Welcome to Alcatraz Dish Network Services!
SUPPORT 24/7/365!? +254720548999
SUPPORT 24/7/365!? +254720548999

Category: Digital Headends

Digital Headends

Showing all 48 results

  • Configuration service + Router Device. GPON Infraestructures. Latest generation router and configuration service adapted to each network infraestructure on demand.

    Add to cart
  • The VOD 20 Streams 1TB server is a high performance, flexible, scalable and reliable device that enables the ingest of video streams to the network providing applications such as VOD, PVR and corporate content on demand. Thanks to its scalability, it allows to design a VOD distribution platform according to the characteristics of the network and the number of users. Televes 830311

    Add to cart
  • The VOD 95 Streams?1TB (2.4TB) SAS server is a high performance, flexible, scalable and reliable device that enables the ingest of video streams to the network providing applications such as VOD, PVR and corporate content. Thanks to its scalability, it allows to design a VOD distribution platform according to the characteristics of the network and the number of users. Televes 83031201

    Add to cart
  • Equipped with CI. The transmodulator receives a SAT transponder in DVBS (QPSK) or DVBS2 (QPSK /8PSK) modulation and demodulates it, producing an MPEG-2 transport packet. The MPEG2 transport packet is subsequently modulated in COFDM and converted into the output channel (UHF or VHF, with a 7/8 MHz bandwidth), using an agile up-converter. Televes 563301

    Add to cart
  • The content generated consists of up to four services since it has four analog composite video inputs (CVBS). They generate DVBT, DVBC (QAM Annex A) or ITUJ83 (QAM Annex B) output. These modules can encode the video in MPEG-2 format or in H.264 (HDTV). Televes 563822

    Add to cart
  • The generated content consists of two services; each of them can come from up to three types of input format (HDMI, YPbPr components or CVBS composite video). They generate DVBT, DVBC (QAM Annex A) or ITUJ83 (QAM Annex B) output. These modules can encode the video in MPEG-2 format or in H.264 (HDTV). Televes 563832

    Add to cart
  • Device that has two modes of operation: as an AV -IP/RF Encoder in which it converts Audio / Video signals to an IP stream as well as an RF multiple (DVB-T or DVB-C), and as an AV Encoder / IP – RF where it converts Audio / Video signals and IP streaming services into an RF multiple (DVB-T or DVB-C). Televes 563852

    Add to cart
  • Fiber optic receiver T.0X series SC / APC S / RET. High energy efficiency High power optical emitter (4mW). Multi-window receiver (1200 – 1600nm). Receiver with high RF output power (114dB?V in MATV and 117dB?V in FI).

    Add to cart
  • IKUSI ADA-HTI. Special bridges kit to install ClassA modules in HTI BACK-500 base

    Features
    Special bridges kit to install ClassA modules in HTI BACK-500 base

    ?

    MANUAL/DATASHEET

    Add to cart
  • IKUSI BACK-500. Base-plate for HTI Headend. The BACK-500 base-plate allows to fix mechanically the HTI product range modules, to distribute the supply lines and to communicate the different modules that are inserted in the headend.

    Features
    The base-plate is formed by two parts:
    1. Backplane
    2. USB bridge
    The backplane is in charge of fixing the modules, distributing the power supply and carrying the communication lines towards the USB bridge.
    The USB bridge in in charge of connection all the modules that are inserted in the base-plate?with the master module.
    Interconnected base-plate, does not need alimentation bridges between modules.
    The base-plate can be fixed to the wall or in a rack frame by means SR-HTI of fixing accessories (joining 2 base-plates.
    Technical specifications
    REF. 3866
    Number of solts 5
    Connectors type PCIe
    Dimensions 210 x 257 x 24 mm
    Packaged weight 1 kg

    ?

    MANUAL/DATASHEET

    Add to cart
  • IKUSI COR-150. Accessories for HTI Headend. COR-150. Schuko network cable.

    Features
    Accessories for HTI Headend. COR-150.
    Schuko network cable.
    1.8m

    ?

    MANUAL/DATASHEET

    Add to cart
  • IKUSI HTA-125. Power amplifier. Amplification of the signal generated by a headend of HTI modules.

    Features
    Amplification of RF signals of HTI headends.
    Variable attenuation is shared on two interstage sections, featuring delayed behaviour on the first one. Maintenance of a low noise figure.
    Extension input allows coupling of the wideband signal provided by another existing headend.
    Technical specifications
    REF. 3868
    Bandwidth MHz 47 – 862
    Gain dB 45
    Interstage variable attenuator dB 0 – 20
    Noise figure dB ? 6
    Output level (IMD3 -60dB, DIN 45004B) dB ? 125
    Output level (IMD2 -60dB, EN 50083-3) dB?V ? 120
    Input test dB?V -20 ?1.5
    Output test dB -30 ?1
    Extension input Bandwidth MHz 47 – 862
    Gain dB 6
    Supply voltage VDC +24
    Consumption mA 450
    Operating temperature ?C -10… +45
    RF and Test connectors ? Female F
    Dimensions mm 230 x 195 x 32

    ?

    MANUAL/DATASHEET

    Add to cart
  • IKUSI HTI-424. DVB-T/T2/S/S2/C to DVB-T/C, IPTV Transmodulator. It receives contents from 4 DVB-T/T2, DVB-S/S2 or DVB-C transponders/muxes, decrypts and broadcasts them in 4 DVB-T or DVB-C or on IPTV output channels.

