Category: DISEqC / MultiSwitch
DISEqC / MultiSwitch
Showing 1–60 of 78 results
-
Alcad AU-620 Amplifier multiswitch 4 inputs
KSh39,122.00Add to cartAlcad AU-620 – Serie 913: Amplifier multiswitch 4 inputs.
SAT amplifier for 4, 8 or 16 polarities, for installations in cascade. For 16 polarities, two stacked amplifiers of 8 polarities are installed. Equipped with gain control and independent equaliser for each polarity. Requires the FU-513 power supply unit, from the NET power supply connector, to feed the amplifier and intermediate active multiswitches. To power the LNB, the FU-612 power supply unit is used.
Applications
Medium-sized to large MATV and SMATV installations. Enables distribution to up to 128 TV outlets in a single line, with a single amplifier and FU-513 power supply unit. By dividing the installation into lines of 128 outlets and distributing the 4 or 8 polarities and the terrestrial TV to all the lines, it is possible to reach more than 2,000 outlets. Amplifies and equalises all the polarities before the cascade of multiswitches.
Characteristics
Return path included from 5 to 65MHz. Shielded zamak chassis with plastic supports. F-type connectors. Two power supply jacks, 9.5mm x 2.1mm for the NET cascade and for the LNB.
Downloads
Technical specification
Technical specification
Manuals
AU-620 Manual pdf 796.9 KB
Catalogues
CATALOGUE_ALCAD_EN_MULTIMEDIA_TV pdf 5.42 MB
Certificates
CE_Declaration-TV_Distribution pdf 269.31 KB
Technical specifications
-
Alcad AU-621 Amplifier multiswitch 4 inputs 25 db
KSh37,218.00Add to cartAlcad AU-621 – Serie 913: Amplifier multiswitch 4 inputs 25 db.
SAT amplifier for 4, 8 or 16 polarities, for installations in cascade. For 16 polarities, two stacked amplifiers of 8 polarities are installed. Equipped with gain control and independent equaliser for each polarity. Requires the FU-513 power supply unit, from the NET power supply connector, to feed the amplifier and intermediate active multiswitches. To power the LNB, the FU-612 power supply unit is used.
Applications
Medium-sized to large MATV and SMATV installations. Enables distribution to up to 128 TV outlets in a single line, with a single amplifier and FU-513 power supply unit. By dividing the installation into lines of 128 outlets and distributing the 4 or 8 polarities and the terrestrial TV to all the lines, it is possible to reach more than 2,000 outlets. Amplifies and equalises all the polarities before the cascade of multiswitches.
Characteristics
Return path included from 5 to 65MHz. Shielded zamak chassis with plastic supports. F-type connectors. Two power supply jacks, 9.5mm x 2.1mm for the NET cascade and for the LNB.
Downloads
Technical specification
Technical specification
Manuals
AU-621 Manual pdf 796.9 KB
Catalogues
CATALOGUE_ALCAD_EN_MULTIMEDIA_TV pdf 5.42 MB
Certificates
CE_Declaration-TV_Distribution pdf 269.31 KB
Technical specifications
-
Alcad AU-640 Amplifier multiswitch 8 inputs
KSh60,654.00Add to cartAlcad AU-640 – Serie 913: Amplifier multiswitch 8 inputs.
SAT amplifier for 4, 8 or 16 polarities, for installations in cascade. For 16 polarities, two stacked amplifiers of 8 polarities are installed. Equipped with gain control and independent equaliser for each polarity. Requires the FU-513 power supply unit, from the NET power supply connector, to feed the amplifier and intermediate active multiswitches. To power the LNB, the FU-612 power supply unit is used.
Applications
Medium-sized to large MATV and SMATV installations. Enables distribution to up to 128 TV outlets in a single line, with a single amplifier and FU-513 power supply unit. By dividing the installation into lines of 128 outlets and distributing the 4 or 8 polarities and the terrestrial TV to all the lines, it is possible to reach more than 2,000 outlets. Amplifies and equalises all the polarities before the cascade of multiswitches.
Characteristics
Return path included from 5 to 65MHz. Shielded zamak chassis with plastic supports. F-type connectors. Two power supply jacks, 9.5mm x 2.1mm for the NET cascade and for the LNB.
Downloads
Technical specification
Technical specification
Manuals
AU-640 Manual pdf 796.9 KB
Catalogues
CATALOGUE_ALCAD_EN_MULTIMEDIA_TV pdf 5.42 MB
Certificates
CE_Declaration-TV_Distribution pdf 269.31 KB
Technical specifications
-
Alcad AU-641 Amplifier multiswitch 8 inputs 25 db
KSh52,328.00Add to cartAlcad AU-641 – Serie 913: Amplifier multiswitch 8 inputs 25 db.
