Category: Amplification
Amplification
Showing 1–60 of 154 results
-
Add to cartDomestic amplifier with 6 outputs, to extend the terrestrial television domestic network.
Equipped with LTE700 4G/5G filtering.
Highlights
Low-impact visual design and limited size
Integrated high-performance switched-mode power supply (40% less than a standard amplifier )
Fully automated manufacturing subject to the most stringent quality controls
Features
Manual gain control, protected by a folding cover
Can be wall-mounted using screws
?F? connectors
Specifications
VHF/UHF
Frequency band MHz 47-68/174-400 470-694
Inputs 6 (F) 6 (F)
Gain G dB 6 14
Gain regulation margin marg – AUTO
Output level (Vout) DIN 45004B? dB?V 104 102
IMD3(2tones, -35dB) 97 95
10CH DVB-T – 83
Noise figure N.F. dB – 0 … 12 -
Alcad AI-100 Indoor amplifier 1+1 outputs
KSh8,512.00Add to cartAlcad AI-100 – Serie 904: Indoor amplifier 1+1 outputs.
Broadband apartment amplifier for terrestrial TV, with built-in power supply unit. It amplifies the VHF and UHF bands separately and has an independent gain control for each band. It includes two outputs to make the distribution to two or more televisions. The outputs are equal or unbalanced.
Applications
Designed to enlarge analogue and digital terrestrial TV installations within an apartment or house. It amplifies the TV signal so a distribution with several new outlets can be made from the signal of one TV outlet or from the coaxial cable entering the house. The levels are easily adjusted by means of the two gain controls.
Characteristics
Made from ABS plastic, with an internal zamak chassis which gives maximum shielding. The power supply unit is insulated from the rest of the high frequency circuit, complying with the safety regulations for the installer and the user. Fixed to the wall by means of the supplied screwsand wall-plugs. F type connectors.
Downloads
Technical specification
Technical specification
Manuals
– pdf 146.32 KB
Catalogues
CATALOGUE_ALCAD_EN_MULTIMEDIA_TV pdf 5.42 MB
Technical specifications
-
Alcad AI-133 Indoor amp 1 output catv rp 65 mhz
KSh10,358.00Add to cartAlcad AI-133 – Serie 904: Indoor amp 1 output catv rp 65 mhz.
Broadband apartment amplifier for terrestrial TV, with built-in power supply unit. It amplifies the VHF and UHF bands separately and has an independent gain control for each band. It includes two outputs to make the distribution to two or more televisions. The outputs are equal or unbalanced.
Applications
Designed to enlarge analogue and digital terrestrial TV installations within an apartment or house. It amplifies the TV signal so a distribution with several new outlets can be made from the signal of one TV outlet or from the coaxial cable entering the house. The levels are easily adjusted by means of the two gain controls.
Characteristics
Made from ABS plastic, with an internal zamak chassis which gives maximum shielding. The power supply unit is insulated from the rest of the high frequency circuit, complying with the safety regulations for the installer and the user. Fixed to the wall by means of the supplied screws and wall-plugs. F type connectors.
Downloads
Technical specification
Technical specification
Manuals
– pdf 202.61 KB
Catalogues
CATALOGUE_ALCAD_EN_MULTIMEDIA_TV pdf 5.42 MB
Technical specifications
-
Alcad AI-223 Indoor ampl 2 outputs catv (rp 65mhz)
KSh10,114.00Add to cartAlcad AI-223 – Serie 904: Indoor ampl 2 outputs catv (rp 65mhz).
Broadband apartment amplifier for terrestrial TV, with built-in power supply unit. It amplifies the VHF, UHF and interband bands continuously and includes a return path. It has a gain control and two outputs for the distribution to two or more televisions.
Applications
Designed to enlarge analogue and digital terrestrial TV installations within a house. Especially appropriate as an apartment amplifier in cable TV networks or in community installations where the interband bands are used. It amplifies the TV signal so a new distribution can be made from the signal of one TV outlet or from the coaxial cable entering the house.
Characteristics
Made from ABS plastic, with an internal zamak chassis which gives maximum shielding. The power supply unit is insulated from the rest of the high frequency circuit. Fixed to the wall by means of the supplied screws and wall-plugs. F type connectors.
Downloads
Technical specification
Technical specification
Manuals
– pdf 198.58 KB
Catalogues
CATALOGUE_ALCAD_EN_MULTIMEDIA_TV pdf 5.42 MB
Technical specifications
-
Alcad AI-271 Indoor amplifier 2 outputs lte700
KSh9,902.00Add to cartAlcad AI-271 – Serie 904: Indoor amplifier 2 outputs lte700.
Broadband apartment amplifier for terrestrial TV, LTE700 compatible, with built-in power supply unit. It amplifies the VHF and UHF bands separately and has an independent gain control for each band. It includes two outputs to make the distribution to two or more televisions.
Applications
Designed to enlarge analogue and digital terrestrial TV installations within an apartment or house. It amplifies the TV signal so a distribution with several new outlets can be made from the signal of one TV outlet or from the coaxial cable entering the house. The levels are easily adjusted by means of the two gain controls.
Characteristics
Fresh look, with a case made of ABS plastic for better impact resistance, with an internal zamak chassis which gives maximum shielding and extended range power supply. Easy wall fixing thanks to the supplied screwsand wall-plug or, alternatively, DIN rail installation by means of an adapter (not supplied). F type connectors.
Downloads
Technical specification
Technical specification
Manuals
AI-271 Manual pdf 788.59 KB
Catalogues
CATALOGUE_ALCAD_EN_MULTIMEDIA_TV pdf 5.42 MB
Certificates
CE Declaration – AI-271 pdf 149.8 KB
Flyers
AI-201 & AI-271 flyer pdf 1.09 MB
Technical specifications
-
Alcad AI-400 Indoor amplifier 4 outputs
KSh11,012.00Add to cartAlcad AI-400 – Serie 904: Indoor amplifier 4 outputs.
Broadband apartment amplifier for terrestrial TV, with built-in power supply unit. It amplifies the VHF and UHF bands separately and has an independent gain control for each band. It includes four outputs to make the distribution to 4 or more televisions. The outputs are equal or unbalanced.
Applications
Designed to enlarge analogue and digital terrestrial TV installations within an apartment or house. It amplifies the TV signal so a distribution with several new outlets can be made from the signal of one TV outlet or from the coaxial cable entering the house. The levels are easily adjusted by means of the two gain controls.
Characteristics
Made from ABS plastic, with an internal zamak chassis which gives maximum shielding. The power supply unit is insulated from the rest of the high frequency circuit, complying with the safety regulations for the installer and the user. Fixed to the wall by means of the supplied screws and wall-plugs. F type connectors.
Downloads
Technical specification
Technical specification
Manuals
– pdf 198.58 KB
Catalogues
CATALOGUE_ALCAD_EN_MULTIMEDIA_TV pdf 5.42 MB
Technical specifications
-
Alcad AI-414 Indoor amp tv+if 4 outputs dc path
KSh14,822.00Add to cartAlcad AI-414 – Serie 904: Indoor amp tv+if 4 outputs dc path.
Broadband apartment amplifier for terrestrial and satellite TV for installation with multiswitches, with 4 inputs and built-in powern supply unit. It amplifies the terrestrial TV and IF satellite bands separately. It has an independent gain control for each band and a fixed slope on the FI band.
Applications
Designed to enlarge analogue and digital terrestrial and satellite TV installations within an apartment or house. It amplifies the terrestrial and satellite TV signals from the output of the multiswitch so a distribution with TV-SAT outlets can be made. The levels are easily adjusted by means of the two built-in gain controls.
Characteristics
Made from ABS plastic, with an internal zamak chassis which gives maximum shielding. The power supply unit is insulated from the rest of the high frequency circuit. Fixed to the wall by means of the supplied screws and wall-plugs. F type connectors.
Downloads
Technical specification
Technical specification
Manuals
– pdf 330.82 KB
Catalogues
CATALOGUE_ALCAD_EN_MULTIMEDIA_TV pdf 5.42 MB
Technical specifications
-
Alcad AL-100 Power supply 24 vdc 100 ma
KSh7,078.00Add to cartAlcad AL-100 – Serie 903: Power supply 24 vdc 100 ma.
Power supply units for mast amplifiers, 24 voltages. The power supply unit converts the mains supply into DC voltage and injects it into the coaxial cable to feed the amplifier. The signal coming from the antenna is distributed to its outputs. The power supply unit is available with two, four or five outputs. The power supply units are protected against overloads and short circuits. Available on request in 125 or 240 .
