Alcad MT-325 Mast 3000x25x1.5mm for telescopic set
KSh7,962.00
Alcad MT-325 – Serie 998: Mast 3000x25x1.5mm for telescopic set.
Masts for antennas. Several sections can be assembled telescopically to make a longer mast. Secured to the roof by means of a mast base for roof-tiles, to the wall by means of two brackets or to the chimney by means of a special clamp.
Applications
Used as a support for installations of terrestrial TV or radio antennas. Installations where a high elevation for the antennas is required or where traditional antenna masts do not offer sufficient strength. The telescopic system allows the mast to be lowered without having to dismount the mast or release its guy wires.
Characteristics
Made from round, zinc-coated iron tube. The different sections of the mast are assembled by inserting the upper part of the mast into the lower part of the other section securing them with an M10 screw.
Downloads
Technical specification
Technical specification
Catalogues
CATALOGUE_ALCAD_EN_MULTIMEDIA_TV pdf 5.42 MB
Technical specifications
Related products
-
Add to cartThis product is not sent to some countries or areas, if the cart does not have available carriers, you can contact us here Upper section of 3 m for the formation of a tower of the 550 XL series. The section is painted in red (RAL 3020). Stands out for Anchoring system by means of …
Upper Section 550XL Tower Reinforced G.C+ Red 3m (mast ?max…Read More
-
Add to cartFixed base, anchoring system for a free-standing 180 tower. It is possible to convert it into a recessed one by using its?televes-3029?hardware. Zinc + white painted.
Stands out for
Anchoring system by means of fittings
Ease and speed in assembly
Robotic welding
Maximum height of the Tower 180: 26.5m (according to calculation conditions)
Features
Fixed, no need for winds -
Add to cartLower section of 3 m for the formation of a tower of the 550 XL series. The section is painted in red (RAL 3020). Being a tilting section, it requires the installation of guy wires.
-
Add to cartThis product is not sent to some countries or areas, if the cart does not have available carriers, you can contact us here
3m upper section for the erection of a 180 tower.
The section is painted white.
Features
Anchoring system with union nuts
Easy and quick mounting
Fully automated soldering
180 tower maximum height: 26.5m (as per calculation conditions)
The hot-dip galvanizing surface treatment provides enhanced durability in adverse corrosion conditions
Colour paint, oven-lacquering with polyester electrostatic powder
White finish
Specifications
Surface facing the wind 0.227 m2 x 1.2 coef. = 0.272 m2 -
Add to cartFixed base, anchoring system for a free-standing 180 tower. It is possible to convert it into a recessed one by using its?televes-3029?hardware. G.C?+ white painted.
Stands out for
Anchoring system by means of fittings
Ease and speed in assembly
Robotic welding
Maximum height of the Tower 180: 26.5m (according to calculation conditions)
Features
Fixed, no need for winds
Reviews
There are no reviews yet.