Category: Amplification
Amplification
Showing 121–154 of 154 results
-
Alcad ZG-414 Four channel amplifier uhf, 53 db
KSh21,252.00Add to cartAlcad ZG-414 – Serie 905: Four channel amplifier uhf, g=53 db.
Multichannel amplifier for the UHF band designed to work with a group of adjacent channels. Each module permits the amplification and equalisation of two to four channels. The level of the group of channels can be adjusted but not each channel independently. High gain and output level. The initial channel of the group should be specified in the order.
Applications
Large digital and analogue terrestrial MATV installations where adjacent analogue or digital channels exist. Recommended for use in areas of reception where the relation in levels between analogue and digital channels is constant. Normally used to amplify one analogue channel along with several digital channels.
Characteristics
Each module consists of a three-stage input filter, an amplifier and an output filter which is three-stage, the filters are cavities. Filters remain highly stable with variations in temperature. Attenuator using an active MOSMIC regulator reduces the noise figure. 30dB multiturn attenuator. Switch to supply power to preamplifiers with protection against short circuits.
Downloads
Technical specification
Technical specification
Manuals
– pdf 204.95 KB
Catalogues
CATALOGUE_ALCAD_EN_MULTIMEDIA_TV pdf 5.42 MB
Certificates
CE Declaration ZG-414 pdf 48.63 KB
Technical specifications
-
Alcad ZG-421 Ampli uhf adjacent 50db
KSh20,354.00Add to cartAlcad ZG-421 – Serie 905: Ampli uhf adjacent g=50db.
Monochannel amplifier for the UHF band designed to work with adjacent channels. It has a high selectivity which permits the independent equalisation of each adjacent channel. High gain and output level. The channel should be specified in the order.
Applications
Large, digital and analogue terrestrial MATV installations where adjacent analogue or digital channels exist. The different channels can be treated independently with this module which results in a perfect equalisation of all the received channels.
Characteristics
Specific design for adjacent channels, an optimum compromise between image and sound quality and equalisation capability can be achieved due to the high selectivity of the equipment. Each module consists of 3 input filters, amplifier and 2 output filters ? all the filters are cavities. There is an attenuator between stages to reduce the noise figure. Supplied with the multiplexing and diplexing bridges and power cable.
Downloads
Technical specification
Technical specification
Manuals
– pdf 165.67 KB
Catalogues
CATALOGUE_ALCAD_EN_MULTIMEDIA_TV pdf 5.42 MB
Certificates
CE Declaration ZG-421 pdf 48.63 KB
-
Alcad ZG-431 Single channel adjacent amp. uhf, 52db
KSh19,956.00Add to cartAlcad ZG-431 – Serie 905: Single channel adjacent amp. uhf, g=52db.
Monochannel amplifier for the UHF band designed to work with adjacent channels. It has a high gain and output level. The channel should be specified in the order.
Applications
Large, digital and analogue terrestrial MATV installations where adjacent analogue or digital channels exist. The different channels can be treated independently with this module, which results in a perfect equalisation of all the received channels.
Characteristics
Each module consists of a three-stage input filter, an amplifier and an output filter which is three-stage, the filters are cavities. Filters remain highly stable with variations in temperature. Attenuator using an active MOSMIC regulator reduces the noise figure. 30dB multiturn attenuator. Switch to supply power to preamplifiers with protection against short circuits.
Downloads
Technical specification
Technical specification
Manuals
– pdf 201.67 KB
Catalogues
CATALOGUE_ALCAD_EN_MULTIMEDIA_TV pdf 5.42 MB
Certificates
CE Declaration ZG-431 pdf 48.63 KB
Technical specifications
-
Alcad ZG-611 Ampli bi,biii interbands, 52 db
KSh15,982.00Add to cartAlcad ZG-611 – Serie 905: Ampli bi,biii interbands, g=52 db.
Analogue FM and DAB radio broadband amplifier which amplifies the entire FM or DAB radio band. Amplifies the whole FM or DAB radio band. High gain and output level. The ZG-611 amplifier amplifies the DAB digital radio by groups of channels (which should be specified when ordering). The FM amplifier is also available for OIRT frequencies (when ordering model ZG-611, please specify FM OIRT if required).
Applications
MATV installations that include FM or DAB radio distribution.
Characteristics
This module is compatible with other equipment for TV in the 905- ZG range. It allows distribution of FM and DAB radio and of television signals to be combined using a single piece of equipment. Attenuator by means of active MOSMIC regulator to reduce the noise figure. 30dB multiturn attenuator. Switch to supply power to preamplifiers with protection against short circuits.
Downloads
Technical specification
Technical specification
Manuals
– pdf 201.67 KB
Catalogues
CATALOGUE_ALCAD_EN_MULTIMEDIA_TV pdf 5.42 MB
Certificates
CE Declaration – ZG-611 pdf 68.66 KB
Technical specifications
-
Alcad ZP-002 Plug bridge
KSh1,028.00Add to cartAlcad ZP-002 – Serie 905: Plug bridge.
Multiplexing bridge, to combine the signal of all the modules.