Applications
Individual digital and analogue terrestrial TV installations where mast amplifiers or antenna box preamplifiers are used. The feed voltage should be selected according to the amplifier installed.
Characteristics
Shielded zamak chassis, covered by an ABS plastic box for outdoor use. Power supply unit insulated from the high frequency circuit, complying with safety standards for both the installer and the user. Fixed to the wall by means of supplied wallplugs and screws. F type connectors. Supplied in individual or multiple packs.
Accessories
9120039 CM-004 Male F connector for ?6.6 mm coaxial cable 9080023 MC-302 Male F connector for ?7.0mm coaxial cable. 9120011 RS-275 Type F load of 75 ??. 9040078 DI-007 DIN rail adaptor
Downloads
Technical specification
Technical specification
Manuals
– pdf 130.03 KB
– pdf 178.25 KB
– pdf 141.19 KB
Catalogues
CATALOGUE_ALCAD_EN_MULTIMEDIA_TV pdf 5.42 MB
Certificates
CE_Declaration-TV_Systems_AL-BO pdf 34.29 KB
Technical specifications
-
Alcad AL-105 Power supply 12 vdc 100 ma
KSh6,226.00Add to cartAlcad AL-105 – Serie 903: Power supply 12 vdc 100 ma.
Power supply units for mast amplifiers, 12 voltages. The power supply unit converts the mains supply into DC voltage and injects it into the coaxial cable to feed the amplifier. The signal coming from the antenna is distributed to its outputs. The power supply units are protected against overloads and short circuits. Available on request in 125 or 240 .
Applications
Individual digital and analogue terrestrial TV installations where mast amplifiers or antenna box preamplifiers are used. The feed voltage should be selected according to the amplifier installed.
Characteristics
Shielded zamak chassis, covered by an ABS plastic box for outdoor use. Power supply unit insulated from the high frequency circuit, complying with safety standards for both the installer and the user. Fixed to the wall by means of supplied wallplugs and screws. F type connectors. Supplied in individual or multiple packs.
Accessories
9120039 CM-004 Male F connector for ?6.6 mm coaxial cable 9080023 MC-302 Male F connector for ?7.0mm coaxial cable. 9120011 RS-275 Type F load of 75 ??. 9040078 DI-007 DIN rail adaptor.
Downloads
Technical specification
Technical specification
Manuals
– pdf 178.25 KB
– pdf 173.26 KB
Catalogues
CATALOGUE_ALCAD_EN_MULTIMEDIA_TV pdf 5.42 MB
Certificates
CE_Declaration-TV_Systems_AL-BO pdf 34.29 KB
Technical specifications
-
Add to cartAlcad AL-110 – Serie 903: Power supply 24 vdc 100ma, 4 outputs.
Power supply units for mast amplifiers, 24 voltages. The power supply unit converts the mains supply into DC voltage and injects it into the coaxial cable to feed the amplifier. The signal coming from the antenna is distributed to its outputs. The power supply unit is available with two, four or five outputs. The power supply units are protected against overloads and short circuits. Available on request in 125 or 240
Applications
Individual digital and analogue terrestrial TV installations where mast amplifiers or antenna box preamplifiers are used. The feed voltage should be selected according to the amplifier installed. Characteristics Shielded zamak chassis, covered by an ABS plastic box for outdoor use. Power supply unit insulated from the high frequency circuit, complying with safety standards for both the installer and the user. Fixed to the wall by means of supplied wallplugs and screws. F type connectors. Supplied in individual or multiple packs.
Accessories
9120039 CM-004 Male F connector for ?6.6 mm coaxial cable 9080023 MC-302 Male F connector for ?7.0mm coaxial cable. 9120011 RS-275 Type F load of 75 ??. 9040078 DI-007 DIN rail adaptor
Downloads
Technical specification
Technical specification
Manuals
– pdf 178.25 KB
Catalogues
CATALOGUE_ALCAD_EN_MULTIMEDIA_TV pdf 5.42 MB
Technical specifications
-
Alcad AL-245 Power supply 12/13/18 vdc 400 ma
KSh7,402.00Add to cartAlcad AL-245 – Serie 903: Power supply 12/13/18 vdc 400 ma.
Power supply unit for mast amplifier with SAT multiplexing. Voltage supply 12Vdc. If LNB control signal is received it powers both the amplifier and the LNB with the control signal comming from the SAT receiver. The output voltage is injected into the coaxial cable to power the amplifier and the LNB. The signal coming from the antenna is distributed to its two outputs. Protected against overloads and short circuits.
Applications
Individual terrestrial ans satellite TV installations, digital and analogue, where mast amplifiers with SAT multiplexing are used.
Characteristics
Shielded zamak chassis, covered by an ABS plastic box. Power supply unit insulated from the high frequency circuit, complying with safety standards for both the installer and the user. Fixed to the wall by means of supplied wallplugs and screws. F type connectors.
Downloads
Technical specification
Technical specification
Manuals
AL-245 HN pdf 824.47 KB
AL-245 Manual pdf 991.42 KB
Catalogues
CATALOGUE_ALCAD_EN_MULTIMEDIA_TV pdf 5.42 MB
Certificates
CE Declaration – AL-245 pdf 71 KB
Technical specifications
-
Add to cartAlcad ALC-290 – Serie 962: Power supply 48v dc 65.3 va 100-240 vac.
Downloads
Technical specification
Technical specification
Catalogues
CATALOGUE_ALCAD_EN_DES pdf 5.85 MB
Certificates
DEC_ALC-290 pdf 92.93 KB
Technical specifications
-
Alcad AM-190 Amp uhf 20 db lte700 mast 24 vdc
KSh6,912.00Add to cartAlcad AM-190 – Serie 903: Amp uhf 20 db lte700 mast 24 vdc.
Broadband amplifiers for masts, compatible with LTE700 and LTE800 mobile telephone signals with amplification band in UHF 470-694 MHz. They have one input to amplify and combine the signals from the antennas. They are fed through the coaxial cable from a power supply unit installed inside the building. They incorporate a switchable DC path, allowing power to be supplied to a preamplifier.
Applications
Individual digital and analogue terrestrial TV installations which are affected by the transmission of LTE700 and LTE800 mobile phone signals and which require low gain. They amplify and mix the signals from several antennas. The signal obtained can be distributed to a large number of TV outlets by means of a single coaxial cable.
Characteristics
Shielded zamak chassis, covered by a weather-resistant plastic casing. Easy to open and close, the chassis can be tilted to facilitate manipulation. It can be installed either on a mast, by means of a polyamide clamp, or on a wall. Resistant to sun and water (IP53). Greater insulation between inputs and outputs. F-type connectors for screwing or crimping.
Accessories
9030086 AL-100 24 power supply unit. 9120039 CM-004 Male F connector for ?6.6 mm coaxial. 9080023 MC-302 Male F connector for RG-6 coaxial, ?7.0 mm. 9080030 MC-304 Male compression F connector for RG-6 coaxial, ?7.0 mm
Downloads
Technical specification
Technical specification
Manuals
Manual pdf 251.86 KB
Catalogues
CATALOGUE_ALCAD_EN_MULTIMEDIA_TV pdf 5.42 MB
Certificates
CE_Declaration-TV_Systems pdf 65.95 KB
-
Alcad AM-195 Amp uhf 32 db lte700 mast 24 vdc
KSh7,648.00Add to cartAlcad AM-195 – Serie 903: Amp uhf 32 db lte700 mast 24 vdc.
Broadband amplifiers for masts, compatible with LTE700 mobile telephone signals with amplification band in UHF 470-694 MHz. They have one input to amplify and combine the signals from the antennas. They are fed through the coaxial cable from a power supply unit installed inside the building. They incorporate a switchable DC path, allowing power to be supplied to a preamplifier.
Applications
Individual digital and analogue terrestrial TV installations which are affected by the transmission of LTE700 mobile phone signals and which require low gain. They amplify and mix the signals from several antennas. The signal obtained can be distributed to a large number of TV outlets by means of a single coaxial cable.
Characteristics
Shielded zamak chassis, covered by a weather-resistant plastic casing. Easy to open and close, the chassis can be tilted to facilitate manipulation. It can be installed either on a mast, by means of a polyamide clamp, or on a wall. Resistant to sun and water (IP53). Greater insulation between inputs and outputs. F-type connectors for screwing or crimping.
Accessories
9030086 AL-100 24 power supply unit. 9120039 CM-004 Male F connector for ?6.6 mm coaxial. 9080023 MC-302 Male F connector for RG-6 coaxial, ?7.0 mm. 9080030 MC-304 Male compression F connector for RG-6 coaxial, ?7.0 mm
Downloads
Technical specification
Technical specification
Manuals
Manual pdf 251.86 KB
Catalogues
CATALOGUE_ALCAD_EN_MULTIMEDIA_TV pdf 5.42 MB
Certificates
CE_Declaration-TV_Systems pdf 65.95 KB
Technical specifications
-
Add to cartAlcad AM-292 – Serie 903: Amp uhf-dab/fm 20 db lte700 mast 24 vdc.
