Category: Satellite
Satellite
Showing 1–160 of 376 results
-
-
-
-
Read moreFiber optic distribution accessory that allows the interconnection of different fiber optic networks. It incorporates a self-locking cover as a protection and greater flexibility of use (more than 1000). High reliability Low return losses thanks to the polished APC. Easy installation thanks to the SC type connector. Effective data transmission
-
Read moreGalvanized “Y” support, for wall or floor installation (551x439mm or 620x247mm / ? 60mm x Thickness 1.5mm). Ideal for QSD parabolas.
-
Read moreHigh power switched-mode PSU, flyback type, high efficiency (> 85%) and capable of delivering 5A at 24V (120W).
-
Read moreCovering three wavelengths (1310, 1490, and 1550nm), the OPS-3L will meet the requirements of just about every application you might encounter. Pairs with the H-Series System Analyzers and automatically measures your optical plant loss.
-
Read moreDesigned for mitigation and flatness testing in BIS installations;Rotary switch that selects the various modes of operation,Generates a scan between 950 and 2150 MHz, thus covering all the Satellite Intermediate Band.
-
Read moreInternal splitter with easyF flange connection system that combines the advantages of the flange and the F connector in a single type of connection that saves connection time and money to the installer. See mechanical details.
-
Read moreTeleves keeps leading the way with this new meter, designed to meet the requirements of TV installers for both satellite and terrestrial signals.?Light-weight handheld meter.?User friendly interface.?Simplified use with only 8 buttons.?Multi standard.?Traffic light system for all measurements. Televes 593302
-
Read moreLight and robust equipment with a complete range of tools to ensure the quality of a TV installation with signals in both the satellite (DVB-S/S2) and terrestrial (DVB-T/T2 or DVB-C). It allows to update the options of the meter through software under license. Customize it with the standards you are going to measure and pay only for what you need. Televes 5933031
-
Read moreDomestic amplifiers for MATV applications, featuring high power and low consumption.,Fully automatic production.,50% lower power consumption than an standard amplifier.,Low noise figure.,Adjustable gain.,Up to 5 outputs.,LTE ready.,Blister.
-
-
Read moreHigh power switched-mode PSU, flyback type, high efficiency (> 85%) and capable of delivering 2.5A at 24V (60W), Equipped with two outputs monitored by LEDs to indicate the status of the voltage delivered, Detects either overload or short-circuit, It offers protection against output voltage variation.
-
Read moreTransmodulator that generates a DTT multiplex from services whose origin is a TVSAT transponder in either DVBS (QPSK) or DVBS2 (QPSK /8PSK) modulation formats.
-
Read moreT.0X AMPLIF. 47…862MHz G44dB Vs120dB?V Televes 5575. Low distortion of second and third order that allow high output voltage (typical values of 120 dB?V). It has two signal inputs. Equipped with test output.
-
Read moreThe bandwidth of the coaxial cable makes it possible to couple other services to conventional television signals without deterioration. Televes 769203
-
Read moreThe Optical Network Terminal or ONT is the device in charge of delivering the operator services subscribed by the user. The terminal range conforms to installation and implemented services criteria; Televes has up to 4 ONT ranges of products (Basic, Standard, Office and Home).
-
Read moreThe CoaxData system enables the use of coaxial, PLC or fibre optics?networks to distribute Internet services to a certain number of points,?providing a non-invasive distribution system that preserves the quality?of the transmission.
-
Read moreEquipped with high quality and precision components, this cleaver provides a perfect cut (90?), which usually generates a perfect fusion (0,01dB). The work process is facilitated by the assisted opening of the cutter. In addition, it includes a blade slider per magnet, which prevents premature tool wear.
-
-
Read moreAre housed in a die-cast chassis with ?F? connectors; Allow the passage of current from the SAT IF output to the input; The 7452 reference may also be used as a filter for GSM telephony, thanks to its high rejection TV-IF; Mast mounting for ref. 7452 using the outdoor case ref. 4163; ?F? Connection.
-
Read moreOptical fiber transmitter, which generates an optical output signal of 1310nm of wavelenght with an RF input. It is possible to obtain an optimal output signal working with low input levels (79 & 95 dB?V / 19 & 35 dBmV). The FiberKom design, which is made of Zamak, provide great robustness and shielding. This desing offers a wall assembly for separately installation also.
-
Read moreThe device includes the software required for CoaxData network management. A powerful CPU allows the quick and efficient processing of the management and monitoring tasks.?Displays the status of each CoaxData device. Equipped with a self-provisioning function. Simple and intuitive web interface.
-
Read moreThis module allows multiplexing/demultiplexing of the different wavelengths: (Data 1310/1490nm & RF Overlay 1550nm), so its main function is to separate the lambdas before the ONT/ONU (Optical Network Terminal/Unit).?It also allows to mix the Data signal and the RF Overlay signal and deliver the two lambdas through a single fibre.
-
-
Read moreThe coaxial backbones of? the operator networks are being replaced with optical fibre lines. The optical network ends where the subscriber’s coaxial network is serviced. These networks that use both transmission media are known as HFC networks (Hybrid Fibre Coaxial).
An element is required to work as an interface between the optical backbone and the coaxial network where both media meet; this device is the Optical Node.
This device transforms the downstream optical signal into a radio-frequency signal; furthermore, it transforms the radio-frequency? signal produced by the cable-modem and/or the? user’s STB (return channel) into an upstream optical signal.
Occasionally, when communication is exclusively downstream, an optical receiver is installed instead of the optical node to transform optical signals into radio-frequency signals.
Optical nodes and receivers from Telev?s include OLC (Optical Level Control), a system capable of preserving the radio-frequency signal regardless of the optical input
Main features
Equipped with OLC (Optical Level Control), which automatically regulates its parameters to provide a constant output level regardless of? the channel load
Configurable return channel with attenuator and equalizer
Forward channel with independent attenuation and equalization adjustment between stages
High output voltage, low power consumption
Perfect for RF Overlay, FTTB and FTTC applications
Parameter values are adjusted using plug-in jumpers at the front of the equipment (equalization, attenuation, etc.)