SAT amplifier for 4, 8 or 16 polarities, for installations in cascade. For 16 polarities, two stacked amplifiers of 8 polarities are installed. Equipped with gain control and independent equaliser for each polarity. Requires the FU-513 power supply unit, from the NET power supply connector, to feed the amplifier and intermediate active multiswitches. To power the LNB, the FU-612 power supply unit is used.
Applications
Medium-sized to large MATV and SMATV installations. Enables distribution to up to 128 TV outlets in a single line, with a single amplifier and FU-513 power supply unit. By dividing the installation into lines of 128 outlets and distributing the 4 or 8 polarities and the terrestrial TV to all the lines, it is possible to reach more than 2,000 outlets. Amplifies and equalises all the polarities before the cascade of multiswitches.
Characteristics
Return path included from 5 to 65MHz. Shielded zamak chassis with plastic supports. F-type connectors. Two power supply jacks, 9.5mm x 2.1mm for the NET cascade and for the LNB.
Downloads
Technical specification
Technical specification
Manuals
AU-641 Manual pdf 796.9 KB
Catalogues
CATALOGUE_ALCAD_EN_MULTIMEDIA_TV pdf 5.42 MB
Certificates
CE_Declaration-TV_Distribution pdf 269.31 KB
Technical specifications
-
Read moreAlcad DI-213 – Serie 913: If splitter, 2 out with dc path for 913.
2 output splitter which covers frequencies up to 2,400 MHz. Permits current path from the input to all its outputs. Used to feed intermediate active multiswitches starting from only one amplifier in the head-end.
Downloads
Technical specification
Technical specification
Manuals
– pdf 374.09 KB
Catalogues
CAT_MMTV_EN_REDUCED pdf 4.43 MB
Technical specifications
-
Read moreAlcad DI-413 – Serie 913: If splitter, 4 out with dc path for 913.
Four output splitter which covers frequencies up to 2,400 MHz. Permits current path from the input to all its outputs. Used to feed intermediate active multiswitches 913-MU series starting from only one amplifier in the head-end.
Downloads
Technical specification
Technical specification
Manuals
– pdf 374.09 KB
Catalogues
CAT_MMTV_EN_REDUCED pdf 4.43 MB
-
Alcad FU-513 Power supply unit 7.5 v for multiswitch
KSh15,196.00Add to cartAlcad FU-513 – Serie 913: Power supply unit 7.5 v for multiswitch.
Power sources feeding LNBs, amplifiers and active multiswitches to obtain the total necessary current for all the elements of the installation, including the LNBs.
Applications
Model FU-612 is used for installations with final and cascadable multiswitches and to supply power to the LNBs. The number of LNBs which can be powered varies, depending on the consumption of the LNBs (2.000mA = 8 LNB x 250mA/LNB). Model FU-513 is used for installations in cascade, and to supply power to amplifiers and active multiswitches.
Characteristics
Switched power sources protected against power surges and short circuits. They include a fuse which the installer can access. Power supply cables are provided for connection to the network and to the multiswitch or amplifier. Power supply jack connector, 9.5mm 2.1mm
Downloads
Technical specification
Technical specification
Manuals
– pdf 389.08 KB
– pdf 375.26 KB
– pdf 151.45 KB
– pdf 619.16 KB
– pdf 275.29 KB
Catalogues
CAT_MMTV_EN_REDUCED pdf 4.43 MB
Certificates
CE_Declaration-TV_Distribution pdf 269.31 KB
Technical specifications
-
Alcad FU-612 Power supply unit 18 v for multiswitch
KSh17,134.00Add to cartAlcad FU-612 – Serie 913: Power supply unit 18 v for multiswitch.
Power sources feeding LNBs, amplifiers and active multiswitches to obtain the total necessary current for all the elements of the installation, including the LNBs.
Applications
Model FU-612 is used for installations with final and cascadable multiswitches and to supply power to the LNBs. The number of LNBs which can be powered varies, depending on the consumption of the LNBs (2.000mA = 8 LNB x 250mA/LNB). Model FU-513 is used for installations in cascade, and to supply power to amplifiers and active multiswitches.
Characteristics
Switched power sources protected against power surges and short circuits. They include a fuse which the installer can access. Power supply cables are provided for connection to the network and to the multiswitch or amplifier. Power supply jack connector, 9.5mm 2.1mm
Downloads
Technical specification
Technical specification
Manuals
– pdf 255.88 KB
– pdf 235.3 KB
– pdf 389.08 KB
– pdf 375.26 KB
– pdf 151.45 KB
– pdf 275.29 KB
Catalogues
CAT_MMTV_EN_REDUCED pdf 4.43 MB
Certificates
CE_Declaration-TV_Distribution pdf 269.31 KB
Technical specifications
-
Alcad MU-310 5×8 final multiswitch
KSh43,078.00Add to cartAlcad MU-310 – Serie 913: 5×8 final multiswitch.
