristics
Voltage blockage in the tap-offs. Shielded zamak chassis and metal plate. Connectors on the lower part to facilitate the connections. Reduced dimensions. Fits in a 100×100 mm box.
Downloads
Technical specification
Technical specification
Manuals
– pdf 362.82 KB
Catalogues
CATALOGUE_ALCAD_EN_MULTIMEDIA_TV pdf 5.42 MB
Technical specifications
-
Read moreAlcad PT-320 – Serie 907: If user acces point, if splitter 3 out.
User access point for terrestrial and satellite TV. It has two inputs and three outputs. One of the inputs remains connected to the outputs while the other input is permanently connected to a 75 ohm load. Designed for the 5-2,400 MHz frequency range. Also available in 2-, 4-, 5-, 6- and 8-output models.
Applications
Designed for TV installations with two coaxial cables in which distribution to the houses is performed with a single coaxial cable. The signal which is distributed to the house is selected by changing the connections of the coaxial cables at the user access point.
Characteristics
Voltage blockage in the output connectors. No return path. Shielded zamak and metal plate chassis. F type connectors in machined zamak which form part of the chassis. Reduced dimensions.
Downloads
Technical specification
Technical specification
-
Read moreAlcad PT-420 – Serie 907: If user acces point, if splitter 4 out.
User access point for terrestrial and satellite TV. It has two inputs and four outputs. One of the inputs remains connected to the outputs while the other input is permanently connected to a 75 ohm load. Designed for the 5-2,400 MHz frequency range. Also available in 2-, 3-, 5-, 6- and 8-output models.
Applications
Designed for TV installations with two coaxial cables in which distribution to the houses is performed with a single coaxial cable. The signal which is distributed to the house is selected by changing the connections of the coaxial cables at the user access point.
Characteristics
Voltage blockage in the output connectors. No return path. Shielded zamak and metal plate chassis. F type connectors in machined zamak which form part of the chassis. Reduced dimensions.
Downloads
Technical specification
Technical specification
Catalogues
CATALOGUE_ALCAD_EN_MULTIMEDIA_TV pdf 5.42 MB
Technical specifications
-
Read moreAlcad PT-520 – Serie 907: If user acces point, if splitter 5 out.
User access point for terrestrial and satellite TV. It has two inputs and five outputs. One of the inputs remains connected to the outputs while the other input is permanently connected to a 75 ohm load. Designed for the 5-2,400 MHz frequency range. Also available in 2-, 3-, 4-, 6- and 8-output models.
Applications
Designed for TV installations with two coaxial cables in which distribution to the houses is performed with a single coaxial cable. The signal which is distributed to the house is selected by changing the connections of the coaxial cables at the user access point.
Characteristics
Voltage blockage in the output connectors. No return path. Shielded zamak and metal plate chassis. F type connectors in machined zamak which form part of the chassis. Reduced dimensions.
Downloads
Technical specification
Technical specification
Catalogues
CATALOGUE_ALCAD_EN_MULTIMEDIA_TV pdf 5.42 MB
Technical specifications
-
Read moreAlcad PT-620 – Serie 907: If user acces point, if splitter 6 out.
User access point for terrestrial and satellite TV. It has two inputs and six outputs. One of the inputs remains connected to the outputs while the other input is permanently connected to a 75 ohm load. Designed for the 5-2,400 MHz frequency range. Also available in 2-, 3-, 4-, 5- and 8-output models.
Applications
Designed for TV installations with two coaxial cables in which distribution to the houses is performed with a single coaxial cable. The signal which is distributed to the house is selected by changing the connections of the coaxial cables at the user access point.
Characteristics
Voltage blockage in the output connectors. No return path. Shielded zamak and metal plate chassis. F type connectors in machined zamak which form part of the chassis. Reduced dimensions.
Downloads
Technical specification
Technical specification
Catalogues
CATALOGUE_ALCAD_EN_MULTIMEDIA_TV pdf 5.42 MB
Technical specifications
-
Alcad SB-003 Supl. surface mounting
KSh544.00Add to cartAlcad SB-003 – Serie 907: Supl. surface mounting.
Accessory for mounting outlets on a surface.
Downloads
Technical specification
Technical specification
Manuals
– pdf 611.12 KB
Catalogues
CATALOGUE_ALCAD_EN_MULTIMEDIA_TV pdf 5.42 MB
Technical specifications
-
-
Black outdoor chest – small model Televes
KSh1,614.00Add to cartExternal black box where you can enter the shunts, distributors and other elements that, by the design of your installation are outside your home, so you need protection from the weather. Televes 4177
-
Blind cover T.0X Televes
KSh3,634.00Add to cartT.0X Blind embellishing plate. 50mm – 5U. Front panel in white in 19″ format. Televes 5673
-
BT Terminal Board 10 Pairs (Box 5 units) Televes
KSh6,776.00Add to cartThe 10-pair terminal blocks are designed to accommodate and connect up to 10 pairs of telephone cable (2×10 contacts) by displacing their insulation. Supplied in boxes of 5 units.
