Category: Centrals
Centrals
Showing all 46 results
-
Add to cartCentral Amplificadorra of ICT of two downspouts of Telev?s model DTKom 2 FI + MATV for terrestrial signal and of satellite with technology Power Doubling. Usual use is as re-amplification in ICT lines (typically in communities). Ease of installation and convenient access to settings, with a led indicator of input signal. Televes 5337
-
Add to cartMATV launch amplifiers, designed for small and medium size distribution networks. To be used as MATV headend. Featuring a Low/High gain switch guaranteeing a wide dynamic margin with low noise figure.
-
Add to cartMATV launch amplifiers, designed for small and medium size distribution networks. To be used as MATV headend. Featuring a Low/High gain switch guaranteeing a wide dynamic margin with low noise figure.
-
Add to cartConfigurable headend amplifier for SMATV systems with separate amplification that guarantees the absence of intermodulation between inputs. It consists of 4 inputs: FM-VHF-UHF-FI, the VHF and UHF ones have two selectable gain margins while the FM input has a single amplifier stage.
-
Add to cartConfigurable headend amplifier for SMATV systems with separate amplification that guarantees the absence of intermodulation between inputs. It consists of 5 inputs: FM-VHF-UHF-UHF-FI, VHF and UHF have two selectable gain margins while the FM input has a single amplifier stage.
-
Add to cartLine multiband amplifier (1 input/1 output) for SMATV/CATV systems. Separate amplification guarantees the absence of intermodulation among inputs and independent attenuators per band (terrestrial and satellite).?1 input: Return Path/VHF/UHF/IF Highlights Separate amplification enhance the output level without causing any interference among bands SAT attenuation and equalization control on each input MATV attenuation and equalization control. …
Central broadband MiniKom F 1 input C.Retorno/VHF/UHF/FI1…Read More
-
Central broadband MiniKom MATV + FI 4 inputs “F”…
KSh45,624.00Add to cart4-input multiband amplifier (FM-BIII-UHF-SAT) for SMATV systems. Separate amplification guarantees the absence of intermodulation among inputs and independent attenuators. Separate amplification enhance the output level without causing any interference among bands. PIN-diode technology gain attenuators on each input (0 dB-20 dB)
-
Central line amplifier DTKom Televes
KSh71,132.00Add to cartMATV central line applications.
Separate amplification, which facilitate high output voltages and minimizes intermodulation bands.
-
Central T.0X Televes
KSh66,776.00Add to cartT.0X AMPLIF. 47…862MHz G44dB Vs120dB?V Televes 5575. Low distortion of second and third order that allow high output voltage (typical values of 120 dB?V). It has two signal inputs. Equipped with test output.
-
Add to cartHigh-power multiband amplifier with multiple controls on the front end, which design uses components that minimize the total noise figure. Equipped with 3 inputs (FM-BIII-UHF).
Equipped with LTE700 Ready filtering.
RED compliant
Highlights
Separate amplification minimizes intermodulation between bands and provides high output levels
Designed using Push-Pull technology, which guarantees levels in the 123 dB?V range for terrestrial signals.
Includes a high-performance low-power consumption switch-mode power supply
High-screening Zamak chassis The design facilitates appropriate cooling
Features
Switch for pre-amplifier or BOSS system powering
Switched configurable gain (high/low), and high output level
Intuitive front cover, including adjustments and block diagram
Output signal LED indicator
Specifications
Bands UHF BIII FM
Frequency margin Mhz 470 … 694 174 … 370 88 … 108
Gain 0 dB 42 42 25
10 32 32 25
Gain margin (Manual)
0 … 20 (Manual)
0 … 20 (Manual)
0 … 20
Max. output level IMD3 (2 tones,-35 dB) dB?V (dBmV) 125 (65)
DIN 45004B 123 (63)
IMD3 (2 tones,-60 dB) 120 (60)
IMD2 (2 tones,-60 dB) – 122 (62) –
Noise figure dB 5 5 6
Test -20
Powering inputs V= 12
Max. current inputs mA 50
Mains voltage / frequency V~ / Hz 120 … 230 / 50-60
Total AC consumption OFF W / mA 5,8 / 120
ON W / mA 8,2 / 157
Protection level IP 20
Operating temperature range ?C (?F) -5 … +45 (23 … 113) -
DTKom broadband multiband amplifier 5 inputs:…
KSh79,264.00Add to cartHigh-power multiband amplifier with multiple controls on the front end, which design uses components that minimize the total noise figure. Equipped with 5 inputs (FM-BIII-21…32-36…48-UHF). The UHF band is divided in 2 of the inputs, which is useful in two-repeater reception installations since it allows an appropriate filtering of the channels for each of them.
Equipped with LTE700 filtering.
RED compliant
Highlights
Separate amplification minimizes intermodulation between bands and provides high output levels
Designed using Push-Pull technology, which guarantees levels in the 123 dB?V range for terrestrial signals.
Includes a high-performance low-power consumption switch-mode power supply
High-screening Zamak chassis The design facilitates appropriate cooling
Features
Switch for pre-amplifier or BOSS system powering
Switched configurable gain (high/low), and high output level
Intuitive front cover, including adjustments and block diagram
Output signal LED indicator
Specifications
Bands UHF BV BIV BIII FM
Frequency margin MHz 470 … 694 590… 694
(Ch36…48) 470 … 566
(Ch21…32) 174 … 370 88 … 108
Gain 0 dB 42 41(1) 41(2) 42 25
10 32 31(1) 31(2) 32 25
Gain margin (Manual)
0 … 20 (Manual)
0 … 20 (Manual)
0 … 20 (Manual)
0 … 20 (Manual)
0 … 20
Max. output level IMD3 (2 tones,-35 dB) dB?V
(dBmV) 125 (65)
DIN 45004B 123 (63)
IMD3 (2 tones,-60 dB) 120 (60)
IMD2 (2 tones,-60 dB) – – – 122 (62) –
Noise figure dB 10 10 10 5 6
Test -20
Powering inputs V= 12
Max. curent inputs mA 50
Mains voltage /frequency V~ / Hz 120 … 230 / 50-60
Total AC consumption OFF W / mA 5,8 / 120
ON W / mA 9,6 / 180
Protection level IP 20
Operating temperature range ?C (?F) -5 … +45 (23 … 113) -
DTKom broadband multiband amplifier 5 inputs:…
KSh79,264.00Add to cartHigh-power multiband amplifier with multiple controls on the front end, which design uses components that minimize the total noise figure. Equipped with 5 inputs (FM-BIII-21…36-38…48-UHF). The UHF band is divided in 2 of the inputs, which is useful in two-repeater reception installations since it allows an appropriate filtering of the channels for each of them.