Test socket
Full bandwidth optical reception
Aluminium-manufactured, the chassis ensures durability in outdoor installations
Specs
References 231220
?Forward Path
?Bandwidth MHz 40 … 1006
?Optical Input Level for the OLC dBm -8 … +1
?Flatness dB ? 0.75
?Outputs (selectable) 1 or 2
?Output signal level with OLC enabled, Output 1 dB?V 113
?CNR/CSO/CTB dB >52/>60/>60
?Input attenuator dB 4/6
?Inter stage attenuator dB 1/2/3/4/5/6/7/8
?Output level slope dB 4/9
?Wavelength nm 1200 – 1600
?Return Path
?Bandwidth (selectable) MHz –
?Optical output level dBm –
?Flatness dB –
?RF input level dB?V –
?Wavelength nm –
?General
?Local mains voltage V~ 99 – 253
?Max. consumption with local/remote powering W 16.5
?Current max. consumption (local powering) mA 300
?Dimensions mm 232 x 90 x 140
?Weight g 1825
?Index Protection IP 61
More info
OFFICIAL PAGE -
Read moreSAT receiving devices (IF) and DAB / DVB signals via fiber optics and coaxial delivered as SAT (IF) in QUAD format (4 output polarities + terrestrial)
Connectorization input FC / PC and singlemode fiber.
Local or remote power by any of the outputs.
Ref. 236901 (QUAD) replicated in the outputs, the function of a standard LNB QUAD.
Complement of optical LNB systems (ref.2353, ref.236801) that recovers the original RF signal, delivering four independent outputs. In each the terrestrial signal and the TVSAT signal are tuned by the combination of tone of 22kHz and continuous voltage (13-18V).Specs
Ref. 236903 = OMS4TSN
Salida RF
HF-Ausgang Satellite ?
Horizontal High Band ? MHz 1100 – 2150 >15.5V + 22KHz
Vertical High Band ? MHz 1100 – 2150 <14.5V + 22KHz Horizontal Low Band ? MHz 950 - 1950 >15.5V
Vertical Low Band ? MHz 950 – 1950 <14.5V Return Loss ? dB > 10
Nominal Impedance ? ? 75
Gain Variation Across Band ? dB S 7
Terrestrial Rejection ? dB 30
Typical Outputs Levels ? dB?V 70 *
FM/DAB/DTT ?
RF Frequency Range ? MHz 88 – 790
FM 88 – 108
DAB174 – 240
DTT 470 – 790
Return Loss ? dB > 10
Nominal Impedance ? ? 75
Gain Variation Across Band ? dB S 5
Satellite Rejection ? dB 20
Typical Outputs Levels N? Multiplexes dB?V FM/DTT
1 76
6 72
?General ?Dimensions mm 129 x 117 x 27
?Weight gr 330
? -
Read moreThis complement of systems with optical LNB, receives an optical signal from TV (1100-1650nm) and recovers the original RF signal. It offers 5 RF outputs: one for terrestrial TV and another 4 for satellite TV in Quattro mode, that is, delivering one of the four TVSAT polarity and band combinations to each connector.
Stands out for
Switch to regulate the satellite gain in three levels: low, medium and high
RF signal presence indicator LED
Accepts terrestrial TV mix (FM / DAB / UHF)
Reduced size
Main features
Optical connectors FC / PC and type F in RF
Specifications
Reference / Art. Nr. 237003 / OMS44TSN
TVSAT
Bands and polarities MHz HORIZONTAL HIGH: 1100 – 2150 ?15.5V + 22kHz
VERTICAL HIGH: 1100 – 2150 ?14.5V + 22kHz
LOW HORIZONTAL: 950 – 1950 ?15.5V
VERTICAL LOW: 950 – 1950 ?14.5V
Terrestrial band rejection dB 30
Output Level dB?V High Gain: 78
Med Gain: 73
Low Gain: 68
FM / DAB / DTT
Frequency range MHz FM: 88 – 108
DAB: 174 – 240
DTT: 470 – 790
TVSAT rejection dB 35
Output levels dB?V 82 @ 1mux
78 @ 6mux
Optical
Wavelength nm 1100 – 1650
Input power dBm min: -12.2
max: -3
Feeding
Network voltage Vdc 10.5 – 20
Consumption mA 500@10.5V
430 @ 12V
260 @ 20V
Mechanical
Optical input kind FC / PC
Storage temperature ?C -20 … 70 -
Read moreSupport “L” RPR wall 284×194 / ?35×1.5mm. Televes 7393
Surface zinc and treated with our RPR process to increase its resistance to corrosion.
-
Read moreBT Terminal Board 10 Pairs Televes.?Supplied in boxes of 5 units.
Block of isulating material. Connection system by shifting the terminal. Connecting elements can be switched off for measurements on both sides without lifting connections. Corrosion resistance according to UNE 2050-2-II standard (CEI 68-2-II). The DC pass between input and output (in both senses) is allowed. Small dimensions.
Features
Block of isulating material.
Connection system by shiftin the terminal.
Connecting elements can be switched off for measurements on both sides without lifting connections.
Corrosion resistance according to UNE 2050-2-II standard (CEI 68-2-II).
The DC pass between input and output (in both senses) is allowed.
Small dimensions.
Specifications
Reference? ?2172
? No. of terminals? 10 x 2
?Insultarion resistance between
?terminals (23?C & R.H. 50%) ?M? ?> 106
?Terminal resistance (to the point of
?cable connection) m? < 10 ?Dielectric strength Vef AC >1000 ? 10%
Vdc >1500 ? 10%
?Corrosion resistance according to UNE 2050-2-II
(CEI 68-2-II)
?Dimensions (Wid x Hei x Dep) mm 122,5x21x40 -
Read moreFeatures
The range of T100 coaxial cables is manufactured using physical expansion that gives them greater protection against adverse environmental conditions, ensuring compliance for longer.
PE cables are used for weather applications.
PVC cables are used for indoor applications
Reference 2126
INNER CONDUCTOR – BRAID COMPOSITION? ?COPPER – CCS (copper-clad steel)
Televes Model T-100
?