-
Read moreThe 5-pair terminal blocks are designed to accommodate and connect up to 5 pairs of telephone cable (2×5 contacts) by displacing their insulation. Supplied in boxes of 5 units.
-
Add to cartDesigned to be wall-mounted in the main distribution point (dry environment indoors), and it allows the insertion of female RJ45/Coax connectors.
-
Identification cover 10 pairs (Box 20 units) Televes
KSh16,020.00Add to cartIdentifying cover. For strip of 10 pairs. Cover that allows to identify each one of the pairs independently. Supplied in boxes of 20 units.
-
Add to cartIKUSI ARP-006. 19″rack cabinets with glass front door
Features
6 pcs wall racks for small installations.
One-piece chassis that gives it great robustness.
The interior guides are adjustable in depth and the sides are accessible, thus providing great versatility and functionality.
Technical specifications
MODEL ARP-006 ARP-012
Ref. 8228 8229
Height units 6U 12U
Material SPCC Cold Rolled Steel
Colour Black RAL9005
Thickness 2 mm
Static charge 60 kg
Front door Kind Glass door
Lock Spring lock
Rear panel Kind Yes
Lock Not
Removable side panel Yes (with key)
Upper cable entry Yes
Bottom cable entry Yes
Wall bracket Yes
Vertical racks Quantity 4
U marking Printed
Fixing screws U twenty
IP twenty
Measures Width 600 mm 600 mm
Deep 400 mm 600 mm
High 6U) 370 mm (12U) 635 mmMANUAL / DATASHEET
-
Add to cartIKUSI ARP-012. 19″rack cabinets with glass front door
Features
6 pcs wall racks for small installations.
One-piece chassis that gives it great robustness.
The interior guides are adjustable in depth and the sides are accessible, thus providing great versatility and functionality.
Technical specifications
MODEL ARP-006 ARP-012
Ref. 8228 8229
Height units 6U 12U
Material SPCC Cold Rolled Steel
Colour Black RAL9005
Thickness 2 mm
Static charge 60 kg
Front door Kind Glass door
Lock Spring lock
Rear panel Kind Yes
Lock Not
Removable side panel Yes (with key)
Upper cable entry Yes
Bottom cable entry Yes
Wall bracket Yes
Vertical racks Quantity 4
U marking Printed
Fixing screws U twenty
IP twenty
Measures Width 600 mm 600 mm
Deep 400 mm 600 mm
High 6U) 370 mm (12U) 635 mmMANUAL / DATASHEET
-
Add to cartTelephone distribution box. Includes telephony frame 10 strips of 10 pairs. Includes inner frame for clamping strips. With door and key.
TECHNICAL SPECIFICATIONS
-
Ikusi BAS-002 Rack 19″ 2U x 500 x 300 mm
KSh5,794.00Add to cartIKUSI BAS-002. 19″ wall rack racks
Characteristics
19 “rack structure of a basic piece for wall installation, totally open.
Oriented to installations where a low static load is sufficient and the protection of the equipment is provided by other enclosures.
Technical specifications
MODEL BAS-002 BAS-004 BAS-006
Ref. 8225 8226 8227
Height units 2U 4U 6U
Material SPCC Cold Rolled Steel
Colour Black RAL9005
Thickness 2 mm
Mounting hardware included (4x) M6 metal screw and plug
(12x) M6 screw assembly
+ plastic washer
+ cage nut
Measures Width 500 mm 500 mm 500 mm
Deep 250 mm 250 mm 250 mm
High 89 mm 178 mm 267 mmMANUAL / DATASHEET
-
Ikusi BAS-004 Rack 19″ 4U x 500 x 300 mm
KSh9,424.00Add to cartIKUSI BAS-004. 19″ wall rack racks
Characteristics
19″ rack structure of a basic piece for wall installation, totally open.
Oriented to installations where a low static load is sufficient and the protection of the equipment is provided by other enclosures.
Technical specifications
MODEL BAS-002 BAS-004 BAS-006
Ref. 8225 8226 8227
Height units 2U 4U 6U
Material SPCC Cold Rolled Steel
Colour Black RAL9005
Thickness 2 mm
Mounting hardware included (4x) M6 metal screw and plug
(12x) M6 screw assembly
+ plastic washer
+ cage nut
Measures Width 500 mm 500 mm 500 mm
Deep 250 mm 250 mm 250 mm
High 89 mm 178 mm 267 mmMANUAL / DATASHEET
-
Ikusi BAS-006 Rack 19? 6U x 500 x 300 mm
KSh13,054.00Add to cartIKUSI BAS-006. 19″ wall rack racks
Characteristics
19″ rack structure of a basic piece for wall installation, totally open.
