BT Terminal Board 5 Pairs (Box 5 units) Televes
The 5-pair terminal blocks are designed to accommodate and connect up to 5 pairs of telephone cable (2×5 contacts) by displacing their insulation. Supplied in boxes of 5 units.
Telephone strip
5 Pairs
The 5-pair terminal blocks are designed to accommodate and connect up to 5 pairs of telephone cable (2×5 contacts) by displacing their insulation.
Supplied in boxes of 5 units.
Stands out for
Insulating material block
Insulator displacement connection system
Corrosion resistance according to UNE 2050-2-II (CEI 68-2-II)
Reduced dimensions
Main Features
Disconnectible connection elements for measurements on both sides without lifting the connections
Allows the passage of current Input-Output and vice versa
specs
Reference 2173
No. of pairs 5
Insulation resistance between contacts MOhms > 10 6
Contact resistance MOhms <10
Electrical stiffness (See CA)
> 1000
Vdc > 1500
Anti-corrosion resistance UNE 2050-2-11
Dimensions mm
75 x 21 x 31.5
Related products
-
Ikusi SRT-100 Rack for 10 strips of 10 pairs
KSh1,320.00Add to cart100 pr stainless steel frame (10 strips x 10 pr).
TECHNICAL SPECIFICATIONS
INSTALLATION MANUAL
-
Identification cover 10 pairs (Box 20 units) Televes
KSh16,020.00Add to cartIdentifying cover. For strip of 10 pairs. Cover that allows to identify each one of the pairs independently. Supplied in boxes of 20 units.
-
Blind cover T.0X Televes
KSh3,634.00Add to cartT.0X Blind embellishing plate. 50mm – 5U. Front panel in white in 19″ format. Televes 5673
-
Read moreAlcad PT-320 – Serie 907: If user acces point, if splitter 3 out.
User access point for terrestrial and satellite TV. It has two inputs and three outputs. One of the inputs remains connected to the outputs while the other input is permanently connected to a 75 ohm load. Designed for the 5-2,400 MHz frequency range. Also available in 2-, 4-, 5-, 6- and 8-output models.
Applications
Designed for TV installations with two coaxial cables in which distribution to the houses is performed with a single coaxial cable. The signal which is distributed to the house is selected by changing the connections of the coaxial cables at the user access point.
Characteristics
Voltage blockage in the output connectors. No return path. Shielded zamak and metal plate chassis. F type connectors in machined zamak which form part of the chassis. Reduced dimensions.
Downloads
Technical specification
Technical specification
-
Read moreAlcad DI-303 – Serie 906: If splitter 3 out with dc path.
3-way splitter for terrestrial and satellite TV, covering all frequencies from 5MHz to 2,400MHz. It distributes all the input signal in equal parts among the 3 outputs. It has a feed path through any of its 3 outputs to the input. The response of the outputs is flat. Also available in 2-, 4-, 6- or 8-way models.
Applications
Individual and collective installations of terrestrial and satellite TV with a star-shaped distribution. They permit power to be fed from a preamplifier or LNB through any of the outputs. In installations with multiswitches, a control voltage can be sent through their outputs.
Characteristics
Protection diodes in all the outputs. Shielded zamak chassis and metal plate. Zamak F-type connectors which form part of splitter chassis.
Downloads
Technical specification
Technical specification
Manuals
DI-303 Manual pdf 923.93 KB
Catalogues
CATALOGUE_ALCAD_EN_MULTIMEDIA_TV pdf 5.42 MB
Certificates
CE Declaration – 906-DI_20210426 pdf 70.31 KB
Technical specifications
Reviews
There are no reviews yet.