?Inner Conductor
? ?? mm ?1,13
?material ?- ?Copper
?resistance ?/Km < 20 ?Dielectric ? ? ?mm ?4,7 ?material ?- ?Foam Polyethylene ?Overlapping shielding foil? ?composition Aluminium + Polyester + Aluminium ?Braid ?resistance ??/Km ?<27 ?material ?- ?CCS (copper-clad steel) ?Antimigrating film?? ?No ?Petrol jelly?? ?No ?Outer sheath ?? mm ?6,6 ?color ? ?White ?material ?- ?PVC ?Minimum bending radius? ?mm ?33 ?Screening efficiency? ?dB ?>75
?Capacitance? ?pF/m ?55
?Environmental use?? ?Indoor
?Packaging ?meters/reel m ?100
????
?
?
?Frequency
Attenuation (MHz)
?
?
?
? ?200 ?
?
?
dB/m
?
?
?
? 0,08
?500 ?0,13
?800 ?0,16
?1000 ?0,19
?1350 ?0,22
?1750 ?0,25
?2050 ?0,28
?2300 ?0,30 -
Read moreCEI connector set with piece assembly system. The connector is disassembled to insert the live and the cable is fixed by reassembling the parts. Compatible with coaxial cable diameters ?5 … 6.9mm.
CEI Male + CEI Female
Stands out for
Detachable and reusable connector
Main Features
Straight format
Tool-free installation -
-
Read moreMaterial Adicional
Manuales T?cnicos:?
TOMA R-TV CON SUPLEMENTO DE PAREDManuales T?cnicos:?
TOMA R-TV CON SUPLEMENTO DE PARED -
Read moreFeatures
The sockets and junction boxes incorporate a new flange model whose main advantage is to facilitate the visualization of the connection in locations where the socket is close to the ground.The live tightening design has been improved to meet the specifications of the cable operators. With this improvement, the pressure system would meet the following specifications:
For a minicable of 4.4 mm of total diameter, the supported weight would be:
greater than 4 kg with live fastening and mesh.
greater than 2 kg with only live support.
For a cable type T100, the supported weight would be:greater than 12 Kg with live fastening and mesh.
greater than 5 Kg with holding only live.
Shield indication is entered in the chassis.Specs
R?f. Bande Att?nuation (dB) DC current through(350 mA)
VR FM VHF UHF BIS Insertion Losses
MHz 5…65 87,5…108 125…470 470…862 950…2150 MATV SAT
5227 TV/FM 13 13,5 1,2 2
IN – OUTOUT -> IN
SAT 13 14
Additional Infomation
Technical manuals:?
SHEETTechnical manuals:?
SHEET -
Read moreFeatures
The sockets and junction boxes incorporate a new flange model whose main advantage is to facilitate the visualization of the connection in locations where the socket is close to the ground.The live tightening design has been improved to meet the specifications of the cable operators. With this improvement, the pressure system would meet the following specifications:
For a minicable of 4.4 mm of total diameter, the supported weight would be:
greater than 4 kg with live fastening and mesh.
greater than 2 kg with only live support.
For a cable type T100, the supported weight would be:greater than 12 Kg with live fastening and mesh.
greater than 5 Kg with holding only live.
Shield indication is entered in the chassis.Specs
R?f. Bande Att?nuation (dB) DC current through(350 mA)
VR FM VHF UHF BIS Insertion Losses
MHz 5…65 87,5…108 125…470 470…862 950…2150 MATV SAT
5227 TV/FM 8,5 9 3.5 5
IN – OUTOUT -> IN
SAT 7,5 10
Additional Infomation
Technical manuals:?
SHEETTechnical manuals:?
SHEET -
Read moreFeatures
The sockets and junction boxes incorporate a new flange model whose main advantage is to facilitate the visualization of the connection in locations where the socket is close to the ground.The live tightening design has been improved to meet cable operators’ specifications. With this improvement, the pressure system would meet the following specifications:
For a minicable of 4.4 mm of total diameter, the supported weight would be:
Greater than 4 kg with live and mesh fastening.
Greater than 2 kg with only live support.
For a type T100 cable, the supported weight would be:Greater than 12 kg with live fastening and mesh.
Greater than 5 kg with only live support.
Shield indication is entered in the chassis.Specs
Reference
? Losses (dB )
?Tap losses Insertion losses ?DC current through
Band Ret./BI FM VHF UHF
MHz 5…68 87.5…108 109…470 470…862
470…790 5… 862
?5230 TV 4,5 – NO
FM 18
Additional Infomation
Technical manuals:?
SHEETTechnical manuals:?
SHEET -
Read moreFeatures
The sockets and junction boxes incorporate a new flange model whose main advantage is to facilitate the visualization of the connection in locations where the socket is close to the ground.The live tightening design has been improved to meet cable operators’ specifications. With this improvement, the pressure system would meet the following specifications:
For a minicable of 4.4 mm of total diameter, the supported weight would be:
Greater than 4 kg with live and mesh fastening.
Greater than 2 kg with only live support.
For a type T100 cable, the supported weight would be:Greater than 12 kg with live fastening and mesh.
Greater than 5 kg with only live support.
Shield indication is entered in the chassis.Specs
Reference
? Losses (dB )
?Tap losses Insertion losses ?DC current through
Band Ret./BI FM VHF UHF
MHz 5…68 87.5…108 109…470 470…862
470…790 5… 862
?5231 TV 9,5 1,3 NO
FM 24
Additional Infomation
Technical manuals:?
SHEETTechnical manuals:?
SHEET -
Read moreA simple push is enough to connect the inner conductor, no screws needed.
Allows the visualization of the connection.
Support an inner conductor with diameters ranging from ? 0,65 to ? 1,2 mm.
Support an outdoor cable with a diameter ranging from ? 5 to ? 6.9 mm.
Compliant with the European guidelines 2004/108/CEE and 2006/95/CEE.