Oriented to installations where a low static load is sufficient and the protection of the equipment is provided by other enclosures.
Technical specifications
MODEL BAS-002 BAS-004 BAS-006
Ref. 8225 8226 8227
Height units 2U 4U 6U
Material SPCC Cold Rolled Steel
Colour Black RAL9005
Thickness 2 mm
Mounting hardware included (4x) M6 metal screw and plug
(12x) M6 screw assembly
+ plastic washer
+ cage nut
Measures Width 500 mm 500 mm 500 mm
Deep 250 mm 250 mm 250 mm
High 89 mm 178 mm 267 mmMANUAL / DATASHEET
-
Ikusi CFH-100 Set 5 pcs of Keystone adapter
KSh2,164.00Add to cartSet 5 pcs of Keystone FF female adapter + washers + FF splicer.
They are used to be used with the empty panel PPU-048.
-
Add to cartLabel holder cover for FB-10PL double cover.
TECHNICAL SPECIFICATIONS
INSTALLATION MANUAL
-
-
Add to cartCable gland panel with cable guide for 19″ rack 1 unit high in black and with dust brush in the cable gland slots.
-
-
-
Ikusi SRT-100 Rack for 10 strips of 10 pairs
KSh1,320.00Add to cart100 pr stainless steel frame (10 strips x 10 pr).
TECHNICAL SPECIFICATIONS
INSTALLATION MANUAL
-
Add to cart2-way broadband / 2 DC / 5-2340 MHz splitter
Indoor Broadband Splitter – Compatible with Broadband LNBs
Characteristics
2-way broadband splitter
Low insertion loss
Nickel plated zinc die-cast housing
Type “F” connectors
DC power pass-through on all ports (diode protection)
Specifications
4502
Departures – two
Frequencies MHz 5-2340
Loss of passage dB 6.5
Isolation dB 16
Lost return in / out dB 10
DC current step (out / in) – two
Dimensions (mm) mm 47x56x21 -
Add to cart3-way broadband / 3 DC / 5-2340 MHz splitter
Indoor Broadband Splitter – Compatible with Broadband LNBs
Characteristics
3-way broadband splitter
Low insertion loss
Nickel plated zinc die-cast housing
Type “F” connectors
DC power pass-through on all ports (diode protection)
Specifications
4503
Departures – 3
Frequencies MHz 5-2340
Loss of passage dB eleven
Isolation dB twenty
Lost return in / out dB 10
DC current step (out / in) – 3
Dimensions (mm) mm 47x77x21 -
Add to cart4-way broadband / 4 DC / 5-2340 MHz splitter
Indoor Broadband Splitter – Compatible with Broadband LNBs
Characteristics
4-way broadband splitter
Low insertion loss
Nickel plated zinc die-cast housing
Type “F” connectors
DC power pass-through on all ports (diode protection)
Specifications
4504
Departures – 3
Frequencies MHz 5-2340
Loss of passage dB eleven
Isolation dB twenty
Lost return in / out dB 10
DC current step (out / in) – 4
Dimensions (mm) mm 47x77x21 -
Add to cartWideband 6 way splitter / 6 DC / 5-2340 MHz
Wideband Indoor Splitter?- Compatible with Wideband LNBs
Features
6-way wideband splitter
Low insertion loss
Nickel plated zinc diecast housing
“F”- type connectors
DC power pass on all ports (diode protection)
Specifications
? ? 4506
Outputs ? 6
Frequency MHz 5-2340
Insertion loss dB 16
Isolation dB 20
Return loss in/out dB 10
DC power pass (out/in) ? 6
Dimensions (mm) mm 57x120x25 -
Add to cartWideband 8 way splitter / 8 DC / 5-2340 MHz
Wideband Indoor Splitter?- Compatible with Wideband LNBs
Features
8-way wideband splitter
Low insertion loss
Nickel plated zinc diecast housing
“F”- type connectors
DC power pass on all ports (diode protection)
Specifications
? ? 4508
Outputs ? 8
Frequency MHz 5-2340
Insertion loss dB 18
Isolation dB 20
Return loss in/out dB 10
DC power pass (out/in) ? 8
Dimensions (mm) mm 57x120x25 -
Mininode F.O. FiberKom CATV OLC (2 fibres) Televes
KSh81,152.00Add to cartOur range of FiberKom? includes units which operate in different return channel bands and/or modules that comprise one or two fibres