Broadband amplifiers for masts, compatible with LTE700 and LTE800 mobile telephone signals with amplification band in UHF 470-694 MHz. They have two inputs to amplify and combine the signals from the antennas. They are fed through the coaxial cable from a power supply unit installed inside the building. They incorporate a switchable DC path, allowing power to be supplied to a preamplifier.
Applications
Individual digital and analogue terrestrial TV installations which are affected by the transmission of LTE700 and LTE800 mobile phone signals and which require low gain. They amplify and mix the signals from several antennas. The signal obtained can be distributed to a large number of TV outlets by means of a single coaxial cable.
Characteristics
Shielded zamak chassis, covered by a weather-resistant plastic casing. Easy to open and close, the chassis can be tilted to facilitate manipulation. It can be installed either on a mast, by means of a polyamide clamp, or on a wall. Resistant to sun and water (IP53). Greater insulation between inputs and outputs. F-type connectors for screwing or crimping.
Accessories
9030086 AL-100 24 power supply unit. 9120039 CM-004 Male F connector for ?6.6 mm coaxial. 9080023 MC-302 Male F connector for RG-6 coaxial, ?7.0 mm. 9080030 MC-304 Male compression F connector for RG-6 coaxial, ?7.0 mm. CODE 9030165 9030166 9030172
Downloads
Technical specification
Technical specification
Manuals
Manual pdf 251.86 KB
Catalogues
CATALOGUE_ALCAD_EN_MULTIMEDIA_TV pdf 5.42 MB
Certificates
CE_Declaration-TV_Systems pdf 65.95 KB
-
Add to cartAlcad AM-296 – Serie 903: Amp uhf-dab/fm 32 db lte700 mast 24 vdc.
Broadband amplifiers for masts, compatible with LTE700 and LTE800 mobile telephone signals with amplification band in UHF 470-694 MHz. They have three inputs to amplify and combine the signals from the antennas. They are fed through the coaxial cable from a power supply unit installed inside the building. They incorporate a switchable DC path, allowing power to be supplied to a preamplifier.
Applications
Individual digital and analogue terrestrial TV installations which are affected by the transmission of LTE700 and LTE800 mobile phone signals and which require high gain. They amplify and mix the signals from several antennas. The signal obtained can be distributed to a large number of TV outlets by means of a single coaxial cable.
Characteristics
Shielded zamak chassis, covered by a weather-resistant plastic casing. Easy to open and close, the chassis can be tilted to facilitate manipulation. It can be installed either on a mast, by means of a polyamide clamp, or on a wall. Resistant to sun and water (IP53). Greater insulation between inputs and outputs. F-type connectors for screwing or crimping.
Accessories
9030086 AL-100 +24 power supply unit. 9120039 CM-004 Male F connector for ?6.6 mm coaxial. 9080023 MC-302 Male F connector for RG-6 coaxial, ?7.0 mm. 9080030 MC-304 Male compression F connector for RG-6 coaxial ?7.0 mm.
Downloads
Technical specification
Technical specification
Manuals
Manual pdf 251.86 KB
Catalogues
CATALOGUE_ALCAD_EN_MULTIMEDIA_TV pdf 5.42 MB
Certificates
CE_Declaration-TV_Systems pdf 65.95 KB
Technical specifications
-
Alcad AM-309 Amp groups uhf-uhf-vhf/fm mast
KSh12,274.00Add to cartAlcad AM-309 – Serie 903: Amp groups uhf-uhf-vhf/fm mast.
Configurable amplifiers for masts. The UHF inputs can be configured by adding low pass, high pass, band pass, monochannel, band rejection and channel rejection filters. The filters are installed during the factory manufacturing process and cannot be readjusted by the user. The attenuator located at each input makes it possible to control the gain to obtain an output with all the bands equalised.
Applications
Individual digital and analogue terrestrial TV installations which require an amplifier adapted to the specific needs of the area. The interference from undesired channels can be avoided through the use of the built-in filters. The type of filter and the initial and final channels should be specified in the order.
Characteristics
Shielded zamak chassis, covered by an ABS plastic box for outdoor use. Fixed to the mast by means of a polyamide clamp. F-type connectors.
Accessories
9030086 AL-100 +24 power supply unit. 9120039 CM-004 Male F connector for ?6.6 mm coaxial. 9080023 MC-302 Male F connector for RG-6 coaxial, ?7.0 mm.
Downloads
Technical specification
Technical specification
Manuals
– pdf 156.97 KB
Catalogues
CATALOGUE_ALCAD_EN_MULTIMEDIA_TV pdf 5.42 MB
-
Alcad AM-396 Amp uhf-uhf-dab/fm 32 db lte700 mast
KSh11,020.00Add to cartAlcad AM-396 – Serie 903: Amp uhf-uhf-dab/fm 32 db lte700 mast.
Broadband amplifiers for masts, compatible with LTE800 and LTE700 mobile signals (UHF amplification in the 470-694 MHz band). They have three inputs to amplify and combine the signals from the antennas. They are fed through the coaxial cable from a power supply unit installed inside the building. They incorporate a switchable DC path, allowing power to be supplied to a preamplifier.
Applications
Individual digital and analogue terrestrial TV installations which are affected by the transmission of LTE mobile phone signals and which require high gain. They amplify and mix the signals from several antennas. The signal obtained can be distributed to a large number of TV outlets by means of a single coaxial cable.
Characteristics
Shielded zamak chassis, covered by a weather-resistant plastic casing. Easy to open and close, the chassis can be tilted to facilitate manipulation. It can be installed either on a mast, by means of a polyamide clamp, or on a wall. Resistant to sun and water (IP53). Greater insulation between inputs and outputs. F-type connectors for screwing or crimping.
Accessories
9030086 AL-100 +24 power supply unit. 9120039 CM-004 Male F connector for ?6.6 mm coaxial. 9080023 MC-302 Male F connector for RG-6 coaxial, ?7.0 mm. 9080030 MC-304 Male compression F connector for RG-6 coaxial ?7.0 mm.
Downloads
Technical specification
Technical specification
Manuals
Manual pdf 251.86 KB
Catalogues
CATALOGUE_ALCAD_EN_MULTIMEDIA_TV pdf 5.42 MB
Certificates
CE_Declaration-TV_Systems pdf 65.95 KB
Technical specifications
-
Add to cartAlcad AM-397 – Serie 903: Amp uhf-biii/dab-fm 32 db lte700 24 vdc.
Broadband amplifiers for masts, compatible with LTE700 and LTE800 mobile telephone signals with amplification band in UHF 470-694 MHz. They have three inputs to amplify and combine the signals from the antennas. They are fed through the coaxial cable from a power supply unit installed inside the building. They incorporate a switchable DC path, allowing power to be supplied to a preamplifier.
Applications
Individual digital and analogue terrestrial TV installations which are affected by the transmission of LTE700 and LTE800 mobile phone signals and which require high gain. They amplify and mix the signals from several antennas. The signal obtained can be distributed to a large number of TV outlets by means of a single coaxial cable.
Characteristics
Shielded zamak chassis, covered by a weather-resistant plastic casing. Easy to open and close, the chassis can be tilted to facilitate manipulation. It can be installed either on a mast, by means of a polyamide clamp, or on a wall. Resistant to sun and water (IP53). Greater insulation between inputs and outputs. F-type connectors for screwing or crimping.
Accessories
9030086 AL-100 +24 power supply unit. 9120039 CM-004 Male F connector for ?6.6 mm coaxial. 9080023 MC-302 Male F connector for RG-6 coaxial, ?7.0 mm. 9080030 MC-304 Male compression F connector for RG-6 coaxial ?7.0 mm.
Downloads
Technical specification
Technical specification
Manuals
Manual pdf 232.44 KB
Catalogues
CATALOGUE_ALCAD_EN_MULTIMEDIA_TV pdf 5.42 MB
Certificates
DEC_AM_LTE700 pdf 65.95 KB
-
Add to cartAlcad AM-497 – Serie 903: Amp uhf-uhf-biii/dab-fm 32 db lte700 24v.
Broadband amplifiers for masts, compatible with LTE700 and LTE800 mobile telephone signals with amplification band in UHF 470-694 MHz. They have four inputs to amplify and combine the signals from the antennas. They are fed through the coaxial cable from a power supply unit installed inside the building. They incorporate a switchable DC path, allowing power to be supplied to a preamplifier.
