ECHOGEAR Soundbar Wall Mount Bracket – Works with All Soundbars Including Samsung, Vizio, LG, & More – Depth Adjustable for Dolby Atmos Soundbars
KSh3,500.00
Brand ECHOGEAR
Mounting Type Wall Mount
Special Feature Adjustable
Material Wood
Item Dimensions LxWxH 5 x 3 x 4 inches
Mount your soundbar to the wall with this universal bracket. Low profile design holds up to 20 lbs securely to the wall without blocking your speaker.
No stud, no problem. This soundbar mount can be installed on drywall or wood studs for maximum placement flexibility. Comes with all the hardware you’ll need so you won’t have to wander around Home Depot.
Compatible with any soundbar including LG, Samsung, Vizio, Bose, and more. If your speaker has mounting holes on the bottom, use the included screws to secure your speaker even more.
Works with Dolby Atmos soundbars thanks to the 6.6″ of depth adjustments that prevent your TV from blocking the up-firing sound. Now throw on Godzilla vs. Kong and crank up the volume!
Pre-divided installation hardware & clear manual included for a quick and painless setup
Slap Your Soundbar On This Bracket
Don’t worry about looking at which type of soundbar you have, this wall mounted bracket will work if it’s under 20lbs. Back-mounted soundbars sit securely on the mount, and bottom-mounted soundbars can be attached with the included screws. Install only takes a few minutes and works with both drywall and wood stud. Everything you need for a clean install is in the box, so you can skip that extra Home Depot run.
Go Deep Like Chad
If you’ve got a Dolby Atmos enabled soundbar, that’s legit. Nothing brings the heat to your movie marathon like ceiling deflected sound. However, finding a soundbar mount that doesn’t put your speaker directly under the TV is tough. We made this thing to be Dolby Atmos compatible. Adjust the depth up to 6.6″ from the wall to give that sound the room it needs to rock your undies clean off.
Wrangle Up Those Cables
Once your soundbar is on the wall along with your TV, you’re almost ready to host the party of the century. All you need is a 30 rack of Hamm’s, a bottle of Plum Ice Hole, and a killer playlist. Oh, wait… those dangling TV/soundbar wires are going to bring the vibe down. Don’t worry, we don’t want your party to end early due to rouge cables. Take a peek at our EGAV-CMIWSB. It’s can route your TV & soundbar cables all behind the wall. Now crack open that Ice Hole and pass it over here.
Model: EGAV-SSBWM1
adjustable dream wali vivo usx justmount amazon basics cyber prime deal sale best
Mount soundbar sound bar wall bracket mounts lg Samsung vizio universal mounting kit sonos
stand depth adjustments brackets hanging led flush lcd mounting universal installation
Got a Dolby Atmos enabled soundbar? They are really cool. This mount can be adjusted forward so your sound isn’t blasting into the bottom of your TV screen. John Wick 3 is Atmos enabled for the record. What a legend.
All the hardware is in the box for both a quick drywall or wood stud install. Have concrete walls? They’ll work, but you’ll need to grab our concrete anchor kit (EGHWLB) to make it happen.
This bad boy works with both rear and bottom mounted soundbars. Screws are included to secure bottom mounted speakers. Now you have one less thing to worry about during your indoor wrestling matches.
Related products
-
Tilt TV mount for 14″-42″
KSh1,500.00Add to cartModel Number MCR-T001
Material SPCC
TV size 14″-42″
Tilt Range 0degrees-30degrees
Swivel Range0degrees
Weight Capacity 25kgs
VESA Compatible
300x260mmSize of outer carton
52.5*38*25cmG.W./N.W. 20KG/19KG
-
Add to cart
HT-001 up and down adjustable TV hanger (the thickness of this product is 0.8 mm-0.9mm-1.0mm 3 thickness, a large number of exports to South America, Europe and other countries, welcome to inquire and negotiate! )
Color: Black
Thickness: 1.0mm
Material: cold-rolled steel plate
Universal size: 15-42 inches
Maximum load: 40kgs
Product packaging description: accessories screw Pack + color box, simple and easy to install!
Gross weight/single: about 860g
Quantity/Box: 20
Weight/Box: about 17.5kg
Carton size: 52cm * 37.5cm * 25.5cm
-
Swivel TV mount for 26″-55″
KSh4,500.00Add to cartModel Number
MCR-402Material SPCC
TV size 26″-55″
Tilt Range -15Degrees to +15Degrees
Swivel Range180Degrees
Weight Capacity 35kgs
VESA Compatible
400x400mmSize of outer carton
56*41*25cmG.W./N.W. 25KG/24KG
-
Swivel TV mount for 32″-70″
KSh6,500.00Add to cartModel Number
MCR-119BMaterial SPCC
TV size 32″-70″
Tilt Range -15Degrees to +15Degrees
Swivel Range180Degrees
Weight Capacity 45kgs
VESA Compatible
600x400mmSize of outer carton
70*47*20cmG.W./N.W. 26KG/25KG
-
Add to cart
Our new titling TV wall mount is suitable for most Ultra HD LED LCD OLED HDR 4K Flat Panel Smart TVs, curved screens, displays 40″ ? 65 inches with VESA mounting patterns from 75 x 75 mm to 600 x 400 mm. TV mount frees up more space and offers an elegant look in your room, office, classroom or boardroom.
