Tag: Security
Security
Showing 1–160 of 458 results
-
-
Read moreHigh-power multiband amplifier with
multiple controls on the front end, which design uses components that
minimize the total noise figure. Equipped with 5 inputs
(FM-BIII-21…32-36…48-UHF). The UHF band is divided in 2 of the inputs,
which is useful in two-repeater reception installations since it allows an
appropriate filtering of the channels for each of them. LTE700 -
Read moreHigh-power multiband amplifier with
multiple controls on the front end, which design uses components that
minimize the total noise figure. Equipped with 5 inputs
(FM-BIII-21…36-38…48-UHF). The UHF band is divided in 2 of the inputs,
which is useful in two-repeater reception installations since it allows an
appropriate filtering of the channels for each of them. LTE700 -
Read moreHigh-power multiband amplifier with
multiple controls on the front end, which design uses components that
minimize the total noise figure. Equipped with 3 inputs (FM-BIII-UHF).
Equipped with LTE700 Ready filtering. RED compliant -
Read moreTeleves’ range of amplifiers dedicated to
CATV (available with F connector) operates at frequencies 5-65MHz for CR and
88-1006Mhz for the rest of the outputs. Passive Return + Equalizer. Housing
1i/1o “F”: 5..65/88..1006MHz G -1/35dB Vs 116dBμV -
Read moreTeleves’ range of amplifiers dedicated to
CATV (available with F connector) operates at frequencies 5-65MHz for CR and
88-1006Mhz for the rest of the outputs. Passive Return + Equalizer. Housing
1i/1o “F”: 5..65/88..1006MHz G -1/25dB Vs 116dBμV -
Read moreTeleves’ range of amplifiers dedicated to
CATV (available with F connector) operates at frequencies 5-65MHz for CR and
88-1006Mhz for the rest of the outputs. Passive Return. 1i/(2o + TV)
“F”: 5..65/88..1006MHz G -7/21dB Vs 111dBμV. Output TV socket G
14dB -
Read moreDomestic amplifier with 6 outputs, to
extend the terrestrial television domestic network. Equipped with LTE700
4G/5G filtering. -
Read moreGround surface mount plate using pikes,
no need for concrete. Used for bolting on it a pivoting base from 450XL or
550 range (ref. 313412 and 3142xx). The hot-dip galvanizing surface treatment
provides enhanced durability in adverse corrosion conditions. Grey
finish. -
Read moreUpper section of 3m Hot-Dip galvanizing +
Painting, for the erection of a 180 series tower. Anchoring system with union
nuts. Easy and quick mounting. Fully automated soldering. 180 tower maximum
height: 26.5m (as per calculation conditions). Colour White. -
Read more3m Middle Section, Hot-Dip Galvanizing +
Painting, for the formation of a 180 series tower. Anchoring system with
union nuts. Easy and quick mounting. Fully automated soldering. 180 tower
maximum height: 26.5m (as per calculation conditions). White color. -
Read moreUpper section, Zinc + Paint for the
formation of a 180 series tower. The section is painted in white. Anchoring
system with union nuts. Easy and quick mounting. Fully automated soldering.
180 tower maximum height: 26.5m (as per calculation conditions). (Ømax mast
46mm). White color -
Read more3m Middle section, Zinc + Paint for the
formation of a 180 series tower. The section is painted in white. Anchoring
system with union nuts. Easy and quick mounting. Fully automated soldering.
180 tower maximum height: 26.5m (as per calculation conditions). White
colour. -
Read moreMIRA BOSS is an indoor DTT antenna with
exceptional reception, thanks to its optimized UHF capture system. The
antenna disk allows slight orientation to adjust reception and improve signal
quality. -
Read moreCompact amplifier equipped with 17 inputs
(one terrestrial and the four polarities of four satellites) that allows
increasing the number of users in the installation while optimizing the
signal received by each of them. Around 27 dB and 31 dB amplification in
terrestrial and satellite respectively. -
Read moreCompact multiswitch equipped with 17
inputs (one terrestrial and 16 for four satellites, each with its four
polarities) and 32 user outputs. -
Read moreCompact multiswitch equipped with 17
inputs (one terrestrial and 16 for four satellites, each with its four
polarities) and 24 user outputs. -
Read moreCompact multiswitch equipped with 17
inputs (one terrestrial and 16 for four satellites, each with its four
polarities) and 16 user outputs. -
Read moreCompact multiswitch equipped with 17
inputs (one terrestrial and 16 for four satellites, each with its four
polarities) and 8 user outputs. -
Read moreF connector with threaded mounting
system. Supplied in a professional plastic box of 50 units. -
Read moreThe Optical Network Terminal (ONT) is a
customer premises equipment (CPE) in charge of delivering the services at the
subscriber’s home. The Home type provides 4 GbE Ethernet ports, 2 FXS ports,
1 USB port, Wi-Fi WLAN 802.11 b/g/n/ac, 2.4 / 5 GHz), and RF Overlay. -
Read moreThe Optical Network Terminal (ONT) is a
customer premises equipment (CPE) in charge of delivering the services at the
subscriber’s room. The Room type provides 4 GbE Ethernet/PoE ports, 2 FXS
ports, 2 USB ports and RF Overlay. -
Read moreMonitoring Software. Software tool and
its configuration for the GPON infraestructures monitoring. It provides
visibility in detail about devices and users in the network. -
Read moreServer + Monitoring Software. Software
tool and its configuration for the GPON infraestructures monitoring. It
provides visibility in detail about devices and users in the network. -
Read moreConfiguration service + Router Device.