The outlets with data connection are compatible with DOCSIS 3.0
Reference
? Losses (dB )
?Tap losses Insertion losses ?DC current through
Band Ret./BI FM VHF UHF
MHz 5…68 87.5…108 109…470 470…862
470…790 5… 862
?5232 TV 0,5 – 0,5 – NO
FM – 3 –
Additional Infomation
Technical manuals:?
SHEETTechnical manuals:?
SHEET -
Read moreA simple push is enough to connect the inner conductor, no screws needed.
Allows the visualization of the connection.
Support an inner conductor with diameters ranging from ? 0,65 to ? 1,2 mm.
Support an outdoor cable with a diameter ranging from ? 5 to ? 6.9 mm.
Compliant with the European guidelines 2004/108/CEE and 2006/95/CEE.
The outlets with data connection are compatible with DOCSIS 3.0 -
Read moreSteel mast holders are reinforced to support configurations of significant height (200m approx.) or subject to high loads and adverse weather conditions. Highlights Anchoring system based on plates and union nuts Outstanding stiffness and mechanical strength Solid tube, no internal corrosion Maximum height of the 550 XL tower: 200m (as per calculation conditions) Features The …
Top mast holder Hot-Dip Galvanizing + Painting 550 XL series TelevesRead More
-
Read moreThis product is not sent to some countries or areas, if the cart does not have available carriers, you can contact us here 3m lower section pivoting for the erection of a 550-series tower.?The section is painted red (RAL 3020).?Guy wires are required for pivoting sections. Highlights Anchoring system with union nuts 550 tower maximum …
Bottom section tilting Zinc + Painting Red 3m turret series 550 TelevesRead More
-
Read moreThis product is not sent to some countries or areas, if the cart does not have available carriers, you can contact us here 3m lower section pivoting for the erection of a 550 XL-series tower. The section is painted red (RAL 3020).? Guy wires are required for pivoting sections. Highlights Anchoring system based on plates …
Bottom section tilting G.C + Painting Red 3m turret series 550 XL TelevesRead More
-
-
Read moreThis product is not sent to some countries or areas, if the cart does not have available carriers, you can contact us here 3m middle section for the erection of a 550 XL series tower. Highlights Anchoring system based on plates and union nuts Outstanding stiffness and mechanical strength Solid tube, no internal corrosion Maximum …
Intermediate section G.C + Painting Red turret series 550 XL 3m TelevesRead More
-
Read moreThis product is not sent to some countries or areas, if the cart does not have available carriers, you can contact us here 3m middle section for the erection of a 550 XL series tower. Highlights Anchoring system based on plates and union nuts Outstanding stiffness and mechanical strength Solid tube, no internal corrosion Maximum …
Intermediate section G.C + Painting White turret series 550 XL 3m TelevesRead More
-
Read morePivoting embedded base with articulated anchoring system for a 550 XL range guy-wired braced tower. Highlights Anchoring system based on plates and union nuts Outstanding stiffness and mechanical strength Solid tube, no internal corrosion Maximum height of the 550 XL tower: 200m (as per calculation conditions) Features Pivoting: guy-wire system installation The hot galvanizing surface …
Base flush-mounted flush G.C + Paint Red turret series 550 XL TelevesRead More
-
-
Read moreFast F professional connector with compression mounting system. It offers good shielding. For cables: SK2000plus, SK2003plus, SK110plus, SK100plus, SK6Fplus, T100plus, T100, CXT, CXT-1, CXT-60 Stands out for Good shielding against interference Firm and robust connection Features Layered format Installation with compression tool
-
Read moreCoaxial cable with live and mesh made of copper (Cu / Cu) with excellent braiding coverage (82%). It is triple shielded (TSH) so it has a second extra sheet of extra armor. An 18VAtC cable, PVC cover. Stands out for Conductors made of copper Class A shielding Euroclass Eca Features Outer PVC cover in white …
Wooden coil 500m coaxial cable SK2000plus White TelevesRead More
-
Read moreCoaxial cable with live and mesh made of copper (Cu / Cu) with excellent braiding coverage (82%). It is triple shielded (TSH) so it has a second extra sheet of extra armor. An 18VAtC cable, PVC cover. Stands out for Conductors made of copper Class A shielding Euroclass Eca Features Outer PVC cover in white …
Plastic coil 250m coaxial cable SK2000plus White TelevesRead More
-
Read moreCoaxial cable with both conductors made of copper (Cu/Cu) and excellent braid coverage (82%). Triple shielded (TSH) cable, equipped with a second foil for extra shielded. An 18AtC cable with UV-resistant LSFH sheath.?Black. 100m plastic coil. Televes 414002
-
Read morePatch cord for the powering of T.0X modules with T.05 power supply units in the extension of T.05 headends.?0.4m length. Televes 422601
-
Read more4-way splitter and EasyF connection system, for SMATV signals, with a compact design and efficient electronic behavior. It is an indoor installation, but it is also suitable for outdoor use, always inside a?televes-4177?box. Stands out for EasyF connection system: ease of installation and savings in assembly Made in Zamak, great armor High reliability: automated manufacturing …
-
Read moreHigh-quality cable (HDMI) meant to connect any electronic device to the TV (TV receiver, laptop computer, console, etc.) and enjoy high-definition contents (HDTV).?Length of 1.5m. Black. Televes 494501
-
Read moreHigh-quality cable (HDMI) meant to connect any electronic device to the TV (TV receiver, laptop computer, console, etc.) and enjoy high-definition contents (HDTV).?Length of 3m. Black. Televes 494502?