Features:
TV wall mount fits LED LCD OLED Flat Screens with diagonal 40″ – 65″
Compatible with VESA mounting patterns from 75 x 75 (min) to 600 x 400 (max)
Tilt your TV screen for comfortable viewing angle up to 12 degrees
Durable and stable construction holds TVs up to 80 lbs
Comes with all needed hardware, detailed installation guide, and built-in spirit level -
Tilt TV mount for 32″-65″
KSh3,500.00Add to cartModel Number MCR-T003
Material SPCC
TV size 32″-65″
Tilt Range 0degrees-30degrees
Swivel Range0degrees
Weight Capacity 30kgs
VESA Compatible
600x400mmSize of outer carton
67.5*28*25.5cmG.W./N.W. 14KG/13KG
-
LED/LCD/PDP Flat panel TV Wall Mount for 32”, 37”, 39”, 40”, 42”,50”,55”,63” Inches Monitor Wall Hanger
KSh2,000.00Add to cartProduct Model: 26-55 26-63 inch medium TV hanger (this product has two color box sizes, thickness 0.7mm-1.2mm 6 thickness, a large number of exports to South America, Europe and other countries, welcome to inquiry and negotiation! )
color: Black
thickness: 1.0mm
material: cold-rolled steel plate
general size: 26-55 inches 26-63 inches
maximum load: 50kgs
product packaging description: accessories screw Pack + color box, simple and easy to install!
Gross weight/single: about 840g
quantity/Box: 20
weight/Box: about 19.3kg
box gauge: 54cm * 49cm * 22cm
-
Swivel TV mount for 32″-75″
KSh12,000.00Add to cartModel Number
MCR-P6Material SPCC
TV size 32″-75″
Tilt Range -3Degrees to +15Degrees
Swivel Range180Degrees
Weight Capacity 50kgs
VESA Compatible
600x400mmSize of outer carton
63*46*37cmG.W./N.W. 34KG/33KG
-
HT-003 – TV Wall Mount Bracket Tilting LCD LED 32”, 37”, 39”, 40”, 42”,50”,55”,65”,70” Inches
KSh3,500.00Add to cartHT-003 up and down adjustable TV hanger (the thickness of this product is 1.0mm, and it is exported to South America, Europe and other countries. Welcome to inquire and negotiate! )
Color: Black
Thickness: 1.0mm
Material: cold-rolled steel plate
General size: 32-70 inches
Maximum load: 40kgs
Product packaging description: accessories screw Pack + color box, simple and easy to install!
Gross weight/single: about 1350g
Quantity/Box: 10
Weight/Box: about 13.8kg
Box gauge: 67cm * 28cm * 25cm
-
Add to cart
ALL YOU NEED IN ONE PACK: Our TV hardware comes with everything you need to attach your TV to a wall mount or stand. The pack contains M4, M5, M6, and M8 TV screws, washers, and spacers for mounting most TVs up to 80 inches
FITS MOST TV BRANDS: Our TV wall mount hardware fits most TV brands such as Samsung, LG, Sharp, Philips, Panasonic, Toshiba, Sony, Vizio, TCL, Sanyo, Insignia, Hitachi, Polaroid, RCA, JVC, Apex, Daewoo, Pioneer, Hisense, and more
STRONG AND DURABLE: This TV mount hardware kit comes with strong, durable screws that are resistant to stripping and designed to hold the weight of your TV
LABELED PARTS AND SIZES: The packaging of this TV hardware kit is clearly labeled with the names and sizes of each screw. Washers and spacers are neatly separated so you can easily find the items you need with minimal hassle
PURCHASE WITH CONFIDENCE: We are confident in the value and performance of our mount products. Please reach out to our US-based product support team if you have any questions or need assistance -
Swivel TV mount for 14″-55″
KSh3,000.00Add to cartModel Number MCR-814
Material SPCC
TV size 14″-55″
Tilt Range -3Degrees to +15Degrees
Swivel Range180Degrees
Weight Capacity 25kgs
VESA Compatible
400x400mmSize of outer carton
47.5*43*25cmG.W./N.W. 12KG/11KG
-
Tilt TV mount for 32″-65″
KSh3,500.00Add to cartModel Number MCR-WG09
Material SPCC
TV size 32″-65″
Tilt Range 0degrees-15degrees
Swivel Range0degrees
Weight Capacity 30kgs
VESA Compatible
600x400mmSize of outer carton
70*35*20cmG.W./N.W. 23KG/22KG
-
Add to cart
Product Model: 1.1mm-70 40-80 inch large integrated TV rack (this product has two color box sizes, thickness 1.2mm 1.4mm3 thickness, a large number of exports to South America, Europe and other countries, welcome to inquire and negotiate! )
color: Black
thickness: 1.1mm
material: cold-rolled steel plate
general size: 32-70 inches 40-80 inches
maximum load: 75kgs
product packaging description: accessories screw Pack + color box, simple and easy to install!