Equipped with LTE700 filtering.
RED compliant
Highlights
Separate amplification minimizes intermodulation between bands and provides high output levels
Designed using Push-Pull technology, which guarantees levels in the 123 dB?V range for terrestrial signals.
Includes a high-performance low-power consumption switch-mode power supply
High-screening Zamak chassis The design facilitates appropriate cooling
Features
Switch for pre-amplifier or BOSS system powering
Switched configurable gain (high/low), and high output level
Intuitive front cover, including adjustments and block diagram
Output signal LED indicator
Specifications
Bands UHF BV BIV BIII FM
Frequency margin MHz 470 … 694 606 … 694
(Ch38…48) 470 … 598
(Ch21…36) 174 … 370 88 … 108
Gain 0 dB 42 41(1) 41(2) 42 25
10 32 31(1) 31(2) 32 25
Gain margin (Manual)
0 … 20 (Manual)
0 … 20 (Manual)
0 … 20 (Manual)
0 … 20 (Manual)
0 … 20
Max. output level IMD3 (2 tones,-35 dB) dB?V
(dBmV) 125 (65)
DIN 45004B 123 (63)
IMD3 (2 tones,-60 dB) 120 (60)
IMD2 (2 tones,-60 dB) – – – 122 (62) –
Noise figure dB 10 10 10 5 6
Test -20
Powering inputs V= 12
Max. curent inputs mA 50
Mains voltage /frequency V~ / Hz 120 … 230 / 50-60
Total AC consumption OFF W / mA 5,8 / 120
ON W / mA 9,6 / 180
Protection level IP 20
Operating temperature range ?C (?F) -5 … +45 (23 … 113)(1) G(Ch38)=37/27dB
(2) G(Ch36)=38/28dB
-
Headsets DTKOM 5 inputs 1 output U-BV-BIV-V-FM Televes
KSh118,026.00Add to cartHead station DTKom 5 inputs / 1 output FM-VHF-BIV-BV-UHF. Range of power stations designed for both header and distribution use. Designed to facilitate adjustment processes, thanks to its arrangement of microswitches and trimmers that can be manipulated from the outside of the plant. Televes 4509
-
IF launch amplifier 2 IF inputs + MATV Televes
KSh62,412.00Add to cartMATV launch amplifiers, designed for small and medium size distribution networks. To be used as MATV headend. Featuring a Low/High gain switch guaranteeing a wide dynamic margin with low noise figure.
-
Add to cartGround Amplification Station 4 inputs. BI-FM-BIII / FM-UHF. 106 dB?V High power broadband power stations, for amplification of terrestrial and satellite signals in small collective installations.
Features
Low power broadband power stations, for amplification of terrestrial signals in small installations.
Variable input attenuators.
For all models, in the UHF inputs, there will be a system (through insertion of a small bridge) that allows switching the higher frequency of UHF between 862 MHz (current limit) and 790 MHz (new limit of the “digital dividend” ).
Zamak chassis housed in a plastic box.
Connectors F. Internal mounting and wall mounting.
The two UHF inputs channels 21-60 / 69 selectable by means of a bridge
High level of output
Current injection for mast preamps
Test of exit for verifications without disconnecting the service
Specifications
4 entries.
1 exit
Frequency band: 45-790 MHz.
Gain:31 dB for the FM band.
31 dB for the DAB band.
36 dB for the UHF band.
Output level:96dBuV on the TV band.
Noise figure:7 dB on the FM band.
7 dB in the DAB band.
8 dB in the UHF band.
240 VAC power.
Consumption of 16 W. -
Add to cartNBS-701-C48 is an broadband amplifier covering from 47 to 694 MHz, with slope adjustment.
Features
Mid-power amplification centre for terrestrial signals in small installations
Input with a selectable power supply for mast amplifier: 0, 12 or 24V
Slope control from 47 to 694 MHz
Interstage input attenuators to improve noise figure
Output test for checks without disconnecting the service
DownloadsTECHNICAL SHEET AND SPECIFICATIONS
MANUAL
-
Add to cartNBS-704-C48 is a multiband amplifier for the amplification of signals coming from different terrestrial antennas
Features
NBS 700 series medium power broadband amplifiers for terrestrial signals in small installations
UHF inputs with a selectable power supply for mast amplifier: 0, 12 or 24V
Interstage input attenuators to improve noise figure
Output test for checks without disconnecting the service
Switched power supply.
Internal mounting and wall fixing
DownloadsTECHNICAL SHEET AND SPECIFICATIONS
MANUAL
-
Add to cartIKUSI NBS-795-C48.
Medium power broadband central NBS 700 series for the amplification of terrestrial and satellite signals in small collective installations
Features
NBS 700 series medium power broadband amplifiers.
In each UHF input there is a switch to select the power supply of the mast preamps: 0, 12 or 24V.
The NBS-795 model has power for the LNB, with a switch you can choose one of the 5 different possibilities: 0, 13V, 13V/22kHz, 18V and 18V/22kHz.
Inter-stage input attenuators.
Switched power supply.
Internal mounting and wall fixing
DownloadsTECHNICAL SHEET AND SPECIFICATIONS
MANUAL
-
Ikusi NBS-801-C48 Amplification centre 1 input UHF
KSh25,126.00Add to cartIKUSI NBS-801-C48. Terrestrial and Satellite headend amplifiers. Amplifies, equalizes and combines analog or digital radio and television signals in medium size facilities
Features
Adapted to the first and second digital dividend.
High-power broadband amplifiers, for terrestrial and satellite signals in small installations. NBS800 series high-power broadband amplifiers, NBS600 series mid-power broadband amplifiers.
Interstage input attenuators.
Powered by switching power supply, in removable box.
Power passing to input.
Zamak housing with protective cover for adjustment potentiometers.
F Connectors. Wall fixing and indoor mounting.
Grounding terminal.
Compatible with UNICABLE TM.