    Features
    Versatile transmodulation of DVB-T/T2, DVB-S/S2 and DVB-C channels to DVB-T/DVB-C channels.
    The HTI-424 module can receive 4 DVB-T/T2, DVB-S/S2 or DVB-C muxes and broadcasts them in 4 DVB-T or DVB-C or on IPTV output channels.
    One module acts as the ?master? to ensure the configuration (remote or local through PC) is carried out at the complete headend level, through the IKUNET bus and not module by module.
    It allows a future increase in services to be foreseen in order for the televisions to have them already on their lists, avoiding the need for retuning.
    It has two Common Interface slots (EN 50221) for discretional decryption of programmes in accordance with the inserted CAM module.
    It allows a video service to be sent with several different languages without taking up more space than that corresponding to an RF channel. The television shows ?a programme? for each language, avoiding the need for users to have to choose their ?language? on the television remote control.
    It is compatible with the PC application: ?IKUSI HEADEND DISCOVERY? This instrument provides installers with a tool that allows them to detect the headend?s modules without having to modify the PC?s network configuration. (This can be downloaded from www.ikusi.tv).
    It allows channel lineups to be created and managed remotely, ensuring that the lineup is completely customisable without having to work in-situ.
    The four DVB-T/C output channels can be distributed onto any part of the band.
    Total control of the multiswitch. Fitted with DiSEqC.
    USB-300 to Ethernet adapter for local or remote configuration. Also, it cam be done through the Ethernet port.
    Technical specifications
    REF. 3863
    Inputs 4 (or 1+loop through)
    Input frequency range MHz DVB-T/T2 😕 47-862
    DVB-S/S2 😕 950 – 2150
    DVB-C :?????? 47-862
    Input level dB?V 40 – 92
    Symbol rate MS/s DVB-S:????? 1…45
    DVB-S2:??? 1… 45
    DVB-C:????? 1… 6.952
    Maximum input current ? 100mA in 2 and 4 connectors.
    250mA in 1 and 3 connectors
    Fitted with DiSEqC (v. 1.1) ? No limit on number of polarities
    TS Procesing
    PSI/SI adaptation ? Generating and inserting tables PAT, PMT, CAT,
    SDT, BAT, NIT, TDT, TOT, EIT
    NIT adaptation ? Yes (automatically generated)
    SDT adaptation ? Yes (configurable input name)
    LCN, TDT, TOT management ? Yes
    Cloned services ? Yes, from any input to any output
    Number of Common Interface slots ? 2
    RF Output
    Number of outputs ? 4 channels
    DVB-T / DVB-C (47 – 862 MHz)
    MER dB > 40
    Output level dB?V 85
    Maximum output bit rate DVB-T Mbps 31,7
    Operation modes DVB-T ? 2K / 8K
    Output bandwidth DVB-T MHz 6 / 7 / 8
    Modulation formats DVB-C ? 16 QAM / 32 QAM / 64 QAM /128 QAM / 256 QAM
    Maximum output bit rate DVB-C Mbps 53
    Adjustable output level dB -15
    Symbol rate DVB-C MS/s 3 … 7.2
    Output loop-through loss dB 1.1
    IPTV Output
    Number of SPTS outputs ? 64
    Number of MPTS outputs ? 4
    Transmission protocols ? SPTS : UDP and RTP
    MPTS : UDP
    SAP protocol ? Yes
    Interface type ? RJ-45 Gigabit Ethernet
    Output maximun bit rate ? 850 Mbps
    General
    Configuration ? PC. Interface web
    Ikusi Headend Discovery (v1.8.5)
    Management interface ? USB 2.0 Host frontal
    Supply voltage VDC +24
    Operating temperature ?C 0… +45
    Consumption A 1
    Dimensions mm 230 x 195 x 32
    Weight kg 1.165
    Protection index IP IP20

    ?

    MANUAL/DATASHEET

    Add to cart
  • The solution to receive free-to-air channels via satellite (HD or SD) and watch them in DTT format.

    Main features

    An MTI transmodulator carries out the complete channel processing from the input to the output:

    Tunes a xPSK digital channel of the 950-2150 MHz band, demodulates the signal being received
    Processes the transport stream (with programme de-encrypting in the MTI-900, if this one has a ?CAM + Operator Card? couple is installed)
    Re-modulates it in COFDM format on an RF channel that is selectable within the 47-862 MHz frequency range.

    Module programming involves the following selections and settings:

    Central xPSK Input Frequency (1 MHz steps)
    Input Symbol Rate (0.001 MS/s steps)
    Central COFDM Output Frequency (1 kHz steps)
    Output Channel Bandwidth (6, 7 or 8 MHz; also 5 MHz on DVB-H)
    Output Operation Mode (2K or 8K; also 4K on DVB-H)
    RF Output Level
    FFT Window (Fast Fourier Transform), to reduce interference on adjacent channel
    In-depth interleaving (only on DVB-H; with 2K and 4K modes)
    Discretionary de-encrypting of one or more Services (only for MTI-900)
    Optional Blockade of Services, PIDs and Conditional Accesses, with Regeneration of Tables
    NIT Adaptation
    Additional info

    Data Sheet

    Installation Manual

    Programmation guide

    Firmware

    Add to cart
  • IKUSI SR-HTI. Accessories for HTI Headend. SR-HTI. Support to install the headend in a rack 19 ?.

    Features
    Accessories for HTI Headend. SR-HTI. Support to install the headend in a rack 19 ?.
    ?

    ?

    MANUAL/DATASHEET

    Add to cart
  • IKUSI UAH-001. Bridge for connection of two bases BASK-500

    Features
    Bridge for connection of two bases BASK-500

    ?

    MANUAL/DATASHEET

    Add to cart
  • IKUSI USB-300. Accessories for HTI Headend. USB-300. USB-Ethernet adapter for local or remote control.

