Alcad UE-005 Universal single lnb
KSh1,646.00
Alcad UE-005 – Serie 912: Universal single lnb.
Universal single LNB for offset parabolic antennas, for individual installations.
High stability in frequency and high gain. The very low noise level provides quality reception in areas of weak signal.
Downloads
Technical specification
Technical specification
Catalogues
CATALOGUE_ALCAD_EN_MULTIMEDIA_TV pdf 5.42 MB
Certificates
CE Declaration UE-005 pdf 64.45 KB
Technical specifications
Related products
-
Add to cartThe LNB Inverto Unicable2 allows installations with up to 32 satellite receivers* through a single cable.
The LNB is factory set to “dynamic mode”.
The change to “static mode” can be done using the optionally available programmer.
Dynamic mode (delivery status)
Up to 32 receivers/tuners connected via a single coaxial cable. All devices have access to the total number of transponders available for the destination satellite. The receiving device must comply with EN50494 (CH0-CH7) or EN50607 (CH0-CH31). Example: A total of 120 transponders are transmitted from the satellite. Each of the 120 transponders can be received by any of up to 32 receivers/tuners installed in the home.
Static mode (adjustable by programmer**)
Any number of receiving devices connected with a single coaxial cable can receive up to 32 transponders. Here, 32 transponders are converted to 32 satellite IF frequencies using digital channel stacking technology. Example: A DTH operator offers its service through 32 transponders. Any number of receiving devices (Legacy or Unicable) can be connected via a single coaxial cable, each with access to any of 32 transponders.
The LNB is powered by a connected STB or via an optional external power supply/power inserter if the connected STB cannot supply enough power. The Unicable2 LNB is backward compatible and complies with EN50494 and EN50607 standards. Communication between the multi-switch and connected uni-cable receivers is performed in accordance with EN50494 and/or EN50607 and can be defined for each user band, allowing seamless integration into installations that only have EN50494 capability or a combination of EN50494 /EN50607- Compatible PVRs and latest generation HGW. To learn more about Unicable 2 technology and the benefits it brings, visit: www.inverto.tv
Features
Low phase noise, compatible with DVB-S2 (HDTV)
low noise figure
Very high cross polarization isolation
Programmable static mode with frequency assignment**
Antenna adjustment mode*8 subscribers can be used for terminals with Unicable standard (EN50494)
(CH0-CH7)
In terminals with Unicable II standard (EN50607) it can be used for all 32 participants
(CH0-CH31)
** Programming device not included
Technical specifications
Input frequency range: 10.7GHz ~ 12.75GHz
Noise figure: 1dB max.
LOW frequency: 10.4 GHz
LO Frequency Accuracy @ 25?C: 1.0 MHz max.
Initial accuracy LO: 500 kHz max.
Phase noise LO at 1 kHz: -60 dBc/Hz max.
LO phase noise at 10 kHz: -80 dBc/Hz max.
Conversion Gain: 55dB min.
Gain variation (over full band): ?0.75 dB/UB max.
Image rejection: 40 dB min.
1 dB compression point (@ output): 0 dBm min.
Cross Polarization Isolation: 22dB min.
SWR output: 2.5 : 1
Current consumption: 280 mA max. @ 18VDC
Operating temperature: -30 ?C ~ +60 ?C
Output impedance: 75 ?