Applications
Individual digital and analogue terrestrial TV installations which are affected by the transmission of LTE700 and LTE800 mobile phone signals and which require high gain. They amplify and mix the signals from several antennas. The signal obtained can be distributed to a large number of TV outlets by means of a single coaxial cable.
Characteristics
Shielded zamak chassis, covered by a weather-resistant plastic casing. Easy to open and close, the chassis can be tilted to facilitate manipulation. It can be installed either on a mast, by means of a polyamide clamp, or on a wall. Resistant to sun and water (IP53). Greater insulation between inputs and outputs. F-type connectors for screwing or crimping.
Accessories
9030086 AL-100 +24 power supply unit. 9120039 CM-004 Male F connector for ?6.6 mm coaxial. 9080023 MC-302 Male F connector for RG-6 coaxial, ?7.0 mm. 9080030 MC-304 Male compression F connector for RG-6 coaxial ?7.0 mm.
Downloads
Technical specification
Technical specification
Manuals
Manual pdf 368.98 KB
Catalogues
CATALOGUE_ALCAD_EN_MULTIMEDIA_TV pdf 5.42 MB
-
Alcad AM-696 Amp sat-uhf-dab/fm 32 db mat
KSh10,596.00Add to cartAlcad AM-696 – Serie 903: Amp sat-uhf-dab/fm 32 db mat.
Broadband amplifiers for masts, amplifies the signal from terrestrial antennas and multiplexes the satellite signal. Powered through the coaxial cable from a power supply unit installed inside the building. The LNB is controlled by the control signal comming from the satellite set-top-box. It incorporates a switchable DC path, allowing power to be supplied to an antenna preamplifier. Compatible with LTE700 and LTE800 mobile telephone signals. UHF Amplification band 470-694 MHz.
Applications
Individual terrestrial and satellite TV installations, digital and analogue. It amplifes the signal from two terrestrial antennas and combines the signals along with the satellite signal. The signal obtained can be distributed to a large number of TV outlets by means of a single coaxial cable.
Characteristics
Shielded zamak chassis, with a weather-resistant plastic casing. Easy to open and close, the chassis can be tilted to facilitate manipulation. It can be installed either on a mast, by means of a polyamide zip tie, or on a wall. Resistant to sun and water (IP53). F-type compression or screwing connectors.
Downloads
Technical specification
Technical specification
Manuals
AM-696 HN pdf 824.47 KB
AM-696 Manual pdf 991.42 KB
Catalogues
CATALOGUE_ALCAD_EN_MULTIMEDIA_TV pdf 5.42 MB
Certificates
CE Declaration – AM-696 pdf 71 KB
Technical specifications
-
Alcad AM-915 Amp uhf-dab 40 db lte700 mast
KSh7,800.00Add to cartAlcad AM-915 – Serie 903: Amp uhf-dab 40 db lte700 mast.
Broadband amplifiers for masts, compatible with LTE800 and LTE700 mobile signals (UHF amplification in the 470-694 MHz band). They have two inputs to amplify and combine the signals from the antennas. They have two outputs. They are fed through the coaxial cable from a power supply unit installed inside the building. They incorporate a switchable DC path, allowing power to be supplied to a preamplifier.
Applications
Individual digital and analogue terrestrial TV installations which are affected by the transmission of LTE mobile phone signals and which require very high gain. They amplify and mix the signals from several antennas. The signal obtained can be distributed to a large number of TV outlets by means of a single coaxial cable.
Characteristics
Shielded zamak chassis, covered by a weather-resistant plastic casing. Easy to open and close, the chassis can be tilted to facilitate manipulation. It can be installed either on a mast, by means of a polyamide clamp, or on a wall. Resistant to sun and water (IP53). Greater insulation between inputs and outputs. F-type connectors for screwing or crimping.
Accessories
9030086 AL-100 +24 power supply unit. 9120039 CM-004 Male F connector for ?6.6 mm coaxial. 9080023 MC-302 Male F connector for RG-6 coaxial, ?7.0 mm. 9080030 MC-304 Male compression F connector for RG-6 coaxial ?7.0 mm.
Downloads
Technical specification
Technical specification
Manuals
Manual pdf 299.28 KB
Catalogues
CATALOGUE_ALCAD_EN_MULTIMEDIA_TV pdf 5.42 MB
Certificates
CE_Declaration-TV_Systems pdf 65.95 KB
Technical specifications
-
Alcad AS-125 Power supply 24 vdc 1.7 a (230/240 vac)
KSh20,244.00Add to cartAlcad AS-125 – Serie 905: Power supply 24 vdc 1.7 a (230/240 vac).
Compact switching power supply units which permits the installation of up to 18 modules on the support frame.
Applications
Necessary to supply the amplification modules of the equipment. The number of modules which it can feed varies according to the consumption of the modules and of the consumption of the LNBs in the case of SAT amplifier modules.18 modules can be fed in the case of monochannel amplifiers.
Characteristics
Protected against overloads and short-circuits. Made from an aluminium profile and alvanised plate. It includes a protection fuse which the installer can access. Supplied with power cable with faston connector for IEC connector equipment.
Downloads
Technical specification
Technical specification
Manuals
– pdf 165.67 KB
– pdf 165.54 KB
– pdf 624.67 KB
– pdf 204.95 KB
– pdf 393.23 KB
– pdf 201.67 KB
– pdf 201.66 KB
– pdf 327.17 KB
– pdf 515.52 KB
Catalogues
CATALOGUE_ALCAD_EN_MULTIMEDIA_TV pdf 5.42 MB
Technical specifications
-
Add to cartAlcad AV-305 – Serie 909: Variable attenuator 18 db (5-2400 mhz).
Fixed and variable attenuators for terrestrial and satellite TV. The variable attenuators are equipped with an attenuation control. Available in different attenuation and pass bands according to the model. All models have a constant impedance of 75.
Applications
Used to attenuate signals which are too wrong. Installed at the input of equipment when the antenna level is excessive, or at the output when the output level of the equipment is excessive. Installed at the output of an outlet with excess signal, permitting a reduction in the level of signal that the television receives.
Characteristics
Shielded zamak chassis, with female input and output F connectors.
Downloads
Technical specification
Technical specification
Catalogues
CATALOGUE_ALCAD_EN_MULTIMEDIA_TV pdf 5.42 MB
Technical specifications
-
Add to cartAlcad AV-315 – Serie 909: Variable attenuator 18 db (5-2400mhz).
Fixed and variable attenuators for terrestrial and satellite TV. The variable attenuators are equipped with an attenuation control. Available in different attenuation and pass bands according to the model. All models have a constant impedance of 75. Applications Used to attenuate signals which are too wrong. Installed at the input of equipment when the antenna level is excessive, or at the output when the output level of the equipment is excessive. Installed at the output of an outlet with excess signal, permitting a reduction in the level of signal that the television receives. Characteristics Shielded zamak chassis, with female input and output F connectors.
Downloads
Technical specification
Technical specification
Catalogues
CATALOGUE_ALCAD_EN_MULTIMEDIA_TV pdf 5.42 MB
Technical specifications
-
Alcad BL-300 Current blocker (5-2400 mhz)
KSh2,892.00Add to cartAlcad BL-300 – Serie 909: Current blocker (5-2400 mhz).
DC Current blocker (5-2400MHz) for 913 series multiswitches, to avoid shortcircuits while suplying power to the switches
Downloads
Technical specification
Technical specification
Catalogues
CATALOGUE_ALCAD_EN_MULTIMEDIA_TV pdf 5.42 MB
Technical specifications
-
Alcad BO-190 Kit amp am-190 & power supply
KSh10,546.00Add to cartAlcad BO-190 – Serie 903: Kit amp am-190 & power supply.
Antennas for optimal reception of DTT channels, with the best available gain (18 dBi). Designed to cover the UHF band up to 790 MHz while rejecting the LTE mobile telephone band. Easy to mount and adjust, providing maximum robustness and ensuring complete safety of installation. With a stylish design which perfectly reflects the excellent electrical and mechanical qualities of the antenna.
Applications
Digital and analogue terrestrial TV installations, collective or individual, where rejection of the LTE band is necessary and high gain and directivity are required. The reflectors prevent interference produced by the signals received from the rear of the antenna.
Characteristics
Rejection of LTE and GSM signals. Manufactured in aluminium, zamak weather-resistant plastic and galvanised steel. Innovative spring-loaded clamp system for attaching to the mast, making installation even easier. The simplified pointing system with the antenna already fastened to the mast enables adjustments using a single hand. System for changing polarisation without removing the antenna from the mast. Watertight matching transformer casing (IP55). Matching transformer, with F-type connector, protected inside the casing. System of front-fixing reflectors for greater ease of assembly. No tools required for installation. Supplied in an individual pack.
