Category: Wire/Connectors
Wire/Connectors
Showing 1–60 of 69 results
-
10m optical fiber cable FC/PC F pre-ter Televes
KSh7,022.00 -
20m optical fiber cable FC/PC F pre-ter Televes
KSh11,546.00 -
Add to cartPlastic coil of 750m.?2-fibre cable with LSFH sheath for indoor installation. Each fibre has its own individual LSFH sheath and is identified with a specific colour. This provides a better organization and makes identification easier.
-
30m optical fiber cable FC/PC F pre-ter Televes
KSh17,252.00 -
40m optical fiber cable FC/PC F pre-ter Televes
KSh21,306.00 -
50m optical fiber cable FC/PC F pre-ter Televes
KSh27,238.00 -
75m optical fiber cable FC/PC F pre-ter Televes
KSh39,530.00 -
Adapter SC / APC Female-Female
KSh660.00Add to cartFiber optic distribution accessory that allows the interconnection of different fiber optic networks. It incorporates a self-locking cover as a protection and greater flexibility of use (more than 1000). High reliability Low return losses thanks to the polished APC. Easy installation thanks to the SC type connector. Effective data transmission
-
Cable 2 Fibres Indoor LSFH 300m Televes
KSh47,190.00 -
Add to cart16-fibre cable with UV-resistant LSFH sheath for indoor and outdoor installation. Divided in 4 micro-modules of 4 fibres each, each with its own LSFH sheath and different colour. This provides a better organization and makes identification easier. Coil 100 m
-
Add to cart24-fibre cable with UV-resistant LSFH sheath for indoor and outdoor installation. Divided in 6 micro-modules of 4 fibres each, each with its own LSFH sheath and different colour. This provides a better organization and makes identification easier. Coil 100 m
-
Add to cart48-fibre cable with UV-resistant LSFH sheath for indoor and outdoor installation. Divided in 6 micro-modules of 8 fibres each, each with its own LSFH sheath and different colour. This provides a better organization and makes identification easier. Coil 100 m
-
Add to cartFTTH device that captures four satellite and a terrestrial TV optical signals on a single fiber and separate them, providing in their optical outputs three satellite signals and a fourth one with satellite signal + DTT.
-
Add to cartSingle-mode (SM) optical-fibre patch cord Pre-terminated with SC/APC connectors for the connection of the elements of an optical network. Furthermore, since they are duplex, they are suitable for use in point-to-point networks that use the same window for both upstream and downstream traffic. The sheath being LSFH, it is recommended for indoor use.
-
Add to cartSingle-mode (SM) optical-fibre patch cord Pre-terminated with SC/APC connectors for the connection of the elements of an optical network. Furthermore, since they are duplex, they are suitable for use in point-to-point networks that use the same window for both upstream and downstream traffic. The sheath being LSFH, it is recommended for indoor use.
-
Add to cartSingle-mode (SM) optical-fibre patch cord Pre-terminated with SC/APC connectors for the connection of the elements of an optical network. Furthermore, since they are duplex, they are suitable for use in point-to-point networks that use the same window for both upstream and downstream traffic. The sheath being LSFH, it is recommended for indoor use.
-
Add to cartSingle-mode (SM) optical-fibre patch cord Pre-terminated with SC/APC connectors for the connection of the elements of an optical network. Furthermore, since they are duplex, they are suitable for use in point-to-point networks that use the same window for both upstream and downstream traffic. The sheath being LSFH, it is recommended for indoor use.
Highlights
Low attenuation levels and high reliability
Connectors mechanically outphased on one end to facilitate wiring
Equipped with locks and removable fixing devices: the fibres may be kept together or separate
Includes identifiers for each of the fibres
Dca-s2,d2,a1 Euroclass
Main features
ITU-T G.657A2 fibre type
Duplex patch cord: two fibre cables
LSFH sheath, orange colour
SC/APC connectors
Length 55m
Specifications
Technical specifications
Euroclass Type Dca-s2,d2,a1
Fiber Type Single Mode
Opctics connectors Type SC/APC
Cover material Type LSFH
Attenuation dB ? 0,8
Insertion losses dB < 0,5 Return losses (in each patch cord ) dB >60
Minimum radius of curvature mm 30
Outside diameter of the fiber mm 3 -
Add to cartSingle-mode (SM) optical-fibre patch cord Pre-terminated with SC/APC connectors for the connection of the elements of an optical network. Furthermore, since they are duplex, they are suitable for use in point-to-point networks that use the same window for both upstream and downstream traffic. The sheath being LSFH, it is recommended for indoor use.