GPON Infraestructures. Latest generation router and configuration service
adapted to each network infraestructure on demand. -
Read moreH30Evolution is a field strength meter
Full model: DVB-S/S2 + DVB-T/T2 + DVB-C + WiFi and IPTV Analysers + HEVC
display + Coaxial Cable Lead + Carrying Case that combines the best features
of a portable and compact equipment – distinctive of the H30 series – with
revolutionary functionalities. Thanks to the innovative multiscreen system
based on Wi-Fi/Bluetooth -
Read moreH30Evolution is a field strength
meter DVB-S/S2 + DVB-T/T2 + DVB-C that combines the best features of a
portable and compact equipment – distinctive of the H30 series – with
revolutionary functionalities. Thanks to the innovative multiscreen system based
on Wi-Fi/Bluetooth,the meter may be remotely displayed and controlled using
any Android or iOS device or a PC -
Read moreH30Evolution is a field strength meter
DVB-S/S2 + DVB-C that combines the best features of a portable and compact
equipment – distinctive of the H30 series – with revolutionary
functionalities. Thanks to the innovative multiscreen system based on Wi-Fi/Bluetooth,the
meter may be remotely displayed and controlled using any Android or iOS
device or a PC -
Read moreH30Evolution is a field strength meter
DVB-S/S2 + DVB-T/T2 that combines the best features of a portable and compact
equipment – distinctive of the H30 series – with revolutionary
functionalities. Thanks to the innovative multiscreen system based on Wi-Fi/Bluetooth,the
meter may be remotely displayed and controlled using any Android or iOS
device or a PC -
Read moreH30Evolution is a field strength meter
DVB-S/S2 + DVB-T that combines the best features of a portable and compact
equipment – distinctive of the H30 series – with revolutionary
functionalities. Thanks to the innovative multiscreen system based on Wi-Fi/Bluetooth,the
meter may be remotely displayed and controlled using any Android or iOS
device or a PC -
Read moreCarrying Case and Coaxial Cable Lead
included. Light and robust equipment with a complete range of tools to ensure
the quality of a TV installation with signals in both the satellite
(DVB-S/S2) and terrestrial (DVB-T/T2 or DVB-C). It allows to update the
options of the meter through software under license. Televes 593314 -
Read moreCarrying Case and Coaxial Cable Lead
included. Light and robust equipment with a complete range of tools to ensure
the quality of a TV installation with signals in both the satellite
(DVB-S/S2) and terrestrial (DVB-T/T2 or DVB-C). It allows to update the
options of the meter through software under license. Televes 593312 -
Read moreCarrying Case and Coaxial Cable Lead
included. Light and robust equipment with a complete range of tools to ensure
the quality of a TV installation with signals in both the satellite
(DVB-S/S2) and terrestrial (DVB-T/T2 or DVB-C). It allows to update the
options of the meter through software under license. Televes 593311 -
Read moreCarrying Case and Coaxial Cable Lead
included. Light and robust equipment with a complete range of tools to ensure
the quality of a TV installation with signals in both the satellite
(DVB-S/S2) and terrestrial (DVB-T/T2 or DVB-C). It allows to update the
options of the meter through software under license. Televes 593313 -
Read moreDevice that converts alternating current
into direct current to feed H30/H30FLEX meters. Several plugs are included
for its use in any electrical installation. -
Streamer with remultiplexing DVBS/S2 – IP, with CI Re-encryption Pro: Idiom for DRM solution Televes
Read moreStreamer that generates an encapsulated
IP output, from the multiplexing of available services in up to 3 different
SAT TV transponders. These can be extracted from 2 different satellites (2
independent SAT-FI inputs), or from a single satellite through the input loop
itself at the headend. -