Technical specifications
Model (Ref.) NBS801-C60 (3572)
NBS801-C48 (3573) NBS804-C60 (3563)
NBS804-C48 (3564) NBS604-C60 (3566)
NBS604-C48 (3567) NBS895-C60 (3575)
NBS895-C48 (3576) NBS695-C60 (3569)
NBS695-C48 (3570)
Inputs 1 4
BI/FM – BIII/DAB – 2xUHF 5
BI/FM – BIII/DAB -2xUHF – SAT IF
Frequency range MHz 45-790??? NBS801-C60
45-694??? NBS801-C48 BI/FM:???? 45-112
BIII/DAB:? 174-240
2xUHF:
470-790? NBS804/604-C60
470-694? NBS804/604-C48 BI/FM:??? 45-112
BIII/DAB: 174-240
2xUHF:
470-790? NBS895/695-C60
470-694? NBS895/695-C48
FI-SAT:?? 950-2400
Gain dB 42 BI/FM:?????? 42
BIII/DAB:??? 42
2xUHF:?????? 45 36
36
39 BI/FM:??????? 42
BIII/DAB:???? 42
2xUHF:??????? 45
SAT IF:??????? 40 36
36
39
34
Gain adjustment dB 0 – 18 0 – 18 0 – 18
Slope control range dB 0 – 12 ? SAT IF : 0 / 6
bridge
Response flatness dB ?2 BI/FM: BIII/DAB: 2xUHF: ?2
?2
?1,5 BI/FM: BIII/DAB: 2xUHF: SAT IF: ?2
?2
?1,5
?2
Outputs 1 1 1
Outputs test dB -30 -30 -30
Output level dB?V * 118 BI/FM:???????? 118
BIII/DAB:????? 118
2xUHF:??????? 118 BI/FM:?????? 112
BIII/DAB:??? 112
2xUHF:????? 112 BI/FM:????????? 118
BIII/DAB:?????? 118
2xUHF:?????????? 118
** SAT IF:?????? 120 BI/FM:???????? 112
BIII/DAB:????? 112
2xUHF:???????? 112
** SAT IF:???? 114
Noise figure dB 6 BI/FM: BIII/DAB: 2xUHF: 6
6
8 BI/FM: BIII/DAB: 2xUHF: SAT IF: 6
6
8
9
Input/output return loss dB 10 10 BI/FM-BIII/DAB-2xUHF: 10
SAT IF: 6
Voltage/current preamplifier mast ? 12-24V
100mA UHF2: 12-24V 100 mA UHF2: 0-12-24 V ? 100 mA SAT IF: 0-13-18V ? 100 mA LNB: 0-22 kHz
Mains supply voltage (+10? -15? ) VAC 230-240 230-240 230-240
Consumption W 8 8 5 16 8?
MANUAL/DATASHEET
-
Add to cartIKUSI NBS-804-C48. Terrestrial and Satellite headend amplifiers. Amplifies, equalizes and combines analog or digital radio and television signals in medium size facilities
Features
Adapted to the first and second digital dividend.
High-power broadband amplifiers, for terrestrial and satellite signals in small installations. NBS800 series high-power broadband amplifiers, NBS600 series mid-power broadband amplifiers.
Interstage input attenuators.
Powered by switching power supply, in removable box.
Power passing to input.
Zamak housing with protective cover for adjustment?potentiometers.
F Connectors. Wall fixing and indoor mounting.
Grounding terminal.
Compatible with UNICABLE TM.
Current injection for pre-mast and LNB.
Test of exit for verifications without disconnecting the service.
Technical specifications
Model (Ref.) NBS801-C60 (3572)
NBS801-C48 (3573) NBS804-C60 (3563)
NBS804-C48 (3564) NBS604-C60 (3566)
NBS604-C48 (3567) NBS895-C60 (3575)
NBS895-C48 (3576) NBS695-C60 (3569)
NBS695-C48 (3570)
Inputs 1 4
BI/FM – BIII/DAB – 2xUHF 5
BI/FM – BIII/DAB -2xUHF – SAT IF
Frequency range MHz 45-790??? NBS801-C60
45-694??? NBS801-C48 BI/FM:???? 45-112
BIII/DAB:? 174-240
2xUHF:
470-790? NBS804/604-C60
470-694? NBS804/604-C48 BI/FM:??? 45-112
BIII/DAB: 174-240
2xUHF:
470-790? NBS895/695-C60
470-694? NBS895/695-C48
FI-SAT:?? 950-2400
Gain dB 42 BI/FM:?????? 42
BIII/DAB:??? 42
2xUHF:?????? 45 36
36
39 BI/FM:??????? 42
BIII/DAB:???? 42
2xUHF:??????? 45
SAT IF:??????? 40 36
36
39
34
Gain adjustment dB 0 – 18 0 – 18 0 – 18
Slope control range dB 0 – 12 ? SAT IF : 0 / 6
bridge
Response flatness dB ?2 BI/FM: BIII/DAB: 2xUHF: ?2
?2
?1,5 BI/FM: BIII/DAB: 2xUHF: SAT IF: ?2
?2
?1,5
?2
Outputs 1 1 1
Outputs test dB -30 -30 -30
Output level dB?V * 118 BI/FM:???????? 118
BIII/DAB:????? 118
2xUHF:??????? 118 BI/FM:?????? 112
BIII/DAB:??? 112
2xUHF:????? 112 BI/FM:????????? 118
BIII/DAB:?????? 118
2xUHF:?????????? 118
** SAT IF:?????? 120 BI/FM:???????? 112
BIII/DAB:????? 112
2xUHF:???????? 112
** SAT IF:???? 114
Noise figure dB 6 BI/FM: BIII/DAB: 2xUHF: 6
6
8 BI/FM: BIII/DAB: 2xUHF: SAT IF: 6
6
8
9
Input/output return loss dB 10 10 BI/FM-BIII/DAB-2xUHF: 10
SAT IF: 6
Voltage/current preamplifier mast ? 12-24V
100mA UHF2: 12-24V 100 mA UHF2: 0-12-24 V ? 100 mA SAT IF: 0-13-18V ? 100 mA LNB: 0-22 kHzMains supply voltage (+10? -15? ) VAC 230-240 230-240 230-240
Consumption W 8 8 5 16 8?
MANUAL/DATASHEET
-
Ikusi NBS-895-C48 Amplification centre 4 TV+1 SAT
KSh31,834.00Add to cartThis model replaces the Ikusi NBS-895 (ref. Ikusi-3576)
Within the range of broadband amplifiers, we present the 5 models of programmable power stations for terrestrial and satellite signals, each model has a frequency cut adapted to a future evolution of the Digital Dividend.
Features
Adapted to the first and second digital dividend.