Highlights
Low attenuation levels and high reliability
Connectors mechanically outphased on one end to facilitate wiring
Equipped with locks and removable fixing devices: the fibres may be kept together or separate
Includes identifiers for each of the fibres
Dca-s2,d2,a1 Euroclass
Main features
ITU-T G.657A2 fibre type
Duplex patch cord: two fibre cables
LSFH sheath, orange colour
SC/APC connectors
Length 40m
Specifications
Technical specifications
Euroclass Type Dca-s2,d2,a1
Fiber Type Single Mode
Opctics connectors Type SC/APC
Cover material Type LSFH
Attenuation dB ? 0,8
Insertion losses dB < 0,5 Return losses (in each patch cord ) dB >60
Minimum radius of curvature mm 30
Outside diameter of the fiber mm 3 -
Add to cartSingle-mode (SM) optical-fibre patch cord Pre-terminated with SC/APC connectors for the connection of the elements of an optical network. Furthermore, since they are duplex, they are suitable for use in point-to-point networks that use the same window for both upstream and downstream traffic. The sheath being LSFH, it is recommended for indoor use.
Highlights
Low attenuation levels and high reliability
Connectors mechanically outphased on one end to facilitate wiring
Equipped with locks and removable fixing devices: the fibres may be kept together or separate
Includes identifiers for each of the fibres
Dca-s2,d2,a1 Euroclass
Main features
ITU-T G.657A2 fibre type
Duplex patch cord: two fibre cables
LSFH sheath, orange colour
SC/APC connectors
Length 25m
Specifications
Technical specifications
Euroclass Type Dca-s2,d2,a1
Fiber Type Single Mode
Opctics connectors Type SC/APC
Cover material Type LSFH
Attenuation dB ? 0,8
Insertion losses dB < 0,5 Return losses (in each patch cord ) dB >60
Minimum radius of curvature mm 30
Outside diameter of the fiber mm 3 -
Add to cartSingle-mode (SM) optical-fibre patch cord Pre-terminated with SC/APC connectors for the connection of the elements of an optical network. Furthermore, since they are duplex, they are suitable for use in point-to-point networks that use the same window for both upstream and downstream traffic. The sheath being LSFH, it is recommended for indoor use.
Highlights
Low attenuation levels and high reliability
Connectors mechanically outphased on one end to facilitate wiring
Equipped with locks and removable fixing devices: the fibres may be kept together or separate
Includes identifiers for each of the fibres
Dca-s2,d2,a1 Euroclass
Main features
ITU-T G.657A2 fibre type
Duplex patch cord: two fibre cables
LSFH sheath, orange colour
SC/APC connectors
Length 15m
Specifications
Technical specifications
Euroclass Type Dca-s2,d2,a1
Fiber Type Single Mode
Opctics connectors Type SC/APC
Cover material Type LSFH
Attenuation dB ? 0,8
Insertion losses dB < 0,5 Return losses (in each patch cord ) dB >60
Minimum radius of curvature mm 30
Outside diameter of the fiber mm 3 -
Add to cartDouble adapter. Fiber optic distribution accessory that allows the interconnection of the different fiber optic networks. It incorporates a self-locking cap for protection and greater flexibility of use (more than 1000). High reliability Low return losses thanks to APC polishing. Easy installation thanks to the SC type connector. Efficient data transmission.
-
Add to cartMulti-mode (MM) optical-fiber duplex patch cord Pre-terminated with SC/PC connectors for the connection of the elements of an optical network. Furthermore, since they are duplex, they are suitable for use in point-to-point networks that use the same window for both upstream and downstream traffic. The sheath being LSFH, it is recommended for indoor use. Supplied in individual packing.
-
Add to cartAdapter that allows male optical connectors to be connected to each other, with LC mechanics, at both ends. Compatible with multimode fibers (MM), from OM1 to OM5.
