Welcome to Alcatraz Dish Network Services!
SUPPORT 24/7/365!? +254720548999
SUPPORT 24/7/365!? +254720548999

Category: Power Supplies

Power Supplies

Showing all 26 results

  • Device that converts alternating current into direct current to feed H30/H30FLEX meters. Several plugs are included for its use in any electrical installation.

    Add to cart
  • 24 V-1.6 A power supply unit for a single T.0X module. Televes 562802

    Add to cart
  • High power switched-mode PSU, flyback type, high efficiency (> 85%) and capable of delivering 5A at 24V (120W).

    Add to cart
  • 24V (130mA) home power supply, which sends power through the input coaxial cable, allowing the TV signal to pass through. It is sandwiched in the installation to power mast amplifiers or a BOSS system. In addition, it incorporates a distributor to generate two outputs.?It also serves to feed MRD from antennas. Blister

    Add to cart
  • IKUSI APB-112-M. Power supplies ?micro? APB series. Switch mode power supplies for mast amplifiers. Smaller size with terrestrial and satellite inputs.

    Features
    The smallest on the market.
    It allows installation in any junction box.
    Optimum power consumption. Low power switch mode.
    Mounting without tools.
    1RF input connector + DC output port / 1 or 2 RF outputs ports.
    Technical specifications
    REF. 3436
    Regulation type switch mode
    Output 1
    Mains voltage (50 Hz) VAC 100 – 240
    Output voltage VDC +12 (?5%)
    Output voltage mA 200
    Frequency range MHz 47 – 2400
    RF insertion loss dB ? 1.5
    Current pass through mA 300
    Efficiency % >70
    Dimensions mm 50 x 50 x 25

    ?

    MANUAL/DATASHEET

    Add to cart
  • Power supply micro size 24 V 100 mA, 2 outputs

    Features
    Micro size
    24 Volts
    2 RF outputs
    It allows to install it in any register box
    The smallest in the market.
    It integrates perfectly in a box of derivation of 80×80 mm.
    Optimal energy consumption thanks to the low power switched power supply.
    Ease of connection and assembly thanks to an innovative wall fixing system.
    Built-in bubble level for perfect placement.
    No need to drill the wall thanks to the adhesive fixation.
    1 RF input connector + DC output to the input 2 RF outputs.
    LED indicator operating indicator.
    Specifications
    MODEL?? APB-224-M
    REF.? 3437
    EAN code? 8435136434375
    Type of regulation? switched?
    Outputs?? 2
    Mains voltage (50 Hz) VAC 100 – 240
    Output voltage VDC +24 (?5%)
    Max current of departure mA 100
    Frequency band MHz 47 – 862
    Insertion attenuation dB ? 4
    Performance % >70
    Dimensions mm 50 x 50 x 25

    Add to cart
  • Power Supplies of ClassA Headend, 12VDC, 9A.

    Main features
    The CFP-900 power supply has been designed to supply enough power to most ClassA headend configurations.
    Its high output current capacity (9A) means it must be used with a high current plug bridge, supplied with all IKUSI ClassA devices and vital in installations that demand more than 5A (see picture).
    The CFP-900 power supply also has all the necessary auxiliary outputs to supply external elements like preamplifiers and LNBs.
    Other differentiating characteristics are its high efficiency and the fact that it implements a power factor corrector to optimize mains consumption.
    2 banana jumpers, 50 cm length, are supplied to connect the appropriate outputs of the power supply to 1 or 2 ClassA receivers for line powering a terrestrial preamplifier or LNB.
    Specs
    Model CFP-900
    Ref. 4492
    Regulation type switch mode
    Mains supply voltage (50/60 Hz) VAC 100 – 240
    Outputs +12V (9A) ClassA modules
    +24V (60mA) for mast preamplifiers
    +18V (300mA) for LNB
    +18V / 22kHz (300mA) for LNB
    +13V (300mA) for LNB
    +13V / 22kHz (300mA) for LNB
    Max total current for +24, +18 and +13V mA 700
    Efficiency % > 85
    Operating temperature ?C -10 … +55
    Mains lead Class II IEC 320/C7 (incluided)
    Dimensions mm 230 x 195 x 48
    Additional info

    Data Sheet

    Installation Manual

    Add to cart
  • Ikusi IFC-215 shielded F current injector

    Shielded
    1A/24Vdc.
    Bandwidth 10-2150 Mhz

    Add to cart
  • IKUSI PSU-150. Power Supply module. Switch mode power supply to feed HTI product range.