-
-
-
-
-
-
-
-
-
-
-
-
-
-
Read moreWooden coil 500m Burial coaxial cable
1/2″ 7RtC UV Resident Dca Class A Ø 2.7/11.5/15.0mm Gray Televes -
-
-
-
Read moreWooden coil 250m Coaxial Cable TR-165
LSFH UV Resistant Dca Class A 11RtC Ø 1.63/7.2/10.1mm Gray Televes -
Read morePlastic coil 250m Coaxial Cable T-100plus
LSFH Dca Class A 16RtC Ø 1,13/4,8/6,6mm White Televes -
Read morePlastic coil 100m Coaxial Cable T-100plus
LSFH Dca Class A 16RtC Ø 1,13/4,8/6,6mm White Televes -
Read moreCardboard spool 100m Coaxial Cable
T-100plus LSFH Dca Class A 16RtC Ø 1,13/4,8/6,6mm Black Televes -
-
-
-
-
-
Read moreStrip of 8
Schuko-type 16A sockets, to provide power supply to equipment installed in
19″ rack racks. It occupies 1U of height and incorporates a light switch
with protection cover. -
Read more8RU high chassis for wall or perforated
plate mounting. It has been designed to house panels and boards, mainly for
the organization of connectors. -
Read moreSingle-mode (SM) optical fibre patch
cord, Pre-terminated on one end with an SC/APC connector and with an FC/UPC
connector on the other; it can thus be used as an adapter for devices with
different connectorization. The sheath being LSFH, it is recommended for
indoor use. Supplied in 8m reel. -
Read moreNylon cable tie that allows the fastening
and organization of any type of cable. Its velcro-type system provides a firm
and secure fastening by adhering one surface of the flange to the other, and
allowing its reuse as many times as necessary thanks to its simple
separation. 5 units. -
Read moreSingle-mode (SM) optical fibre patch
cord, Pre-terminated on one end with an SC/APC connector and with an FC/UPC
connector on the other; it can thus be used as an adapter for devices with
different connectorization. The sheath being LSFH, it is recommended for
indoor use. -
Read moreSingle-mode (SM) optical-fibre patch cord
Pre-terminated with SC/APC connectors for the connection of the elements of
an optical network. Furthermore, since they are duplex, they are suitable for
use in point-to-point networks that use the same window for both upstream and
downstream traffic. The sheath being LSFH, it is recommended for indoor use. -
Read moreSingle-mode (SM) optical-fibre patch cord
Pre-terminated with SC/APC connectors for the connection of the elements of
an optical network. Furthermore, since they are duplex, they are suitable for
use in point-to-point networks that use the same window for both upstream and
downstream traffic. The sheath being LSFH, it is recommended for indoor use. -
Read moreSingle-mode (SM) optical-fibre patch cord
Pre-terminated with SC/APC connectors for the connection of the elements of
an optical network. Furthermore, since they are duplex, they are suitable for
use in point-to-point networks that use the same window for both upstream and
downstream traffic. The sheath being LSFH, it is recommended for indoor use. -
Read moreSingle-mode (SM) optical-fibre patch cord
Pre-terminated with SC/APC connectors for the connection of the elements of
an optical network. Furthermore, since they are duplex, they are suitable for
use in point-to-point networks that use the same window for both upstream and
downstream traffic. The sheath being LSFH, it is recommended for indoor use. -
Read moreSingle-mode (SM) optical-fibre patch cord
Pre-terminated with SC/APC connectors for the connection of the elements of
an optical network. They are suitable for use in point-to-point networks that
use the same window for both upstream and downstream traffic. The sheath
being LSFH, it is recommended for indoor use. -
Read moreSingle-mode (SM) optical-fibre patch cord
Pre-terminated with SC/APC connectors for the connection of the elements of
an optical network. They are suitable for use in point-to-point networks that
use the same window for both upstream and downstream traffic. The sheath