Multiswitches for 4 polarities and terrestrial TV with 4, 8 or 16 outputs, for star-shaped installations. The tap outputs are amplified on the IF satellite band. Must be powered from each individual receiver to feed the switching and amplification of each tap output. To feed the LNBs, the FU-612 power supply unit is used.
Applications
Individual or SMATV installations, up to 16 TV outlets. Starshaped distribution from the multiswitch, with a single coaxial cable to each TV outlet. The multiswitch distributes a satellite polarity together with the terrestrial TV for each output. The polarity is selected from the individual receiver by means of the LNB control signals.
Characteristics
Return path included from 5 to 65 MHz. Shielded zamak chassis with plastic supports. F type connectors. Two power supply jacks, 9.5mm x 2.1mm. Distances of more than 75 m between multiswitch and outlet.
Downloads
Technical specification
Technical specification
Manuals
– pdf 186.18 KB
Catalogues
CAT_MMTV_EN_REDUCED pdf 4.43 MB
Certificates
CE_Declaration-TV_Distribution pdf 269.31 KB
Technical specifications
-
Alcad MU-320 5×8 cascadable multiswitch
KSh34,626.00Add to cartAlcad MU-320 – Serie 913: 5×8 cascadable multiswitch.
Multiswitches for 4 polarities and terrestrial TV with 8 or 16 outputs, for installations in cascade. The tap outputs are amplified on the IF satellite band. Power must be supplied from each individual receiver to feed the switching and amplification of each tap output.
Applications
Medium-sized to large MATV and SMATV installations. Enables distribution to up to 120 TV outlets in a single line, with power supplied only at the head-end of the cascade. By dividing the installation into lines of 120 outlets and distributing the 4 polarities and the terrestrial TV to all the lines, it is possible to reach more than 2,000 outlets. Distribution in cascade from the first multiswitch, with 5 coaxial cables between multiswitches and a single coaxial cable to each TV outlet. For each outlet, the multiswitch distributes a satellite polarity as well as the terrestrial TV. The polarity is selected from the individual receiver using the LNB control signals.
Characteristics
Return path included from 5 to 65MHz. Shielded zamak chassis with plastic supports. F type connectors. Distances of more than 75m between multiswitch and outlet. Up to 100 terrestrial TV channels.
Downloads
Technical specification
Technical specification
Manuals
– pdf 275.29 KB
Catalogues
CAT_MMTV_EN_REDUCED pdf 4.43 MB
Certificates
CE_Declaration-TV_Distribution pdf 269.31 KB
Technical specifications
-
Alcad MU-321 Cascadable multiswitch, 5×8 actif
KSh42,510.00Add to cartAlcad MU-321 – Serie 913: Cascadable multiswitch, 5×8 actif.
Multiswitches for 4 polarities and terrestrial TV with 4, 8 or 16 outputs, for installations in cascade. The inputs of the 4 polarities and the terrestrial TV are amplified. The tap outlets are amplified on the IF satellite band. Power must be supplied from the inputs or the through outputs to feed the built-in line amplifiers. Must be powered from each individual receiver to feed the switching and amplification of each tap output. To feed the active multiswitches, the FU-513 power unit is used; it is connected to the AU-620 amplifier of the cascade.
Applications
Medium-sized to large MATV and SMATV installations. Enables distribution to up to 120 TV outlets in a single line, with power supplied only at the head-end of the cascade. By dividing the installation into lines of 120 outlets and distributing the 4 polarities and the terrestrial TV to all the lines, it is possible to reach more than 2,000 outlets. Distribution in cascade from the first multiswitch, with 5 coaxial cables between multiswitches and a single coaxial cable to each TV outlet. For each outlet, the multiswitch distributes a satellite polarity as well as the terrestrial TV. The polarity is selected from the individual receiver using the LNB control signals.
Characteristics
Return path included from 5 to 65MHz. Shielded zamak chassis with plastic supports. F-type connectors. Distances of more than 75m between multiswitch and outlet. Up to 100 terrestrial TV channels.
Downloads
Technical specification
Technical specification
Manuals
– pdf 275.29 KB
Catalogues
CAT_MMTV_EN_REDUCED pdf 4.43 MB
Certificates
CE_Declaration-TV_Distribution pdf 269.31 KB
Technical specifications
-
Alcad MU-330 9×8 final multiswitch
KSh53,184.00Add to cartAlcad MU-330 – Serie 913: 9×8 final multiswitch.
Multiswitches for 8 polarities and terrestrial TV with 4, 8 or 16 outputs, for star-shaped installations. The tap outputs are amplified on the IF satellite and terrestrial TV bands. The tap outputs are amplified on the IF satellite band. Must be powered from each individual receiver to feed the switching and amplification of each tap output. To feed the LNBs, the FU-612 power supply unit is used.