Downloads
Technical specification
Technical specification
Manuals
Manual pdf 251.86 KB
Catalogues
CATALOGUE_ALCAD_EN_MULTIMEDIA_TV pdf 5.42 MB
Certificates
CE_Declaration-TV_Systems pdf 65.95 KB
-
Alcad BO-195 Kit amp am-195 & power supply
KSh10,690.00Add to cartAlcad BO-195 – Serie 903: Kit amp am-195 & power supply.
Kits consisting of a mast amplifier and a power supply unit. Both products are included in a single pack.
Characteristics
The characteristics are identical to those of the products which are supplied independently.
Downloads
Technical specification
Technical specification
Manuals
Manual pdf 251.86 KB
Catalogues
CATALOGUE_ALCAD_EN_MULTIMEDIA_TV pdf 5.42 MB
Certificates
CE_Declaration-TV_Systems pdf 65.95 KB
-
Alcad BO-292 Kit amp am-292 & power supply
KSh11,706.00Add to cartAlcad BO-292 – Serie 903: Kit amp am-292 & power supply.
Kits consisting of a mast amplifier and a power supply unit. Both products are included in a single pack.
Characteristics
The characteristics are identical to those of the products which are supplied independently.
Accessories
9120039 CM-004 Male F connector for ?6.6 mm coaxial. 9080023 MC-302 Male F connector for RG-6 coaxial, ?7.0 mm
Downloads
Technical specification
Technical specification
Manuals
Manual pdf 251.86 KB
Catalogues
CATALOGUE_ALCAD_EN_MULTIMEDIA_TV pdf 5.42 MB
Certificates
CE_Declaration-TV_Systems pdf 65.95 KB
-
Alcad BO-296 Kit amp am-296 & power supply
KSh12,196.00Add to cartAlcad BO-296 – Serie 903: Kit amp am-296 & power supply.
Kits consisting of a mast amplifier and a power supply unit. Both products are included in a single pack.
Characteristics
The characteristics are identical to those of the products which are supplied independently.
Accessories
9120039 CM-004 Male F connector for ?6.6 mm coaxial. 9080023 MC-302 Male F connector for RG-6 coaxial, ?7.0 mm
Downloads
Technical specification
Technical specification
Manuals
Manual pdf 251.86 KB
Catalogues
CATALOGUE_ALCAD_EN_MULTIMEDIA_TV pdf 5.42 MB
Certificates
CE_Declaration-TV_Systems pdf 65.95 KB
-
Alcad BO-396 Kit amp am-396 & power supply
KSh15,982.00Add to cartAlcad BO-396 – Serie 903: Kit amp am-396 & power supply.
Kits consisting of an AM-396 mast amplifier and an AL-100 power supply unit. Both products are included in a single pack.
Characteristics
The characteristics are identical to those of the products which are supplied independently.
Downloads
Technical specification
Technical specification
Manuals
Manual pdf 251.86 KB
Catalogues
CATALOGUE_ALCAD_EN_MULTIMEDIA_TV pdf 5.42 MB
Certificates
CE_Declaration-TV_Systems pdf 65.95 KB
Technical specifications
-
Alcad BO-397 Kit amp am-397 & power supply 24 vdc
KSh11,630.00Add to cartAlcad BO-397 – Serie 903: Kit amp am-397 & power supply 24 vdc.
Kits consisting of a mast amplifier and a power supply unit. Both products are included in a single pack.
Characteristics
The characteristics are identical to those of the products which are supplied independently.
Accessories
9120039 CM-004 Male F connector for ?6.6 mm coaxial. 9080023 MC-302 Male F connector for RG-6 coaxial, ?7.0 mm
Downloads
Technical specification
Technical specification
Manuals
Manual pdf 232.44 KB
Catalogues
CATALOGUE_ALCAD_EN_MULTIMEDIA_TV pdf 5.42 MB
Certificates
DEC_AM_LTE700 pdf 65.95 KB
-
Alcad BO-497 Kit amp am-497 & power supply 24 vdc
KSh14,170.00Add to cartAlcad BO-497 – Serie 903: Kit amp am-497 & power supply 24 vdc.
Kits consisting of a mast amplifier and a power supply unit. Both products are included in a single pack.
Characteristics
The characteristics are identical to those of the products which are supplied independently.
Accessories
9120039 CM-004 Male F connector for ?6.6 mm coaxial. 9080023 MC-302 Male F connector for RG-6 coaxial, ?7.0 mm
Downloads
Technical specification
Technical specification
Manuals
Manual pdf 368.98 KB
Catalogues
CATALOGUE_ALCAD_EN_MULTIMEDIA_TV pdf 5.42 MB
Certificates
CE_Declaration-TV_Systems_AL-BO pdf 34.29 KB
-
Alcad BO-696 Kit amp am-696 & power supply al-245
KSh17,524.00Add to cartAlcad BO-696 – Serie 903: Kit amp am-696 & power supply al-245.
Kits consisting of a mast amplifier and a power supply unit. Both products are included in a single pack.
Characteristics
The characteristics are identical to those of the products which are supplied independently.
Downloads
Technical specification
Technical specification
Manuals
BO-696 HN pdf 824.47 KB
BO-696 Manual pdf 991.42 KB
Catalogues
CATALOGUE_ALCAD_EN_MULTIMEDIA_TV pdf 5.42 MB
Certificates
CE Declaration – BO-696 pdf 71 KB
Technical specifications
-
Alcad BO-915 Kit amp am-915 & power supply
KSh12,722.00Add to cartAlcad BO-915 – Serie 903: Kit amp am-915 & power supply.
Kits consisting of an AM-915 mast amplifier and an AL-100 power supply unit. Both products are included in a single pack.
Characteristics
The characteristics are identical to those of the products which are supplied independently.
Downloads
Technical specification
Technical specification
Manuals
Manual pdf 299.28 KB
Catalogues
CATALOGUE_ALCAD_EN_MULTIMEDIA_TV pdf 5.42 MB
Certificates
CE_Declaration-TV_Systems pdf 65.95 KB
Technical specifications
-
Alcad CA-210 Amplifier 2 outputs 24 vdc
KSh9,766.00Add to cartAlcad CA-210 – Serie 904: Amplifier 2 outputs 24 vdc.
Broadband head-end amplifiers with several inputs. Built on a compact chassis, they are capable of supplying a signal to a large number of outlets. Some of the models have two identical outputs in order to increase the number of outlets. Available on request in 125 or 240 V~.
Applications
Designed for analogue and digital terrestrial TV installations in medium-sized MATV networks or individual installations. They are used as the head-end amplifier of the installation. The two outputs models facilitate star-shaped distribution from the head-end through the use of splitters.
Characteristics
Made from ABS plastic, with an internal zamak chassis of which provides maximum shielding. F type connectors which affords a connection with minimum mismatching and high shielding. Power supply unit insulated from the rest of the high frequency circuit, complying with all safety standards.
Downloads
Technical specification
Technical specification
Manuals
– pdf 198.58 KB
Catalogues
CATALOGUE_ALCAD_EN_MULTIMEDIA_TV pdf 5.42 MB
Technical specifications
-
Alcad CA-215 Amplifier 2 outputs 12 vdc
KSh9,250.00Add to cartAlcad CA-215 – Serie 904: Amplifier 2 outputs 12 vdc.
The amplifiers are equivalent to the basic models but with different preamplifier feed voltages.
Characteristics
The electrical characteristics are identical to those of the equivalent products, except for the preamplifier feed voltages.
Downloads
Technical specification
Technical specification
Manuals
– pdf 198.58 KB
Catalogues
CATALOGUE_ALCAD_EN_MULTIMEDIA_TV pdf 5.42 MB
Certificates
CE_Declaration-TV_Systems pdf 65.95 KB
Technical specifications
-
Add to cartAlcad CA-220 – Serie 904: Broadband amplifier tv+if 4 out (24 vdc).
TV and SAT broadband head-end amplifier. They independently amplify the terrestrial TV and satellite IF bands, distribute both bands through their four outputs continuously. The built-in power supply unit can automatically feed a preamplifier. The LNB is fed from the SAT receiver, through the amplifier.
Applications
Designed for use in individual, analogue and digital, terrestrial and satellite TV installations, with several TV outlets. Used as a single piece of equipment to treat all terrestrial and satellite TV signals, greatly simplifying the installation. An individual satellite receiver can be connected to any of the outlets of the building.
