Category: Support Antenna
Support Antenna
Showing 121–180 of 199 results
-
Linear Amplifier Johansson
KSh3,288.00Add to cartLinear amplifier TER, 1 input, 1 output, Frequency: 470-862MHz, Gain: 15dB
Specifications
Reference 7317
Banda Frecuencia Figura ruido Max. Nivel Salida Consumo Rango voltaje alimentaci?n Dimensiones
– MHz dB dB dB?V mA V mm
UHF C 21- 69 470-862 15 2,0 102 20 5 a 24 72 x 22 x 17 -
Lower section 3m turret series 180 RPR Televes
KSh57,854.00 -
Lower section 3m turret series 360 RPR Televes
KSh130,810.00 -
-
Add to cartLower section of 3 m for the formation of a tower of the 550 XL series. The section is painted in red (RAL 3020). Being a tilting section, it requires the installation of guy wires.
-
Add to cartLower section of 3m for the formation of a tower of the 550 series. The section is painted in red (RAL 3020). Being a swinging section, requires the installation of winds. Maximum height of the Tower 550: 140m (according to calculation conditions). The hot galvanized surface treatment offers greater durability in adverse corrosion conditions. Televes 313902
-
Add to cartLower section of 3m for the formation of a tower of the 180 series. Being a tilting section, requires the installation of winds. Hot galvanized, for the formation of a tower of the 180 series. Anchoring system by means of fittings. Ease and speed in assembly. Robotic welding. Maximum height of the Tower 180: 26.5m (according to calculation conditions). Gray. Televes 303201
-
Add to cartLower section of 3m for the formation of a tower of the 360 series. Being a tilting section, requires the installation of winds. Hot galvanized, for the formation of a tower of the 360 series. Anchoring system by means of fittings. Ease and speed in assembly. Robotic welding. Maximum height of the Tower 360: 57m (according to calculation conditions). Red. Televes 308604
-
Add to cartLower section of 3m for the formation of a tower of the 360 series. Being a tilting section, requires the installation of winds. Hot galvanized, for the formation of a tower of the 360 series. Anchoring system by means of fittings. Ease and speed in assembly. Robotic welding. Maximum height of the Tower 360: 57m (according to calculation conditions). Gray. Televes 308603
-
Add to cartLower section of 3m for the formation of a tower of the 360 series. Being a tilting section, requires the installation of winds. Hot galvanized, for the formation of a tower of the 360 series. Anchoring system by means of fittings. Ease and speed in assembly. Robotic welding. Maximum height of the Tower 360: 57m (according to calculation conditions). White. Televes 308605
-
Add to cartLower section of 3m for the formation of a tower of the 450 series. Being a tilting section, requires the installation of winds. Hot galvanized, for the formation of a tower of the 450 series. Anchoring system by means of fittings. Ease and speed in assembly. Robotic welding. Maximum height of the Tower 450: 90m (according to calculation conditions). Red. Televes 313001
-
-
Mast stand for recessed wall in I 350mm Televes
KSh1,914.00 -
Mast support for bolted L-wall RPR 128mm Televes
KSh1,198.00 -
Middle Section Tower 180 Zinc+White 3m Televes
KSh70,436.00Add to cartThis product is not sent to some countries or areas, if the cart does not have available carriers, you can contact us here
3m Middle section, Zinc + Paint for the formation of a 180 series tower.
The section is painted in white.