Applications
Individual or SMATV installations, up to 16 TV outlets. Star- haped distribution from the multiswitch, with a single coaxial cable to each TV outlet. The multiswitch distributes a satellite polarity together with the terrestrial TV for each output. The polarity is selected from the individual receiver by means of the LNB and tone burst control signals, or the DiSEqC (Version 1.0 and later) signal.
Characteristics
Return path included from 5 to 65 MHz. Shielded zamak chassis with plastic supports. F type connectors. Power supply jack, 9.5mm x 2.1mm. Distances of more than 75 m between multiswitch and outlet.
Downloads
Technical specification
Technical specification
Manuals
– pdf 255.88 KB
Catalogues
CAT_MMTV_EN_REDUCED pdf 4.43 MB
Certificates
CE_Declaration-TV_Distribution pdf 269.31 KB
Technical specifications
-
Alcad MU-340 9×8 cascadable multiswitch
KSh50,964.00Add to cartAlcad MU-340 – Serie 913: 9×8 cascadable multiswitch.
Multiswitches for 4 polarities and terrestrial TV with 8 or 16 outputs, for installations in cascade. The tap outputs are amplified on the IF satellite band. Power must be supplied from each individual receiver to feed the switching and amplification of each tap output.
Applications
Medium-sized to large MATV and SMATV installations. Enables distribution to up to 120 TV outlets in a single line, with power supplied only at the head-end of the cascade. By dividing the installation into lines of 120 outlets and distributing the 4 polarities and the terrestrial TV to all the lines, it is possible to reach more than 2,000 outlets. Distribution in cascade from the first multiswitch, with 5 coaxial cables between multiswitches and a single coaxial cable to each TV outlet. For each outlet, the multiswitch distributes a satellite polarity as well as the terrestrial TV. The polarity is selected from the individual receiver using the LNB control signals.
Characteristics
Return path included from 5 to 65MHz. Shielded zamak chassis with plastic supports. F type connectors. Distances of more than 75m between multiswitch and outlet. Up to 100 terrestrial TV channels.
Downloads
Technical specification
Technical specification
Manuals
– pdf 251.1 KB
Catalogues
CAT_MMTV_EN_REDUCED pdf 4.43 MB
Certificates
CE_Declaration-TV_Distribution pdf 269.31 KB
Technical specifications
-
Alcad MU-341 Cascadable multiswitch, 9×8 actif
KSh57,054.00Add to cartAlcad MU-341 – Serie 913: Cascadable multiswitch, 9×8 actif.
Multiswitches for 8 and 16 polarities and terrestrial TV with 8 or 16 outputs, for installations in cascade. The inputs of the 8 polarities and the terrestrial TV are amplified. For 16 polarities, 2 stacked multiswitches of 8 polarities are installed and an external DiSEqC switch (CN-611) for each output. The tap outlets are amplified on the IF satellite band. Power must be supplied from the inputs or the through outputs to feed the built-in line amplifiers. Power must be supplied from each individual receiver to feed the switching and amplification of each tap output. To feed the active multiswitches, the FU-513 power unit is used; it is connected to the AU-620 amplifier of the cascade.
Applications
Medium-sized to large MATV and SMATV installations. Enables distribution to up to 128 TV outlets in a single line, with power supplied only at the head-end of the cascade. By dividing the installation into lines of 128 outlets and distributing the 8 polarities and the terrestrial TV to all the lines, it is possible to reach more than 2,000 outlets. Distribution in cascade from the first multiswitch, with 9 coaxial cables between multiswitches and a single coaxial cable to each TV outlet. For each outlet, the multiswitch distributes a satellite polarity as well as the terrestrial TV. For 8 polarities, the polarity is selected from the individual receiver using the LNB control signals and tone burst or using the DiSEqC signals (version 1.0 or higher); for 16 polarities, polarity is selected using only the DiSEqC signals.
Characteristics
Return path included from 5 to 65MHz. Shielded zamak chassis with plastic supports. F-type connectors. Distances of more than 75m between multiswitch and outlet. Up to 100 terrestrial TV channels.
Downloads
Technical specification
Technical specification
Manuals
– pdf 251.1 KB
Catalogues
CAT_MMTV_EN_REDUCED pdf 4.43 MB
Certificates
CE_Declaration-TV_Distribution pdf 269.31 KB
Technical specifications
-
Alcad MU-610 5×16 final multiswitch
KSh75,704.00Add to cartAlcad MU-610 – Serie 913: 5×16 final multiswitch.
Multiswitches for 4 polarities and terrestrial TV with 4, 8 or 16 outputs, for star-shaped installations. The tap outputs are amplified on the IF satellite band. Must be powered from each individual receiver to feed the switching and amplification of each tap output. To feed the LNBs, the FU-612 power supply unit is used.