Characteristics
Made from ABS plastic with an internal chassis of zamak giving maximum shielding. F type connectors in nickel-plated iron which affords a connection of minimum mismatching and maximum shielding. The power supply unit is insulated from the rest of the high frequency circuit, complying with safety standards for both the installer and the user.
Downloads
Technical specification
Technical specification
Manuals
– pdf 300.03 KB
Catalogues
CATALOGUE_ALCAD_EN_MULTIMEDIA_TV pdf 5.42 MB
Technical specifications
-
Alcad CA-360 Amp uhf-uhf-vhf/fm 2 outputs lte700
KSh23,148.00Add to cartAlcad CA-360 – Serie 904: Amp uhf-uhf-vhf/fm 2 outputs lte700.
Broadband amplifiers for head-end, compatible with transmission of LTE700 and LTE800 mobile telephone signals. Includes a rejection filter for LTE700/800 signals. Equipped with three inputs to amplify and combine the signals coming from the antennas. Power supplied automatically to preamplifier. Available on request in 125 and 240 V~.
Applications
Medium-sized individual digital and analogue terrestrial TV installations which are affected by the transmission of LTE700 and LTE800 mobile telephone signals. It is used as the head-end amplifier of the installation. The two outputs facilitate star-shaped distributions from the head-end through the use of splitters.
Characteristics
Made from ABS plastic, with an internal zamak chassis of which provides maximum shielding. F type connectors which affords a connection with minimum mismatching and high shielding. Power supply unit insulated from the rest of the high frequency circuit, complying with all safety standards. F-type connectors for screwing on or crimping.
Downloads
Technical specification
Technical specification
Manuals
Manual pdf 269.61 KB
Catalogues
CATALOGUE_ALCAD_EN_MULTIMEDIA_TV pdf 5.42 MB
Technical specifications
-
Alcad CA-361 Amp uhf-vhf/fm 2 outputs lte700
KSh22,598.00Add to cartAlcad CA-361 – Serie 904: Amp uhf-vhf/fm 2 outputs lte700.
Broadband amplifiers for head-end, compatible with transmission of LTE700 and LTE800 mobile telephone signals. Includes a rejection filter for LTE700/800 signals. Equipped with two inputs to amplify and combine the signals coming from the antennas. Power supplied automatically to preamplifier. Available on request in 125 and 240 V~.
Applications
Medium-sized individual digital and analogue terrestrial TV installations which are affected by the transmission of LTE700 and LTE800 mobile telephone signals. It is used as the head-end amplifier of the installation. The two outputs facilitate star-shaped distributions from the head-end through the use of splitters.
Characteristics
Made from ABS plastic, with an internal zamak chassis of which provides maximum shielding. F type connectors which affords a connection with minimum mismatching and high shielding. Power supply unit insulated from the rest of the high frequency circuit, complying with all safety standards. F-type connectors for screwing on or crimping.
Downloads
Technical specification
Technical specification
Manuals
Manual pdf 269.61 KB
Catalogues
CATALOGUE_ALCAD_EN_MULTIMEDIA_TV pdf 5.42 MB
Technical specifications
-
Alcad CA-362 Ampli uhf-uhf-biii-bi/fm 2 out lte700
KSh22,598.00Add to cartAlcad CA-362 – Serie 904: Ampli uhf-uhf-biii-bi/fm 2 out lte700.
Broadband amplifiers for head-end, compatible with transmission of LTE700 and LTE800 mobile telephone signals. Includes a rejection filter for LTE700/800 signals. Equipped with four inputs to amplify and combine the signals coming from the antennas. Power supplied automatically to preamplifier. Available on request in 125 and 240 V~.
Applications
Medium-sized individual digital and analogue terrestrial TV installations which are affected by the transmission of LTE700 and LTE800 mobile telephone signals. It is used as the head-end amplifier of the installation. The two outputs facilitate star-shaped distributions from the head-end through the use of splitters.
Characteristics
Made from ABS plastic, with an internal zamak chassis of which provides maximum shielding. F type connectors which affords a connection with minimum mismatching and high shielding. Power supply unit insulated from the rest of the high frequency circuit, complying with all safety standards. F-type connectors for screwing on or crimping.
Downloads
Technical specification
Technical specification
Manuals
Manual pdf 269.61 KB
Catalogues
CATALOGUE_ALCAD_EN_MULTIMEDIA_TV pdf 5.42 MB
Technical specifications
-
Alcad CA-370 K2 amp, uhf-uhf-vhf, 2 outputs, lte700
KSh24,936.00Add to cartAlcad CA-370 – Serie 904: K2 amp, uhf-uhf-vhf, 2 outputs, lte700.
Head-end broadband amplifier with three inputs and two outputs. It has two UHF inputs with LTE700 rejection filters and another input for BI/FM/BIII/DAB. The two outputs have the same output level, with a maximum of 110 dB?V, and facilitate the creation of star-shaped distributions using splitters.
UHF1 input can power 24V preamplifiers with up to 60 mA. The installer can easilly switch the preamplifier power on and off.
The amplifier is powered with an external power supply, included with the product. It is also sold sepparately as FF-300 as a spare part, to be used for maintainance or repairs.
Its zamak chassis provides the amplifier with maximum shielding, while also making it very robust. The F-type connections also allow for minimum load mismatch and maximum shielding.
Downloads
Technical specification
Technical specification
Manuals
CA-370 Manual pdf 3.15 MB
Catalogues
CATALOGUE_ALCAD_EN_MULTIMEDIA_TV pdf 5.42 MB
Certificates
CE Declaration – CA-370 pdf 65.02 KB
Flyers
K2 broadband amplifiers pdf 3.14 MB
Technical specifications
-
Alcad CA-371 K2 ampli, uhf-vhf, 2 outputs, lte700
KSh24,318.00Add to cartAlcad CA-371 – Serie 904: K2 ampli, uhf-vhf, 2 outputs, lte700.
Head-end broadband amplifier with three inputs and two outputs. It has two UHF inputs with LTE700 rejection filters and another input for BI/FM/BIII/DAB. The two outputs have the same output level, with a maximum of 110 dB?V, and facilitate the creation of star-shaped distributions using splitters.
UHF1 input can power 24V preamplifiers with up to 60 mA. The installer can easilly switch the preamplifier power on and off.
The amplifier is powered with an external power supply, included with the product. It is also sold sepparately as FF-300 as a spare part, to be used for maintainance or repairs.
Its zamak chassis provides the amplifier with maximum shielding, while also making it very robust. The F-type connections also allow for minimum load mismatch and maximum shielding.
Downloads
Technical specification
Technical specification
Manuals
CA-371 Manual pdf 3.15 MB
Catalogues
CATALOGUE_ALCAD_EN_MULTIMEDIA_TV pdf 5.42 MB
Certificates
CE Declaration – CA-371 pdf 65.02 KB
Flyers
K2 broadband amplifiers pdf 3.14 MB
Technical specifications
-
Alcad CA-440 Amplifier uhf-uhf-biii/dab lte
KSh27,730.00Add to cartAlcad CA-440 – Serie 904: Amplifier uhf-uhf-biii/dab lte.
Broadband head-end amplifiers with three inputs. Built on a compact chassis, they are capable of supplying a signal to a large number of outlets. Available on request in 125 or 240 V~.
Applications
Designed for analogue and digital terrestrial TV installations in medium-sized MATV networks or individual installations. They are used as the head-end amplifier of the installation.
Characteristics
Made from ABS plastic, with an internal zamak chassis of which provides maximum shielding. F type connectors which affords a connection with minimum mismatching and high shielding. Power supply unit insulated from the rest of the high frequency circuit, complying with all safety standards.
Downloads
Technical specification
Technical specification
Manuals
– pdf 159.3 KB
Catalogues
CATALOGUE_ALCAD_EN_MULTIMEDIA_TV pdf 5.42 MB
-
Alcad CA-661 Amplifier uhf-biii-bi/fm lte700 everest
KSh28,460.00Add to cartAlcad CA-661 – Serie 904: Amplifier uhf-biii-bi/fm lte700 everest.
Broadband amplifier for head-end, with three inputs and different frequency configurations, compatible with the transmission of LTE700 and LTE800 mobile telephone signals. The built-in power supply unit can feed a preamplifiers by means of a switch. Optional external power supply for redundant power. Output test-point to adjust the installation without having to disconnect the TV signal.
Applications
Large-scale digital and analogue MATV installations which are affected by the transmission of LTE700 and LTE800 mobile telephone signals. Suitable for installations where the channels of each band are received at similar levels. Adjustment by means of switches and regulators which control the gain at each input.
Characteristics
Made from zamak and galvanised steel plate to provide maximum shielding. Input and output connectors in the opposite sides to facilitate installation. F-type connectors.