    Features
    High power switched-mode power supply with high efficiency.
    The current distribution is done through the BACK-500 base plate, without plug bridges.
    Its design allows to use the power supply in installations with 2 power supplies, working in redundant way.
    Technical specifications
    REF. 3865
    Regulation type switched-mode
    Mains supply voltage (50/60 Hz) VAC 100 – 240
    Output voltage V +24
    Max current A 6,5
    Efficiency ? > 89
    Operating temperature ?C -10 … +45
    Mains lead ? Class I IEC 320/C13 (not included)
    Dimensions mm 230 x 190 x 33

    ?

    MANUAL/DATASHEET

    Add to cart
  • IKUSI SZB-214. Power supply 4,5A.

    Features
    Electrical safety protection level: Class II. Mains lead with bipolar plug.
    Output voltage is additionally available from two auxiliar jacks, for connection to one or two power inserters (mast-head amplifier remote powering). Banana jumper supplied.
    Technical specifications
    REF. 2250
    Regulation type switch mode
    Mains supply voltage (50/60 Hz) VAC 185 – 264
    Output voltage VDC +24 (?)
    Max output current A 4.5

    ?

    MANUAL/DATASHEET

    Add to cart
  • High efficiency stabilized power supply.

    Characteristics
    Number of outputs: 2
    Output voltage: 24Vdc stabilized
    Output current: 150mA
    Short circuit protection
    LED power indicator
    Wall or DIN rail mounting with clips (included)
    Dimensions: 95 x 76 x 35mm
    Specifications
    Departures two
    Lost 4 – 5 dB
    Rejection between outputs 10 dB

    Output voltage

    stable

    24 V DC
    Feeding 230 V ~ ? 10%, 50 Hz / 4.6W
    Efficiency level SAW
    Output current 150 mA

    Security

    Protection against overload and short circuit

    Yes
    Dimensions 95 x 76 x 35 mm

    Add to cart
  • Nevoswitch Power Suply 12V – 0,8A – 230Vac

    Add to cart
  • IFP 102 Power supply with LTE filter. The Triax IFP 102 are indoor Power Supplies for Masthead amplifiers also providing a ?last defence? filter function against local LTE/4G interference.
    Features
    Easy installation, plugs into any EU VDE Mains wall outlet.
    F-connectors for maximum shielding.
    Green LED indication of Mains power.
    White indoor housing. LTE filter 6-23 dB, (790-821MHz).
    High current load possible, 12 VDC, 100mA. For Mains Power, 230 VAC, 50/60 Hz.
    Specifications
    ORDER INFORMATION
    EAN Number 5702663701090
    FREQUENCY
    Frequency range 5-790 MHz
    LOSS
    Rejection @ 821 MHz (LTE D6) >23.0 dB
    Through loss 6.0 dB
    ELECTRICAL
    Impedance 75 ?
    OPERATIONAL
    AC Supply voltage 230 VAC
    PSU output DC voltage 12 VDC
    PSU output max. DC current 100 mA
    CONNECTORS
    Connector Type F-female
    Number of outputs 2
    MECHANICAL
    Product Depth 40 mm
    Packaging Depth 0,203 m
    Packaging Height 0,050 m
    Total Weight 0,350 kg
    Packaging Width 0,092 m
    Net Weight 0,304 kg
    Tara Weight 0,046 kg
    Packaging Volume 0,001 m3
    Product Width 140 mm
    Product Height 70 mm

    ?

    Add to cart
  • 24V (130mA) home power supply, which sends power through the input coaxial cable, allowing the TV signal to pass through. It is sandwiched in the installation to power mast amplifiers or a BOSS system. In addition, it incorporates a distributor to generate two outputs.