-
Read moreHigh-quality cable (HDMI) meant to connect any electronic device to the TV (TV receiver, laptop computer, console, etc.) and enjoy high-definition contents (HDTV).?Length of 5m. Black. Televes 494503
-
Read moreModular amplifier allowing the adjustment of individual UHF channels (DTT), with very high rejection of adjacent channels (>50 dB). Perfect format for headend mounting, with additional T12-series amplifiers. Stands out for Modular system, which facilitates its expansion, customized configuration, and the replacement of some amplifier Very high gain (adjustable) Features Installation in DIN rail, in …
T12-selective single-channel amplifier T.12 UHF 470-862MHz TelevesRead More
-
Read moreTerminal socket of three connectors. In the lower left is the male CEI/IEC for terrestrial TV, in the lower right the female CEI/IEC for FM (radio) and in the upper part centered an F connector for satellite TV (FI). The lower part of the chassis is open. Stands out for Large rejection filter between terrestrial …
Terminal plug with claws 3 connectors FM-TV-SAT 1.5dB TelevesRead More
-
Read morePlastic embellishing part, to hide a double socket. It is marked with the indication: TV / R-SAT. It consists of a lower part to install an RJ45 socket (Cat. 6), typically to connect a PC, modem, an IPTV box, etc. Stands out for Indications in relief on the embellisher ABS plastic in white (RAL 9001) …
White trim with RJ45 socket 2 TV / R-SAT + DATA Televes connectorsRead More
-
Read more2-lead mini tapper and EasyF connection system, for SMATV signals. Due to its bypass losses (16dB), it is recommended to be installed on floors 2 and 3 (type A). Its innovative ultra-reduced size allows its installation anywhere, including records of small dimensions. In addition, miniturization is also applied in the electronics that it incorporates and …
Mini-diverter 5-2400MHz connector EasyF 2 outputs 16dB type A TelevesRead More
-
Read more2-lead mini tapper and EasyF connection system, for SMATV signals. Due to its bypass losses (21dB), it is recommended to be installed on floors 4 to 6 (type B). Its innovative ultra-reduced size allows its installation anywhere, including records of small dimensions. In addition, miniturization is also applied in the electronics that it incorporates and …
Mini-diverter 5-2400MHz connector EasyF 2 outputs 21dB type B TelevesRead More
-
Read more2-lead mini tapper and EasyF connection system, for SMATV signals. Due to its bypass losses (25dB), it is recommended to be installed on floors 7 to 12 (type C). Its innovative ultra-reduced size allows its installation anywhere, including records of small dimensions. In addition, miniturization is also applied in the electronics that it incorporates and …
Mini-diverter 5-2400MHz connector EasyF 2 outputs 25dB type C TelevesRead More
-
Read more2-way mini splitter with PAU and EasyF connection system, for SMATV signals. Its innovative ultra-reduced size allows its installation anywhere, including records of small dimensions. In addition, miniturization is also applied in the electronics that it incorporates and that improves its electrical behavior and reduces the effect of impulsive noise. The PAU (User Access Point) …
Mini-distributor with PAU 5-2400MHz connector EasyF 2 outputs 4.5/4.3dB TelevesRead More
-
Read more3-way splitter with PAU and EasyF connection system, for SMATV signals, with a compact design and efficient electronic behavior. The PAU (User Access Point) offers an additional charged input for connection of the second downcomer contemplated in an installation made according to the ICT-2 regulation. It is an indoor installation, but it is also suitable …
Distributor with PAU 5-2400MHz EasyF connector 3 outputs 9/8dB TelevesRead More
-
Read more4-lead shunt and EasyF connection system, for SMATV signals, with a compact design and efficient electronic behavior. Due to its bypass losses (12dB), it is recommended to install it on the first floor (type TA). It is an indoor installation, but it is also suitable for outdoor use, always inside a chest (ref 4177). Stands …
Derivador 5-2400MHz connector EasyF 4 outputs 12dB type TA TelevesRead More
-
Read more4-lead shunt and EasyF connection system, for SMATV signals, with a compact design and efficient electronic behavior. Due to its bypass losses (16dB), it is recommended to be installed on floors 2 and 3 (type A). It is an indoor installation, but it is also suitable for outdoor use, always inside a chest (ref 4177). …
Derivador 5-2400MHz connector EasyF 4 outputs 16dB type A TelevesRead More
-
Read more4-way splitter with PAU and EasyF connection system, for SMATV signals, with a compact design and efficient electronic behavior. The PAU (User Access Point) offers an additional charged input for connection of the second downcomer contemplated in an installation made according to the ICT-2 regulation. It is an indoor installation, but it is also suitable …
Distributor with PAU 5-2400MHz EasyF connector 4 outputs 9/7.5dB TelevesRead More
-
Read moreFace plate lid to cover distribution devices equipped with EasyF system. Features Built in ABS plastic White colour (RAL 9010)
-
Read moreDomestic amplifier with 3 outputs (2+TV) and automatic gain adjustment to extend the terrestrial television domestic network.? The TV output provides a lower gain for direct connection to the television set (no socket installation).? Equipped with LTE/4G filtering and input power supply for pre-amplifier or BOSS system feeding. Highlights Plug & Play, no adjustments required: …
Picokom Housing Amplifier 3 outputs (2+TV) 47-790MHz with Televes auto tuningRead More
-
Read more24 V-1.6 A power supply unit for a single T.0X module. Specifications Reference ?562802 Input voltage ?V~ 99 – 138 / 207-253 Frequency Hz 50 / 60 Output voltage V= 24 Max. Output current ?A 1.25 (120V~) 1.6 (230 V~) Temperature range ?C ?5… +45 ?C Protection index IP IP 20 Weight g 100 Dimensions …
24 V-1.6 A power supply unit for a single module TelevesRead More
-
Read moreTransmodulator that generates two QAM (DVB-C) Multiplex from the services available in either a TV SAT transponder or two transponders of the same band and polarization. Televes 563001
-
Read moreEquipped with CI. The transmodulator receives a SAT transponder in DVBS (QPSK) or DVBS2 (QPSK /8PSK) modulation and demodulates it, producing an MPEG-2 transport packet. The MPEG2 transport packet is subsequently modulated in COFDM and converted into the output channel (UHF or VHF, with a 7/8 MHz bandwidth), using an agile up-converter. Televes 563301
-