Downloads
Technical specification
Technical specification
Manuals
Manual pdf 1.3 MB
Catalogues
CATALOGUE_ALCAD_EN_MULTIMEDIA_TV pdf 5.42 MB
Certificates
CE Declaration – CA-661-662-663 20210716 pdf 70.79 KB
Technical specifications
-
Alcad CA-662 Ampli uhf-uhf-biii-bi/fm lte700 everest
KSh29,146.00Add to cartAlcad CA-662 – Serie 904: Ampli uhf-uhf-biii-bi/fm lte700 everest.
Broadband amplifier for head-end, with four inputs and different frequency configurations, compatible with the transmission of LTE700 and LTE800 mobile telephone signals. The built-in power supply unit can feed a preamplifiers by means of a switch. Optional external power supply for redundant power. Output test-point to adjust the installation without having to disconnect the TV signal.
Applications
Large-scale digital and analogue MATV installations which are affected by the transmission of LTE700 and LTE800 mobile telephone signals. Suitable for installations where the channels of each band are received at similar levels. Adjustment by means of switches and regulators which control the gain at each input.
Characteristics
Made from zamak and galvanised steel plate to provide maximum shielding. Input and output connectors in the opposite sides to facilitate installation. F-type connectors.
Downloads
Technical specification
Technical specification
Manuals
CA-662 Manual pdf 1.3 MB
Catalogues
CATALOGUE_ALCAD_EN_MULTIMEDIA_TV pdf 5.42 MB
Certificates
CE Declaration – CA-661-662-663 20210716 pdf 70.79 KB
Flyers
EVEREST flyer pdf 578.79 KB
Technical specifications
-
Alcad CA-663 Ampli 3xuhf-biii-bi/fm lte700 everest
KSh31,212.00Add to cartAlcad CA-663 – Serie 904: Ampli 3xuhf-biii-bi/fm lte700 everest.
Broadband amplifier for head-end, with five inputs and different frequency configurations, compatible with the transmission of LTE700 and LTE800 mobile telephone signals. The built-in power supply unit can feed a preamplifiers by means of a switch. Optional external power supply for redundant power. Output test-point to adjust the installation without having to disconnect the TV signal.
Applications
Large-scale digital and analogue MATV installations which are affected by the transmission of LTE700 and LTE800 mobile telephone signals. Suitable for installations where the channels of each band are received at similar levels. Adjustment by means of switches and regulators which control the gain at each input.
Characteristics
Made from zamak and galvanised steel plate to provide maximum shielding. Input and output connectors in the opposite sides to facilitate installation. F-type connectors.
Downloads
Technical specification
Technical specification
Manuals
Manual pdf 1.3 MB
Catalogues
CATALOGUE_ALCAD_EN_MULTIMEDIA_TV pdf 5.42 MB
Certificates
CE Declaration – CA-661-662-663 20210716 pdf 70.79 KB
Technical specifications
-
Alcad CA-671 Everest sat-uhf-biii-bi/fm lte700
KSh32,084.00Add to cartAlcad CA-671 – Serie 904: Everest sat-uhf-biii-bi/fm lte700 .
Broadband amplifier for head-end, with four inputs and different frequency configurations, compatible with the transmission of LTE700 and LTE800 mobile telephone signals. Satellite amplifier for one polarity. Separate power supply. UHF Band preamplifiers can be fed means of a switch. Output test-point to adjust the installation without having to disconnect the TV signal.
Applications
Large-scale digital and analogue SMATV installations which are affected by the transmission of LTE700 and LTE800 mobile telephone signals. Suitable for installations where the channels of each band are received at similar levels. Adjustment by means of switches and regulators which control the gain at each input. Satellite polarity selection by means of switches that select voltage and 22 kHz tone.
Characteristics
Made from zamak and galvanised steel plate to provide maximum shielding. Input and output connectors in the opposite sides to facilitate installation. F-type connectors.
Downloads
Technical specification
Technical specification
Manuals
CA-671 Manual pdf 816.87 KB
Catalogues
CATALOGUE_ALCAD_EN_MULTIMEDIA_TV pdf 5.42 MB
Certificates
CE Declaration – CA-671-672 20210716 pdf 70.77 KB
Technical specifications
-
Add to cartAlcad CA-672 – Serie 904: Everest sat-uhf-uhf-biii-bi/fm lte700 .
Broadband amplifier for head-end, with four inputs and different frequency configurations, compatible with the transmission of LTE700 et LTE800 mobile telephone signals. Satellite amplifier for one polarity. Separate power supply. UHF Band preamplifiers can be fed means of a switch. Output test-point to adjust the installation without having to disconnect the TV signal.
Applications
Large-scale digital and analogue SMATV installations which are affected by the transmission of LTE700 et LTE800 mobile telephone signals. Suitable for installations where the channels of each band are received at similar levels. Adjustment by means of switches and regulators which control the gain at each input. Satellite polarity selection by means of switches that select voltage and 22 kHz tone.
Characteristics
Made from zamak and galvanised steel plate to provide maximum shielding. Input and output connectors in the opposite sides to facilitate installation. F-type connectors.
Downloads
Technical specification
Technical specification
Manuals
CA-672 Manual pdf 816.87 KB
Catalogues
CATALOGUE_ALCAD_EN_MULTIMEDIA_TV pdf 5.42 MB
Certificates
CE Declaration – CA-671-672 20210716 pdf 70.77 KB
Technical specifications
-
Alcad CA-730 Amplifier if universal
KSh22,648.00Add to cartAlcad CA-730 – Serie 904: Amplifier if universal.
IF satellite broadband amplifier for head-end. It has a voltage switch and 22 KHz tone in order to select the polarity of an individual LNB. The built-in power supply unit has the capacity to feed the LNB. A terrestrial TV input permits the multiplexing of terrestrial and satellite TV bands.
Applications
Designed for medium to large analogue and digital SMATV installations. Used as a head-end amplifier for bouquets which have all their transponders in a single polarity. Adjusted by means of a gain controller and a variable slope control.
Characteristics
Made from zamak and galvanised plate for maximum shielding. Separate housings for the power supply unit and the high frequency circuit. Input and output connectors on the base to facilitate installation.
Downloads
Technical specification
Technical specification
Manuals
– pdf 188.97 KB
CA-730 Manual pdf 690.08 KB
Catalogues
CATALOGUE_ALCAD_EN_MULTIMEDIA_TV pdf 5.42 MB
Certificates
CE Declaration – CA-730 20210716 pdf 70.62 KB
Technical specifications
-
Alcad CA-770 Amp tv-sat if-3xuhf-biii/dab-bi/fm lte7
KSh69,700.00Add to cartAlcad CA-770 – Serie 904: Amp tv-sat if-3xuhf-biii/dab-bi/fm lte7.
TV-SAT broadband head-end amplifier with several inputs compatible with the transmission of LTE700 and LTE800 mobile telephone signals. They independently amplify the terrestrial TV and satellite IF bands and distribute both bands through the output. It has a voltage switch and 22 KHz tone in order to select the polarity of an individual LNB. The built-in power supply unit can feed up to five preamplifiers and a LNB automatically.
Applications
Designed for medium to large analogue and digital SMATV installations which are affected by the transmission of LTE700 and LTE800 mobile telephone signals. Used as a single piece of equipment to treat all terrestrial and satellite TV signals, greatly simplifying the installation. Adjusted by means of a gain controller for each terrestrial/SAT input and a variable slope control for SAT.
Characteristics
Made from zamak and galvanised plate for maximum shielding. Separate housings for the power supply unit and the high frequency circuit. F-type connectors, located on the lower part to make installation easier.
Downloads
Technical specification
Technical specification
Manuals
CA-770 Manual pdf 382.63 KB
HN CA-770 pdf 855.71 KB
Catalogues
CATALOGUE_ALCAD_EN_MULTIMEDIA_TV pdf 5.42 MB
Certificates
CE Declaration – CA-770 20210716 pdf 70.73 KB
Technical specifications
-
Add to cartAlcad CM-004 – Serie 912: Male f connector coax. ? 6.5 – 6.8 mm.
Shielded male F connector to screw onto shielded RG-6 coaxial cable of ? 6.5mm to ? 6.8mm
Downloads
Technical specification
Technical specification
Manuals
– pdf 85.49 KB
Catalogues
CATALOGUE_ALCAD_EN_MULTIMEDIA_TV pdf 5.42 MB
Technical specifications
-
Add to cartAlcad CME-020 – Serie 974: 86×86 ipal standard flush box.
Standard embedding box for Ipal monitors, customized to facilitate the attachment and connections of the monitors on the wall.