Downloads
Technical specification
Technical specification
Catalogues
CATALOGUE_ALCAD_EN_MULTIMEDIA_TV pdf 5.42 MB
-
-
Add to cart
High gain mast amplifier (LTE700, 2nd Digital Dividend). 1 input: FM/BIII/DAB/UHF. Mast-mounted amplifier to amplify terrestrial television signals from an antenna. It consists of a single input with amplification in several bands. The amplifier is powered at 24Vdc through the output coaxial cable.
-
Add to cart
High gain mast amplifier (LTE700, 2nd Digital Dividend). 3 inputs: FM-BIII/DAB-UHF. Mast-mounted amplifier to amplify terrestrial television signals from various antennas. It consists of 3 inputs with amplification in all bands. The amplifier is powered at 24Vdc through the output coaxial cable.
-
Add to cart
High gain mast amplifier (LTE700, 2nd Digital Dividend). 4 inputs: FM-BIII/DAB-UHF-UHF. Mast-mounted amplifier to amplify terrestrial television signals from various antennas. It consists of 4 inputs with amplification in all bands. The amplifier is powered at 24Vdc through the output coaxial cable.
-
IFS 247 (FI) LTE 700 SAT-TER Triax Amplifier
KSh7,826.00Add to cartAmplifier 1 input – 2 outputs
Input frequency 5 … 2150 MHz
Output 1 gain = 25dB Sat / 20 Terr.
Output 2 gain = 17dB Sat. / 12dB Terr)
Output level 114 dB?V.,
Current flow in FI., Independent regulation of the output level in RF and FI
-
Johansson 1352 Mixer 3 inputs
KSh2,532.00 -
Add to cart
LTE 700 (4G) filter: 30dB rejection of UHF channels 50-69 (indoor) 5-694 MHz
Features
30 dB LTE rejection
in-line small housing
indoor use
Specifications
Reference 6023C48
Frequency range MHz 5-694
Cut off channel – 48
Insertion loss dB 1
LTE (4G) rejection CH50 – 69 dB 30
GSM rejection dB 25
DC power pass mA 500
Connectors – 2 x F female
Mounting – Indoor Use
Dimensions mm 72 x 22 x 17 -
Add to cart
LTE_694 (4G-5G) filter: 40dB rejection of UHF channels 50-69 (indoor and outdoor) 5-694 MHz
Features
High LTE (4G/5G) rejection
Idoor and outdoor mountable
Specifications?
? ? 6024C48
Frequency range MHz 5-694
Cut off channel – 48
Insertion loss dB 2.5
LTE rejection (4G) dB 40
GSM rejection dB 15
DC power pass mA 500
Connectors ? 2 x F female
Mounting ? Indoor / outdoor use (indoor flange provided)
Dimensions mm 112 x 98 x 56
? -
Add to cart
This model replaces the Johansson 7322
Mast Amplifier UHF 25dB LTE2 (5G)
Characteristics
1 input / 1 output
Frequency range: 470 ..694MHz (C21 ..C48)
LTE rejection (5G)
Ultra low noise
Gain: 10-25 dB (adjustable)
High selectivity
Built-in GSM trap
Power indicator LED
Pole or wall mount
Specifications
7322L2
Frequency range MHz 470 – 694 (ch. 21-48)
Gain dB 10-25 adj
Noise figure dB 2.0
Max. input level dB?V 80
Max. output level dB?V 100
Power supply VDC 24
Consumption mA 35
Dimensions mm 120 x 115 x 50 -
Add to cart
UHF Preamplifier (LTE/5G): 35dB 24V
Features
1 input/1 output
LTE (5G) rejection
low-noise
15-35 dB adjustable gain
power indication LED
24 VDC operating voltage
Specifications
? ? 7329
Frequency range MHz 470-694 (Ch. 21-48)
Gain dB 15 – 35
Noise figure dB 3.5
Input level dB?V 82
Output level dB?V 104
Power supply VDC 24
Consumption mA 35
Dimensions mm 120 x 115 x 50 -
Johansson 9506 Mixer 1e+Sat Ext
KSh2,398.00 -
-
-
Add to cart
Mast Amplifier Kit 7329 + Power Supply 2436.
Features
7329 Mast Amplifier Kit
1 input / 1 output
5G LTE rejection
Low noise
Adjustable gain 15 – 35 dB
LED power indicator
Working voltage 24 VDC
Power Supply 2436
Entries: 1
Outputs: 2
Insertion loss dB 4-5
Isolation between outputs dB 10
Input voltage/Frequency/Consumption – 100-230 V~ / 50 Hz / 4.6 W
Efficiency level – VI
Output voltage VDC 24
Output current mA 150
Dimensions mm 95 x 76 x 35
Specifications
Preamplifier
7329
Frequency range MHz 470-694 (Ch. 21-48)
Gain dB 15 – 35
noise figure dB 3.5
Input level dB?V 82
Output level dB?V 104
power supply VDC 24
Consumption mA 35
Dimensions mm 120x115x50
Power supply
2436
Outputs – 2
Insertion loss dB 4-5
Isolation between outputs dB 10
AC input voltage/Frequency/Power – 100-230 V~ / 50 Hz / 4.8 W
Efficiency level – SAW
DC output voltage VDC 24
Output current mA 150
Dimensions mm 95x76x35 -
Line amplifier 1in/1out UHF/FI 2,5/20dB + DC Televes
KSh11,510.00Add to cartThey are fed through the coaxial cable from the receiver or by a power injector. Zamak chassis. Connection “F”.