High-power broadband amplifiers, for terrestrial and satellite signals in small installations. NBS800 series high-power broadband amplifiers, NBS600 series mid-power broadband amplifiers.
Interstage input attenuators.
Powered by switching power supply, in removable box.
Power passing to input.
Zamak housing with protective cover for adjustment potentiometers.
F Connectors. Wall fixing and indoor mounting. Grounding terminal. ? Compatible with UNICABLE TM.
Specifications
Model (Ref.) NBS895-C48
EAN Code 8435136435761
Inputs5
BI/FM – BIII/DAB -2xUHF – FI SAT
Frequency range MHz??????
BI/FM: 45-112
BIII/DAB: 174-240?
2xUHF: 470-694
FI-SAT: 950-2400
Gain dB???
BI/FM: 42
BIII/DAB: 42?
2xUHF: 45?
FI-SAT: 40
Gain adjustment dB 0 – 18
Slope control range dB??FI-SAT : 0 / 6
puente
Response flatness dB???
BI/FM:??2
BIII/DAB:??2
2xUHF:??1.5
FI-SAT: ?2
Outputs ? 1
Outputs test dB -30
Output level dB?V???BI/FM: 118
BIII/DAB: 118?
2xUHF: 118
** FI-SAT: 120
Noise figure dB???
BI/FM: 6?
BIII/DAB: 6?
2xUHF: 8?
FI-SAT: 9
Input/output return loss dB?
BI/FM-BIII/DAB-2xUHF: 10
FI-SAT: 6
Voltage/current preamplifier mast ????
UHF2: 0-12-24 V ? 100 mA
FI SAT: 0-13-18V ? 100 mA
LNB: 0-22 kHz
Mains supply voltage (+10% -15%) VAC 230-240
Consumption W 16* (DIN-45004B IMD -60 dB)
** (EN 50083-3 IMD -35 dB)
? NBS895 and NBS695 Compatible with UNICABLE TM
-
Ikusi ONE+ Digital programmable amplifier
KSh73,180.00Add to cartDigital ONE+ programmable amplifier
Features
Unique market with 131 dB?V Output level.
32 tunable VHF/UHF filters with variable bandwidth between 1 and 4 channels.
Larger Dynamic Input Range (allows to work with weaker signals).
Remote maintenance (optional) via Wifi and Ethernet.
Copy of configurations and software update in the field, by means of “microSD” card.
Intuitive operation
Auto programmable in 10 seconds.
Oled screen.
Configuration via Joystick and Micro SD.
Coming soon, remote maintenance via wifi and ethernet.
Specifications
MODEL ??ONE+? ? ? ? ?ONE+ SAT???
REF.? ??2865? ? ? ? ? ?2864???
TV system ??AM-TV / DVB-T????
??Inputs ??7????
?BI/FM?EXT (VHF/UHF)
(only ONE+ SAT)
?BIII / DAB? UHF 3 UHF 2??? ?UHF 1?
FI-SAT
(only ONE+ SAT)
?Covered band ?MHz? ?47 – 108? ?47 – 240 / 470 – 862? ?174 – 240?
470 – 862
470 – 790
470 – 694??????
?950 – 2150?
Number of programmable filters
Number of channels per filter
????????????
32?
1 – 4??
???
Filter bandwidth MHz ? ? 7 / 8 / DAB 8 / 16 / 24 / 32?? ?
Entry level dB?V 40 – 90 60 – 80 ?50 – 100?? 50 – 80
CAG dB ??? S??? ?
Selectivity at the end of channel ? 1 MHz dB ??? 35?? ?
Output level?OUT 1 dB?V ?131 (IMD3 -36 dB)? 131 (IMD3 -36 dB)?? 118 (IMD3 -35 dB)Output level?OUT 1 + OUT 2
(s?lo ONE+ SAT)
?dB?V? 128 (IMD3 -36 dB)???? 128 (IMD3 -36 dB)?????? 118 (IMD3 -35 dB)?
Output level regulation dB 25 20 ?30?? 20
Equalization dB ??? 0 – 6?? 0 – 9
Noise figure dB ??< 6???? Test output dB ??-30???? Output voltage VDC mA ????????? Off - 12 - 24 100?????? Bypass - 13 - 18 300 Tone kHz ??????? 0-22 Consumption W ??25????? Operating temperature ?C ??-5 ... +50????? Protection index IP ??IP30????? -
Ikusi ONE+ SAT Digital programmable amplifier
KSh75,686.00Add to cartDigital ONE+ SAT programmable amplifier
Features
Unique market with 131 dB?V Output level.
32 tunable VHF/UHF filters with variable bandwidth between 1 and 4 channels.
Larger Dynamic Input Range (allows to work with weaker signals).
Remote maintenance (optional) via Wifi and Ethernet.
Copy of configurations and software update in the field, by means of “microSD” card.
Intuitive operation.
Auto programmable in 10 seconds.
Oled screen.
Configuration via Joystick and Micro SD.
Coming soon, remote maintenance via wifi and ethernet.
Specifications
MODEL ??ONE+? ? ? ? ?ONE+ SAT???
REF.? ??2865? ? ? ? ? ?2864???
TV system ??AM-TV / DVB-T????
??Inputs ??7????
?BI/FM?EXT (VHF/UHF)
(only ONE+ SAT)
?BIII / DAB? UHF 3 UHF 2??? ?UHF 1?
FI-SAT
(only ONE+ SAT)
?Covered band ?MHz? ?47 – 108? ?47 – 240 / 470 – 862? ?174 – 240?
470 – 862
470 – 790
470 – 694??????
?950 – 2150?
Number of programmable filters
Number of channels per filter
????????????
32?
1 – 4??
???
Filter bandwidth MHz ? ? 7 / 8 / DAB 8 / 16 / 24 / 32?? ?
Entry level dB?V 40 – 90 60 – 80 ?50 – 100?? 50 – 80
CAG dB ??? S??? ?
Selectivity at the end of channel ? 1 MHz dB ??? 35?? ?
Output level?OUT 1 dB?V ?131 (IMD3 -36 dB)? 131 (IMD3 -36 dB)?? 118 (IMD3 -35 dB)Output level?OUT 1 + OUT 2
(s?lo ONE+ SAT)
?dB?V? 128 (IMD3 -36 dB)???? 128 (IMD3 -36 dB)?????? 118 (IMD3 -35 dB)?