-
Add to cartDuplex multimode fiber optic patch cord (MM) pre-assembled with LC/PC connectors for the interconnection of optical equipment. Also, being duplexes, they are suitable for point-to-point networks where the same window is used for upload and download traffic. The cover is LSFH and its use indoors is recommended. Supplied in individual packaging.
-
Add to cartDuplex singlemode (SM) fiber optic patch cord pre-assembled with LC/UPC connectors for connecting elements of an optical network. Also, being duplexes, they are suitable for point-to-point networks where the same window is used for upload and download traffic. The cover is LSFH and its use indoors is recommended. Supplied in individual packaging.
-
Add to cartAdapter that allows male optical connectors to be connected to each other, with LC mechanics, at both ends. It is compatible for both PC and UPC polishes, but it is recommended to use the same type of polishes in both connections to avoid light loss. Compatible with single mode fibers (SM).
-
Add to cartFTTH device that captures four satellite and a terrestrial TV optical signals on a single fiber and separate them, providing in their optical outputs three satellite signals and a fourth one with satellite signal + DTT.
-
Add to cartSingle-mode (SM) optical-fibre patch cord pre-terminated with SC/APC connector in one end and SC/PC at the other, to adapt different polishing in the interconnection of optical equipment. The sheath being LSFH, it is recommended for indoor use.?
Supplied in individual bag. Televes 232622 -
Add to cartSingle-mode (SM) optical-fibre patch cord pre-terminated with SC/APC connectors for the interconnection of optical equipment. The sheath being LSFH, it is recommended for indoor use.?
Supplied in individual bag with hanger.?Televes 232623 -
Add to cartSingle-mode (SM) optical fibre patch cord, Pre-terminated on one end with an SC/APC connector and with an FC/UPC connector on the other; it can thus be used as an adapter for devices with different connectorization. The sheath being LSFH, it is recommended for indoor use.
-
Add to cartSingle-mode (SM) optical-fibre patch cord pre-terminated with SC/APC connectors for the interconnection of optical equipment. The sheath being LSFH, it is recommended for indoor use.?
Supplied in individual bag with hanger.?Televes 232621 -
Add to cartSingle-mode fiber optic hose (SM) preconnected with FC / PC connectors for connecting elements of a network, normally of the optical LNB range. Armored stainless steel tube that wraps the fiber, and protective aramid mesh (Kevlar), and a cover in LSFH resistant to ultraviolet radiation. It can be used outdoors and even underground. Televes 236110
-
Add to cartSinglemode (SM) fiber optic patch cord pre-terminated with SC/APC connectors for the interconnection of optical equipment. The cover is LSFH and its use indoors is recommended.
Supplied in individual bag with hanger. -
Add to cartSingle-mode (SM) optical-fibre patch cord Pre-terminated with SC/APC connectors for the connection of the elements of an optical network. They are suitable for use in point-to-point networks that use the same window for both upstream and downstream traffic. The sheath being LSFH, it is recommended for indoor use.
-
Add to cartSingle-mode (SM) optical-fibre patch cord Pre-terminated with SC/APC connectors for the connection of the elements of an optical network. They are suitable for use in point-to-point networks that use the same window for both upstream and downstream traffic. The sheath being LSFH, it is recommended for indoor use.
-
Add to cartSingle-mode (SM) optical-fibre patch cord Pre-terminated with SC/APC connectors for the connection of the elements of an optical network. They are suitable for use in point-to-point networks that use the same window for both upstream and downstream traffic. The sheath being LSFH, it is recommended for indoor use.
-
Add to cartPre-connectorized single-mode (SM) fiber optic patch cord with LC/UPC connector at one end and SC/APC at the other, so it also serves as an adapter between devices that have different connectors. The cover is LSFH and its use indoors is recommended. Supplied in individual packaging.
-
-
Add to cartF.O. Outlet Kit: Keystone Module + Adapter + Preterminated Patch Cord LSFH Dca 15m
Complete kit for the installation of a connectorized fiber optic outlet.
The keystone module allows the installation of a “SC/APC” female fiber optic adapter in an RJ45-type outlet cover. The module, together with the adapter, make up a fiber optic terminal outlet.
It also includes a preterminated single-mode fiber optic patch cord with “SC/APC” connectors at its ends, to supply the signal from the optical UAP to the socket. This patch cord is specially designed with a shorter boot at one of the ends, thus avoiding increases attenuations in the signal due to exceisve bends.