Applications
Individual or SMATV installations, up to 16 TV outlets. Starshaped distribution from the multiswitch, with a single coaxial cable to each TV outlet. The multiswitch distributes a satellite polarity together with the terrestrial TV for each output. The polarity is selected from the individual receiver by means of the LNB control signals.
Characteristics
Return path included from 5 to 65 MHz. Shielded zamak chassis with plastic supports. F type connectors. Two power supply jacks, 9.5mm x 2.1mm. Distances of more than 75 m between multiswitch and outlet.
Downloads
Technical specification
Technical specification
Manuals
– pdf 186.18 KB
Catalogues
CAT_MMTV_EN_REDUCED pdf 4.43 MB
Certificates
CE_Declaration-TV_Distribution pdf 269.31 KB
Technical specifications
-
Alcad MU-620 5×16 cascadable multiswitch
KSh57,206.00Add to cartAlcad MU-620 – Serie 913: 5×16 cascadable multiswitch.
Multiswitches for 4 polarities and terrestrial TV with 8 or 16 outputs, for installations in cascade. The tap outputs are amplified on the IF satellite band. Power must be supplied from each individual receiver to feed the switching and amplification of each tap output.
Applications
Medium-sized to large MATV and SMATV installations. Enables distribution to up to 120 TV outlets in a single line, with power supplied only at the head-end of the cascade. By dividing the installation into lines of 120 outlets and distributing the 4 polarities and the terrestrial TV to all the lines, it is possible to reach more than 2,000 outlets. Distribution in cascade from the first multiswitch, with 5 coaxial cables between multiswitches and a single coaxial cable to each TV outlet. For each outlet, the multiswitch distributes a satellite polarity as well as the terrestrial TV. The polarity is selected from the individual receiver using the LNB control signals.
Characteristics
Return path included from 5 to 65MHz. Shielded zamak chassis with plastic supports. F type connectors. Distances of more than 75m between multiswitch and outlet. Up to 100 terrestrial TV channels.
Downloads
Technical specification
Technical specification
Manuals
– pdf 275.29 KB
Catalogues
CAT_MMTV_EN_REDUCED pdf 4.43 MB
Certificates
CE_Declaration-TV_Distribution pdf 269.31 KB
Technical specifications
-
Alcad MU-621 Cascadable multiswitch, 5×16 actif
KSh65,092.00Add to cartAlcad MU-621 – Serie 913: Cascadable multiswitch, 5×16 actif.
Multiswitches for 4 polarities and terrestrial TV with 4, 8 or 16 outputs, for installations in cascade. The inputs of the 4 polarities and the terrestrial TV are amplified. The tap outlets are amplified on the IF satellite band. Power must be supplied from the inputs or the through outputs to feed the built-in line amplifiers. Must be powered from each individual receiver to feed the switching and amplification of each tap output. To feed the active multiswitches, the FU-513 power unit is used; it is connected to the AU-620 amplifier of the cascade.
Applications
Medium-sized to large MATV and SMATV installations. Enables distribution to up to 120 TV outlets in a single line, with power supplied only at the head-end of the cascade. By dividing the installation into lines of 120 outlets and distributing the 4 polarities and the terrestrial TV to all the lines, it is possible to reach more than 2,000 outlets. Distribution in cascade from the first multiswitch, with 5 coaxial cables between multiswitches and a single coaxial cable to each TV outlet. For each outlet, the multiswitch distributes a satellite polarity as well as the terrestrial TV. The polarity is selected from the individual receiver using the LNB control signals.
Characteristics
Return path included from 5 to 65MHz. Shielded zamak chassis with plastic supports. F-type connectors. Distances of more than 75m between multiswitch and outlet. Up to 100 terrestrial TV channels.
Downloads
Technical specification
Technical specification
Manuals
– pdf 275.29 KB
Catalogues
CAT_MMTV_EN_REDUCED pdf 4.43 MB
Certificates
CE_Declaration-TV_Distribution pdf 269.31 KB
Technical specifications
-
Alcad MU-630 9×16 final multiswitch
KSh90,426.00Add to cartAlcad MU-630 – Serie 913: 9×16 final multiswitch.
Multiswitches for 8 polarities and terrestrial TV with 4, 8 or 16 outputs, for star-shaped installations. The tap outputs are amplified on the IF satellite and terrestrial TV bands. The tap outputs are amplified on the IF satellite band. Must be powered from each individual receiver to feed the switching and amplification of each tap output. To feed the LNBs, the FU-612 power supply unit is used.
Applications
Individual or SMATV installations, up to 16 TV outlets. Star- haped distribution from the multiswitch, with a single coaxial cable to each TV outlet. The multiswitch distributes a satellite polarity together with the terrestrial TV for each output. The polarity is selected from the individual receiver by means of the LNB and tone burst control signals, or the DiSEqC (Version 1.0 and later) signal.