Features
Anchoring system with union nuts
Easy and quick mounting
Fully automated soldering
180 tower maximum height: 26.5m (as per calculation conditions)
Zinc coating + colour paint: oven-lacquering with polyester electrostatic powder
Finished in white color
Specifications
Surface facing the wind 0.236 m2 x 1.2 coef. = 0.283 m2 -
Middle section Tower 450 Galvanized hot 3m Red Televes
KSh260,150.00Add to cartMiddle section of 3m for the formation of a tower of the 450 series. Hot galvanized, for the formation of a tower of the 450 series. Anchoring system by means of fittings. Ease and speed in assembly. Robotic welding. Maximum height of the Tower 450: 90m (according to calculation conditions). Red. Televes 313102
-
Middle section Tower 450 Galvanized hot 3m White Televes
KSh260,150.00Add to cartMiddle section of 3m for the formation of a tower of the 450 series. Hot galvanized, for the formation of a tower of the 450 series. Anchoring system by means of fittings. Ease and speed in assembly. Robotic welding. Maximum height of the Tower 450: 90m (according to calculation conditions). White. Televes 313103
-
Add to cartPivoting embedded base for the anchoring of a 360 range guy-wired braced tower. Highlights Anchoring system with union nuts Fully automated soldering 360 tower maximum height: 57m (as per calculation conditions) Features Pivoting: guy-wire system installation Specifications Reference ?308801 ?Description Pivoting embedded base 360. Manufacturing (1) F626 steel plate (S 235) 12 mm thick. Re …
Pivoting embedded base Tower 360 Hot-Dip Galvanizing TelevesRead More
-
Plate/flange RPR ?46 mm + wind hook Televes
KSh1,618.00 -
Add to cartFlush base for flush mounting, for the anchoring of a braced tower of the 180 series. Hot dip galvanized. Anchoring system by means of fittings. Ease and speed in assembly. Robotic welding. Maximum height of the Tower 180: 26.5m (according to calculation conditions). Rocker: installation with wind system. Televes 304801
-
Recessed tilting base for turret series 450 Televes
KSh105,752.00 -
Add to cartFlush-mounted flush-mounted base, hot-dip galvanized, for anchoring a braced tower of the 450 series. It is possible to avoid concrete if it is installed screwed onto a surface plate (ref 312901). Televes 313401
-
-
Add to cart3m reinforced middle section for the erection of a 450 series tower. Reinforced sections provide higher robustness, since the tubes have higher diameter and thickness; ideal for complex scenarios. Televes 313201
-
-
-
Screw U for clamp ? 25-45mm Televes
KSh634.00Add to cartScrew U for clamp ? 25-45mm. Made of steel and highly resistant to corrosion, thanks to its dual treatment of galvanized and reactive sealing (RPR). Televes 4952
-
Solid base (180SE) RPR Televes
KSh6,176.00 -
Add to cartStraight support with U-shaped profile for the installation of mast on the wall (screwed), with a separation of 300mm. They are installed in pairs to secure the mast at two points. Made of steel and highly resistant to corrosion, thanks to its dual treatment of galvanized and reactive sealing (RPR). Televes 240410
-
Add to cartSupport type “Y” with two positions (screwed), for installation of antennas on wall with a separation of 473mm, or on ground with a height of 720mm. The tube has ? 45mm and thickness 1.5mm. Manufactured in galvanized steel. Televes 719202
-
Add to cartTubular support type “inverted T” for installation of antennas in ground (screwed), with a height of 1m. The tube has ?48mm and thickness 2.9mm. Manufactured in hot galvanized steel, it offers an excellent resistance to corrosion that guarantees the longest weathering. Televes 757602
-
Support L RPR wall 284×194 / ?35×1.5mm
KSh2,400.00 -
Support L wall 380/350mm Televes
KSh6,728.00 -
Support L wall 500/450mm Televes
KSh8,346.00 -
Add to cartSuperficial installation plate on the ground, using stakes, without the need for concrete. Its function is to fix on it (by screwing) a tilting base of the 450 or 550 series (ref. 3134/01 and 3142/01). Characteristic Hot-dip galvanized surface treatment offers greater durability in adverse corrosion conditions Finished in gray
-
Surface plate, Hot-Dip Galvanizing 450XL and 550 towers…
KSh283,382.00Add to cartGround surface mount plate using pikes, no need for concrete. Used for bolting on it a pivoting base from 450XL or 550 range (ref. 313412 and 3142xx).