Output level regulation dB 25 20 ?30?? 20
Equalization dB ??? 0 – 6?? 0 – 9
Noise figure dB ??< 6???? Test output dB ??-30???? Output voltage VDC mA ????????? Off - 12 - 24 100?????? Bypass - 13 - 18 300 Tone kHz ??????? 0-22 Consumption W ??25????? Operating temperature ?C ??-5 ... +50????? Protection index IP ??IP30????? -
Add to cartThe Johansson Profino Revolution Lite is an easy-to-use programmable control panel with autoscan and terrestrial signal converter. The module optimizes VHF/UHF terrestrial signals from various inputs to provide you with high quality images on your TV. The latest in programmable centrals without equivalent in the market thanks to its evolutionary technology:
Input signal level reading: no field meter needed.
Can process more than 50 channels (32 filters)
You can convert a wide selection of channels
Can process output channels in S band
5G LTE protection (694MHz)
The most selective filters on the market (>50 dB to adjacent channels)
Automatic programming in a few seconds
CAG in real time on all filters.
Total flexibility in assigning filters from any input. Each channel can be changed to any other frequency in the VHF or UHF band (Flexible Matrix)
To prevent unauthorized persons from changing the settings, all control panels
programmable can be locked by a security code.
Made in Europe, for applications all over the world.
Power via F output connector
Product dimensions (height x width x depth): 165mm x 190mm x 59mmspecs
Tickets – 3 VHF/UHF (wide band)
Departures – 1 main (VHF-S-UHF)
Input frequency range (UE*) megahertz
megahertz VHF: 174 – 240
UHF: 470 – 694
Output frequency range (UE*) megahertz 174 – 862
LTE Protection megahertz 694MHz (5G)
entry level dB?V
dB?V VHF: 37** – 109
UHF: 37** – 109
VHF/UHF output power (60dB/IM3) dB?V 114
VHF/UHF output power (36dB/IM3) dB?V 125
VHF/UHF output power with 1 MUX dB?V 108
VHF/UHF output power with 6 MUX dB?V 108
VHF/UHF output power with 15 MUX dB?V 105
VHF/UHF output power with 32 MUX dB?V 102
number of channels – More than 50 (32 filters)
add channels – By 1, 2, 3, 4, 5 or 6 MUX
Conversion – Yes (from any VHF-UHF channel to any VHF-S-UHF channel)
Gain dB
dB VHF: > 65
UHF: > 65
gain adjustment dB channel ACC
noise figure dB 7
overall dimmer dB twenty
VHF/DAB attenuator dB fifteen
Selectivity dB/1MHz fifty
return loss dB 10
SRM output dB
dB VHF: 35
UHF: 35
ESD protection – All entries
Remote voltage for preamplifier
remote stream v
breast 12 or 24
100 (total for all 4 entries)
Operating temperature ?C -5 to +50
Power supply
power consumption v
W 12V (use ref.2438)
9
Dimensions millimeter 190x165x59
Weight kg 0.65 -
Johansson 7774 LTE 26 dB amplifier center
KSh18,876.00Add to cart4 inputs.
Separate VHF-UHF amplification,
Inter-stage attenuator and 30 dB dynamic range.
High gain (up to 26 dB), high output level (.>116 dB?gV).
Slope adjustment on VHF-UHF and UHF inputs.
High input level and low noise figure.
Remote power supply 5-12 Volts.
Test output ?V30 dB.
FM-BIII/DAB-UHF-Wideband amplifier (VHF-UHF) with independent gain adjustment and slope adjustment.
-
Johansson 7781 LTE amplifier center 1 input 34 dB
KSh17,146.00Add to cartHigh output power distribution amplifier (cable) with separate gain adjustment.
Johansson offers a new range of high output power Multiband distribution amplifiers.?
The amplifiers are fully LTE-ready and have a high gain.?
This ensures a perfect signal quality throughout the building.?
The amplifiers are far more efficient than their predecessors.
Features
1 Cable input + Return Path?
split-band amplifiers with interstage attenuators and dynamic range of 20 dB?
high gain, high output power?
high input power to ensure input overload is virtually impossible?
compact housing?
detachable power supply (included)?
-30 dB test output?
Specifications
Inputs – Cable
Frequency range MHz
MHz 88 – 862 (Cable)?
5 – 65 (Return Path)
Gain dB 15 – 35
Slope dB 5 – 15 (At 15dB gain)?
25 – 35 (At 35dB gain)
Max. input power? dB?V 100
Max. output power? dB?V 116
Noise figure? dB 7
Return loss? dB >10?
Test Port? dB -30?
Supply voltage? VAC 100 – 240?
Power consumption? W 8
Dimensions mm 217 x 165 x 59? -
Johansson 7784 LTE amplifier center 4 inputs 35 dB
KSh20,292.00Add to cartHigh output power distribution amplifier (BI/FM, BIII/DAB, UHF1, UHF2) with separate gain adjustments, DC selection and LTE selection.?
Johansson offers a new range of high output power Multiband distribution amplifiers.
The RED compliant amplifiers are fully LTE-ready and have a high gain.
This ensures a perfect signal quality throughout the building.
The amplifiers are far more efficient than their predecessors.
Features
4 inputs: BI/FM, BIII/DAB, UHF1, UHF2?
split-band amplifiers with interstage attenuators and dynamic range of 20 dB?
high gain, high output power?
high input power to ensure input overload is virtually impossible?
VDC switchable remote power?
compact housing?
detachable power supply (included)?
-30 dB test output?
RED compliant?
Specifications
Inputs – BI/FM?
BIII/DAB?
UHF1?
UHF2
Frequency range MHz BI/FM: 47 – 108?
BIII/DAB: 174 – 240?
UHF1: 470-694 or 862 (switchable)?
UHF2: 470-694 or 862 (switchable)
Gain dB BI/FM: 10-30?
BIII/DAB: 10-30?
UHF1: 15-35?
UHF2: 15-35
Max. input power dB?V BI/FM (-60dBc): 94?
BIII/DAB (-60dBc): 92?
UHF1 (-60dBc): 96?
UHF2 (-60dBc): 96
Max. output power? dB?V BI/FM (-60dBc): 118?
BIII/DAB (-60dBc): 119?
UHF1 (-60dBc): 118?
UHF2 (-60dBc): 118
Noise figure? dB BI/FM: 4.5?
BIII/DAB: 4?
UHF1: 5.5?
UHF2: 5.5
Return loss? dB >10?
Test Port? dB -30?
Remote Power? V OFF – 12V – 24V?
DC Mode? mA BIII/DAB: 100?