Characteristics
Return path included from 5 to 65 MHz. Shielded zamak chassis with plastic supports. F type connectors. Power supply jack, 9.5mm x 2.1mm. Distances of more than 75 m between multiswitch and outlet.
Downloads
Technical specification
Technical specification
Manuals
– pdf 255.88 KB
Catalogues
CAT_MMTV_EN_REDUCED pdf 4.43 MB
Technical specifications
-
Alcad MU-640 9×16 cascadable multiswitch
KSh79,220.00Add to cartAlcad MU-640 – Serie 913: 9×16 cascadable multiswitch.
Multiswitches for 4 polarities and terrestrial TV with 8 or 16 outputs, for installations in cascade. The tap outputs are amplified on the IF satellite band. Power must be supplied from each individual receiver to feed the switching and amplification of each tap output.
Applications
Medium-sized to large MATV and SMATV installations. Enables distribution to up to 120 TV outlets in a single line, with power supplied only at the head-end of the cascade. By dividing the installation into lines of 120 outlets and distributing the 4 polarities and the terrestrial TV to all the lines, it is possible to reach more than 2,000 outlets. Distribution in cascade from the first multiswitch, with 5 coaxial cables between multiswitches and a single coaxial cable to each TV outlet. For each outlet, the multiswitch distributes a satellite polarity as well as the terrestrial TV. The polarity is selected from the individual receiver using the LNB control signals.
Characteristics
Return path included from 5 to 65MHz. Shielded zamak chassis with plastic supports. F type connectors. Distances of more than 75m between multiswitch and outlet. Up to 100 terrestrial TV channels.
Downloads
Technical specification
Technical specification
Manuals
– pdf 251.1 KB
Catalogues
CAT_MMTV_EN_REDUCED pdf 4.43 MB
Technical specifications
-
Alcad MU-641 Cascadable multiswitch, 9×16 actif
KSh89,392.00Add to cartAlcad MU-641 – Serie 913: Cascadable multiswitch, 9×16 actif.
Multiswitches for 8 and 16 polarities and terrestrial TV with 8 or 16 outputs, for installations in cascade. The inputs of the 8 polarities and the terrestrial TV are amplified. For 16 polarities, 2 stacked multiswitches of 8 polarities are installed and an external DiSEqC switch (CN-611) for each output. The tap outlets are amplified on the IF satellite band. Power must be supplied from the inputs or the through outputs to feed the built-in line amplifiers. Power must be supplied from each individual receiver to feed the switching and amplification of each tap output. To feed the active multiswitches, the FU-513 power unit is used; it is connected to the AU-620 amplifier of the cascade.
Applications
Medium-sized to large MATV and SMATV installations. Enables distribution to up to 128 TV outlets in a single line, with power supplied only at the head-end of the cascade. By dividing the installation into lines of 128 outlets and distributing the 8 polarities and the terrestrial TV to all the lines, it is possible to reach more than 2,000 outlets. Distribution in cascade from the first multiswitch, with 9 coaxial cables between multiswitches and a single coaxial cable to each TV outlet. For each outlet, the multiswitch distributes a satellite polarity as well as the terrestrial TV. For 8 polarities, the polarity is selected from the individual receiver using the LNB control signals and tone burst or using the DiSEqC signals (version 1.0 or higher); for 16 polarities, polarity is selected using only the DiSEqC signals.
Characteristics
Return path included from 5 to 65MHz. Shielded zamak chassis with plastic supports. F-type connectors. Distances of more than 75m between multiswitch and outlet. Up to 100 terrestrial TV channels.
Downloads
Technical specification
Technical specification
Manuals
– pdf 251.1 KB
Catalogues
CAT_MMTV_EN_REDUCED pdf 4.43 MB
Technical specifications
-
Amplifier 13×13 F G4/31/27 Vs105 Nevoswitch Televes
KSh84,700.00 -
EuroSwitch 17 inputs – 16 outputs Televes
KSh243,936.00Add to cartCompact multiswitch equipped with 17 inputs (one terrestrial and 16 for four satellites, each with its four polarities) and 16 user outputs.
-
EuroSwitch 17 inputs – 24 outputs Televes
KSh366,388.00Add to cartCompact multiswitch equipped with 17 inputs (one terrestrial and 16 for four satellites, each with its four polarities) and 24 user outputs.
Thanks to its great compactness and its optimized electronic design, it presents very low through and tap losses. This allows to reduce the number of amplifiers needed in the cascade and to obtain a better balanced signal in the users, even in large collective installations.
Can be used as a terminal (star topology) or as a cascade by using a simple switch. In addition, it incorporates a second switch that actives the TForce technology, which automatically adjusts the terrestrial signal and keep it constant despite variations in the reception.