Downloads
Technical specification
Technical specification
Catalogues
CATALOGUE_ALCAD_EN_DES pdf 5.85 MB
-
Alcad CMO-703 Ipal flush box for pdk-20003
KSh2,832.00Add to cartAlcad CMO-703 – Serie 974: Ipal flush box for pdk-20003.
To embed an entrance panel to the wall, it is necessary to previously place a flush-mount box where we will later fix the plate. This box is made of aluminum. It has some plates that allow to hold the entrance panel during installation, thus facilitating the work of connection and start-up of the different elements of the system.
Downloads
Technical specification
Technical specification
Catalogues
CATALOGUE_ALCAD_EN_DES pdf 5.85 MB
-
Alcad CP-126 Open-backed cabinet psu and 12 mod
KSh20,446.00Add to cartAlcad CP-126 – Serie 905: Open-backed cabinet psu and 12 mod.
Metallic cabinet without back and with cover with key. Permits the installation of equipment with a power supply unit and 12 modules. The SP-126 support frame is not included.
Downloads
Technical specification
Technical specification
Manuals
– pdf 514.48 KB
Catalogues
CATALOGUE_ALCAD_EN_MULTIMEDIA_TV pdf 5.42 MB
-
Alcad CP-226 Cabinet for sp-24 or sp-226
KSh34,372.00Add to cartAlcad CP-226 – Serie 912: Cabinet for sp-24 or sp-226.
Metal cabinet with cover with key but without back. For the installation of equipment comprising a power supply unit, amplifier and 10 modules or power supply unit and 11 modules. Also it is possible to assemble equipment with 2 power supply units , an amplifier and 8 modules, or 2 power supply units and 9 modules. The SP-226 support frame is not included. VE-500 ventilator available as an option.
Downloads
Technical specification
Technical specification
Manuals
– pdf 1.28 MB
Catalogues
CATALOGUE_ALCAD_EN_MULTIMEDIA_TV pdf 5.42 MB
Technical specifications
-
Alcad CP-900 Cam lock for alcad cabinets
KSh3,376.00Add to cartAlcad CP-900 – Serie 905: Cam lock for alcad cabinets.
Lock for ALCAD boxes of the series 905-CP and 912-CP
Downloads
Technical specification
Technical specification
Catalogues
CATALOGUE_ALCAD_EN_MULTIMEDIA_TV pdf 5.42 MB
-
Alcad DA-520 Distribution amplifier double tv/sat
KSh54,572.00Add to cartAlcad DA-520 – Serie 904: Distribution amplifier double tv/sat.
Broadband distribution amplifier for terrestrial TV and satellite IF. One part of the amplifier amplifies the IF ignal while rejecting the TV signals. The other part of the amplifier amplifies the TV and IF signals, distributing the TV signal to the two outputs. Includes a gain control on each TV and SAT band, a variable equaliser on the TV band and a switchable equaliser on the SAT band. Fed by a built-in switching power supply.
Applications
Designed for SMATV installations with double coaxial cable for distribution. The installation is made with a single amplifier for the two distribution cables.
Characteristics
Made from zamak and galvanised plate for maximum shielding. Separate housings for the power supply unit and the high frequency circuit. F-type connectors, located on the lower part to make installation easier.
Downloads
Technical specification
Technical specification
Manuals
DA-520 Manual pdf 239.14 KB
2632101.03.pdf pdf 207.4 KB
Catalogues
CATALOGUE_ALCAD_EN_MULTIMEDIA_TV pdf 5.42 MB
Certificates
CE Declaration – DA-520 20210716 pdf 70.6 KB
Technical specifications
-
Alcad DA-601 Distribution amplifier tv (vr 30 mhz)
KSh29,018.00Add to cartAlcad DA-601 – Serie 904: Distribution amplifier tv (vr 30 mhz).
Broadband distribution amplifier for terrestrial TV (117 dBuV). It has a gain control and variable slope control. It amplifies the return path from 5 to 30 MHz. Fed by a external power supply model FF-200 (included with the amplifier). The input and output test points permit checking and adjusting the installation with no need to disconnect the TV signal.
It can be used as a distribution amplifier in large installations or cable networks. It can also be used as a line amplifier in small cable networks. These installations usually have long runs of cable that attenuate and unbalance the signal, with higher frequency channels being more attenuated. Distribution amplifiers compensate this loss by mens of the slope control, while amplifying the signal and adding as little noise as possible.
Made from zamak and galvanised steel plates to provide maximum shielding. Input and output connectors on opposite sides to facilitate installation. F-type connectors.
Downloads
Technical specification
Technical specification
Manuals
DA-601 Manual pdf 782.2 KB
Catalogues
CATALOGUE_ALCAD_EN_MULTIMEDIA_TV pdf 5.42 MB
Certificates
CE Declaration – DA-601 pdf 68.47 KB
Technical specifications
-
Alcad DA-603 Distribution amplifier tv (vr 65 mhz)
KSh29,018.00Add to cartAlcad DA-603 – Serie 904: Distribution amplifier tv (vr 65 mhz).
Broadband distribution amplifier for terrestrial TV (117 dBuV). It has a gain control and variable slope control. It amplifies the return path from 5 to 65 MHz. Fed by a external power supply model FF-200 (included with the amplifier). The input and output test points permit checking and adjusting the installation with no need to disconnect the TV signal.
It can be used as a distribution amplifier in large installations or cable networks. It can also be used as a line amplifier in small cable networks. These installations usually have long runs of cable that attenuate and unbalance the signal, with higher frequency channels being more attenuated. Distribution amplifiers compensate this loss by mens of the slope control, while amplifying the signal and adding as little noise as possible.
Made from zamak and galvanised steel plates to provide maximum shielding. Input and output connectors on opposite sides to facilitate installation. F-type connectors.
Downloads
Technical specification
Technical specification
Manuals
DA-603 Manual pdf 782.2 KB
Catalogues
CATALOGUE_ALCAD_EN_MULTIMEDIA_TV pdf 5.42 MB
Certificates
CE Declaration – DA-603 pdf 68.47 KB
Technical specifications
Popular Products
-
Dual Monitor Arm for 13-32 inch Screens up to 19.8 lbs Each - Monitor Mounts for 2 Monitors - Dual Computer Monitor Stand for Desk VESA 75x75 100x100 Adjustable Gas Spring Desk Mount Black
-
Dual Monitor Arm White for 13-32 inch Screens up to 19.8 lbs Each - Monitor Mounts for 2 Monitors - Dual Computer Monitor Stand for Desk VESA 75x75 100x100 Adjustable Gas Spring Desk Mount
-
Single Monitor Desk Mount for 13-34 inch Flat/Curved Screens up to 26.5 lbs - Adjustable Monitor Stand Full Motion Gas Spring Monitor Arm Single Monitor Mount Ultrawide Monitor Arm Black
-
ONKRON Dual Monitor Arm Desk Mount for Two 13-32 Inch Monitors up to 19 lbs Each - Gas Spring Monitor Arm Mount, VESA 75x75-100x100, Dual Monitor Stand for Desk/Dual Monitor Mount Desk Black
-
ONKRON Mobile TV Stand with Wheels Rolling TV Stand for 40-80 Inch LED LCD Flat or Curved Screen TVs up to 122 lbs - Height Adjustable TV Cart with Shelves - Portable TV Stand (TS2771) Black
Products
-
Dual Monitor Arm for 13-32 inch Screens up to 19.8 lbs Each - Monitor Mounts for 2 Monitors - Dual Computer Monitor Stand for Desk VESA 75x75 100x100 Adjustable Gas Spring Desk Mount Black
-
Dual Monitor Arm White for 13-32 inch Screens up to 19.8 lbs Each - Monitor Mounts for 2 Monitors - Dual Computer Monitor Stand for Desk VESA 75x75 100x100 Adjustable Gas Spring Desk Mount
-
Single Monitor Desk Mount for 13-34 inch Flat/Curved Screens up to 26.5 lbs - Adjustable Monitor Stand Full Motion Gas Spring Monitor Arm Single Monitor Mount Ultrawide Monitor Arm Black
-
ONKRON Dual Monitor Arm Desk Mount for Two 13-32 Inch Monitors up to 19 lbs Each - Gas Spring Monitor Arm Mount, VESA 75x75-100x100, Dual Monitor Stand for Desk/Dual Monitor Mount Desk Black
-
ONKRON Mobile TV Stand with Wheels Rolling TV Stand for 40-80 Inch LED LCD Flat or Curved Screen TVs up to 122 lbs - Height Adjustable TV Cart with Shelves - Portable TV Stand (TS2771) Black