Welcome to Adishnetservices Market Place.
24/7/365 Support +254720548999

Cart

Your Cart is Empty

Back To Shop

Cart

Your Cart is Empty

Back To Shop
24/7/365 Support +254720548999

WaveBox Device: Management and Monitoring for WaveData Televes Networks

Share On:

Device that allows the management of
WaveData access point networks in a simple and versatile way. Thanks to its
powerful Dual Core CPU, it allows the execution of monitoring and management
tasks quickly and efficiently. WaveBox incorporates the following
applications: AdminService: for configuration of the device itself. WaveProv
– to provision WaveData devices.

High Gain Mast Amplifier (LTE700, 2nd
Digital Dividend)

1 input: FM/BIII/DAB/UHF

Mast-mounted amplifier to amplify terrestrial television signals from an
antenna.

It consists of a single input with amplification in several bands. The
amplifier is powered at 24Vdc through the output coaxial cable.

RED compliant.

Stands out for
Separate amplification of each band
High gain manual adjustment
EasyF connection system
Fully automated manufacturing subjected to rigorous quality controls
High armor chassis, made of Zamak
Characteristics
LTE700 / 5G filter to eliminate telephony interference
ON / OFF switch to allow DC through to the input, to power a BOSS
system
Simple assembly. Flange for fixing to the mast included
Durable orange ABS plastic housing for outdoor installation
EasyF connection system: simplicity and savings
The EasyF is an innovative connection concept for the inner conductor of
the coaxial (live) cable, which is inserted directly into the device,
increasing the reliability of the connection. Furthermore, thanks to the
absence of “F” connectors, it is possible to reduce the chassis and
secure the connection of two cables with a single screw.

Real time savings: speeding up the installation is possible, as it is not
necessary to make the connectorization of the coaxial cables. In addition,
the process of threading the connectors on the device is avoided, which is
sometimes complicated when space is not enough.
Connection reliability: the cable tie that holds the cables prevents the
coaxial from loosening
Cost savings: no additional connector (neither “F” nor
“CEI”) is required
Space optimization: inputs and outputs are always located on the same side
of the device, avoiding bending of coaxial cables and facilitating work
inside cabinets and registers
Very simple assembly in three steps: you only need to screw and unscrew the
covers to connect two cables:
1. Unscrew the cover of the device to access the connection

2. Insert the previously stripped coaxial cables

3. Close the cover and screw to secure the connection

Find out more about the reliability of the EasyF system
With EasyF, the connection of the coaxial cable in the device is carried
out by means of an automated system of insertion of the live (internal
conductor) by contact, without requiring soldering.

Like the first day: the life of the device increases by eliminating the
possible deterioration of the welds with the passage of time
Reduced failure rate: generally caused by cold welding
Optimization of electromagnetic behavior: at high frequencies
Reinforcement of our commitment to the environment: pollution caused by the
welding process is eliminated and electricity consumption in production is
reduced
Specifications
Bands FM / BIII / DAB / UHF
Frequency range MHz 88 … 108 174 … 254 470 … 694
Gain dB fifteen 32 36
Gain regulation margin dB 0 … 20 0 … 20
Output level dBμV EN 50083 (-35dB) 122 122 123
DIN 45004B 115 115 116
EN 50083 (-60dB) 112 112 113
Noise figure dB — 5 5
Feeding V / mA 24/80
Current max. tickets OFF mA –
ON Four. Five
Protection index IP 2. 3
Operating temperature range ºC -5 … +45
Application example

image

https://adishnetservices.com/wp-content/uploads/2023/11/wavebox-device-management-and-monitoring-for-wavedata-televes-networks-300×300.jpg?wpId=81625

Manufacturer

TELEVES

Brand

Chat with us

Share On:

Cart

Your Cart is Empty

Back To Shop