UHF1: 100?
UHF2: 100
RED selectivity classification? – 0 and 1?
Supply voltage? VAC 100 – 240?
Power consumption? W 23
Dimensions mm 217 x 165 x 59? -
Add to cartHigh output power distribution amplifier (BI/FM, BIII/DAB, UHF1, UHF2, SAT) with separate gain adjustments, DC selection and LTE selection.
Johansson offers a new range of high output power Multiband distribution amplifiers.?
The RED compliant amplifiers are fully LTE-ready and have a high gain.?
This ensures a perfect signal quality throughout the building.?
The amplifiers are far more efficient than their predecessors.?
Features
5 inputs: BI/FM, BIII/DAB, UHF1, UHF2, SAT?
split-band amplifiers with interstage attenuators and dynamic range of 20 dB?
high gain, high output power?
high input power to ensure input overload is virtually impossible?
VDC switchable remote power?
compact housing?
detachable power supply (included)?
-30 dB test output?
RED compliant?
Specifications
Inputs – BI/FM?
BIII/DAB?
UHF1?
UHF2?
SAT
Frequency range MHz BI/FM: 47 – 108?
BIII/DAB: 174 – 240?
UHF1: 470-694 or 862 (switchable)?
UHF2: 470-694 or 862 (switchable)?
SAT: 950-2400
Gain dB BI/FM: 10-30?
BIII/DAB: 10-30?
UHF1: 15-35?
UHF2: 15-35?
SAT: 10-35
Slope adjustment? dB SAT: 0-10?
Max. input power? dB?V BI/FM (-60dBc): 94?
BIII/DAB (-60dBc): 92?
UHF1 (-60dBc): 96?
UHF2 (-60dBc): 96?
SAT (-35dBc): 97
Max. output power? dB?V BI/FM (-60dBc): 118?
BIII/DAB (-60dBc): 119?
UHF1 (-60dBc): 118?
UHF2 (-60dBc): 118?
SAT (-35dBc): 115
Noise figure? dB BI/FM: 4.5?
BIII/DAB: 4?
UHF1: 5.5?
UHF2: 5.5?
SAT: 7.5
Return loss? dB >10?
Test Port? dB -30?
Remote Power? V OFF – 12V – 24V?
DC Mode? mA BIII/DAB: 100?
UHF1: 100?
UHF2: 100
DC Mode SAT? V OFF – 13V – 18V – 22kHz?
(Selection: internal, power inserter or external)
SAT remote power? mA 350
RED selectivity classification? – 0 and 1?
Supply voltage? VAC 100 – 240?
Power consumption? W 29
Dimensions mm 217 x 165 x 59 -
MicroKom Amplifier Return Channel + MATV 1e/1s “F”:…
KSh56,598.00Add to cartClass 4 line amplifier, designed for the distribution of multimedia services in small or medium-sized buildings. They are characterized by offering adjustments through insertable jumpers in both the direct and return channels. The gain on the direct channel is 30/35dB, and the return channel can be passive or active (28dB).
-
MicroKom Amplifier Return Channel + MATV 1e/1s “F”:…
KSh54,776.00Add to cartClass 4 line amplifier, designed for the distribution of multimedia services in small or medium-sized buildings. They are characterized by offering adjustments through insertable jumpers in both the direct and return channels. The gain on the direct channel is 30/35dB, and the return channel can be passive or active (30dB).
-
MicroKom Amplifier Return Channel + MATV 1e/1s “F”:…
KSh49,862.00Add to cartClass 4 line amplifier, designed for the distribution of multimedia services in small or medium-sized buildings. They are characterized by offering adjustments through insertable jumpers in both the direct and return channels. The gain on the direct channel is 20/25dB, and the return channel can be passive or active (20dB).
-
MicroKom Amplifier Return Channel + MATV 1e/1s “F”:…
KSh48,124.00Add to cartClass 4 line amplifier, designed for the distribution of multimedia services in small or medium-sized buildings. They are characterized by offering adjustments through insertable jumpers in both the direct and return channels. The gain on the direct channel is 20/25dB, and the return channel can be passive or active (20dB).
-
Add to cartConfigurable headend multiband amplifier for MATV systems with separate amplification that guarantees the absence of intermodulation among inputs. Equipped with 4 inputs: FM-VHF-UHF-UHF; the VHF and UHF inputs have both selectable gain margins, whereas the FM input has a single amplifying stage.
-
Add to cartConfigurable headend multiband amplifier for MATV systems with separate amplification that guarantees the absence of intermodulation among inputs. Equipped with 5 inputs: FM-VHF-UHF-21…32-34….48. The UHF band is divided in 2 of the inputs, which is useful in two-repeater reception installations since it allows an appropriate filtering of the channels for each of them.
-
Add to cartConfigurable headend multiband amplifier for MATV systems with separate amplification that guarantees the absence of intermodulation among inputs. Equipped with 5 inputs: FM-VHF-UHF-21…35-39….48. The UHF band is divided in 2 of the inputs, which is useful in two-repeater reception installations since it allows an appropriate filtering of the channels for each of them.
-
Add to cartCompact WideBand amplifier for 1-satellite Overlight installations. It is responsible for compensating the losses of the coaxial cable in the installation. This amplifier can be powered from the Overlight transmitter or from an external power supply. Maximum gain up to 13 dB. It is equipped with 2 (H/V) WideBand inputs and 2 (H/V) WideBand outputs (250-2400 MHz). Indoor use.
-
Add to cartCompact WideBand amplifier for 1-satellite Overlight installations. It is responsible for compensating the losses of the coaxial cable in the installation. This amplifier can be powered from the Overlight transmitter or from an external power supply. Maximum gain up to 29 dB. It is equipped with 2 (H/V) WideBand inputs and 2 (H/V) WideBand outputs (250-2400 MHz). Indoor use.
-
Televes DTKom IF + MATV central amplifier w/Ret.
KSh95,928.00Add to cartHigh-powered central amplifier with active/passive switchable amplifier for the return channel and IF amplifier.
-
Add to cartDTKom serie launch and distribution amplifier is designed to CATV operators and is suitable with DOCSIS settings thanks to his expanded band witdh. It has a switching-mode return patch (active or passive) so this can be used in CoaxData networks.