being LSFH, it is recommended for indoor use. -
Read moreSingle-mode (SM) optical-fibre patch cord
Pre-terminated with SC/APC connectors for the connection of the elements of
an optical network. They are suitable for use in point-to-point networks that
use the same window for both upstream and downstream traffic. The sheath
being LSFH, it is recommended for indoor use. -
Read moreSingle-mode (SM) optical-fibre patch cord
Pre-terminated with SC/APC connectors for the connection of the elements of
an optical network. They are suitable for use in point-to-point networks that
use the same window for both upstream and downstream traffic. The sheath
being LSFH, it is recommended for indoor use. -
-
-
Read moreModular element that allows the
installation of a “SC/APC” female fiber optic adapter in an
RJ45-type outlet cover, jointly forming a fiber optic terminal outlet. -
Read moreModular element that allows the
installation of a “SC/APC” female fiber optic adapter in an
RJ45-type outlet cover. -
Read moreMulti-input
multiband amplifier, perfect for terrestrial individual or MDU (Multi
Dwelling Unit) installations, that allows programming up to 32 digital
filters on 4 VHF+UHF inputs (DTT). It is equipped with 6 inputs, allowing its
configuration between 2 distribution modes: FM-4xVHF/UHF-SAT or
FM-DAB-3xUHF-SAT. Equipped with 2 outputs: one terrestrial and one
terrestrial+satellite. -
Read moreMulti-input multiband amplifier, perfect
for terrestrial individual or MDU (Multi Dwelling Unit) installations, that
allows programming up to 32 digital filters on 4 VHF+UHF inputs
(DTT). It is equipped with 5 inputs, allowing its configuration between
2 distribution modes: FM-4xVHF/UHF or FM-DAB-3xUHF, and can achieve
programmable amplification and balancing of the different RF inputs. -
Read moreMulti-input multiband amplifier, perfect
for terrestrial individual or MDU (Multi Dwelling Unit) installations, that
allows programming up to 32 digital filters on 4 VHF+UHF inputs
(DTT).It is equipped with 6 inputs, allowing its configuration between 2
distribution modes: FM-4xVHF/UHF-SAT or FM-DAB-3xUHF-SAT. Equipped with 2
outputs: one terrestrial and one terrestrial+satellite. -
Read moreRJ45 FTP Cat 6A male connector, reusable
and easy to connect as it does not require a specific tool. The connector
itself incorporates 2 pieces that hook together, providing the necessary
support for the cable. Includes blue plastic protector. They are supplied in
boxes of 25 units. -
Read morePre-terminated Ethernet network cable
0.3m long, with an RJ45 connector at each end. Made with a Cat 6 data cable
and type U/UTP, with an internal copper conductor and LSFH (Low Smoke Free of
Halogen) sheath in violet. Supplied in individual bag. -
Read morePreconnected data patch cord with RJ45
connector at each end. It is made of a Category-6A data cable, S/FTP type
(foiled pairs and foiled cable), with a flexible copper inner conductor 26
AWG and outer sheath made of grey LSFH (Low Smoke Free of Halogen).
5m. Box 10 units -
Read morePreconnected data patch cord with RJ45
connector at each end. It is made of a Category-6A data cable, S/FTP type
(foiled pairs and foiled cable), with a flexible copper inner conductor 26
AWG and outer sheath made of grey LSFH (Low Smoke Free of Halogen).
3m. Box 10 units -
Read morePreconnected data patch cord with RJ45
connector at each end. It is made of a Category-6A data cable, S/FTP type
(foiled pairs and foiled cable), with a flexible copper inner conductor 26
AWG and outer sheath made of grey LSFH (Low Smoke Free of Halogen).
2m. Box 10 units -
Read morePreconnected data patch cord with RJ45
connector at each end. It is made of a Category-6A data cable, S/FTP type
(foiled pairs and foiled cable), with a flexible copper inner conductor 26
AWG and outer sheath made of grey LSFH (Low Smoke Free of Halogen).