Features
The hot-dip galvanizing surface treatment provides enhanced durability in adverse corrosion conditions
Grey finish -
Surface plate, Zinc + RCP 450 and 550 towers Televes
KSh149,454.00Add to cartGround surface mount plate using pikes, no need for concrete. Used for bolting on it a pivoting base from 450 or 550 range (ref. 3134/01 and 3142/01). Features Zinc coating + RCP Grey finish
-
Add to cartSteel mast holders are reinforced to support configurations of significant height (200m approx.) or subject to high loads and adverse weather conditions. Televes 313810
-
Add to cart0,5 m peak-shaped upper section to finish the erection of a 450 XL series tower. The section is painted red (RAL 3020).
-
Top section red color 3m turret series 450 Televes
KSh233,492.00 -
Top section Zinc+Red paint 3m turret serie 360 Televes
KSh163,824.00 -
Top section Zinc+White paint 3m turret serie 360 Televes
KSh163,824.00 -
Add to cart3m Transition section to adapt 450 and 550 range tower sections in order to build combined towers.?The section is painted red (RAL 3020). Televes 314101
-
-
Add to cartTLA 347 is a 2-way SAT Post / Booster amplifier for 2-wire SAT-IF distribution plants.
Additionally, the amplifier offers a passive return path through SAT1 and SAT2. the ability to obtain a terrestrial signal (Terr.) through SAT1.
Gain and pending for both SAT and Terr. It can be adjusted on each of the transmission paths separately.
The terrestrial frequency range is limited to 7694 MHz to reject LTE 700 interference.
Specifications
ORDER INFORMATION
EAN Number 5702663003835
CHARACTERISTICS
Type Amplifier – multiband
Return Path 5 … 30 MHz
Max. output level SAT @ -35 dB IMD3 120 dB?V
Max. Output level @ -60 dB IMD 116 dB?V
FREQUENCY
Frequency range 5 … 2150 MHz
Frequency range SAT 950 … 2150 MHz
Frequency range TER 5 … 694 MHz
GAIN
Gain – TER 38 dB (Ret: -4) dB
Gain – Satellite 1 [950-2150 MHz] 38 dB
Noise figure SAT 8 dB
Noise figure TER 6 dB
Slope 0 … 15/16 dB
LOSS
Attenuation 0 … 20 dB
RETURN LOSS
Return Loss IN SAT: 10.0 / TER: 8.0 / RET: 8.0 dB
Return Loss OUT SAT: 8.0 / TER: 8.0 / RET: 8.0 dB
ELECTRICAL
Impedance 75 ?
OPERATIONAL
AC Supply voltage 180 … 240/47 … 63Hz VAC
CONNECTORS
Connector Type F-female
Number of inputs 2x SAT / 1x TER / RP
Number of outputs 2 SAT1 + TER + RP / SAT2 + TER + RP, 2x (30dB TP)
MECHANICAL
Packing QTY 1
Net Weight 0.950 kg
Total Weight 0.950 kg -
Triax TMSA 13 Line Amplifier
KSh43,414.00Add to cartTMSA 13 LINE AMP
The TMSA 13 Line Amp, with 13 inputs and 20dB gain, compensates for the cable loss in your designed multiswitch systems.
Powered directly via the DC input, or line powered via any Sat port.