    Features
    Accessories for HTI Headend. USB-300. USB-Ethernet adapter for local or remote control.
    Specifications
    Conexiones Puerto Ethernet RJ-45 Ethernet (10/100/1000 Mbps) Conector USB Tipo A
    LEDs Velocidad (naranja) Link/ACT (verde)
    Est?ndares Especificaci?n USB Versi?n 3.0 Especificaci?n USB Versi?n 2.0 Especificaci?n USB Versi?n 1.1 Especificaci?n USB Versi?n 1.0
    OHCI (Open Host Controller Interface) EHCI (Enhanced Host Controller Interface) IEEE 802.3 Ethernet
    IEEE 802.3u 100BASE-T, TX, y compatible T4 Soporta modo suspensi?n y arranque remoto
    Soporta full y half duplex en el modo gigabit Ethernet
    DVB-T / DVB-C
    General
    Requisitos del Sistema Sistema Operativo: Microsoft Windows 8/7/Vista/XP SP3 Mac OS 10.6 a 10.8
    Linux kernel 2.6.14x o superior
    Gesti?n de Energ?a La gesti?n avanzada de energ?a reduce el consumo cuando no hay tr?fico o es escaso
    F?sicas
    Alimentaci?n Entrada: Por USB a 500 mA, 5 V DC Consumo: 150 mA, 3.3 V DC
    Temperatura En uso: 0 a 45 ?C (32 a 113 ?F) Almacenado: -20 a 70 ?C (-4 a 158 ?F)
    Humedad En uso: 10? a 90? sin condensaci?n Almacenado: 5? a 90? sin condensaci?n
    Dimensiones 74.4 x 21 x 16 mm (2.93 x 0.83 x .063 pulgadas)
    Peso 46.4 gramos (1.64 onzas)
    Certificaciones CE FCC

    ?

    ?

    ?

    MANUAL/DATASHEET

    Add to cart
  • Johansson Signal Processing Header (6700)

    5 inputs: FM, 4xVHF / UHF
    Gain: 35dB (FM), 45dB (VHF), 70dB (UHF)
    Output level: 131dB
    High Selectivity, CAG
    Channel processor
    Output level: 112 (with 6 MUX)
    You can configure up to 32 filters of 1 or 2 adjacent channels

    Characteristics
    Entry level reading – no need for a network analyzer
    Can process and convert more than 50 channels
    The most selective filters on the market (50 dB in adjacent channels)
    Real-time AGC on all individual multiplexes
    Complete flexibility in assigning filters to any of the inputs
    Made in Europe, for applications around the world
    The Profiler Revolution facilitates easy setup and is the most cost-effective profiler on the market.
    The most cost-effective channel conversion solution on the market, with great flexibility to map any VHF / UHF input to any VHF / UHF output
    Very easy and fast installation, without the need for a field strength meter
    Extremely sharp filters, 50 dB in adjacent channels and integrated 4G / 5G / LTE filters. The Profiler Revolution can filter and amplify very weak signals. This is something that our test users could not do in the past with other equipment.
    A perfect headend for your fiber installation to equalize and optimize signals
    Excellent output signal quality, Profiler Revolution optimizes the incoming terrestrial digital signal to ensure supreme video quality on end users’ TV screens
    Specifications
    Model 6700
    Tickets – 4 VHF / UHF + 1FM
    Departures – 1 main (FM – VHF – UHF) + 1 test port (-30db)
    Frequency range MHz
    MHz
    MHz FM: 88 – 108
    VHF: 174 – 240
    UHF: 470 – 862
    LTE protection MHz Automatic selection: 694, 790 or OFF
    Entry level dB?V
    dB?V
    dB?V FM: 37 – 77
    VHF: 40 * – 109
    UHF: 40 * – 109

    FM output power

    VHF / UHF power output

    VHF / UHF power output

    dB?V
    dB?V
    dB?V
    dB?V 113 (60dB / IM3)
    120 (60dB / IM3)
    131 (35dB / IM3)
    112 (with 6 MUX)
    Conversion – Yes (from any VHF-UHF channel to any VHF-UHF channel)
    Number of channels – > 50
    Add channels – 1 or 2 MUXes per filter
    Gain

    dB

    dB

    dB

    FM: 35

    VHF:> 70

    UHF:> 70

    Gain adjustment: FM VHF / UHF

    dB

    twenty

    CAG channel

    General attenuator dB twenty
    VHF / DAB attenuator dB fifteen
    Slope adjustment dB 9
    Selectivity dB / 1MHz 35
    Output MER

    dB

    dB

    VHF: 35

    UHF: 35

    ESD protection – All entries

    Power supply voltage for preamplifier

    Power supply current

    V

    mA

    12 or 24

    100 (total for 4 entries)

    SD port – Yes (for copying settings and update functions)
    Operating temperature ?C -5 to +50
    Power supply Vac 100 – 240
    Consumption W fifteen
    Dimensions mm 220 x 165 x 55
    Weight kg 0.8

    * For 64 QAM with code rate ?.

    Additional Information

    DOWNLOADS / MANUALS

    Add to cart
  • Johansson Signal Processing Header (6702)

    6 inputs: FM, 4xVHF / UHF, SAT
    Gain: 35dB (FM), 45dB (VHF), 70dB (UHF), 40dB (SAT)
    Output level: 131dB
    High Selectivity, CAG
    Channel processor
    Input level intensity reading:
    (no need for a field strength meter)
    Output level: 110 (with 6 MUX)
    You can configure up to 32 filters of 1 or 2 adjacent channels