1m. Box 10 Units -
Read moreDevice used for the remote control and
monitoring of a T.0X Televes headend. The IP-network access methods are
implemented using an Ethernet 10/100 Mbps interface, or a 3G internal modem
for ref.555911. These devices establish a connection with a Link server
located in the Televes premises, which provides direct connection between
installer and headend. -
Read more24V (130mA) home power supply, which
sends power through the input coaxial cable, allowing the TV signal to pass
through. It is sandwiched in the installation to power mast amplifiers or a
BOSS system. In addition, it incorporates a distributor to generate two
outputs. It also serves to feed MRD from antennas. Blister -
Read moreBlister. Mast clamp Ø 25 … 45mm. Zinc +
RPR. Shackle composed of a “U” screw and clamp, which can be
installed on a mechanical part to fix a mast. Made of steel and highly
resistant to corrosion, thanks to its dual galvanized treatment and reactive
sealing (RPR). -
Read moreSet of connectors PRO EasyF
“CEI” 9.5mm male + female Angled Shielded Class A + (individual
bag) with PRO EasyF mounting system that allows to fix the cable by
tightening a single screw. In addition, this system makes it compatible with
a wide range of coaxial cable diameters (Ø5 … 7.5mm). -
Read moreCEI professional male connector with PRO
EasyF mounting system that allows to fix the cable by tightening a single
screw. In addition, this system makes it compatible with a wide range of
coaxial cable diameters (Ø5 … 7.5mm),
It offers a very high shielding thanks to its Zamak construction and an
extra metallic foil (class A +). (individual bag) -
Read moreCEI professional female connector with
PRO EasyF mounting system that allows fixing the cable by tightening a single
screw. In addition, this system makes it compatible with a wide range of
coaxial cable diameters (Ø5 … 7.5mm),
It offers a very high shielding thanks to its Zamak construction and an
extra metallic foil (class A +). (Individual bag) -
Read moreUnderground mount plate using flat bars,
no need for concrete. 1x1m. Used for embedding on it a pivoting base
from 450 XL range (ref. 313412). -
Read moreThe module amplifies the 1550 nm optical
signal producing an optical output power of 20 dBm. Based on EDFA (erbium
doped fibre) technology, it provides a high gain and a low noise factor. -
Read moreDouble adapter. Fiber optic distribution
accessory that allows the interconnection of the different fiber optic
networks. It incorporates a self-locking cap for protection and greater
flexibility of use (more than 1000). High reliability Low return losses
thanks to APC polishing. Easy installation thanks to the SC type connector.
Efficient data transmission. -
Read more48-fibre cable with UV-resistant LSFH
sheath for indoor and outdoor installation. Divided in 6 micro-modules of 8
fibres each, each with its own LSFH sheath and different colour. This
provides a better organization and makes identification easier. Coil 100 m -
Read more24-fibre cable with UV-resistant LSFH
sheath for indoor and outdoor installation. Divided in 6 micro-modules of 4
fibres each, each with its own LSFH sheath and different colour. This
provides a better organization and makes identification easier. Coil 100 m -
Read more16-fibre cable with UV-resistant LSFH
sheath for indoor and outdoor installation. Divided in 4 micro-modules of 4
fibres each, each with its own LSFH sheath and different colour. This
provides a better organization and makes identification easier. Coil 100 m -
Read moreHigh gain mast amplifier (LTE700, 2nd
Digital Dividend). 4 inputs: FM-BIII/DAB-UHF-UHF. Mast-mounted amplifier to
amplify terrestrial television signals from various antennas. It consists of
4 inputs with amplification in all bands. The amplifier is powered at 24Vdc
through the output coaxial cable. -
Read moreHigh gain mast amplifier (LTE700, 2nd
Digital Dividend). 3 inputs: FM-BIII/DAB-UHF. Mast-mounted amplifier to
amplify terrestrial television signals from various antennas. It consists of
3 inputs with amplification in all bands. The amplifier is powered at 24Vdc
through the output coaxial cable. -
Read moreHigh gain mast amplifier (LTE700, 2nd
Digital Dividend). 1 input: FM/BIII/DAB/UHF. Mast-mounted amplifier to
amplify terrestrial television signals from an antenna. It consists of a
single input with amplification in several bands. The amplifier is powered at
24Vdc through the output coaxial cable. -
Read moreDevice that allows the management of
WaveData access point networks in a simple and versatile way. Thanks to its
powerful Dual Core CPU, it allows the execution of monitoring and management
tasks quickly and efficiently. WaveBox incorporates the following
applications: AdminService: for configuration of the device itself. WaveProv
– to provision WaveData devices. -
Read moreTrusted Wi-Fi option for the busiest
environments. Managed dual band Wi-Fi Access Point that provides a
high-performance wireless mobility solution for deployments with medium/high
density. -
Read moreTrusted Wi-Fi option for the busiest
environments. Managed dual band Wi-Fi Access Point that provides a
high-performance wireless mobility solution for deployments with medium/high
