Alcad CH-030 Chimney clamp 35 mm
KSh8,394.00
Alcad CH-030 – Serie 998: Chimney clamp 35 mm.
Chimney clamp to fix the mast to a chimney which is held firmly in place by means of a wire rope which goes around the chimney and a system of turnbuckles.
Applications
Used as an alternative to wall brackets in installations which do not require very long masts. It allows antennas to be installed without having to carry out any work to the facade of the building.
Characteristics
Made from roound zinc-coated iron tube of ?30×1.5 mm or ?35×1.5mm and L-shaped profiles with a system of two long M8 turnbuckles. M8 clamps for ?50 mm masts.
Downloads
Technical specification
Technical specification
Catalogues
CATALOGUE_ALCAD_EN_MULTIMEDIA_TV pdf 5.42 MB
Technical specifications
Related products
-
Anti-climb panels for 450XL towers 3 pcs Televes
KSh137,094.00Add to cartKit of 3 galvanized steel panels, for installation on each of the surfaces of a 450XL series tower. The panels are anchored with screws and improve the tower safety by preventing climbing and manipulation by unqualified personnel.
-
Add to cartThis product is not sent to some countries or areas, if the cart does not have available carriers, you can contact us here
3m Middle Section reinforced for the erection of a 180 tower.
The section is painted white.
Features
Anchoring system with union nuts
Easy and quick mounting
Fully automated soldering
180 tower maximum height: 26.5m (as per calculation conditions)
The hot-dip galvanizing surface treatment provides enhanced durability in adverse corrosion conditions
Colour paint, oven-lacquering with polyester electrostatic powder
White finish
Specifications
Surface facing the wind 0.236 m2 x 1.2 coef. = 0.283 m2 -
Add to cartIntermediate section of 3 m for the formation of a tower of the 550 XL series. The reinforced sections provide greater robustness as they are built with a tube of greater diameter and thickness, so more complicated scenarios can be solved.
-
Surface plate, Hot-Dip Galvanizing 450XL and 550 towers…
KSh283,382.00Add to cartGround surface mount plate using pikes, no need for concrete. Used for bolting on it a pivoting base from 450XL or 550 range (ref. 313412 and 3142xx).
Features
The hot-dip galvanizing surface treatment provides enhanced durability in adverse corrosion conditions
Grey finish -
Add to cartBlister. Mast clamp ? 25 … 45mm. Zinc + RPR. Shackle composed of a “U” screw and clamp, which can be installed on a mechanical part to fix a mast. Made of steel and highly resistant to corrosion, thanks to its dual galvanized treatment and reactive sealing (RPR).
Reviews
There are no reviews yet.