Specifications
ELECTRICAL
Impedance 75 ?CONNECTORS
Connector Type F-female
Connector DC F-female
Number of trunk inputs 13
Number of trunk outputs 13
Colorcoding @IF/TER inputs VL=Black, VH=Red, HL=Green, HH=Yellow, White=TERCHARACTERISTICS
Input polarity gain control TER 0?10 dB
Input polarity gain control SAT 0?10 dB
Max. output level SAT @ -35 dB IMD3 110 dB?V
Max. output level TER @ -60dB IMD3 105 dB?V
LNB current max. 3000 mAFREQUENCY RANGE
Frequency range TER Active: 47?694 – 47…862 / Passive: 5…862 MHz
Frequency range SAT 950?2200 MHzGAIN
Gain – SAT 20 ? 2dB @0dB slope or 16?22 ? 2dB @6dB slope dB
Gain – TER 15 ? 2 dBLOSS
Insertion loss – TER 5 dBISOLATION
Isolation SAT to TER > 30 dB
Isolation cross polarisation H/V > 30 dBRETURN LOSS
Return loss SAT > 10 dBOPERATIONAL
LINE power DC voltage (max.) 15?20 VDC
LINE power current (max.) 2000 mA
PSU output DC voltage 18 VDC
ESD protection 4KV inputs & sub outputs
DC Current consumption 600mA max. @18V DC mA
PSU/adapter Art number 318162, 318163, 318164
Control LEDs Green LED (Power)
Temperature – operating -20?+50 ?CMECHANICAL
Dimensions product (H x D x W) 260 x 65 x 175 mm
Packing QTY 1
Product Height 175 mm
Product Width 255 mm
Product Depth 65 mm
Packaging Height 0.070 m
Packaging Width 0.280 m
Packaging Depth 0.182 m
Packaging Volume 0.000 m3
Net Weight 1.038 kg
Tara Weight 0.151 kg
Total Weight 1.189 kgWebsite Availability
Website sort order 61855 -
Triax TMSA 17 Line Amplifier
KSh57,354.00Add to cartTMSA 17 LINE AMP
The TMSA 17 Line Amp, with 17 inputs and 20dB gain, compensates for the cable loss in your designed multiswitch systems.
Powered directly via the DC input, or line powered via any Sat port.
Specifications
ELECTRICAL
Impedance 75 ?CONNECTORS
Connector Type F-female
Connector DC F-female
Number of trunk inputs 17
Number of trunk outputs 17
Colorcoding @IF/TER inputs VL=Black, VH=Red, HL=Green, HH=Yellow, White=TERCHARACTERISTICS
Input polarity gain control TER 0?10 dB
Input polarity gain control SAT 0?10 dB
Max. output level SAT @ -35 dB IMD3 110 dB?V
Max. output level TER @ -60dB IMD3 105 dB?V
LNB current max. 3000 mAFREQUENCY RANGE
Frequency range TER Active: 47?694 – 47…862 / Passive: 5…862 MHz
Frequency range SAT 950?2200 MHzGAIN
Gain – SAT 20 ? 2dB @0dB slope or 16?22 ? 2dB @6dB slope dB
Gain – TER 15 ? 2 dBLOSS
Insertion loss – TER 5 dBISOLATION
Isolation SAT to TER > 30 dB
Isolation cross polarisation H/V > 30 dBRETURN LOSS
Return loss SAT > 10 dBOPERATIONAL
LINE power DC voltage (max.) 15?20 VDC
LINE power current (max.) 2000 mA
PSU output DC voltage 18 VDC
ESD protection 4KV inputs & sub outputs
DC Current consumption 800mA max. @18V DC mA
PSU/adapter Art number 318162, 318163, 318164
Control LEDs Green LED (Power)
Temperature – operating -20?+50 ?CMECHANICAL
Dimensions product (H x D x W) 260 x 65 x 175 mm
Packing QTY 1
Product Height 175 mm
Product Width 255 mm
Product Depth 65 mm
Packaging Height 0.070 m
Packaging Width 0.280 m
Packaging Depth 0.182 m
Packaging Volume 0.000 m3
Net Weight 1.158 kg
Tara Weight 0.151 kg
Total Weight 1.309 kgWebsite Availability
Website sort order 61854 -
Tubular mast support for chimney ?30mm Televes
KSh6,530.00 -
-
-
-
-
Add to cartGalvanized “Y” support, for wall or floor installation (551x439mm or 620x247mm / ? 60mm x Thickness 1.5mm). Ideal for QSD parabolas.