density. -
Read morePassive receiver that captures an optical
signal on a single fiber (1310/1490/1550nm), and demultiplexes it (WDM). The
TV signal (1550nm) is converted to an RF output (54-2400MHz), while the
1310/1490nm wavelengths are destined to data signals (GPON) to distribute
them through its optical port. -
Read moreThis Hotspot Gateway manages the Internet
access, usually via Wi-Fi, of any type of business that needs to control the
access to Internet through their network. It features 4 GbE ports. -
Read moreThis Router allows the management of the
network, routing and firewalling secure access. The intuitive user interface
simplifies the configuration and the system administration. It features 6 GbE
ports, 2 SFP ports and a 3.4GHz Dual Core CPU and 4GB RAM. -
Read moreThis Router allows the management of the
network, routing and firewalling secure access. The intuitive user interface
simplifies the configuration and the system administration. It features 4 GbE
ports and a 1.99GHz Quad Core CPU and 2GB RAM. -
Read moreThe DSX-602PRO is an indispensable
certification tool for the analysis of twisted pair networks. Ranging from
Cat 3 / Class C to Cat 6A / Class E, it offers speed and reliability to make
your work more efficient and productive. -
Read moreThe DSX-602 is an indispensable
certification tool for the analysis of twisted pair networks. Ranging from
Cat 3 / Class C to Cat 6A / Class E, it offers speed and reliability to make
your work more efficient and productive. No other tester will offer you as
much consistency as the DSX-602. -
Read moreH30Evolution is a field strength meter
DVB-S/S2 + DVB-T/T2 + DVB-C (Carrying Case and Coaxial Cable Lead included)
that combines the best features of a portable and compact equipment –
distinctive of the H30 series – with revolutionary functionalities. Thanks to
the innovative multiscreen system based on Wi-Fi/Bluetooth. -
Read moreH30Evolution is a field strength meter
DVB-S/S2 + DVB-C (Carrying Case and Coaxial Cable Lead included) that
combines the best features of a portable and compact equipment – distinctive
of the H30 series – with revolutionary functionalities. Thanks to the
innovative multiscreen system based on Wi-Fi/Bluetooth. -
Read moreH30Evolution is a field strength meter
DVB-S/S2 + DVB-T/T2 (Carrying Case and Coaxial Cable Lead included) that
combines the best features of a portable and compact equipment – distinctive
of the H30 series – with revolutionary functionalities. Thanks to the
innovative multiscreen system based on Wi-Fi/Bluetooth. -
Read moreH30Evolution is a field strength meter
DVB-S/S2 + DVB-T (Carrying Case and Coaxial Cable Lead included) that
combines the best features of a portable and compact equipment – distinctive
of the H30 series – with revolutionary functionalities. Thanks to the
innovative multiscreen system based on Wi-Fi/Bluetooth. -
Read moreHDMI+IR DigiDom. Wireless Transmission
5GHz. The system consists of a transmitter and a receiver that allows for the
transport of an A/V signal (Usually TV, DVD, etc.) from the room where the
source is to a second screen somewhere else. The integration of infrared (IR)
transmission also allows for the remote control of the source from the second
room. -
Read moreEncoder/HD Modulator – DVB-T. It converts
HD signals into DTT channels, with HDMI pass-through. Device that losslessly
transforms a digital video and audio signal (HDMI) into a modulated FullHD
signal (MPEG-4/H.264) in a DVB-T channel. This digital signal comes from an
external SD/HD source: satellite receiver, DVR/NVR, DVD, CCTV, etc. -
Read moreRJ45 female connector assembly tool
specifically designed to reduce work times, especially when it is undertaken
an installation with high number of connectors. The tool allows to automate
the process of inserting the different pairs and the cutting of the residual
cable section, thus giving a high quality finished connection. -
Read moreRJ45 UTP Cat 6 male + Grey PVC Protective
Sleeve. connector to connect data cables. Multiple-connection guaranteed
without losses. Compatible with Cat 6 or below. Mounting requires a crimping
plier. Gold-plated pins. Supplied in 25-unit professional plastic box. -
Read moreRJ45 UTP Cat 6 male + White PVC
Protective Sleeve. connector to connect data cables. Multiple-connection
guaranteed without losses. Compatible with Cat 6 or below. Mounting requires
a crimping plier. Gold-plated pins. Supplied in 25-unit professional
plastic box. -
Read moreRJ45 FTP Cat 6 male connector to connect
data cables. Multiple-connection guaranteed without losses. Compatible with
Cat 6 or below. Mounting requires a crimping plier. Gold-plated pins.
Supplied in 50-unit professional plastic box. -
Read moreRJ45 FTP Cat 6 female connector, reusable
and easy to connect since no specific tools are required. Self-crimpable
connector (no specific tool required). Reusable: can be removed and
reinstalled without deteriorating or losing functionality. Multiple-connection
guaranteed without losses. Supplied in 10-unit professional plastic box. -
Read moreRJ45 FTP Cat 6A female connector,
reusable and easy to connect since no specific tools are required.