Highlights
Keystone module with standard dimensions, making it compatible with all conventional RJ45 covers
Very easy installation: the keystone module is introduced into the cover by pressing until the module tabs hook. The adapter is installed on the keystone module by the same process
Patch cord design adapted to the installation in the outlet: its shorter boot makes easier the passage of the SC/APC connector into the pipe to the outlet
Very low insertion losses
Patch cord with Euroclass Dca-s2,d2,a1
Features
“SC/APC” connectors
Keystone module built in white colour PVC plastic
Patch cord with ITU-T G657A2 single-mode fiber and LSFH outer sheath in orange colour -
Add to cartF.O. Outlet Kit: Keystone Module + Adapter + Preterminated Patch Cord LSFH Dca 10m
Complete kit for the installation of a connectorized fiber optic outlet.
The keystone module allows the installation of a “SC/APC” female fiber optic adapter in an RJ45-type outlet cover. The module, together with the adapter, make up a fiber optic terminal outlet.
It also includes a preterminated single-mode fiber optic patch cord with “SC/APC” connectors at its ends, to supply the signal from the optical UAP to the socket. This patch cord is specially designed with a shorter boot at one of the ends, thus avoiding increases attenuations in the signal due to exceisve bends.
Highlights
Keystone module with standard dimensions, making it compatible with all conventional RJ45 covers
Very easy installation: the keystone module is introduced into the cover by pressing until the module tabs hook. The adapter is installed on the keystone module by the same process
Patch cord design adapted to the installation in the outlet: its shorter boot makes easier the passage of the SC/APC connector into the pipe to the outlet
Very low insertion losses
Patch cord with Euroclass Dca-s2,d2,a1
Features
“SC/APC” connectors
Keystone module built in white colour PVC plastic
Patch cord with ITU-T G657A2 single-mode fiber and LSFH outer sheath in orange colour -
Add to cartAdapter that allows male optical connectors to be connected to each other, with SC mechanics, at both ends. Compatible with multimode fibers (MM)
-
Add to cartMultimode (MM) fiber optic patch cord pre-terminated at both ends using LC/PC connectors. It is convertible to Pigtail offering the versatility to adapt its functionality according to the requirement. It is used in a standard way for the interconnection of optical equipment.
-
Add to cartMulti-mode (MM) optical-fiber duplex patch cord Pre-terminated with SC/PC connectors for the connection of the elements of an optical network. Furthermore, since they are duplex, they are suitable for use in point-to-point networks that use the same window for both upstream and downstream traffic. The sheath being LSFH, it is recommended for indoor use. Supplied in individual packing.
-
Add to cartMulti-mode (MM) optical-fiber duplex patch cord Pre-terminated on one end with an LC/PC connector and with an SC/PC connector on the other; it can thus be used as an adapter for devices with different connectorization. Furthermore, since they are duplex, they are suitable for use in point-to-point networks that use the same window for both upstream and downstream traffic.
-
Add to cartMulti-mode (MM) optical-fiber duplex patch cord Pre-terminated with LC/PC connectors for the connection of the elements of an optical network. Furthermore, since they are duplex, they are suitable for use in point-to-point networks that use the same window for both upstream and downstream traffic. The sheath being LSFH, it is recommended for indoor use.
-
Add to cartMulti-mode (MM) optical-fiber duplex patch cord Pre-terminated on one end with an LC/PC connector and with an SC/PC connector on the other; it can thus be used as an adapter for devices with different connectorization. Furthermore, since they are duplex, they are suitable for use in point-to-point networks that use the same window for both upstream and downstream traffic.
-
Add to cart2-way splitter with SC/APC connectors for optical signals in the 1260 nm-to-1650 nm range. Specially designed to complement the Overlight series. Also recommended for applications with WideBand LNB, with optical fibre or GPON networks. The compact frame is perfect for individual installations.
-
Add to cart4-way splitter with SC/APC connectors for optical signals in the 1260 nm-to-1650 nm range. Specially designed to complement the Overlight series. Also recommended for applications with WideBand LNB, with optical fibre or GPON networks. The compact frame is perfect for individual installations.