Read moreThe content generated consists of up to four services since it has four analog composite video inputs (CVBS). They generate DVBT, DVBC (QAM Annex A) or ITUJ83 (QAM Annex B) output. These modules can encode the video in MPEG-2 format or in H.264 (HDTV). Televes 563822
-
Read moreThe generated content consists of two services; each of them can come from up to three types of input format (HDMI, YPbPr components or CVBS composite video). They generate DVBT, DVBC (QAM Annex A) or ITUJ83 (QAM Annex B) output. These modules can encode the video in MPEG-2 format or in H.264 (HDTV). Televes 563832
-
Read moreDevice that has two modes of operation: as an AV -IP/RF Encoder in which it converts Audio / Video signals to an IP stream as well as an RF multiple (DVB-T or DVB-C), and as an AV Encoder / IP – RF where it converts Audio / Video signals and IP streaming services into an RF multiple (DVB-T or DVB-C). Televes 563852
-
Read moreTransmodulator that generates a QAM multiplex from the multiplexing of services available in up to 3 different SAT TV transponders. Extracted from a single satellite through the input loop itself to the header. Televes 564101
-
Read moreTransmodulator that generates a COFDM multiplex from the multiplexing of services available in up to 3 different TV SAT transponders. Extracted from a single satellite through the input loop itself to the header. Televes 564201
-
Read moreTransmodulator that generates two COFDM multiplexes from the multiplexing of services available in up to 3 different TV SAT transponders. These can be extracted from 2 different satellites (2 independent SAT-IF inputs), by means of the input loop to the header itself. Televes 564301
-
Read moreTransmodulator that generates a QAM multiplex from the multiplexing of services available in up to 3 different SAT TV transponders. Extracted from 2 different satellites (2 independent SAT-IF inputs) by the input loop itself to the header. Televes 564401
-
Read moreTransmodulator that generates six QAM multiplexes (DVB-C) from services available on six SAT TV transponders. The inputs can be bridged or independent. In this last case, each TVSAT demodulator can be connected to any of the two inputs. Televes 564501
-
Read moreModule that processes 2 input channels, analog or digital, regardless of the type of service, to function as a channel converter (using different input and output channels) or as an amplifier (with the same input and output channel). Televes 564901
-
Read moreTransmodulator that generates one or two DVB-C multiplexes from the multiplexing of services available in 2 DVB-T or DVB-T2 muxes. Televes 565101
-
Read moreDomestic 1-input HDMI device, which generates a digital multiple with the signal provided by an Audio/Video source. Televes 566001
-
Read moreWall mount of 5U of height, for anchoring in wall, allows to lodge small headers and a power supply. To complete its installation and increase safety, it is possible to screw a protective bar that prevents the CAM from being removed. Televes 567201
-
Read moreAccessory that allows the installation in table or wall of a single module T.0X. Televes 567401
-
Read moreIt allows the installation of active or passive equipment, guaranteeing the absence of external manipulation by locking it under lock and key. Initially designed for installation in main or intermediate registers, it gives a discreet finish to any equipment that is inside. Televes 589301
-
Read moreIt allows the installation of active or passive equipment, guaranteeing the absence of external manipulation by locking it under lock and key. Initially designed for installation in main or intermediate registers, it gives a discreet finish to any equipment that is inside. Televes 589302
-
Read moreIt allows the installation of active or passive equipment, guaranteeing the absence of external manipulation by locking it under lock and key. Initially designed for installation in main or intermediate registers, it gives a discreet finish to any equipment that is inside. Televes 589303
-
Read moreIt allows the installation of active or passive equipment, guaranteeing the absence of external manipulation by locking it under lock and key. Initially designed for installation in main or intermediate registers, it gives a discreet finish to any equipment that is inside. Televes 589304
-
Read moreAllows the installation of active or passive equipment, leaving these accessible. It facilitates the installation of the product and improves the final image of the assembly. The installer can direct the output or input cables, in any direction. Televes 589401
-
Read moreAllows the installation of active or passive equipment, leaving these accessible. It facilitates the installation of the product and improves the final image of the assembly. The installer can direct the output or input cables, in any direction. Televes 589402
-
-
Read moreLight and robust equipment with a complete range of tools to ensure the quality of a TV installation with signals in both the satellite (DVB-S/S2) and terrestrial (DVB-T/T2 or DVB-C). It allows to update the options of the meter through software under license. Customize it with the standards you are going to measure and pay only for what you need. Televes 593303
-
Read moreNevoSwitch amplifier with 5 inputs (one terrestrial and the four polarities of a satellite) that allows increasing the number of users of the installation by optimizing the signal that reaches each one. Amplification approx 12dB in terrestrial and 15dB in satellite. Televes 714508
-
Read moreSupport type “Y” with two positions (screwed), for installation of antennas on wall with a separation of 473mm, or on ground with a height of 720mm. The tube has ? 45mm and thickness 1.5mm. Manufactured in galvanized steel. Televes 719202
-
Read moreDevice that converts alternating current into direct current to feed the multiswitch. Televes 732802
-
Read moreTubular support type “inverted T” for installation of antennas in ground (screwed), with a height of 1m. The tube has ?48mm and thickness 2.9mm. Manufactured in hot galvanized steel, it offers an excellent resistance to corrosion that guarantees the longest weathering. Televes 757602
-
Read moreDevice that directs data traffic from an ethernet interface to a coaxial network, PLC and/or SFP so that, at the other end, another similar device performs the reverse conversion and recovers the original ethernet connection. It allows to distribute internet signal through antenna cable, through the electrical network (PLC) or through an optical fiber interface (SFP). Televes 769202
-
Read moreMedia adapter that allows it to be connected to the Ethernet input of a CoaxData device so that it has access to an ethernet signal via fiber optics. Televes 769210
-