    * ref. 6700 similar product

    Characteristics
    Input level intensity reading – no field strength meter required
    It can process more than 50 channels (terrestrial and satellite)
    Can convert a wide selection of terrestrial channels
    The most powerful filters on the market (50 dB in adjacent channels)
    Real-time AGC on all individual multiplexes
    Flexible matrix: complete flexibility in assigning filters from any input
    Made in Europe, for worldwide application
    The Profiler Revolution SAT facilitates easy setup
    RED compliant (selictivity rating 0 – 1 – 2 – 3 – 4)
    Specifications
    Model 6702
    Tickets – 1 SAT + 1 FM + 4 VHF / UHF
    Departures – 1 main (SAT-FM-VHF-UHF) + 1 test port (-30dB)
    Frequency range MHz
    MHz
    MHz
    MHz SAT: 950 – 2400
    FM: 88 – 108
    VHF: 174 – 240
    UHF: 470 – 862
    LTE protection MHz Automatic selection: 694, 790 or OFF
    Entry level dB?V
    dB?V
    dB?V
    dB?V SAT: 40 – 95
    FM: 37 – 77
    VHF: 40 * – 109
    UHF: 40 * – 109
    SAT output power (-35dBc / IM3 2 port) dB?V 119 (-35dBc / IM3 2 carriers)
    FM output power (60dB / IM3) dB?V 113 (60dB / IM3)
    VHF / UHF output power (60dB / IM3) dB?V 120 (60dB / IM3) 131 (35dB / IM3)
    VHF / UHF power output with 1 MUX dB?V 113 (with 1 MUX)
    VHF / UHF power output with 6 MUX dB?V 110 (with 6 MUX)
    Number of channels – > 50
    Add channels – 1 or 2 MUXes per filter
    Conversion – Yes (from any VHF-UHF channel to any VHF-UHF channel)
    Noise figure dB SAT: 8
    General attenuator dB twenty
    Gain dB
    dB
    dB
    dB SAT: 40
    FM: 35
    VHF:> 70
    UHF:> 70
    VHF / DAB attenuator dB fifteen
    Gain adjustment dB
    dB
    dB SAT: 20
    FM: 20
    VHF / UHF: AGC channel
    Slope adjustment dB
    dB SAT: 12
    VHF / UHF: 9
    Selectivity dB
    dB / 1MHz SAT: 40 (@ 862 MHz)
    VHF / UHF: 35

    Return loss

    dB 10
    Output MER dB
    dB VHF: 35
    UHF: 35
    ESD protection – All entries
    DC @ VHF / UHF input V 12 or 24

    DC current

    @ VHF / UHF input

    mA 100 (total for the 4 VHF / UHF inputs)

    DC @ SAT input

    – 13V / 18V / Bypass & 0 / 22kHz selectable by SW

    DC current

    @ SAT entry

    mA 300

    SD port

    – Yes (to copy con guration and update functions)
    Operating temperature ? C -5 to +50
    Power supply
    Energy consumption V
    W 100 – 240
    twenty
    Dimensions mm 217 x 165 x 59
    Weight kg 0.85

    * For 64 QAM with code rate ?.

    Additional Information

    DOWNLOADS / MANUALS

    Add to cart
  • The Johansson Profino Revolution Plus is an easy to use programmable control panel and terrestrial signal converter. The module optimizes VHF / UHF and FM terrestrial signals from various inputs to provide you with high-quality images on your TV. The latest in programmable control panels without equivalent in the market thanks to its revolutionary technology.

    4 inputs: FM, BIII / DAB, 2xUHF
    Gain: 35dB (FM), 35dB (VHF), 70dB (UHF)
    Output level: 105 (with 15 MUX)
    You can configure up to 15 filters from 1 to 6 adjacent channels
    Fine filtering adjustment per channel
    Meets RED standard (European quality standard)
    Characteristics
    Input signal level reading: no field meter required.
    Can process 30 channels
    Can convert a wide selection of channels
    The most selective filters on the market (50 dB to adjacent channels)
    CAG in real time on all individual multiples.
    Total flexibility in assigning filters from any input. Each channel can be changed from frequency to any other in the VHF or UHF band (Flexible Matrix)
    To prevent unauthorized persons from changing the settings, all programmable control panels can be locked by means of a security code.
    Made in Europe, for applications around the world.
    4 inputs: FM / DAB / VHF / 2x UHF / 30 channels (15 filters) / AGC / 12-24 V remote power supply
    Product Dimensions (Height x Width x Depth): 165mm x 217mm x 59mm
    Applications

    The Profino Revolution Plus can be used to provide high-quality television images and FM signals in a wide variety of projects, both in the residential and hospitality markets. Typical buildings or infrastructures where the Profino Revolution Plus can be used include, but are not limited to:

    Large and small hotels, hostels, bed and breakfasts, holiday parks.
    Hospitals, nursing homes, prisons, pensions.
    Large and small residential buildings.
    Package content
    1 x Profino Revolution Plus (ref. 6711)
    1 x Power Cable (180cm)
    Specifications
    Tickets – 1 FM + 1 DAB / VHF + 2 UHF
    Departures – 1 main test port (FM-DAB-VHF-UHF) + 1 (-30dB)
    Frequency range MHz
    MHz
    MHz FM: 88 – 108
    VHF: 174 – 240
    UHF: 470 – 862
    LTE protection megahertz Automatic selection: 694, 790 or OFF
    Entry level dB?V
    dB?V
    dB?V FM: 37 – 77
    VHF: 45 * – 109
    UHF: 45 * – 109
    FM output power dB?V 113 (60dB / IM3)
    VHF / UHF power output

    dB?V

    dB?V

    dB?V

    115 (60dB / IM3) 126 (35dB / IM3)
    108 (with 1 MUX)
    105 (with 15 MUX)

    Number of channels

    Add channels

    30 (15 filters)

    1, 2, 3, 4, 5 or 6 MUXes per filter

    Gain dB
    dB
    dB FM: 35
    VHF:> 60
    UHF:> 60
    Gain adjustment dB
    dB FM: 20
    VHF / UHF: AGC channel
    General attenuator dB twenty
    Slope adjustment dB fifteen
    Selectivity dB / 1MHz fifty
    Return loss dB 10
    Output MER dB
    dB VHF: 35
    UHF: 35
    Conversion – Yes (from any VHF-UHF channel to any other within the same band)
    ESD protection – All entries
    DC @ VHF / UHF input
    DC Current @ VHF / UHF Input V
    mA 12 or 24
    100 (total for the 3 entries)
    SD port – Do not
    Operating temperature ?C -5 to +50
    Power supply
    Energy consumption V
    W 100 – 240
    12
    Dimensions mm 217 x 165 x 59
    Weight kg 0.8

    * For 64QAM with 3/4 code rate

    Additional Information

    DOWNLOADS / MANUALS

    Add to cart
  • Programmable terrestrial filter amplifier: 5 inputs: 1 SAT + 1 FM + 1 DAB/VHF + 2 UHF / >50 Channels (15 filters) / 126dB?V / AGC / 12-24 V remote power.

