Alcad MT-411 Mast 2500x40x2 mm galvanized
KSh9,164.00
Alcad MT-411 – Serie 998: Mast 2500x40x2 mm galvanized.
Masts for antennas. Several sections of the mast can be added to extend its length. Secured to the roof by means of a special mast base for roof-tiles, to the wall by means of two brackets or to the chimney by means of a special clamp.
Applications
Used as a support for the installation of terrestrial TV and radio antennas.
Characteristics
Made from round galvanised iron tube. The different sections of the mast are assembled by inserting the upper part of the mast into the lower part of the other section, securing them with an M6 screw which passes through the tubes.
Downloads
Technical specification
Technical specification
Catalogues
CATALOGUE_ALCAD_EN_MULTIMEDIA_TV pdf 5.42 MB
Technical specifications
Related products
-
Add to cartBlister. Mast clamp ? 25 … 45mm. Zinc + RPR. Shackle composed of a “U” screw and clamp, which can be installed on a mechanical part to fix a mast. Made of steel and highly resistant to corrosion, thanks to its dual galvanized treatment and reactive sealing (RPR).
-
Add to cartBurial plate, Hot-Dip Galvanizing 450 XL tower Underground mount plate using flat bars, no need for concrete. Used for embedding on it a pivoting base from 450 XL range (ref. 313412). Features The hot-dip galvanizing surface treatment provides enhanced durability in adverse corrosion conditions Grey finish 1.5×1.5m.
-
Add to cartPivoting embedded base with articulated anchoring system for a 450 XL – Reinforced range guy-wired braced tower. The base is painted red (RAL 3020). Televes 313412
-
Add to cartSuperficial installation plate on the ground, using stakes, without the need for concrete. Its function is to fix on it (by screwing) a tilting base of the 450 or 550 series (ref. 3134/01 and 3142/01). Characteristic Hot-dip galvanized surface treatment offers greater durability in adverse corrosion conditions Finished in gray
-
Add to cartThis product is not sent to some countries or areas, if the cart does not have available carriers, you can contact us here
3m Middle Section reinforced for the erection of a 180 tower.
The section is painted white.
Features
Anchoring system with union nuts
Easy and quick mounting
Fully automated soldering
180 tower maximum height: 26.5m (as per calculation conditions)
The hot-dip galvanizing surface treatment provides enhanced durability in adverse corrosion conditions
Colour paint, oven-lacquering with polyester electrostatic powder
White finish
Specifications
Surface facing the wind 0.236 m2 x 1.2 coef. = 0.283 m2
Reviews
There are no reviews yet.