Welcome to Adishnetservices Market Place.
24/7/365 Support +254720548999

Cart

Your Cart is Empty

Back To Shop

Cart

Your Cart is Empty

Back To Shop
24/7/365 Support +254720548999

Low gain mast amplifier (LTE700) 3 inputs: BIII/DAB-UHF-UHF Televes   Kenya

Share On:

Mast installation amplifier to amplify
terrestrial television signals from various antennas. It has 3 inputs with
amplification in all bands. The amplifier is powered at 12Vdc through the
output coaxial cable. NETWORK compliant.

Low Gain Mast Amplifier

3 inputs: BIII/DAB-UHF-UHF

Mast installation amplifier to amplify terrestrial television signals from
various antennas.

It has 3 inputs with amplification in all bands. The amplifier is powered
at 12Vdc through the output coaxial cable.

NETWORK compliant.

Highlights
Separate amplification of each band
EasyF connection system
Fully automated manufacturing and subjected to rigorous quality
controls
High armored chassis, made of Zamak
Characteristic
LTE/5G filter to eliminate telephony interference
ON/OFF switches to allow DC to pass through the UHF inputs, to power a BOSS
system
simple assembly. Flange for fixing to the mast included
Orange casing made of resistant orange ABS plastic for outdoor
installation
EasyF connection system: simplicity and savings
The EasyF is an innovative connection concept for the internal conductor of
the coaxial cable (live), which is inserted directly into the device,
increasing the reliability of the connection. In addition, thanks to the
absence of “F” connectors, it is possible to reduce the chassis and
secure the connection of two cables with a single screw.

Real saving of time: speeding up the installation is possible, since it is
not necessary to carry out the connectorization of the coaxial cables. In
addition, the process of screwing the connectors into the device is avoided,
which is sometimes complicated when space is not enough.
Connection reliability: the tie that holds the cables prevents the coax
from coming loose
Economic savings: no additional connector (neither “F” nor
“CEI”) is needed
Space optimization: inputs and outputs are always located on the same side
of the device, avoiding bending coaxial cables and facilitating work inside
cabinets and registers
Very easy assembly in three steps: it is only necessary to screw and
unscrew the covers to connect two cables:
1. Unscrew the cover of the device to access the connection

2. Insert the previously stripped coaxial cables

3. Close the lid and screw to secure the connection

Find out more about the reliability of the EasyF system
With EasyF, the connection of the coaxial cable to the device is carried
out by means of an automated system of insertion of the live (internal
conductor) by contact, without requiring soldering.

Like the first day: the lifetime of the device increases by eliminating the
possible deterioration of the welds over time
Reduction of the rate of failures: generally produced by cold welds
Optimization of electromagnetic behavior: at high frequencies
Reinforcement of our commitment to the environment: pollution caused by the
welding process is eliminated and electricity consumption in production is
reduced
Application example

image

https://adishnetservices.com/wp-content/uploads/2023/11/low-gain-mast-amplifier-lte700-3-inputs-biiidab-uhf-uhf-televes-300×300.jpg?wpId=81217

Manufacturer

TELEVES

Chat with us

Share On:

Cart

Your Cart is Empty

Back To Shop