    The Profino Revolution Plus Sat will boost your business.

    The Profino Revolution Plus SAT is a light version digital Profiler.?

    The 6713 has 1SAT, 1 FM, 1 DAB/VHF and 2 UHF inputs.?

    > 50 Channels can be filtered, amplified and converted.?

    The filters on adjacent channels are extremely sharp.

    The new Johansson Profino Revolution Plus SAT has no equivalent on the market due to its revolutionary technology:?

    Read-out of input level strength: no need for field strength meter?
    Can process up to > 50 channels (Terrestrial and Satellite)
    Sharpest filters on the market (50 dB on adjacent channels)
    Real-time AGC on all individual multiplexes?
    Flex matrix: complete flexibility in assigning filters from any input?
    Made in Europe, for worldwide application?
    The Profino Revolution Plus SAT is really easy to install?
    RED compliant (selectivity classification 0 ? 1 ? 2 ? 3 ? 4)?
    Equalize and optimize terrestrial and satellite signals for your optical installation (70 dB?V output power is optimal: you might use the test port (-30dB))
    Specifications
    Inputs – 1 SAT + 1 FM + 1 DAB/VHF + 2 UHF
    Outputs – 1 main (SAT-FM-DAB-VHF-UHF) + 1 test port (-30dB)
    Frequency range MHz
    MHz
    MHz
    MHz SAT: 950 – 2400?
    FM: 88 – 108?
    VHF:174 – 240?
    UHF: 470 – 862
    LTE protection MHz Automatic selection: 694, 790 or OFF
    Input level dB?V
    dB?V
    dB?V
    dB?V SAT: 40 – 95?
    FM: 37 – 77?
    VHF: 45** – 109?
    UHF: 45** – 109
    SAT output power (-35dBc/IM3 2 carriers) dB?V 119
    FM output power (60dB/IM3) dB?V 113
    VHF/UHF output power (60dB/IM3) dB?V 115
    VHF/UHF output power (36dB/IM3) dB?V 126
    VHF/UHF output power with 6 MUX dB?V 108
    VHF/UHF output power with 15 MUX dB?V 105
    Number of channels – More than 50 (15 filters)
    Add channels – Per 1, 2, 3, 4, 5 or 6 MUXes
    Conversion – Yes (from any VHF-UHF channel to any VHF-UHF channel)
    Gain dB
    dB
    dB
    dB SAT: 40?
    FM: 35?
    VHF: > 60?
    UHF: > 60
    Gain adjustment dB
    dB
    dB SAT: 20?
    FM: 20?
    VHF/UHF: Channel AGC
    Noise figure dB
    dB SAT: 8
    VHF-UHF: 7
    General attenuator dB 20
    Slope adjustment dB 12
    VHF/DAB attenuator dB 15
    Selectivity dB/1MHz
    dB/1MHz? SAT: 40 (@ 862 MHz)?
    VHF/UHF: 35
    Return Loss? dB 10
    Output MER dB
    dB VHF: >35?
    UHF: >35
    ESD protection – All inputs
    DC @ VHF/UHF input?
    DC Load current @ VHF/UHF input V
    mA 12 or 24
    100 (total for the 4?VHF/UHF inputs)
    DC @ SAT input?
    DC Load current @ SAT input –
    mA 13V/18V/Bypass & 0/22kHz selectable by SW?
    300
    Operating temperature ?C -5 to +50
    Power Supply
    Power Consumption V
    W 100 – 240
    17
    Dimensions mm 217 x 165 x 59
    Weight kg 0,8

    Add to cart
  • HDMI Streamer: 1 HDMI input / 1 HDMI loop through / 1 IP streaming port

    Put an HDMI stream on your local OR WORLDWIDE network The Johansson HDMI Streamer is designed for small to medium-sized projects.?

    It is a High Definition Video and Audio Encoder that makes it easy to put your HDMI source on a (local) network and/or internet.?

    This gives the end-user the flexibility to see your real-time video content on their preferred (mobile) device: smartphone, tablet, laptop or TV.?

    The end-user can simply surf to a dedicated webpage or streaming service. No need to install a mobile application or additional software, it works on any web browser.?

    Interesting for local video (surveillance cams, digital signage, advertisements, info channel, creating your own local broadcast, etc) and for streaming to live platforms (e.g. Facebook Live, YouTube Live, Ustream, Wowza, etc).?

    The 8210 has multiple functionalities:?
    Enable a HDMI source on your local network using the built-in webpage (HLS unicast)?
    Multicast a HDMI source for an IPTV application (UDP multicast)?
    Publish your live stream to an online platform (RTMP)?
    HDMI loop-through for simultaneous viewing on a local TV
    Specifications
    Inputs – 1x HDMI
    Outputs – 1x IP Ethernet RJ-45 jack (for streaming+WebGUI)?
    1x HDMI loopthrough
    HDMI input – Video resolution: 576i up to 1080p?
    Video encoding: H264/AVC?
    Video bitrate encoding: from 1 Mbps to 30Mbps?
    Audio encoding: MPEG2?
    Audio bitrate encoding: 32 -192 Kbps?
    Streaming port Mbps 10/100
    Ethernet OTT encapsulation – HLS (Apple HTTP Live Streaming) (unicast)
    Ethernet multicasting – Possible to output UDP multicast (requires external IGMP snooping equipment)
    Simultaneous users – Up to 30 (depending on the bitrate and the network infrastructure)
    Input resolution – Up to 1080p60
    Supported playback 0 All HTML 5 browsers on Android/iPhone/Mac/PC/SmartTV/??
    No need to install mobile application or additional software?
    Configuration – Network/login/input encoder settings/output multicast settings
    Power consumption W 5
    Operating temperature ?C 0 to +50 (for indoor use only)
    Dimensions mm 155 x 120 x 50
    Weight Kg 0,6

    Add to cart
  • Compact headend with 8 tuners and 4 output MUXs (DVB-T/C) / 2CI slots

    Titanium is our newest compact headend solution that is suitable for small to medium-sized budget-friendly projects.
    The transmodulator with 8 tuners allows for very fast installation.