Self-crimpable connector (no specific tool required). Reusable: can be
removed and reinstalled without deteriorating or losing functionality.
Multiple-connection guaranteed without losses. Supplied in 10-unit
professional plastic box. -
Read moreRJ45 UTP Cat 6A female connector,
reusable and easy to connect. The connector allows self-crimping by rotating
the wing-nut built into the rear part. Supplied in 10-unit professional
plastic box. -
Read more10-unit box. Preconnected data patch
cord with RJ45 connector at each end. It is made of a Category-6 data cable,
U/UTP type, with a flexible copper inner conductor 24 AWG and outer sheath
made of white PVC. 5m -
Read more10-unit box. Preconnected data patch
cord with RJ45 connector at each end. It is made of a Category-6 data cable,
U/UTP type, with a flexible copper inner conductor 24 AWG and outer sheath
made of white PVC. 3m -
Read more10-unit box. Preconnected data patch
cord with RJ45 connector at each end. It is made of a Category-6 data cable,
U/UTP type, with a flexible copper inner conductor 24 AWG and outer sheath
made of white PVC. 2m -
Read more10-unit box. Preconnected data patch
cord with RJ45 connector at each end. It is made of a Category-6 data cable,
U/UTP type, with a flexible copper inner conductor 24 AWG and outer sheath
made of white PVC. 1m -
Read moreHome amplifier with 2 outputs with
automatic gain regulation, to expand the domestic terrestrial television
network. It incorporates LTE700/5G filtering and input power for
preamplifiers or a BOSS system. -
Read moreHome amplifier with 1 output with
automatic gain regulation, to extend the domestic terrestrial television
network. It incorporates LTE700/5G filtering and input power for
preamplifiers or a BOSS system. -
Read moreHome amplifier with 3 outputs (2+TV), to
expand the home television network. It amplifies the terrestrial and
satellite band, with passage of the passive return channel. The TV output
offers a lower gain to be connected directly to the TV (without installing an
outlet). An LNB can be controlled from any output. -
Read moreDesigned for easy installation on it of
equipment that does not have a rackable structure (routers, keyboards,
PCs…). It has a series of perforations to favor the ventilation of the
devices that are on it, as well as to be able to hold these by means of
velcro tapes or flanges. -
Read moreDesigned to house SC Duplex or LC Quad
adapters, thus allowing it to become a connection point between optical
fibers (FO patch panel). Its use allows you to have a fixed fiber optic
distribution network, to which you can supply different signals by means of a
simple reconnection. -
Read moreDesigned to house SC to SC or LC to LC
adapters, thus allowing it to become a junction point between optical fibers
(FO patch panel). It can be used to easily connect segregated multifiber
hoses or multiple fiber hoses, thus allowing easy access and identification
of these. -
Read moreDesigned to occupy 1U, it contains up to
24 RJ45 Cat 6A female connectors with FTP shielding for data transmission
under the Gigabit Ethernet standard. Its use allows to have a fixed data
distribution network, to which we can replace the signal it has, with a
simple reconnection on the panel. -
Read moreDesigned to occupy 1U, it contains up to
24 female RJ45 Cat 6 UTP connectors for data transmission under the Gigabit
Ethernet standard. Its use allows to have a fixed data distribution network,
to which we can replace the signal it has, with a simple reconnection on the
panel. -
Read moreTray with 4 fans that is installed on the
ceiling of a rack cabinet to force the cooling of the structure. This creates
an air current inside the cabinet, facilitating the dissipation of heat from
the electronic components installed inside and maintaining an adequate
temperature range. -
Read moreTray with 2 fans that is installed on the
ceiling of a rack cabinet to force the cooling of the structure. This creates
an air current inside the cabinet, facilitating the dissipation of heat from
the electronic components installed inside and maintaining an adequate
temperature range. -
Read moreVentilation unit that is installed on the
roof of a rack cabinet to force the cooling of the structure. This creates an
air current inside the cabinet, facilitating the dissipation of heat from the
electronic components installed inside and maintaining a suitable temperature
range. -
Read moreRubber plug sized to fit SC Simplex and
LC Duplex holes. These covers prevent the entry of dust or other elements
into the unused connections of panels and trays, to avoid operating problems
and extend the useful life of the rack elements. -
Read moreKit made up of 4 wheels and 16 screws for
assembly in a 19″ Rack, in a way that facilitates its movement. The
wheels allow the rack to be moved easily, a very advantageous factor in large
cabinets that can reach a very high weight. In addition, thanks to the
wheels, you get more out of the work space, since it is possible to move the
