Welcome to Adishnetservices Market Place.
24/7/365 Support +254720548999

Cart

Your Cart is Empty

Back To Shop

Cart

Your Cart is Empty

Back To Shop
24/7/365 Support +254720548999

MiniKom EasyF broadband multiband amplifier 5 inputs: Televes   Kenya

Share On:

Configurable headend multiband amplifier
for MATV systems with separate amplification that guarantees the absence of
intermodulation among inputs. Equipped with 5 inputs:
FM-VHF-UHF-21…35-39….48. The UHF band is divided in 2 of the inputs,
which is useful in two-repeater reception installations since it allows an
appropriate filtering of the channels for each of them.

MiniKom EasyF broadband multiband
amplifier

5 inputs: FM-VHF-UHF-21..35-39..48

Configurable headend multiband amplifier for MATV systems with separate
amplification that guarantees the absence of intermodulation among inputs.

Equipped with 5 inputs: FM-VHF-UHF-21…35-39….48. The UHF band is
divided in 2 of the inputs, which is useful in two-repeater reception
installations since it allows an appropriate filtering of the channels for
each of them. The VHF and UHF inputs have both selectable gain margins,
whereas the FM input has a single amplifying stage.

Equipped with a LTE700 filter, and an output LED signal indicator for
immediate network failure detection.

Stands out for
Very compact size (103x103x 50mm)
LEDs indicating the existence of signal in output and power supply
Configurable gain via switch (high/low) and high output level
Two amplification stages for TV bands
Switching power supply that guarantees low consumption
EasyF connection system
High armor chassis, made of Zamak
Main features
Test output (-30dB)
Intuitive front cover, with settings and block diagram
LNB power selection switch: local or remote
ON/OFF switch for DC pass through the VHF and UHF inputs, for powering
preamplifiers or BOSS systems
screwable on the wall
Discover
EasyF connection system: simplicity and savings
The EasyF is an innovative connection concept of the internal conductor of
the coaxial cable (live), which is inserted directly into the device,
increasing the reliability of the connection. In addition, thanks to the
absence of “F” connectors, it is possible to reduce the chassis and
secure the connection of two cables with a single screw.

Real time savings: it is possible to speed up the installation, since it is
not necessary to carry out the connectorization of the coaxial cables. In
addition, the threading process of the connectors on the device, which is
sometimes complicated when the space is not enough, is avoided.
Reliability of connection: the clamp that holds the cables prevents the
coaxial from coming loose
Cost savings: no additional connector (neither “F” nor
“IEC”) needed
Space optimization: inputs and outputs are always located on the same side
of the device, avoiding bending coaxial cables and facilitating work inside
cabinets and registers
Very simple assembly in three steps: only screwing and unscrewing of the
covers is required to connect two cables:
1. Unscrew the cover of the device to access the connection

2. Insert the previously stripped coaxial cables

3. Close the lid and screw to secure the connection

Find out more about the reliability of the EasyF system
With EasyF, the connection of the coaxial cable to the device is carried
out by means of an automated system for inserting the live (internal
conductor) by contact, without requiring soldering.

Like the first day: the lifetime of the device is increased by eliminating
the possible deterioration of the welds over time
Reduced failure rate: generally caused by cold welds
Optimization of electromagnetic behaviour: at high frequencies
Reinforcement of our commitment to the environment: pollution caused by the
welding process is eliminated and electricity consumption in production is
reduced
Specifications
Bands UHF BV BIV VHF FM
Frequency margin MHz 470…694 614…694 470…590 174…400 88…108
Gain 0 dB 36 35 34 34 15
10 26 25 24 24
Gain adjustment range Manual
0 … 20 Manual
0 … 20 Manual
0 … 20 Manual
0 … 20 Manual
0 … 20
Max. output level IMD3 (2ch, -35dB) dBμV 123 123 123 121 120
DIN 45004B 116 116 116 114 113
IMD3 (2ch, -60dB) 113 113 113 111 –
IMD2 (2ch, -60dB) – – – 103 –
Noise figure dB 10 10 10 5 6
Test -30
Power supply inputs V 12 12 12 12 –
Max. current through inputs mA 200 200 200 200 –
400 max.
Mains voltage / frequency V~ /Hz 220 – 230 / 50-60
Total AC consumption (without input powering) OFF W, mA 4.6 / 55
Total AC consumption (with input powering) ON W, mA  10.5 / 110
Protection index IP 20
Operating temperature range ºC -5 … +45

image

https://adishnetservices.com/wp-content/uploads/2023/11/minikom-easyf-broadband-multiband-amplifier-5-inputs-fm-vhf-uhf-2135-3948-lte700-televes-300×300.jpg?wpId=81221

Manufacturer

TELEVES

Chat with us

Share On:

Cart

Your Cart is Empty

Back To Shop