Output Connector Type: F Type (Female)
Weight: 152.5g
Unicable II? (dCSS) Port SpecificationsBandwidth User Band: Configurable, 10 MHz ~ 64 MHz (default 36 MHz)
Output Power Level (dSCR/dCSS with AGC): -25dBm (83dBuV) +/-1dB
Number of User Bands: Up to 32 User Bands
Standard configuration: 32 BU in dynamic mode:
CH1 1210MHz (EN50494+EN50607)
CH2 1420MHz (EN50494+EN50607)
CH3 1680MHz (EN50494+EN50607)
CH4 2040MHz (EN50494+EN50607)
CH5 984MHz (EN50494+EN50607)
CH6 1020MHz (EN50494+EN50607)
CH7 1056MHz (EN50494+EN50607)
CH8 1092MHz (EN50494+EN50607)
CH9 1128MHz (EN50607)
CH10 1164MHz (EN50607)
CH11 1256MHz (EN50607)
CH12 1292MHz (EN50607)
CH13 1328MHz (EN50607)
CH14 1364MHz (EN50607)
CH15 1458MHz (EN50607)
CH16 1494MHz (EN50607)
CH17 1530MHz (EN50607)
CH18 1566MHz (EN50607)
CH19 1602MHz (EN50607)
CH20 1638MHz (EN50607)
CH21 1716 MHz (EN50607)
CH22 1752MHz (EN50607)
CH23 1788 MHz (EN50607)
CH24 1824 MHz (EN50607)
CH25 1860MHz (EN50607)
CH26 1896 MHz (EN50607)
CH27 1932MHz (EN50607)
CH28 1968 MHz (EN50607)
CH29 2004MHz (EN50607)
CH30 2076 MHz (EN50607)
CH31 2112MHz (EN50607)
CH32 2148MHz (EN50607)
Control protocols: DiSEqC1.x / DiSEqC2.x, EN50494 / EN50607
Channel isolation: 25 dB min.
-
Read moreInverto?s high-performance Ultra LNBs were specifically designed to address the need for superior reception under the edges of the satellite footprint skirt, small dish sizes or long coax cables. Thanks to its novel feed horn design and superior front-end components, this LNB provides higher conversion gain yet with low noise figure and best phase noise performance. The combination of innovative feed horn design, higher spec components, excellent cross polarization isolation and advanced filter design enables improved handling of interfering and spurious signals. This LNB provides a leap in the overall reception performance compared with standard LNBs, enabling the reception of signals from one satellite, its distribution to four Set Top Boxes with Single Tuner (or two STB with Twin Tuner each) and is ready for Ultra High Definition TV transmissions in 4K or 8K resolution. Designed to meet strict specifications and manufactured to the highest industry standards, this unique range of LNBs is an ideal solution for installations with challenging reception conditions.
Features
Novel feed horn design
Superior Phase Noise performance, DVB-S2X compliant supporting Ultra HD (4K and 8K) TV
Excellent Cross Polarization Isolation
Very Low Spurious Levels
Superior Noise Figure with high Conversion Gain
High 4G Immunity
Ultimate ReliabilitySpecifications
Technical specifications
Low band input frequency range 10.7 GHz ~ 11.7 GHz
Low band output frequency range 950 MHz ~ 1950 MHz
Low band LO frequency 9.75 GHz
High band input frequency range 11.7 GHz ~ 12.75 GHz
High band output frequency range 1100 ~ 2150 MHz
High band LO frequency 10.6 GHz
Noise figure 0.6 dB typ. (1 dB Max.)
LO temperature drift ? 2.0 MHz max.
LO initial accuracy ? 1.0 MHz max.
LO phase noise @ 1 kHz -70 dBc/Hz
LO phase noise @ 10 kHz -80 dBc/Hz
LO phase noise @ 100 kHz -90 dBc/Hz
LO phase noise @ 1 MHz -100 dBc/Hz
Conversion gain 60 ~ 70 dB
Gain ripple (over 26 MHz bandwidth) 1 dB max. (peak-to-peak)
Gain variation (over full band) 4 dB max. (peak-to-peak)
Image rejection 50 dB min.
3th order intermodulation – ICP3 +10 dBm min
1 dB compression point (@ output) 0 dBm min.
Cross polarization isolation 22 dB min.
Output VSWR 2.0 : 1 max.
In band spurious level -65 dBm max.
Current consumption 230 mA max. (10 VDC ~ 20 VDC)
Operating temperature -30 ?C ~ +60 ?C
Output impedance 75 ? (F-type)
Output connector type F-Type (female)
Weight 177 g -
-
Conversor LNB Universal Televes
KSh2,638.00 -
Alcad UE-301 Quad lnb, universal
KSh6,412.00Add to cartAlcad UE-301 – Serie 912: Quad lnb, universal.
Universal quad LNB for offset parabolic antennas, for individual installations.
High stability in frequency and high gain. The very low noise level provides quality reception in areas of weak signal.
Downloads
Technical specification
Technical specification
Catalogues
CATALOGUE_ALCAD_EN_MULTIMEDIA_TV pdf 5.42 MB
Certificates
CE Declaration UE-301 pdf 64.45 KB
Technical specifications
Reviews
There are no reviews yet.