MicroKom Amplifier Return Channel + MATV 1e/1s “F”:…
KSh54,776.00
Class 4 line amplifier, designed for the distribution of multimedia services in small or medium-sized buildings. They are characterized by offering adjustments through insertable jumpers in both the direct and return channels. The gain on the direct channel is 30/35dB, and the return channel can be passive or active (30dB).
Central line MicroKom (1GHz – Gain: 30/35dB)
Active/Passive Return Channel: 5-65MHz
Class 4 line amplifier, designed for the distribution of multimedia services in small or medium-sized buildings. They are characterized by offering adjustments through insertable jumpers in both the direct and return channels.
The gain on the direct channel is 30/35dB, and the return channel can be passive or active (28dB).
The forward channel up to 1220MHz makes it DOCSIS 3.1 compliant.
Highlights
Configurable forward and return channel gain
Direct and return channel attenuation and equalization settings
Integrated, high-efficiency, low-consumption switching power supply
Characteristic
High power output
Test input and output (-20dB)
High armored chassis, made of Zamak
Specifications
Direct Channel
Frequency range MHz 85…1220
Gain dB 35
Deviation Nominal value ?1
flatness ?1.5
Input Attenuator (2 dB steps) 0…18
Interstage attenuator 0/5
Input Equalizer (2 dB steps) 0…18
Interstage equalizer 0/6
noise figure 7
Level
output DIN 45004B dB?V 124
NCSO (42 Channels)
60dB 105
CTB (42 channels)
60dB 105
return loss dB >12
test taking -twenty
return channel
Frequency range MHz 5…65
Active/Passive Gain dB 28/-1
Deviation Nominal value ?1
flatness ?1
Input Attenuator (2 dB steps) 0…18
Interstage equalizer 0/3/6
noise figure < 6
Strain
output DIN 45004B dB?V 118
64QAM 4TP (In
compliance with
the KBW standard) 115 (1.0e-8)
return loss dB >12
test taking -twenty
General
Consumption W 6.7
consumption max. total mA 115
mains voltage Vac/Hz 110 – 230 / 50-60
Work temperature ?C -10?+45
Electrostatic discharge protection (EN61000-4-2) kV 8
protection class class II isolation
protection index IP twenty
RF connectors Type F-female
Related products
-
DTKom broadband multiband amplifier 5 inputs:…
KSh79,264.00Add to cartHigh-power multiband amplifier with multiple controls on the front end, which design uses components that minimize the total noise figure. Equipped with 5 inputs (FM-BIII-21…32-36…48-UHF). The UHF band is divided in 2 of the inputs, which is useful in two-repeater reception installations since it allows an appropriate filtering of the channels for each of them.
Equipped with LTE700 filtering.
RED compliant
Highlights
Separate amplification minimizes intermodulation between bands and provides high output levels
Designed using Push-Pull technology, which guarantees levels in the 123 dB?V range for terrestrial signals.
Includes a high-performance low-power consumption switch-mode power supply
High-screening Zamak chassis The design facilitates appropriate cooling
Features
Switch for pre-amplifier or BOSS system powering
Switched configurable gain (high/low), and high output level
Intuitive front cover, including adjustments and block diagram
Output signal LED indicator
Specifications
Bands UHF BV BIV BIII FM
Frequency margin MHz 470 … 694 590… 694
(Ch36…48) 470 … 566
(Ch21…32) 174 … 370 88 … 108
Gain 0 dB 42 41(1) 41(2) 42 25
10 32 31(1) 31(2) 32 25
Gain margin (Manual)
0 … 20 (Manual)
0 … 20 (Manual)
0 … 20 (Manual)
0 … 20 (Manual)
0 … 20
Max. output level IMD3 (2 tones,-35 dB) dB?V
(dBmV) 125 (65)
DIN 45004B 123 (63)
IMD3 (2 tones,-60 dB) 120 (60)
IMD2 (2 tones,-60 dB) – – – 122 (62) –
Noise figure dB 10 10 10 5 6
Test -20
Powering inputs V= 12
Max. curent inputs mA 50
Mains voltage /frequency V~ / Hz 120 … 230 / 50-60
Total AC consumption OFF W / mA 5,8 / 120
ON W / mA 9,6 / 180
Protection level IP 20
Operating temperature range ?C (?F) -5 … +45 (23 … 113) -
Add to cartConfigurable headend multiband amplifier for MATV systems with separate amplification that guarantees the absence of intermodulation among inputs. Equipped with 5 inputs: FM-VHF-UHF-21…32-34….48. The UHF band is divided in 2 of the inputs, which is useful in two-repeater reception installations since it allows an appropriate filtering of the channels for each of them.
-
IF launch amplifier 2 IF inputs + MATV Televes
KSh62,412.00Add to cartMATV launch amplifiers, designed for small and medium size distribution networks. To be used as MATV headend. Featuring a Low/High gain switch guaranteeing a wide dynamic margin with low noise figure.
-
Add to cartConfigurable headend amplifier for SMATV systems with separate amplification that guarantees the absence of intermodulation between inputs. It consists of 4 inputs: FM-VHF-UHF-FI, the VHF and UHF ones have two selectable gain margins while the FM input has a single amplifier stage.
-
Add to cartHigh-power multiband amplifier with multiple controls on the front end, which design uses components that minimize the total noise figure. Equipped with 3 inputs (FM-BIII-UHF).
Equipped with LTE700 Ready filtering.
RED compliant
Highlights
Separate amplification minimizes intermodulation between bands and provides high output levels
Designed using Push-Pull technology, which guarantees levels in the 123 dB?V range for terrestrial signals.
Includes a high-performance low-power consumption switch-mode power supply
High-screening Zamak chassis The design facilitates appropriate cooling
Features
Switch for pre-amplifier or BOSS system powering
Switched configurable gain (high/low), and high output level
Intuitive front cover, including adjustments and block diagram
Output signal LED indicator
Specifications
Bands UHF BIII FM
Frequency margin Mhz 470 … 694 174 … 370 88 … 108
Gain 0 dB 42 42 25
10 32 32 25
Gain margin (Manual)
0 … 20 (Manual)
0 … 20 (Manual)
0 … 20
Max. output level IMD3 (2 tones,-35 dB) dB?V (dBmV) 125 (65)
DIN 45004B 123 (63)
IMD3 (2 tones,-60 dB) 120 (60)
IMD2 (2 tones,-60 dB) – 122 (62) –
Noise figure dB 5 5 6
Test -20
Powering inputs V= 12
Max. current inputs mA 50
Mains voltage / frequency V~ / Hz 120 … 230 / 50-60
Total AC consumption OFF W / mA 5,8 / 120
ON W / mA 8,2 / 157
Protection level IP 20
Operating temperature range ?C (?F) -5 … +45 (23 … 113)
Reviews
There are no reviews yet.