-
Add to cart8-way splitter with SC/APC connectors for optical signals in the 1260 nm-to-1650 nm range. Specially designed to complement the Overlight series. Also recommended for applications with WideBand LNB, with optical fibre or GPON networks. Its compact chassis is suitable for maximum optimisation of the available space.
-
Add to cartPigtail Single-mode (SM) fiber optic patch cord. It has one end pre-terminated with an SC/APC connector, and the other end without connector. This allows easy fusion of the pigtail against a fiber cable. The 900?m cover is LSFH type and is recommended for indoor use.
-
Add to cartPigtail Single-mode (SM) fiber optic patch cord. It has one end pre-terminated with an LC/UPC connector, and the other end without connector. This allows easy fusion of the pigtail against a fiber cable. The 900?m cover is LSFH type and is recommended for indoor use.
-
Add to cartPigtail Multi-Mode (MM) fiber optic patch cord. It has one end pre-terminated with an SC/PC connector, and the other end without connector. This allows easy fusion of the pigtail against a fiber cable. The 900?m cover is LSFH type and is recommended for indoor use.
-
Add to cartPigtail Multi-Mode (MM) fiber optic patch cord. It has one end pre-terminated with an SC/PC connector, and the other end without connector. This allows easy fusion of the pigtail against a fiber cable. The 900?m cover is LSFH type and is recommended for indoor use.
-
Add to cartPigtail Multi-Mode (MM)) fiber optic patch cord. It has one end pre-terminated with an LC/PC connector, and the other end without connector. This allows easy fusion of the pigtail against a fiber cable. The 900?m cover is LSFH type and is recommended for indoor use.
-
Add to cartPigtail Single-mode (SM) fiber optic patch cord. It has one end pre-terminated with an LC/APC connector, and the other end without connector. This allows easy fusion of the pigtail against a fiber cable. The 900?m cover is LSFH type and is recommended for indoor use.
-
Add to cart200m plastic coil.?2-fibre cable with LSFH sheath for outdoor installation. Each fibre has its own individual LSFH sheath and is identified with a specific colour. This provides a better organization and makes identification easier.?Televes 232001
-
Add to cart500m plastic coil.?2-fibre cable with LSFH sheath for outdoor installation. Each fibre has its own individual LSFH sheath and is identified with a specific colour. This provides a better organization and makes identification easier.?Televes 232002
-
Plastic coil 500m FK4 Cable of 4 Singlemode Fibers for…
KSh170,610.00Add to cart4-fiber cable with LSFH sheath for indoor installation. Each fiber has its own individual LSFH sheath and is identified with a specific colour. This provides a better organization and makes identification easier. Provided in 500 m plastic reels.
-
Add to cartPlastic coil of 750m.?2-fibre cable with LSFH sheath for indoor installation. Each fibre has its own individual LSFH sheath and is identified with a specific colour. This provides a better organization and makes identification easier. Televes 231902
-
Add to cartSingle-mode (SM) optical-fibre patch cord Pre-terminated with SC/APC connectors for the interconnection of optical equipment. 900 ?m-diameter pigtail type, its length can be reduced with the appropriate fusion tool. The sheath being LSFH, it is recommended for indoor use.?Televes 232602
Popular Products
-
Starlink Mini Dual USB Car Charger with
DC Cable & Voltmeter - 9.84FT/3M
-
Starlink Mini Versatile 3-in-1 DC Power
Cable Replacement - 9.8FT/16.4FT/32.8FT
-
Starlink Gen2 Rectangular Satellite V2
Replacement Extension Cable - 32.8FT/75FT/150FT/300FT
-
Starlink Flat High Performance Ethernet
Adapter - SPX Plug to RJ45 Cable Extension
-
DC 9V to 28V Boost Converter with DC
Power Cable for Starlink Mini
Products
-
Starlink Mini Dual USB Car Charger with
DC Cable & Voltmeter - 9.84FT/3M
-
Starlink Mini Versatile 3-in-1 DC Power
Cable Replacement - 9.8FT/16.4FT/32.8FT
-
Starlink Gen2 Rectangular Satellite V2
Replacement Extension Cable - 32.8FT/75FT/150FT/300FT
-
Starlink Flat High Performance Ethernet
Adapter - SPX Plug to RJ45 Cable Extension
-
DC 9V to 28V Boost Converter with DC
Power Cable for Starlink Mini