    Add to cart
  • TELEVES 830209 is the CHRONOS HD DIGITAL SIGNAGE STB PSU, for use with every Televes Digital Signage CHRONOS STB.

    Add to cart
  • Device that converts alternating current into direct current to feed the multiswitch. Televes 732802

    Add to cart
  • Power supply for PROFILER 66xx series control panels

    Output voltage: 15Vdc
    Output current: 2A

    * Only valid for PROFILER series (66xx)

    * Not valid for REVOLUTION series (67xx)

    Add to cart
  • Power supply for PROFINO/REVOLUTION control panels.

    Add to cart
  • High power switched-mode PSU, flyback type, high efficiency (> 85%) and capable of delivering 2.5A at 24V (60W), Equipped with two outputs monitored by LEDs to indicate the status of the voltage delivered, Detects either overload or short-circuit, It offers protection against output voltage variation.

    Add to cart
  • New power supply Televes model 5795 that replaces the previous model 5495 improving its performance.

    Add to cart
  • DC power cable for TAS series amplifiers of Triax
    Length of 50cm
    Complatible with Televes, Ikusi, Alcad, Fagor, Fracarro, Franja, Irco and Hirschmann.

    Add to cart
  • Kit consisting of mast amplifier TLC series and power supply series ALF 280 24Vdc and 180 mA. The mast amplifiers of the TLC series have 1 UHF input and 1 output and have an LTE filter with 700 MHz cut-off (LTE / 4G).

    Characteristics
    20 dB gain
    Gain regulation 0 – 15 dB
    Output level of 103 dBuV.
    700 MHz LTE protection
    Caja de pl?stico fabricada con materiales resistentes a los agentes atmosf?ricos.
    Led indicador de funcionamiento.
    Ganancia ajustable (0 – 15 dB).
    Baja figura de ruido.
    Alimentaci?n de 12 a 24 Vcd.
    Simple y f?cil montaje en m?stil o pared.
    Specifications
    FREQUENCY ?
    [Input 1] – channels 21…60
    [Input 1] – frequency 470…790 MHz
    LTE protection 700
    GAIN
    [Input 1] – gain 5…20 dB
    [Input 1] – noise figure 2.5 dB
    LOSS OF RETURN
    Return losses >10.0 dB
    ELECTRICAL DATA
    Impedance 75 ?
    OPERATIONAL
    DC Working voltage 12…24 VDC
    External PSU Included
    Consumption of tension 45 mA
    CONNECTORS
    Connector Type F-female
    Number of?outputs 1
    PACKING DETAILS
    Depth Packing 0,058 m
    Packing height 0,176 m
    Total Weight 0,740 kg
    Width Packing 0,228 m
    Net weight 0,640 kg
    Packaging quantity 1
    Tara weight 0,100 kg
    Volume Packaging 0,002 m3

    Add to cart
  • 700MHz LTE LP filter CH48 (TLP 148).

    Features
    LTE Filters prevent 4G mobile services causing interference with terrestrial TV signals
    Specifications
    ORDER INFORMATION
    EAN Number 5702663141773
    CHARACTERISTICS
    Type LTE filter
    FREQUENCY
    Input 1 – frequency 5…694 MHz
    Input 1 – stop channel 48
    LTE protection @ 700Mhz
    LOSS
    Input 1 – through loss 1.0…3.0 dB
    Rejection @ 730 MHz (Ch. 53) > 50.0 dB
    RETURN LOSS
    Return loss (in-out) 5-40 MHz 20 dB
    Return loss (in-out) 40-1000 MHz ? 18dB -1.5dB/Oct, min. 10dB dB
    ELECTRICAL
    Impedance 75 ?
    Impedance 75 ?
    OPERATIONAL
    DC Passthrough Yes (30VDC / 1A)
    CONNECTORS
    Number of inputs 1
    Number of outputs 1
    MECHANICAL
    Colour Black
    Packaging Height 0,060 m
    Packaging Width 0,112 m
    Packaging Depth 0,118 m
    Packaging Volume 0,001 m3
    Net Weight 0,175 kg
    Tara Weight 0,035 kg
    Total Weight 0,210 kg

    Add to cart