-
Upper section 1.25m turret series 180 SE RPR Televes
KSh24,956.00Add to cartTower series 180 SE 1.25m built in stainless steel RPR. Maximum height is 7.5 m, including 3m mast. Televes 3014
-
Add to cartThis product is not sent to some countries or areas, if the cart does not have available carriers, you can contact us here
3m upper section, Zinc + Paint for the formation of a 180 series tower. ?max mast 46mm
The section is painted in white.
Characteristics
Anchoring system with union nuts
Easy and quick mounting
Fully automated soldering
180 tower maximum height: 26.5m (as per calculation conditions)
Zinc coating + colour paint: oven-lacquering with polyester electrostatic powder
Finished in white color
Specifications
Surface facing the wind 0.227 m2 x 1.2 coef. = 0.272 m2 -
Upper section 3m turret series 180 RPR Televes
KSh57,854.00 -
Upper section 3m turret series 360 RPR Televes
KSh130,810.00 -
Add to cartThis product is not sent to some countries or areas, if the cart does not have available carriers, you can contact us here Upper section of 3 m for the formation of a tower of the 550 XL series. The section is painted in red (RAL 3020). Stands out for Anchoring system by means of …
Upper Section 550XL Tower Reinforced G.C+ Red 3m (mast ?max…Read More
-
Add to cart3m upper section for the erection of a 360 series tower.?The section is painted red (RAL 3020). Televes 308504
-
Add to cart1 m upper section for the erection of a 450 XL series tower. The section is painted red (RAL 3020).
Popular Products
-
Dual Monitor Arm for 13-32 inch Screens up to 19.8 lbs Each - Monitor Mounts for 2 Monitors - Dual Computer Monitor Stand for Desk VESA 75x75 100x100 Adjustable Gas Spring Desk Mount Black
-
Dual Monitor Arm White for 13-32 inch Screens up to 19.8 lbs Each - Monitor Mounts for 2 Monitors - Dual Computer Monitor Stand for Desk VESA 75x75 100x100 Adjustable Gas Spring Desk Mount
-
Single Monitor Desk Mount for 13-34 inch Flat/Curved Screens up to 26.5 lbs - Adjustable Monitor Stand Full Motion Gas Spring Monitor Arm Single Monitor Mount Ultrawide Monitor Arm Black
-
ONKRON Dual Monitor Arm Desk Mount for Two 13-32 Inch Monitors up to 19 lbs Each - Gas Spring Monitor Arm Mount, VESA 75x75-100x100, Dual Monitor Stand for Desk/Dual Monitor Mount Desk Black
-
ONKRON Mobile TV Stand with Wheels Rolling TV Stand for 40-80 Inch LED LCD Flat or Curved Screen TVs up to 122 lbs - Height Adjustable TV Cart with Shelves - Portable TV Stand (TS2771) Black
Products
-
Dual Monitor Arm for 13-32 inch Screens up to 19.8 lbs Each - Monitor Mounts for 2 Monitors - Dual Computer Monitor Stand for Desk VESA 75x75 100x100 Adjustable Gas Spring Desk Mount Black
-
Dual Monitor Arm White for 13-32 inch Screens up to 19.8 lbs Each - Monitor Mounts for 2 Monitors - Dual Computer Monitor Stand for Desk VESA 75x75 100x100 Adjustable Gas Spring Desk Mount
-
Single Monitor Desk Mount for 13-34 inch Flat/Curved Screens up to 26.5 lbs - Adjustable Monitor Stand Full Motion Gas Spring Monitor Arm Single Monitor Mount Ultrawide Monitor Arm Black
-
ONKRON Dual Monitor Arm Desk Mount for Two 13-32 Inch Monitors up to 19 lbs Each - Gas Spring Monitor Arm Mount, VESA 75x75-100x100, Dual Monitor Stand for Desk/Dual Monitor Mount Desk Black
-
ONKRON Mobile TV Stand with Wheels Rolling TV Stand for 40-80 Inch LED LCD Flat or Curved Screen TVs up to 122 lbs - Height Adjustable TV Cart with Shelves - Portable TV Stand (TS2771) Black