-
Triax TMA 447 LTE 5G Central 5 inputs / 1 output
KSh23,232.00Add to cartThe new generation of TMA 447 LTE 5G multiband amplifiers has an LTE filter (47-694 MHz) and adapts to all your network needs and needs, thanks to its low price, high technology and high performance. The entire range of new amplifiers, optimized for distribution in small and medium communities, will convince you with its excellent amplification quality, cost efficiency and simplicity of use and installation.
The TMA 447 LTE 5G is a multiband amplifier for small TV and Radio signal distribution networks. Compatible for analog and digital signals. It has four RF inputs (BI + FM; BIII + DAB; UHF1 and UHF2) and 1 output with separate amplification.
Features
ZAMAK housing
Separate amplification
Low noise figure
Switchable gain 35/45 dB at UHF inputs (470 – 694 MHz)
Output level 118 dB?V
24 Vdc power supply to preamps through the UHF1 input
Exit Test Point
Mains supply 220 ? 10 Vac
Low consumption
Mounting
Mounting on flat surfaces with suitable screws and in a properly ventilated place.
Mount the “F” connector on the cable, taking into account the minimum radius of curvature.
Make the connections to the TMA 447 LTE and tighten the connectors.
If the installation requires a mast amplifier to be installed, the supply voltage (24Vdc) will be carried out via cable through the UHF1 input.
Adjust the optimum input level to each of the inputs.
Set the desired output level using the level adjustment.
Specifications
Type? TMA 447 LTE 5G
Art. no 324447
BI+FM BIII+DAB UHF1 UHF2
Gain? dB 30 35 35/45 Switch 35/45 Switch
Gain regulation dB 20 20 20 20
Max. Output level dB?V 116 116 118 118
Noise figure dB >6 >6 >7 >7
Return losses? dB >12
Decoupling between inputs dB >35
Previous power Vdc/mA — — 24/80 —
Power supply Vac/Hz 220 ? 10/50Hz
Measures mm 172 x 112 x 42 -
Triax TMA 547 LTE 5G Central 5 inputs / 1 output
KSh25,410.00Add to cartTMA 547 LTE. Multiband Terrestrial + Satellite Amplifier.
1 FM input, 1 DAB input, 2 UHF inputs and 1 FI input
FM amplification: 30 dB – DAB: 35 dB – UHF: 35/45 dB (Switchable)
FI amplification: 40 dB
SAT output level 118 dB?V (IMA 35)
Output level Terr .: 118 dB?V (IMA 60)
Power supply for priors: 24 Vdc / 80 mA. (by UHF 1)
Power supply for LNB: 0/13/18 Vdc. 300 mA and 0/22 kHz or possibility of current passing from the STB
It allows selective amplification of different frequency bands.
UHF bandwidth limited to 790MHz to reject frec. LTE
Inputs provided with 0-20 dB attenuator.
Test point for control of the output signals without interrupting the service.
UHF input with remote switchable power for preamp. -
Add to cartUnleash the best TV experiences with TMB 2500. The programmable terrestrial channel processor can receive TV signals from multiple terrestrial antennas. It combines filtering, conversion, level equalization, and amplification.
This very compact unit is recommended for large TV distribution networks in residential buildings to offer excellent TV signal quality.
New and updated features
Higher gain and output level to directly connect more users to the coaxial distribution network
Pooling up to 6 MUXs improves flexibility for optimal coverage of special terrestrial broadcasting situations
Greater selectivity for suppression of adjacent channel interference the latest in Programmable Multiband Amplifiers
Higher gain 70 dB
Higher output level, up to 131 dB?V, to directly connect more users to the coaxial distribution network
Features
5 antenna inputs: FM / 4xVHF / UHF
Flex Matrix for over 50 channels with 32 filters per 1 … 6 MUX allows processing of individual channels to any output channel.
CAG in real time and separately on all multiplexes
50 dB rejection of the adjacent channel
Automatic selection of LTE 700-5G / 800-4G reject filters
Slope to compensate for the frequency dependent tilt of the coaxial cable network.
Access lock by security code.
Switchable remote power 0/12/24 VDC.
SD card slot for saving and reloading individual configuration settings.
Specifications -
Triax TMB 2500UK Programmable amplifier central 5…
KSh62,064.00Add to cartUnleash the best TV experiences with TMB 2500UK. The programmable terrestrial channel processor can receive TV signals from multiple terrestrial antennas. It combines filtering, conversion, level equalization, and amplification.
This very compact unit is recommended for large TV distribution networks in residential buildings to offer excellent TV signal quality.
A plug adapter is included as a gift.
New and updated features
Higher gain and output level to directly connect more users to the coaxial distribution network
Pooling up to 6 MUXs improves flexibility for optimal coverage of special terrestrial broadcasting situations
Greater selectivity for suppression of adjacent channel interference the latest in Programmable Multiband Amplifiers
Higher gain 70 dB
Higher output level, up to 131 dB?V, to directly connect more users to the coaxial distribution network
Features
5 antenna inputs: FM / 4xVHF / UHF
Flex Matrix for over 50 channels with 32 filters per 1 … 6 MUX allows processing of individual channels to any output channel.
CAG in real time and separately on all multiplexes
50 dB rejection of the adjacent channel
Automatic selection of LTE 700-5G / 800-4G reject filters
Slope to compensate for the frequency dependent tilt of the coaxial cable network.
Access lock by security code.
Switchable remote power 0/12/24 VDC.
SD card slot for saving and reloading individual configuration settings.
Specifications -
Add to cartTerrestrial channel processor with double SAT amplification that combines filtering, conversion and amplification of different antenna signals to two independent RF + SAT1 / RF + SAT2 high-level 2×118 dB?V outputs.
A single ICT headend
Single channel amplification function, channel conversion, two independent high gain satellite amplifiers, TERR and SAT mixer and 2 output lines.
The AGC (Automatic Gain Control) has been designed to comply with the standards, so that the output levels of the processed channels have a linear response with the difference in levels of ? 1 dB, lower than the requirements of the ICT (? 3dB).
Easy to set up
The TMB 502 S control panel has a 2×16 LCD display with 5 control buttons and can be configured manually or automatically. The search function and automatic settings provide savings in installation time and increased profit.
The 2×16 LCD display gives us complete information on the signal levels, both input and output, providing a saving in installation time and a greater benefit.
Features
7 antenna inputs: 1xFM / 3xVHF / UHF / 1xVHF / UHF-DAB / 2 xSAT.
32 filter Flex Matrix that allows processing of individual channels to any output channel.
CAG in real time and separately on all multiplexes.
50 dB of adjacent channel rejection.
High gain 20 – 80 dB.