Read moreThe diplexer filter eliminates the noise in the return channel from the headend and increases the performance of the data in the coaxial network. The low pass filtering is 2 … 68MHz, and the high pass of 87 … 2150MHz. Televes 769220
-
Read moreCategory 6 and Euroclass Dca data cable, type F/UTP (shielded cable with unshielded pairs), with copper conductor and cover of LSFH (Low Smoke Free of Halogen) in violet color (RAL 4008). It is supplied in a 500m wooden reel. Televes 212101
-
Read moreDesigned to act as a distribution point for fiber optic hoses. It is usual to use it in FTTH or FTTR projects, facilitating the interconnection between the own network and the operator’s network (typical installation in the RITI). It allows to install several records jointly, maintaining the possibility of interconnection between them. Up to 48 female-female adapters. Televes 233003
-
Read morePlastic coil 100m coaxial cable with live and mesh made of copper (Cu / Cu) with excellent braiding coverage (82%). It is triple shielded (TSH) so it has a second extra sheet of extra armor. An 18AtC cable, of LSFH cover resistant to UV rays. Euroclass B2ca and A ++ class shielding. Televes 413910
-
Read morePlastic coil 250m coaxial cable with live and mesh made of copper (Cu / Cu) with excellent braiding coverage (82%). It is triple shielded (TSH) so it has a second extra sheet of extra armor. An 18AtC cable, of LSFH cover resistant to UV rays. Euroclass B2ca and A ++ class shielding. Televes 413911
-
Read moreWood coil 500m coaxial cable with live and mesh made of copper (Cu / Cu) with excellent braiding coverage (82%). It is triple shielded (TSH) so it has a second extra sheet of extra armor. An 18AtC cable, of LSFH cover resistant to UV rays. Euroclass B2ca and A ++ class shielding. Televes 413912
-
Read moreTerminal socket with three connectors and 2 inputs. It consists of two connectors F: SAT1 for the satellite signal of input 1 (filtered), and SAT2 for the satellite and terrestrial signal of input 2 (all band 5-2400MHz). CEI male connector for radio (FM) and terrestrial TV, coming from input 1 of the socket. The lower part of the chassis is open. Televes 524501
-
Read moreLine multiband amplifier (1 input/1 output) for SMATV/CATV systems. Separate amplification guarantees the absence of intermodulation among inputs and independent attenuators per band (terrestrial and satellite).?Televes 531710
-
Read moreDevice that allows the combination of T.0X modules without Z output loop through, providing an optimal C/N for headends with high channel density. Televes 565002
-
Read more2-input mini-combiner that combines a terrestrial signal with a satellite signal into a single output.?Its innovative ultra-small size allows installation virtually anywhere, including small pattress boxes.?Televes 745220
-
Read moreThe VOD 20 Streams 1TB server is a high performance, flexible, scalable and reliable device that enables the ingest of video streams to the network providing applications such as VOD, PVR and corporate content on demand. Thanks to its scalability, it allows to design a VOD distribution platform according to the characteristics of the network and the number of users. Televes 830311
-
Read moreThe VOD 95 Streams 500GB (1.2TB) SAS server is a high performance, flexible, scalable and reliable device that enables the ingest of video streams to the network providing applications such as VOD, PVR and corporate content. Thanks to its scalability, it allows to design a VOD distribution platform according to the characteristics of the network and the number of users. Televes 83031201
-
Read moreThe VOD 95 Streams?1TB (2.4TB) SAS server is a high performance, flexible, scalable and reliable device that enables the ingest of video streams to the network providing applications such as VOD, PVR and corporate content. Thanks to its scalability, it allows to design a VOD distribution platform according to the characteristics of the network and the number of users. Televes 83031201
-
Read moreF connector with threaded mounting system. Includes O-ring Micro cables: CXT-5, SK0837plus. Diameter 5mm.?Professional plastic box of 100 pcs. Televes 3808
-
Read moreAdapter that allows the connection of two female F connectors together, usually with the purpose of connecting two products equipped with F connections. The Quick F range connector does not need to be screwed on.?Professional plastic box of 50 units. Televes 3821
-
Read morePlastic adapter, which allows the transition between two unconnected coaxial cables. Bag of 25. Televes 4066
-
-
Read moreF connector with threaded mounting system. Includes O-ring Micro cables: CXT-5, SK0837plus. Diameter 5mm. Box 30 units. Televes 4127
-
-
Read moreStep box with three connectors. In the lower left part a male CEI for terrestrial TV, in the lower right a female CEI for FM (radio) and in the upper center an F connector for multimedia data. It has a signal pass so it allows a serial installation of several outlets. In addition, due to its losses it is suitable to be installed on floors 6 to 12. Televes 5249
-
Read moreThe PAU is where the union between the dispersion network and the internal network of each user is made. It allows access to a telephone line (2 copper wires), with one output in step (2 copper wires). Televes 5402
-
Read more6-way Splitter for SMATV signals, with a compact design and an efficient electrical behaviour. concieved for indoor installation, it can also be used outdoors with a case (ref. 4163).?Televes 5469
-
Read more8-way Splitter for SMATV signals, with a compact design and an efficient electrical behaviour. concieved for indoor installation, it can also be used outdoors with a case (ref. 4163).?Televes 5489
-
Read moreScrew U for clamp ? 25-45mm. Made of steel and highly resistant to corrosion, thanks to its dual treatment of galvanized and reactive sealing (RPR). Televes 4952
-
Read moreSeparator terminal connector with two CEI connectors. The one on the left is a male CEI for FM (radio) and terrestrial TV and the one on the right is a female CEI for satellite TV (FI). TV/FM-SAT. 0.6 – 1.5dB + DC without claws. Televes 5276
-
Read moreKit Sat 830 Digital with Monoblock: ISD 830 Al Offset Parabola (Ref. 793101) + LNB Monoblock (Ref. 7611) + Digital Satellite Receiver DVB-S/S2 (Ref. 717402)
-
Read moreCategory-6 and Fca Euroclass data cable, U/UTP type (Unfoiled), with copper conductor and PE sheath, white colour (RAL 9010).?Supplied in a 305m dispenser box. Televes 212201
-
Read moreCategory-6 and Eca Euroclass data cable, U/UTP type (Unfoiled), with copper conductor and LSFH sheath (Low Smoke Free of Halogen), purple colour (RAL 4008).?Supplied in a 305m dispenser box.?Televes 212310