Gross weight/single: about 1400g
quantity/Box: 10
weight/Box: about 15kg
box gauge: 66cm * 31cm * 22cm
note: All the above product parameters are measured manually.
-
ONKRON Tilting TV Wall Mount with Low Profile Design for 40” to 85”-inch LCD LED OLED Flat Panel TV Screens up to 80 lbs Ultra Slim TM6
KSh8,000.00Original price was: KSh8,000.00.KSh7,500.00Current price is: KSh7,500.00.Add to cartMounting Type Wall Mount
Movement Type Tilt, Fixed
Brand ONKRON
Material Alloy Steel
TV Size 65 Inches
Color Black (39″ – 65″)
Minimum Compatible Size 39 Inches
Compatible Devices Televisions
Maximum Tilt Angle 12 Degrees
See less
About this item
TV mount fits most LED LCD flat screens TVs with diagonal 39″ to 65-inch
Compatible with universal VESA mounting hole patterns from 75 x 75 (min) to 600 x 400 (max)
Tilt your TV screen for comfortable viewing angle up to 12 degrees
Durable and stable steel construction holds TVs weighting up to 80 lbs
Comes with all needed hardware, detailed installation guide and built-in spirit level -
Add to cart
Product details
Brand Notiela
Color Black
Compatible Phone Models Sony
Mounting Type Wall Mount
Material Metal
*Sound bar wall mount floating shelves for Samsung soundbar brackets, wall mount for soundbar HW-T430 HW-T530 HW-T510 HW-T60M HW-T400 HW-T420 HW-S40T HW-S60T HW-Q60T HW-Q70T HW-Q800T HW-MS6500 HW-MS6501 HW-MS660 HW-MS661 HW-MS750 HW-MS751 HW-MS550 HW-MS560 HW-R450 HW-R550 HW-R650 HW-Q60R HW-Q70R HW-Q80R HW-Q90R HW-H450 HW-J250 HW-J550 HW-H750 HW-H751 HW-J355 HW-J450 HW-K550 HW-M450 HW-J550 HW-K850 HW-T450 HW-T550 HW-T650 soundbar wall mount bracket
*Universal soundbar wall mount for Sony HT-S350 HT-CT290 HT-Z9F HT-G700 HT-S100F HT-S200F HT-ST5000 HT-S40R HT-X9000F HT-MT300 HT-X8500; for TCL Alto 3, 5, 5+, 6, 6+, 7, 7+, 8, 8i, 9+ Sound Bar; For JBL 5.1, 3.1, 2.1 soundbar; For Vizio SB2920-C6 SB3821-D6 SB36512-F6 SB3621n-F8M SB3220n-F6 SB2821-D6 SB3821-C6 SB3621N-E8 SB4051-D5 sound bar mounts, soundbar bracket for Roku Smart Soundbar, Roku Streambar, Harman Kardon, Denon, Rca, Nakamichi and more soundbar mounts under tv
Sound bars mount under tv for LG SL5Y SN6Y SN7R SJ2 SN5Y SK1 SNC4R SN7Y SP8YA SKM5Y SLM5Y SNH5 SN8YG SLM4R SL4Y SLM3D SLM6Y SPD7Y SP2 SP7Y SL3D SJ4Y SK5 SK6 SK8 SK4Y SK5Y SK6Y SK7Y SK8Y SK5R SK6F SKM6Y SK4D SH2 SH4 SH5 SH7 SH8 SH7B SH4D SJ2 SJ6 SJ8 SJ8S, For Polk audio signa S2, S3; For Bose SoundTouch 300, Soundbar 500, Soundbar 700 mount; Klipsch, Insignia, Sony, Onn, Majority, Panasonic, Hisense Soundbar
*Tough: The soundbar wall mounts bracket made from tough metal materials to promise steady clinging, and product size as following: LxWxH=2*3.5*2.2 in. The max width that can fit the soundbar is 5.12″, weight capacity up to 30 lbs. as a universal mount it can be used to most of sound bars, Also this mount brackets can be mounted on any wall. And with extra 2 pcs sticky anti-slip strips you can be assured that your soundbar won’t fall off easily.
*With High Quality Package: We used the high quality blister to pack this mount which can protect the mount very well and with the blister package you can directly send it to your friend as a gift or use it own.