Profilers Power Supply, SMPS 15V 2.4A Johansson
KSh3,760.00
Power supply for PROFILER 66xx series control panels
Output voltage: 15Vdc
Output current: 2A
* Only valid for PROFILER series (66xx)
* Not valid for REVOLUTION series (67xx)
Related products
-
Ikusi CFP-900 Power Supplies of ClassA Headend
KSh48,418.00Add to cartPower Supplies of ClassA Headend, 12VDC, 9A.
Main features
The CFP-900 power supply has been designed to supply enough power to most ClassA headend configurations.
Its high output current capacity (9A) means it must be used with a high current plug bridge, supplied with all IKUSI ClassA devices and vital in installations that demand more than 5A (see picture).
The CFP-900 power supply also has all the necessary auxiliary outputs to supply external elements like preamplifiers and LNBs.
Other differentiating characteristics are its high efficiency and the fact that it implements a power factor corrector to optimize mains consumption.
2 banana jumpers, 50 cm length, are supplied to connect the appropriate outputs of the power supply to 1 or 2 ClassA receivers for line powering a terrestrial preamplifier or LNB.
Specs
Model CFP-900
Ref. 4492
Regulation type switch mode
Mains supply voltage (50/60 Hz) VAC 100 – 240
Outputs +12V (9A) ClassA modules
+24V (60mA) for mast preamplifiers
+18V (300mA) for LNB
+18V / 22kHz (300mA) for LNB
+13V (300mA) for LNB
+13V / 22kHz (300mA) for LNB
Max total current for +24, +18 and +13V mA 700
Efficiency % > 85
Operating temperature **C -10 … +55
Mains lead Class II IEC 320/C7 (incluided)
Dimensions mm 230 x 195 x 48
Additional infoData Sheet
Installation Manual
-
alimentation for T0X Televes
KSh74,896.00Add to cartHigh power switched-mode PSU, flyback type, high efficiency (> 85%) and capable of delivering 5A at 24V (120W).
-
-
Triax TAS 008 Power cable 50cm
KSh596.00Add to cartDC power cable for TAS series amplifiers of Triax
Length of 50cm
Complatible with Televes, Ikusi, Alcad, Fagor, Fracarro, Franja, Irco and Hirschmann. -
Add to cart24V (130mA) home power supply, which sends power through the input coaxial cable, allowing the TV signal to pass through. It is sandwiched in the installation to power mast amplifiers or a BOSS system. In addition, it incorporates a distributor to generate two outputs.**It also serves to feed MRD from antennas. Blister
Reviews
There are no reviews yet.