VHF / UHF channel conversion.
2 SAT amplifiers (2 x40 dB).
2 RF-SAT1 / RF SAT2 high-level outputs (2×118 dB?V).
Selection of reject filters
LTE 700-5G / 800-4G.
Equalization to compensate for the slope produced by the Coaxial cable.
Access blocking by security code.
Switchable remote power: 0/12/24 VDC
(TERR) and 13 / 18VDC (SAT).
USB port to export and import configurations.
Specifications -
Add to cartProgrammable multiband Amplifier TMB 100 – TER (BI-FM, BIII-DAB, 3x UHF) 10x UHF filters
Interconnecting and amplifying selectively up to 5 different positioned TV antennas
This multi-band amplifier is ideal for interconnecting and amplifying of several aerial antennas in MATV plants. The amplifier uses the frequency-selective filtering and level matching of UHF channels. They are selectively combined with the VHF bands
Features
Easy programming directly via keypad at the amplifier, shown at the display
Very flexible with selective UHF filters, adjusting with bandwidth 1-7 channels (8-56 MHz)
Every UHF filter has separate adjustments like amplification and mid frequency
The activable AGC provides a constant for UHF and VHF Output level und stable operating conditions
Export or import of all device settings via RS 232 interface
Switchable short-circuit-protected remote feeding for UHF pre-amplifiers
Specifications
CHARACTERISTICS?
Max. input level – FM 90 dB?V
Max. input level – BIII/DAB 80 dB?V
Max. input level – UHF 95 dB?V
Output level BIII/DAB – 170-230 MHz 120 dB?V
Output level UHF 117 dB?V
Output level @ 60dB IMD – UHF 117 dB?V
FREQUENCY?
Frequency range BI/FM 47-108 MHz
Frequency range BIII/DAB 174-240 MHz
Frequency range UHF 470-862 MHz
Filter Bandwidth UHF 8-56 MHz
Filter Bandwidth VHF 7 MHz
Filter Selectivity @ 16 MHz 16 dB
Number of channel filters 10
Bandwidth UHF 8-56 MHz
Bandwidth VHF 7 MHz
GAIN?
Gain – FM [47-108 MHz] 32 dB
Gain – DAB [170-230 MHz] 48 dB
Gain – UHF 1 [470-790 MHz] 55 dB
Gain – UHF 2 [470-790 MHz] 55 dB
Gain – UHF 3 [470-790 MHz] 55 dB
Noise figure BI/FM 9 dB
Noise figure UHF 7 dB
Noise figure VHF 5 dB
LOSS?
Attenuation 0-20 dB
RETURN LOSS?
Return Loss >8 dB
ELECTRICAL?
Impedance 75 ?
OPERATIONAL?
AC Supply voltage 100…240 VAC
Power Consumption (typ.) 9…16 W
Operating temperature range -5 – +40 ?C
Certification CE, RoHS2
Class A
Input with Remote Supply UHF 1, 2 ,3
LINE power current (max.) 80 mA
LINE power DC voltage (max.) 12/24 VDC
Remote Supply UHF1 12 – 24 / 80 V/mA
Remote Supply UHF2 12 – 24 / 80 V/mA
Remote Supply UHF3 12 – 24 / 80 V/mA
CONNECTORS?
Number of inputs 5
Number of outputs 1
Connector Type F-female
MECHANICAL?
Packaging Volume 0,000 m3
Net Weight 1,667 kg
Tara Weight 0,000 kg
Total Weight 1,667 kg
Packaging Height 0,000 m
Packaging Width 0,000 m
Packaging Depth 0,000 m
Depth (mm) 360 mm
Height (mm) 50 mm
Width (mm) 225 mm -
Add to cart1 RF input (47 … 694 MHz) RF gain -3dB
1 input SAT FI Gain SAT-FI 42dB
118 dB?V output level.
Power for LNB 13/18 Vdc and 0/22 kHz
Popular Products
-
Dual Monitor Arm for 13-32 inch Screens up to 19.8 lbs Each - Monitor Mounts for 2 Monitors - Dual Computer Monitor Stand for Desk VESA 75x75 100x100 Adjustable Gas Spring Desk Mount Black
-
Dual Monitor Arm White for 13-32 inch Screens up to 19.8 lbs Each - Monitor Mounts for 2 Monitors - Dual Computer Monitor Stand for Desk VESA 75x75 100x100 Adjustable Gas Spring Desk Mount
-
Single Monitor Desk Mount for 13-34 inch Flat/Curved Screens up to 26.5 lbs - Adjustable Monitor Stand Full Motion Gas Spring Monitor Arm Single Monitor Mount Ultrawide Monitor Arm Black
-
ONKRON Dual Monitor Arm Desk Mount for Two 13-32 Inch Monitors up to 19 lbs Each - Gas Spring Monitor Arm Mount, VESA 75x75-100x100, Dual Monitor Stand for Desk/Dual Monitor Mount Desk Black
-
ONKRON Mobile TV Stand with Wheels Rolling TV Stand for 40-80 Inch LED LCD Flat or Curved Screen TVs up to 122 lbs - Height Adjustable TV Cart with Shelves - Portable TV Stand (TS2771) Black
Products
-
Dual Monitor Arm for 13-32 inch Screens up to 19.8 lbs Each - Monitor Mounts for 2 Monitors - Dual Computer Monitor Stand for Desk VESA 75x75 100x100 Adjustable Gas Spring Desk Mount Black
-
Dual Monitor Arm White for 13-32 inch Screens up to 19.8 lbs Each - Monitor Mounts for 2 Monitors - Dual Computer Monitor Stand for Desk VESA 75x75 100x100 Adjustable Gas Spring Desk Mount
-
Single Monitor Desk Mount for 13-34 inch Flat/Curved Screens up to 26.5 lbs - Adjustable Monitor Stand Full Motion Gas Spring Monitor Arm Single Monitor Mount Ultrawide Monitor Arm Black
-
ONKRON Dual Monitor Arm Desk Mount for Two 13-32 Inch Monitors up to 19 lbs Each - Gas Spring Monitor Arm Mount, VESA 75x75-100x100, Dual Monitor Stand for Desk/Dual Monitor Mount Desk Black
-
ONKRON Mobile TV Stand with Wheels Rolling TV Stand for 40-80 Inch LED LCD Flat or Curved Screen TVs up to 122 lbs - Height Adjustable TV Cart with Shelves - Portable TV Stand (TS2771) Black