-
Add to cart
Mast installation amplifier to amplify terrestrial television signals from various antennas. It consists of 2 inputs with amplification in all bands. The amplifier is powered at 12Vdc through the output coaxial cable. NETWORK compliant.
-
Add to cart
Mast installation amplifier to amplify terrestrial television signals from various antennas. It has 3 inputs with amplification in all bands. The amplifier is powered at 12Vdc through the output coaxial cable. NETWORK compliant.
-
Mixer-Spliter 2FI-2D ICT Televes 740710
KSh10,026.00Add to cartAre housed in a die-cast chassis with ?F? connectors; Allow the passage of current from the SAT IF output to the input; The 7452 reference may also be used as a filter for GSM telephony, thanks to its high rejection TV-IF; Mast mounting for ref. 7452 using the outdoor case ref. 4163; ?F? Connection.
-
Add to cart
Modular amplifier that allows independent adjustment of the signal received in the DAB or FM band. Both signals are mixed in Z at their output, for compatibility with the rest of the modules in the range. Its format is ideal for mounting in headends, with more amplifiers of the T12 series.
-
-
Add to cart
The market’s most sophisticated single-channel / multichannel amplifiers. Modular and expandable system. High reliability, thanks to its fully robotized manufacturing. Considerable improvement in the shield design. Possibility of feeding up to 24 modules through its switching power supply ref.549812. Configurable power preamplifiers via ON / OFF switch. Gain control. Total backward compatibility. Include?necessary elements for …
Single-channel amplifier T.12 FI 950..2150MHz 35..50dB TelevesRead More
-
Add to cart
The market’s most sophisticated single-channel / multichannel amplifiers. Modular and expandable system. High reliability, thanks to its fully robotized manufacturing. Considerable improvement in the shield design. Possibility of feeding up to 24 modules through its switching power supply ref.549812. Configurable power preamplifiers via ON / OFF switch. Gain control. Total backward compatibility. Include?necessary elements for …
Single-channel amplifier T.12 FM BIII 174…230MHz 45dB TelevesRead More
-
Add to cart
Fuente de alimentaci?n conmutada 24V 2.5A?Televes montada en ch?sis universal T.12. Dispone de una salida estabilizada para alimentar cualquier equipo con formato T.12.?
-
Add to cart
Module that amplifies the optical signal of 1550nm, generating an output power of 19dBm. Equipped with WDM, it has 1 input of 1310/1490nm with which it multiplexes the 1550nm amplified signal, offering 1 output 1310/1490/1550nm, for use in a GPON header (usually with an OLT512). Televes 234221
-
Add to cart
Modular amplifier allowing the adjustment of individual UHF channels (DTT), with very high rejection of adjacent channels (>50 dB). 470-862MHz G55dB Vs125dB?V.?Perfect format for headend mounting, with additional T12-series amplifiers.?Televes 509812
-
Triax MFC 104 – UHF/BIII/AM/FM combiner
KSh2,784.00Add to cartMFC 104 – AM/FM/TV combiner. With F-connector for any job. Unique mounting system. Switchable DC-through power. RF shielded.
Specifications
ORDER INFORMATION
EAN Number 5702663401044
CHARACTERISTICS
Type Combiner
FREQUENCY
Input 1 – band UHF
Input 1 – channels 21…69
Input 1 – frequency 470…862 MHz
Input 2 – band VHF
Input 2 – channels 5…12
Input 2 – frequency 175…230 MHz
Input 3 – band AM/FM
Input 3 – channels 1…4
Input 3 – frequency 0.15…108 MHz
LOSS
Input 1 – through loss 2.0 dB
Input 1 – Stop Band Attenuation 20 dB
Input 2 – through loss 1.5 dB
Input 2 – Stop Band Attenuation 20 dB
Input 3 – through loss 1.0 dB
OPERATIONAL
DC Passthrough Yes UHF
CONNECTORS
Connector Type F-female
Number of inputs 3
Number of outputs 1
MECHANICAL
Product Height 117 mm
Product Depth 50 mm
Product Width 120 mm
Colour RAL 7016 – Anthracite grey
Packaging Height 0.001 m
Packaging Width 0.001 m
Packaging Depth 0.001 m
Net Weight 0.237 kg
Total Weight 0.237 kg
Remarks DC throughpower UHF input -
-
Unix XF32 E UHF Antenna
KSh7,188.00Add to cartSpecifications
channels ? 21-69
bandwidth ? BIV/V
elements ? 32
gain dB 12,5
front/back ratio dB 24
horizontal beamwidth ? ? 20
windload N 58
weight Kg 1.45
material ? aluminum
dimensions mm 791×500
connector ? Tipo F