Thermostat with NO Contact 0…60?C for Rack 19″ Televes
KSh8,616.00
NO contact thermostat for temperature control inside the racks. When the temperature exceeds a certain threshold (adjustable), the thermostat contact closes activating the ventilation elements connected to it.
Thermostat with NO Contact
0…60?C for Rack 19″
NO contact thermostat for temperature control inside the racks. When the temperature exceeds a certain threshold (adjustable), the thermostat contact closes activating the ventilation elements connected to it.
Installing a thermostat improves energy efficiency by activating the fans only when necessary. This avoids unnecessary consumption and also provides greater durability to the ventilation system due to the reduction of the operating time.
Highlights
NO contact: Normally open. The contact closes when a certain temperature is reached, allowing the passage of current and thus activating the connected elements
Simple assembly: Clip system with 4 feet, easy to assemble and disassemble. Suitable for 35mm DIN rail, EN 60715
Wide temperature regulation range from 0 to 60?C
Main features
Made of ABS V0 (S / UL94) flame retardant and highly impact resistant plastic. ProtectionIP20
High durability, more than 100,000 cycles
Gray color
Related products
-
Add to cartDesigned to hold up to 24 female RJ45 connectors, it can be used as a junction point (data patch panel). Its use, allows to have a fixed data distribution network, to which we can replace the signal it has, with a simple reconnection on the panel.
-
Add to cartThe 37U rack is used to introduce passive or active equipment inside, allowing it to be visible and protected under a secure (steel) and locked structure. Compatible with fiber optic, data cable, or coaxial cable installations, it allows the different technologies to be grouped in the same cabinet. Designed for ground installation. Supplied assembled.
-
Add to cartTray with 4 fans that is installed on the ceiling of a rack cabinet to force the cooling of the structure. This creates an air current inside the cabinet, facilitating the dissipation of heat from the electronic components installed inside and maintaining an adequate temperature range.
-
Add to cartRubber plug sized to fit SC Simplex and LC Duplex holes. These covers prevent the entry of dust or other elements into the unused connections of panels and trays, to avoid operating problems and extend the useful life of the rack elements.
-
Add to cartThe 42U rack is used to introduce passive or active equipment inside, allowing it to be visible and protected under a secure (steel) and locked structure. Compatible with fiber optic, data cable, or coaxial cable installations, it allows the different technologies to be grouped in the same cabinet. It is ideal for installation of headends such as GPON. Supplied assembled.
Reviews
There are no reviews yet.