Highlights
Very compact in dimensions and weight, even in models with high number of users
Very low through and tap losses
Wide 12-18V power supply range, making it compatible with most existing systems
Equipped with the TForce technology, the terrestrial output level is automatically adjusted (TERR. AMP. ACTIVE) to the optimal level
Great isolation between inputs and outputs
100% european design, quality, and manufacturing
Main features
High shielding: A class
Input and output colour identification
Low consumption under normal conditions. In addition, ECO mode reduces consumption as the number of connected users decreases
Versatile: selector switch to shift between cascade and terminal modes
Two powering options: From the power supply, or from the cascade through the satellite inputs or outputs
Current circulation between all inputs and cascades
Specifications
Type ? 17x17x24
Frequency range MHz SAT 950 ? 2200 / 2400
RF 120 ? 862
Input level dB?V SAT 65 … 112
RF 80 … 110
Through losses dB SAT <3 ... 4.5/5,5 RF <4,5 Tap losses dB SAT 2 ... 7 RF Active 2 Pasive 34 Output level dB?V 10 Ch?s DTT 78 Isolation dB Trunk > 50
Users > 30
Powering V ? 12 – 18
Max. consumption mA PSU1 Active 115
Pasive 5
Receiver 85
Operating temperature ?C ? ?5?.+45
Protection level IP ? IP20 -
EuroSwitch 17 inputs – 32 outputs Televes
KSh488,356.00Add to cartCompact multiswitch equipped with 17 inputs (one terrestrial and 16 for four satellites, each with its four polarities) and 32 user outputs.
Thanks to its great compactness and its optimized electronic design, it presents very low through and tap losses. This allows to reduce the number of amplifiers needed in the cascade and to obtain a better balanced signal in the users, even in large collective installations.
Can be used as a terminal (star topology) or as a cascade by using a simple switch. In addition, it incorporates a second switch that actives the TForce technology, which automatically adjusts the terrestrial signal and keep it constant despite variations in the reception.
Highlights
Very compact in dimensions and weight, even in models with high number of users
Very low through and tap losses
Wide 12-18V power supply range, making it compatible with most existing systems
Equipped with the TForce technology, the terrestrial output level is automatically adjusted (TERR. AMP. ACTIVE) to the optimal level
Great isolation between inputs and outputs
100% european design, quality, and manufacturing
Main features
High shielding: A class
Input and output colour identification
Low consumption under normal conditions. In addition, ECO mode reduces consumption as the number of connected users decreases
Versatile: selector switch to shift between cascade and terminal modes
Two powering options: From the power supply, or from the cascade through the satellite inputs or outputs
Current circulation between all inputs and cascades
Specifications
Type ? 17x17x32
Frequency range MHz SAT 950 ? 2200 / 2400
RF 120 ? 862
Input level dB?V SAT 65 … 112
RF 80 … 110
Through losses dB SAT <4 ... 5.5/6,5 RF < 5 Tap losses dB SAT 2 ... 7 RF Active 5 Pasive 36 Output level dB?V 10 Ch?s DTT 78 Isolation dB Trunk > 50
Users > 30
Powering V ? 12 – 18
Max. consumption mA PSU1 Active 115
Pasive 5
Receiver 85
Operating temperature ?C ? ?5?.+45
Protection level IP ? IP20 -
EuroSwitch 17 inputs – 8 outputs Televes
KSh121,964.00Add to cartCompact multiswitch equipped with 17 inputs (one terrestrial and 16 for four satellites, each with its four polarities) and 8 user outputs.
-
EuroSwitch 9 inputs – 12 outputs Televes
KSh76,810.00Add to cartCompact multiswitch equipped with 9 inputs (one terrestrial and 8 for two satellites, each with its four polarities) and 12 user outputs.
-
EuroSwitch 9 inputs – 16 outputs Televes
KSh108,408.00Add to cartCompact multiswitch equipped with 9 inputs (one terrestrial and 8 for two satellites, each with its four polarities) and 16 user outputs.
-
EuroSwitch 9 inputs – 24 outputs Televes
KSh196,488.00Add to cartCompact multiswitch equipped with 9 inputs (one terrestrial and 8 for two satellites, each with its four polarities) and 24 user outputs.
-
EuroSwitch 9 inputs – 32 outputs Televes
KSh216,816.00Add to cartCompact multiswitch equipped with 9 inputs (one terrestrial and 8 for two satellites, each with its four polarities) and 32 user outputs.
-
EuroSwitch 9 inputs – 8 outputs Televes
KSh54,212.00Add to cartCompact multiswitch equipped with 9 inputs (one terrestrial and 8 for two satellites, each with its four polarities) and 8 user outputs.
-
EuroSwitch amplifier 17 inputs 27/31dB Televes
KSh108,408.00Add to cartCompact amplifier equipped with 17 inputs (one terrestrial and the four polarities of four satellites) that allows increasing the number of users in the installation while optimizing the signal received by each of them. Around 27 dB and 31 dB amplification in terrestrial and satellite respectively.