    Features
    Standalone frame with built-in power supply
    8 tuners
    2 CI slots for CAM cards
    4 output MUXs (DVB-T/C)
    RF In & RF Out
    This is what the customers value most about the TITANIUM
    Selectable reference tuner for each CAM
    User friendly web interface, see attached user manual.
    SID remapping
    Local Channel Numbering (LCN)
    Full matrix flexibility between input, DVB-S(2) tuners, CAM modules, DVB-T/C multiplexes
    EPG support (EPG is only processed for forwarded services)
    PID filtering of e.g. Audio channels
    Possibility to block all private data PIDs to save bandwidth
    Possibility to prioritize important TV channels
    Watchdog feature to guarantee uptime
    Easily upgradable firmware
    Specifications
    Input: QPSK/8PSK (DVB-S/-S2)
    Inputs – 4 satellite bands
    1 x RF in
    Tuners – 8 tuners (8 transponders)
    Frequency range MHz 950-2150
    Level dB?V 44 – 84
    Bandwidth MHz 36
    Modulation – DVB-S2: QPSK, 8PSK / DVB-S: QPSK
    DC remote power at RF input – 13 V/18 V/22 kHz
    Integrated multiswitch – Yes, allows flexible routing of satellite proframs to multiplexes
    (QAM or QOFDM)
    Configuration – Built-in webserver accessible via management port
    Encoded programs – From all 8 tuners.
    Can be routed through 1 or 2 CAMs and can be decoded
    using multi-service CAMs
    Max current per input to feed LNB mA 350 per input
    Output: RF
    Outputs – 1 with 4 MUXs (DVB-T or DVB-C)
    DVB-T output Mbps Up to 31.7 / MUX
    DVB-C output Mbps Up to 51.3 / MUX
    Output level dB?V 69 – 84 (adjustable)
    Output MER dB ? 43
    General
    Power consumption W 22 (excl. external LNBs)
    Dimensions cm 34.5 x 7 x 18.2
    Operating temperature ?C 0 to +50
    Downloads / Documents

    USER MANUAL

    Add to cart
  • Compact headend with 8 tuners and 8 output MUXs (DVB-T/C) / 4CI slots

    Titanium is our newest compact headend solution that is suitable for small to medium-sized budget-friendly projects.
    The transmodulator with 8 tuners allows for very fast installation.

    Features
    Standalone frame with built-in power supply
    8 tuners
    4 CI slots for CAM cards
    8 output MUXs (DVB-T/C)
    RF In & RF Out
    This is what the customers value most about the TITANIUM
    Selectable reference tuner for each CAM
    User friendly web interface, see attached user manual.
    SID remapping
    Local Channel Numbering (LCN)
    Full matrix flexibility between input, DVB-S(2) tuners, CAM modules, DVB-T/C multiplexes
    EPG support (EPG is only processed for forwarded services)
    PID filtering of e.g. Audio channels
    Possibility to block all private data PIDs to save bandwidth
    Possibility to prioritize important TV channels
    Watchdog feature to guarantee uptime
    Easily upgradable firmware
    Specifications
    Input: QPSK/8PSK (DVB-S/-S2)
    Inputs – 4 satellite bands
    1 x RF in
    Tuners – 8 tuners (8 transponders)
    Frequency range MHz 950-2150
    Level dB?V 44 – 84
    Bandwidth MHz 36
    Modulation – DVB-S2: QPSK, 8PSK / DVB-S: QPSK
    DC remote power at RF input – 13 V/18 V/22 kHz
    Integrated multiswitch – Yes, allows flexible routing of satellite proframs to multiplexes
    (QAM or QOFDM)
    Configuration – Built-in webserver accessible via management port
    Encoded programs – From all 8 tuners.
    Can be routed through 1, 2, 3 or 4?CAMs and can be decoded
    using multi-service CAMs
    Max current per input to feed LNB mA 350 per input
    Output: RF
    Outputs – 1 with 8 MUXs (DVB-T or DVB-C)
    DVB-T output Mbps Up to 31.7 / MUX
    DVB-C output Mbps Up to 51.3 / MUX
    Output level dB?V 69 – 84 (adjustable)
    Output MER dB ? 43
    General
    Power consumption W 22 (excl. external LNBs)
    Dimensions cm 34.5 x 7 x 18.2
    Operating temperature ?C 0 to +50
    Downloads / Documents

    USER MANUAL

    Add to cart
  • Compact SAT IF to IF Headend: 4 inputs

    The 9780 is the new generation convertor for satellite signals to be used in MDU?s. The compact plug-and-play module has a straightforward and easy configuration. Perfect for equalizing and optimizing satellite transponders as input for your optical headend.

    Multi-functional satellite IF-IF Headend: convertor, stacker, equaliser, optimizer
    Up to 32 DVB-S/S2 transponders?
    4 satellite inputs (Quattro/Quad/Wideband LNB)?
    Realtime AGC on all individual transponders?
    Read-out of input level strength: no need for field strength meter?
    110 dB?V (output level)?
    Auto-tuning functionality?
    Can be used in Fiber Optic Systems with up to 128 passive splits

    Here?s what the first users of the compact SAT IF yo IF headend say:: it truly is an innovative product with 5 big advantages:?

