Outdoor Optical Fiber Forward path Receiver + RF Amplifier…
KSh223,762.00
Optical node intended for FTTB (Fiber-To-The-Building) and FTTC (Fiber-To-The-Curve)
Optical node intended for FTTB (Fiber-To-The-Building) and FTTC (Fiber-To-The-Curve), a communications architecture in which the final connection to the user is performed by coaxial cable.?
Direct channel optical receiver and return channel optical transmitter.
A scale composed by 7 LEDs gives information about the optical input power.
An additional LED indicates the correct optical output power for the return channel.
It features separate stages for MATV and SAT IF signals with equalization and attenuation controls.
High RF output level.
An output test avoids service disconnection to user during maintenace operations.
Specs
References 2310
Direct Channel Optical Stage
Wave length nm 1200-1600
Input Margin dBm -5…+2
Maximun input level +3 ?
? RF Stage
Bandwidth MHz 87-862 950-2150
Interstage atennuator dB 0-20
Equalizator 0-15 0-10
Maximum output level 42CH Cenelec dB?V 104 –
Maximum output level DIN VDE0855/12 – 120
Test Output dB -25 -27
Return Channel Optical Stage
Laser type Fabry-Perot (Class 1M
Wave lenght Nm 1310
Output power dBm 3
? RF Stage
Bandwidth MHz 5-65
Maximum input level dBm 90
General
Mains voltage Vac 196-264
Consumption mA 36
Protection Index IP 61
Related products
-
Read moreAlcad PT-320 – Serie 907: If user acces point, if splitter 3 out.
User access point for terrestrial and satellite TV. It has two inputs and three outputs. One of the inputs remains connected to the outputs while the other input is permanently connected to a 75 ohm load. Designed for the 5-2,400 MHz frequency range. Also available in 2-, 4-, 5-, 6- and 8-output models.
Applications
Designed for TV installations with two coaxial cables in which distribution to the houses is performed with a single coaxial cable. The signal which is distributed to the house is selected by changing the connections of the coaxial cables at the user access point.
Characteristics
Voltage blockage in the output connectors. No return path. Shielded zamak and metal plate chassis. F type connectors in machined zamak which form part of the chassis. Reduced dimensions.
Downloads
Technical specification
Technical specification
-
Blind cover T.0X Televes
KSh3,634.00Add to cartT.0X Blind embellishing plate. 50mm – 5U. Front panel in white in 19″ format. Televes 5673
-
Read moreAlcad PT-420 – Serie 907: If user acces point, if splitter 4 out.
User access point for terrestrial and satellite TV. It has two inputs and four outputs. One of the inputs remains connected to the outputs while the other input is permanently connected to a 75 ohm load. Designed for the 5-2,400 MHz frequency range. Also available in 2-, 3-, 5-, 6- and 8-output models.
Applications
Designed for TV installations with two coaxial cables in which distribution to the houses is performed with a single coaxial cable. The signal which is distributed to the house is selected by changing the connections of the coaxial cables at the user access point.
Characteristics
Voltage blockage in the output connectors. No return path. Shielded zamak and metal plate chassis. F type connectors in machined zamak which form part of the chassis. Reduced dimensions.
Downloads
Technical specification
Technical specification
Catalogues
CATALOGUE_ALCAD_EN_MULTIMEDIA_TV pdf 5.42 MB
Technical specifications
-
-
Add to cartTelephone distribution box. Includes telephony frame 10 strips of 10 pairs. Includes inner frame for clamping strips. With door and key.
TECHNICAL SPECIFICATIONS
Reviews
There are no reviews yet.