rack as needed. -
Read moreIt allows you to efficiently organize the
wiring of the rack, thus improving access to it and its appearance. -
Read moreThe 42U rack is used to introduce passive
or active equipment inside, allowing it to be visible and protected under a
secure (steel) and locked structure. Compatible with fiber optic, data cable,
or coaxial cable installations, it allows the different technologies to be
grouped in the same cabinet. It is ideal for installation of headends such as
GPON. Supplied assembled. -
Read moreThe 37U rack is used to introduce passive
or active equipment inside, allowing it to be visible and protected under a
secure (steel) and locked structure. Compatible with fiber optic, data cable,
or coaxial cable installations, it allows the different technologies to be
grouped in the same cabinet. It is ideal for installation of headends such as
GPON. Supplied assembled. -
Read moreThe 32U rack is used to introduce passive
or active equipment inside, allowing it to be visible and protected under a
secure (steel) and locked structure. Compatible with fiber optic, data cable,
or coaxial cable installations, it allows the different technologies to be
grouped in the same cabinet. It is ideal for installation of headends such as
GPON. Supplied assembled. -
Read moreThe 37U rack is used to introduce passive
or active equipment inside, allowing it to be visible and protected under a
secure (steel) and locked structure. Compatible with fiber optic, data cable,
or coaxial cable installations, it allows the different technologies to be
grouped in the same cabinet. Designed for ground installation. Supplied
assembled. -
Read moreThe 32U rack is used to introduce passive
or active equipment inside, allowing it to be visible and protected under a
secure (steel) and locked structure. Compatible with fiber optic, data cable,
or coaxial cable installations, it allows the different technologies to be
grouped in the same cabinet. Designed for ground installation. Supplied
assembled. -
Read moreThe 27U rack is used to introduce passive
or active equipment inside, allowing it to be visible and protected under a
secure structure (steel) and under lock and key. Compatible with fiber optic,
data cable, or coaxial cable installations, it allows the different
technologies to be grouped in the same cabinet. Designed for ground
installation. Supplied assembled. -
Read moreThe 22U rack is used to introduce passive
or active equipment inside, allowing it to be visible and protected under a
secure (steel) and locked structure. Compatible with fiber optic, data cable,
or coaxial cable installations, it allows the different technologies to be
grouped in the same cabinet. Designed for ground installation. Supplied
assembled. -
Read moreThe 18U rack is used to introduce passive
or active equipment inside, allowing it to be visible and protected under a
secure structure (steel) and under lock and key. Compatible with fiber optic,
data cable, or coaxial cable installations, it allows the different
technologies to be grouped in the same cabinet. Designed for ground
installation. Supplied assembled. -
Read moreModular amplifier that allows independent
adjustment of the signal received in the DAB or FM band. Both signals are
mixed in Z at their output, for compatibility with the rest of the modules in
the range. Its format is ideal for mounting in headends, with more amplifiers
of the T12 series. -
Read moreIntermediate section of 3 m for the
formation of a tower of the 550 XL series. The reinforced sections provide
greater robustness as they are built with a tube of greater diameter and
thickness, so more complicated scenarios can be solved. -
Read moreIntermediate section of 3 m for the
formation of a tower of the 550 XL series. The reinforced sections provide
greater robustness as they are built with a tube of greater diameter and
thickness, so more complicated scenarios can be solved. -
Read moreLower section of 3 m for the formation of
a tower of the 550 XL series. The section is painted in red (RAL 3020). Being
a tilting section, it requires the installation of guy wires. -
Read moreUpper section of 3 m for the formation of
a tower of the 550 XL series. The section is painted in red (RAL 3020). -
Read moreOptimized electronic and optical
engineering, at the service of TV. This Wideband and terrestrial satellite
optical receiver is responsible for capturing an optical TV signal
(1100…1650nm), processing it and recovering the original terrestrial and
satellite TV signals, offering 4 outputs in Quattro mode: each connector
provides a of the four TVSAT combinations of polarity and band. -
Read moreFiber optic terminal socket designed to
act as a cut and test point in a communications network (ICT2), incorporates
a Keystone module and a female “SC/APC” Simplex FO adapter with
internal shutter. -
Read moreAdapter that allows male optical
connectors to be connected to each other, with LC mechanics, at both ends.
Compatible with multimode fibers (MM), from OM1 to OM5.