    The most cost-efficient satellite IF-IF solution on the market?
    Very easy and fast installation, without the need for a field strength meter?
    Extremely sharp filters?
    Perfect for equalizing and optimizing satellite transponders as input for a fiber headend?
    Excellent quality of the output signal, the 9780 optimises the incoming satellite signal to assure supreme video quality on the end-users’ TV-screens.
    Specificacions
    Inputs – 4SAT (Wideband/Quattro/Quad)
    Outputs? – 1 main (SAT) + 1 test port (-20dB)?
    SAT Input Frequency range? MHz 290 – 2340?
    SAT Output Frequency range? MHz 290 – 2340?
    SAT Input level? dB?V 40 – 95?
    SAT output power (per transponder) dB?V 110
    SAT output power (35dB/IM3) dB?V 132
    SAT output level flatness? dB <1? SAT output level adjustment? dB >40
    Slope adjustment? dB 15
    SAT Gain? dB >40
    Number of transponders? – 32
    Conversion? – Yes (all transponders)?
    Transponder Bandwidth? MHz 1 – 77 (per 1 MHz steps)?
    Selectivity? dB 35 (@ 1MHz)?
    Return Loss? dB 10
    Auto tuning? – ?Yes (incoming transponders are copied from 1 input to output)
    ESD protection? – All inputs?
    DC@ SAT input? – 13V/18V & 0/22kHz selectable by SW
    DC Load current @ SAT input mA ?500
    SD port? – Yes (for copy configuration)?
    Operating temperature? ?C -5 to +50?
    Power Supply? V 100 – 240?
    Power Consumption? W 25
    Dimensions mm 217 x 165 x 59?
    Weight? kg 0.8

    Add to cart
  • This digital compact headend allows you to receive any satellite, terrestrial or cable transponder and put it on your coaxial and IP network.

    Features
    This compact digital header allows you to receive
    Any terrestrial, satellite or satellite transponder
    Cable and put it into your coaxial network and IP
    Specifications
    GENERAL
    CI SLOT 1
    INPUT VOLTAGE 12-20Vdc
    CONSUMPTION 7W (Without CAM and without remote power)
    DC JACK ?21mm
    POWER SUPPLY REMOTE UNITS Yes, 1 unit can power other Units
    OPERATING TEMPERATURE 0 to 50?C
    DIMENSIONS 222x142x50mm
    WEIGHT 1.1Kg
    EAN-13 CODE 2086000000019
    ACCESSORIES Power Supply 15V, 1 Ethernet cable

    Add to cart
  • Network management platform based on the FCAPS model (Fault, Configuration, Accounting, Performance and Security). It facilitates the monitoring of the equipment in the network, including all the necessary features to offer a complete overview of the network infrastructure regardless of the underlying technology, and centralizing the reception of events.

    Add to cart
  • Server + Monitoring Software. Software tool and its configuration for the GPON infraestructures monitoring. It provides visibility in detail about devices and users in the network.

    Add to cart
  • Monitoring Software. Software tool and its configuration for the GPON infraestructures monitoring. It provides visibility in detail about devices and users in the network.

    Add to cart
  • Module that processes 2 input channels, analog or digital, regardless of the type of service, to function as a channel converter (using different input and output channels) or as an amplifier (with the same input and output channel). Televes 564901

    Add to cart
  • Low-cost digital header that allows transmodulating DVB-S / S2 satellite channels to DVB-T digital terrestrial television format with Common Interface slots that allow you to decode encrypted channels.

    CompactMax-1 is a compact system that allows you to distribute satellite TV channels (DVB-S or DVB-S2) in the Digital Terrestrial Television (DVB-T) format. It supports a maximum of 4 satellite inputs (2 inputs for free channels and 2 for encrypted channels) to deliver up to 8 DVB-T muxes to the output, with dynamic remote management via webserver. It is integrated in a 1U size module for standard 19″ rack mounting. It can also be mounted directly on the wall.

    CompactMax-1 can be used in TV headers of all kinds: hotels, convention centers, hospitals, boats, etc. It can also be used in television repeaters to cover shadow areas.

    CompactMax-1 connects to a local LAN or the Internet. In this way the remote control of the system is carried out from any computer with access to the network through a web interface or webserver.

    Features
    4 satellite inputs transmodulated in up to 8 DVB-T muxes.
    2 CI slots to decode encrypted channels.
    PID filtering to select the desired output channels.
    Regeneration of PAT, PMTs, SDT and NIT tables.
    Remote control and management via webserver through LAN or Internet.
    Downloads

    DATA SHEET

    MANUAL

    Add to cart
  • Digital low-cost headend that enables transmodulating DVB-S/S2 satellite channels into second generation digital terrestrial television format (DVB-T2) with Common Interface slots that allow to decode encrypted channels.

    CompactMax-2 is a compact transmodulation system that allows to distribute Satellite TV channels (DVB-S or DVB-S2) in Second Generation Digital Terrestrial Television (DVB-T2) format. It can be connected to up to 4 satellite inputs (2 inputs for free channels and 2 for encrypted ones) to deliver up to 4 DVB-T2 muxes with dynamic webserver management via remote control. It is integrated into a 19″ 1U Rackmount case. It can also be mounted directly on the wall.

    CompactMax-2 can be used in TV headends in hotels, convention centres, hospitals, ships, etc. It can also be used as a TV repeater to cover shadow areas.

    CompactMax-2 can be connected to a LAN local network or to the Internet. In this way remote control can be done from any PC computer using the integrated webserver.

    Features
    4 satellite inputs transmodulated into 4 DVB-T2 muxes.
    2 CI slots for decoding encrypted channels.
    PID filtering to select the desired output programmes.
    PID regeneration of PAT, PMTs, SDT and NIT tables.
    Webserver for remote control and management via LAN or Internet.
    Downloads

    DATA SHEET

    MANUAL

    Add to cart
  • Digital low-cost headend that enables transmodulating DVB-S/S2 satellite channels into second generation digital terrestrial television format (DVB-T2).

    CompactMax-3 is a compact transmodulation system that allows to distribute Satellite TV channels (DVB-S or DVB-S2) in Second Generation Digital Terrestrial Television (DVB-T2) format. It can be connected to up to 4 satellite inputs (2 inputs for free channels and 2 for encrypted ones) to deliver up to 4 DVB-T2 muxes with dynamic webserver management via remote control. It is integrated into a 19″ 1U Rackmount case. It can also be mounted directly on the wall.