-
Read moreCoaxial cable with live made of copper and aluminum mesh (Cu/Al), with excellent braiding coverage (79%). A 19VAtC cable, double shielding and LSFH cover. Length of 250m, gray color. Televes 212811
-
Read moreHEX-11 combined wrench, in other words, with one open-end and a ring spanner on the other end. Eases the installation task where F connectors are involved. Televes 216101
-
Read moreTool equipped with a grip and an F-type female thread to screw the F connectors on, and ease their insertion into the compression tool. Televes 216310
-
Read moreCategory-5E and Eca Euroclass data cable, U/UTP type (Unfoiled) with copper conductor and LSFH sheath (Low Smoke Free of Halogen), grey colour (RAL 7001).?Supplied in a 305m dispenser box. Televes 219602
-
Read moreCategory-5E and Fca Euroclass data cable, U/UTP type (Unfoiled), with copper conductor and PE sheath, black colour (RAL 9005). Supplied in a 305m dispenser box. Televes 219701
-
Read moreDesigned to work as a final element for optical fibre cables. Commonly used in FTTH projects, inside the buildings (usually in the secondary enclosure). Can house up to 8 splices.?Televes 231310
-
Read moreDevice enabled as a connection point to an optical fibre network. In ICT environments, when installed in the Network Termination Equipment (NTE), it works as a cut-off and test point for the optical fibre network. Incorporates pre-connection on the 4-SC/APC connector UAP.?Televes 231530
-
Read moreDevice enabled as a connection point to an optical fibre network. In ICT environments, when installed in the Network Termination Equipment (NTE), it works as a cut-off and test point for the optical fibre network. Incorporates pre-connection on the 4-SC/APC connector UAP.?Televes 231531
-
Read moreDevice enabled as a connection point to an optical fibre network. In ICT environments, when installed in the Network Termination Equipment (NTE), it works as a cut-off and test point for the optical fibre network. Incorporates pre-connection on the 4-SC/APC connector UAP.?Televes 231532
-
Read moreDevice enabled as a connection point to an optical fibre network. In ICT environments, when installed in the Network Termination Equipment (NTE), it works as a cut-off and test point for the optical fibre network. Incorporates pre-connection on the 4-SC/APC connector UAP.?Televes 231533
-
Read moreDevice enabled as a connection point to an optical fibre network. In ICT environments, when installed in the Network Termination Equipment (NTE), it works as a cut-off and test point for the optical fibre network. Incorporates pre-connection on the 4-SC/APC connector UAP.?Televes 231534
-
Read moreDevice enabled as a connection point to an optical fibre network. In ICT environments, when installed in the Network Termination Equipment (NTE), it works as a cut-off and test point for the optical fibre network. Incorporates pre-connection on the 4-SC/APC connector UAP.?Televes 231535
-
Read moreDevice enabled as a connection point to an optical fibre network. In ICT environments, when installed in the Network Termination Equipment (NTE), it works as a cut-off and test point for the optical fibre network. Incorporates pre-connection on the 4-SC/APC connector UAP.?Televes 231536
-
Read moreSingle-mode (SM) optical-fibre patch cord Pre-terminated with SC/APC connectors for the interconnection of optical equipment. 900 ?m-diameter pigtail type, its length can be reduced with the appropriate fusion tool. The sheath being LSFH, it is recommended for indoor use.?Televes 232602
-
Read moreSingle-mode (SM) optical-fibre patch cord pre-terminated with SC/APC connectors for the interconnection of optical equipment. The sheath being LSFH, it is recommended for indoor use.?
Supplied in individual bag with hanger.?Televes 232621 -
Read moreSingle-mode (SM) optical-fibre patch cord pre-terminated with SC/APC connector in one end and SC/PC at the other, to adapt different polishing in the interconnection of optical equipment. The sheath being LSFH, it is recommended for indoor use.?
Supplied in individual bag. Televes 232622 -
Read moreRigid tubes to protect a fiber optic fusion when working with a splicer. Diameter 43mm. Televes 232701. Supplied in boxes of 200 units.
-
Read moreProduces an optical signal in the 1310 nm-window modulated by the input RF SMATV signal (47 MHz- 2200 MHz). The optical output power is 6 dBm.?
Perfect for RFoG / RF Overlay solutions. Televes 233306 -
Read moreModule that amplifies the optical signal of 1550nm, generating an output power of 19dBm. Equipped with WDM, it has 1 input of 1310/1490nm with which it multiplexes the 1550nm amplified signal, offering 1 output 1310/1490/1550nm, for use in a GPON header (usually with an OLT512). Televes 234221
-
Read moreThe module amplifies the 1550 nm optical signal producing an output power of 20 dBm. Equipped with WDM, it provides 8 1310 nm/1490 nm-inputs that multiplex the amplified 1550 nm-signal, providing 8 1310 nm/1490 nm/1550 nm-outputs to be used in a GPON headend (usually OLT512).??Televes 234228
-
Read morePassive device that multiplexes/demultiplexes two optical inputs: 1610 nm (GPON), and 1550 nm (Downlink). For application in RFoG systems.?The T.0X format frame allows rack installation for optical fibre headends. Televes 234702
-
Read moreProduces an optical signal in the 1310 nm-window modulated by the input RF CATV signal (47 MHz – 1100 MHz). The optical output power is 10 dBm.?Equipped with automatic gain control (AGC).?Stable in terms of temperature, thanks to the laser temperature control circuit.?Perfect for RFoG / RF Overlay solutions. Televes 234801
? -
Read moreProduces an optical signal in the 1550 nm-window modulated by the RF input signal (47 MHz – 1100 MHz). The optical output power is 10 dBm.?Equipped with automatic gain control (AGC).?Furthermore, it is stable in terms of temperature, thanks to the laser temperature control circuit.?Perfect for RFoG solutions, and as RF Overlay transmitter on GPON networks. Televes 234811
? -
Read moreSingle-mode fiber optic hose (SM) preconnected with FC / PC connectors for connecting elements of a network, normally of the optical LNB range. Armored stainless steel tube that wraps the fiber, and protective aramid mesh (Kevlar), and a cover in LSFH resistant to ultraviolet radiation. It can be used outdoors and even underground. Televes 236110
-
Read more2dB optical attenuator in 1310/1550nm equipped with SC/APC connectors. Used to adjust the input levels to the dynamic range of devices.?Televes 236410
-
Read more5dB optical attenuator in 1310/1550nm equipped with SC/APC connectors. Used to adjust the input levels to the dynamic range of devices.?Televes 236411