    CompactMax-3 can be used in TV headends in hotels, convention centres, hospitals, ships, etc. It can also be used as a TV repeater to cover shadow areas.

    CompactMax-3 can be connected to a LAN local network or to the Internet. In this way remote control can be done from any PC computer using the integrated webserver.

    Features
    4 satellite inputs transmodulated into 4 DVB-T2 muxes.
    PID filtering to select the desired output programmes.
    PID regeneration of PAT, PMTs, SDT and NIT tables.
    Webserver for remote control and management via LAN or Internet.
    Downloads

    DATA SHEET

    MANUAL

    Add to cart
  • Digital low-cost headend that enables transmodulating DVB-S/S2 satellite channels into second generation digital terrestrial television format (ISDB-T/Tb) with Common Interface slots that allow to decode encrypted channels.

    CompactMax-4 is a compact transmodulation system that allows to distribute Satellite TV channels (DVB-S or DVB-S2) in Digital Terrestrial Television (ISDB-T/Tb) format. It can be connected to up to 4 satellite inputs (2 inputs for free channels and 2 for encrypted ones) to deliver up to 8 ISDB-T/Tb muxes with dynamic webserver management via remote control. It is integrated into a 19″ 1U Rackmount case. It can also be mounted directly on the wall.

    CompactMax-4 can be used in TV headends in hotels, convention centres, hospitals, ships, etc. It can also be used as a TV repeater to cover shadow areas.

    CompactMax-4 can be connected to a LAN local network or to the Internet. In this way remote control can be done from any PC computer using the integrated webserver.

    Features
    4 satellite inputs transmodulated into 8 ISDB-T/Tb muxes.
    2 CI slots for decoding encrypted channels.
    PID filtering to select the desired output programmes.
    PID regeneration of PAT, PMTs, SDT and NIT tables.
    Webserver for remote control and management via LAN or Internet.
    Downloads

    DATA SHEET

    MANUAL

    Add to cart
  • Low-cost digital header that allows transmodulating DVB-S/S2 satellite channels to the TS over IP, RTP/UDP format (conforming to SMPTE 2022-1/2) with Common Interface slots that allow you to decode encrypted channels.

    CompactMax-5 is a compact system that allows you to distribute satellite TV channels (DVB-S or DVB-S2) in IPTV format (TS over IP). It supports a maximum of 4 satellite inputs (2 inputs for free channels and 2 for encrypted channels) to deliver up to 10 IPTV streams (SPTS or MPTS), with dynamic remote management via webserver. It is integrated in a 1U size module for standard 19″ rack mounting. It can also be mounted directly on the wall.

    CompactMax-5 can be used in TV headers of all types: hotels, convention centers, hospitals, boats, etc.

    CompactMax-5 connects to a local LAN or the Internet. In this way the remote control of the system is done from any computer with access to the network through a web interface or webserver.

    Features
    4 satellite inputs transmodulated in up to 10 IPTV streams (SPTS or MPTS).
    2 CI slots to decode encrypted channels.
    PID filtering to select the desired output channels.
    Regeneration of PAT, PMTs, SDT and NIT tables.
    Remote control and management via webserver through LAN or Internet.
    Downloads

    DATA SHEET

    Add to cart
  • Domestic 1-input HDMI device, which generates a digital multiple with the signal provided by an Audio/Video source. Televes 566001

    Add to cart
  • Streamer generating an IP encapsulated output from the multiplexing of the services available in up to 3 different TV SAT transponders. These may be extracted from 2 different satellites (2 independent SAT inputs), or from a single satellite, using the headend’s input loop.

    Add to cart
  • Streamer that generates an encapsulated IP output, from the multiplexing of available services in up to 3 different SAT TV transponders. These can be extracted from 2 different satellites (2 independent SAT-FI inputs), or from a single satellite through the input loop itself at the headend.

    Add to cart
  • Streamer generating an IP encapsulated output from the multiplexing of the services available in 4 different DVB-T or DVB-T2 muxes.

    Add to cart
  • Streamer that generates an encapsulated IP output, from the multiplexing of services available in 4 DVB-T or DVB-T2 muxes. Through the CI interface and the corresponding CAM module, the encrypted satellite channels are transformed into free IP services. Depending on the CAM used (standard / professional), one or more services can be opened for open viewing.

    Add to cart
  • It implements an element with the capacity to convert Televes headers into a communications center, either through its internal GSM / GPRS Modem (Ref. 555901) or through the Ethernet interface for IP communications (Ref. 5559 and Ref. 555901). Televes 5559

    Add to cart
  • Transmodulator that generates a COFDM multiplex from the multiplexing of services available in up to 3 different TV SAT transponders. Extracted from a single satellite through the input loop itself to the header. Televes 564201

    Add to cart
  • Transmodulator that generates two COFDM multiplexes from the multiplexing of services available in up to 3 different TV SAT transponders. These can be extracted from 2 different satellites (2 independent SAT-IF inputs), by means of the input loop to the header itself. Televes 564301

    Add to cart
  • Transmodulator that generates a QAM multiplex from the multiplexing of services available in up to 3 different SAT TV transponders. Extracted from a single satellite through the input loop itself to the header. Televes 564101

    Add to cart
  • Transmodulator that generates a QAM multiplex from the multiplexing of services available in up to 3 different SAT TV transponders. Extracted from 2 different satellites (2 independent SAT-IF inputs) by the input loop itself to the header. Televes 564401

    Add to cart
  • Software allowing the configuration of all programmable products (Except AVANT 3 ) + Cable.

    Add to cart
  • Transmodulator that generates two QAM (DVB-C) Multiplex from the services available in either a TV SAT transponder or two transponders of the same band and polarization. Highlights Total or selective removal of the services present in the received transponder, to avoid them being detected (and memorized) by the receivers (STB) Editable TS_ID, which makes programme/service …

    Twin Transmodulator DVBS/S2 – DVBC (QAM Annex A) TelevesRead More

    Add to cart