Highlights
Very compact in dimensions and weight
High output level
Switch to supply power to the terrestrial trunk line (PWR TERR), allowing to power headend installed elements such as intelligent antennas or amplifiers
Gain (20 dB) and slope (12 dB) individual adjustment
Wide 12-18V power supply range, making it compatible with most existing systems
100% european design, quality, and manufacturing
Main features
Made of zamak
Input and output colour identification
Two powering options: From the power supply, or from the cascade through the satellite inputs or outputs
Low power consumption
Specifications
Type ? 17×17
Frequency range MHz SAT 950 ? 2400
RF ? 88 ? 862
Output level dB?V SAT EN50083-3
IM35dBc 118
RF DIN 45004-B 114
Gain dB SAT 31
RF 27
Regulation 0 … 20
Slope 0 … 12
Isolation dB ? >30
Powering V ? 12 … 18
Max. total consumption A @12 -18V 1,15 – 0,765
Max. power consumption W ? 13,8
Temperatura Range ?C ? ?5?.+45
Protection level IP ? IP20 -
EuroSwitch amplifier 9 inputs 27/31 dB Televes
KSh67,762.00Add to cartCompact amplifier equipped with 9 inputs (one terrestrial and the four polarities of two satellites) that allows increasing the number of users in the installation while optimizing the signal received by each of them. Amplification around 27 dB for terrestrial, and 31 dB for satellite.
-
Ikusi DMS-300 Terrestrial satellite combiner
KSh3,094.00Add to cartIKUSI DMS-300. TV – IF Combiners – 2150 MHz
Features
Nickel-plated zinc die cast housing.
Grounding facilities.
Female F ports.
Technical specifications
? ? ? ? ? ? ? ? ?DMS-300
RF inputs 3
TV (5 ? 862 MHz),
IF-1 (950 ? 2150 MHz),
IF-2 (950 ? 2150 MHz)
RF outputs? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? 2
? ? ? TV + IF-1??????? TV + IF-2
Insertion loss dB TV: ? 4, IF-1/IF-2: ? 2
Input isolation dB ? 25
Power passing to IF input/s ? Yes (18 V/500 mA max)
Dimensions mm 122 x 45 x 20?
MANUAL/DATASHEET
-
Add to cartInverto?s Unicable II Programmer is an essential installation tool helping to configure and diagnose any Unicable II LNB or Multiswitch using a PC. The Inverto?s Unicable II Programmer software tool for PC provides an easy to use and intuitive graphic user interface allowing the installer to modify the default parameters of the installed Unicable II LNB or Multiswitch including for example, the operating mode (Static or Dynamic), the RF/IF frequency mapping grid for Static mode, the IF frequencies of the User Bands, the output power level and the protocols used over each User Band (EN50494/EN50607).
The PC software tool allows to carry out diagnostic tests on the connected LNB or Multiswitch, retrieve diagnostic logs and identify potential installation health issues. The programmer provides several options for updating the firmware or the configuration file of the connected LNB or Multiswitch through the PC. It also features an internal memory that can store a configuration file prepared on the PC and transmit it later to a connected LNB or Multiswitch in the field by pressing a dedicated button releasing the installer from carrying his laptop to the field.
The Programmer device can be integrated into an existing installation, power the LNB or Multiswitch unit using the supplied AC/DC power adapter, and allow a parallel connection to a PC over USB for monitoring and configuration.
The Programmer is supplied with an external AC/DC adapter and a USB cable.
Setup diagram
??
?
?
User Band and Protocol testing tool
?
Static mapping editing tool
?
Unicable II??LNB configuration screen
?
Unicable II??Multiswitch configuration screen
?
Specifications
Inverto IDLU-PROG01-OOOOO-OPPInterfaces
?
?
1x Satellite IF, F-type
1x Satellite IF loop-through out, F-type
1x USB (Type-B)
Loop-through loss 1dB max.
Control protocols:
?
DiSEqC? commands extension according to CENELEC EN50494???? and/or EN50607, DiSEqC2.0.
Display and keysActivity LED
?
Yellow blinking:? Communication activity between ODU and Programmer
Green: Configuration files in ODU and Programmer are identical
Power LED
?
Red: The Programmer is powered over the USB connection
Orange: The Programmer is powered over the 12V DC input
Button
?
?
?
Short press: Transmit a configuration file stored in the Programmer to the ODU device
Long press: Download the configuration file of the ODU and compare to a file stored in the Programmer?
Power consumption
Programmer only 5VDC, 50mA (can be powered over the USB interface)ODU power
?
13V-18V, 600mA max. – powering and programming of an ODU device requires use of the supplied AC/DC adapter
Dimensions 107mm x 77mm x 30 (W x D x H)AC/DC adapter
?
?
?
?
?
?
Input voltage: 100-240VAC, 50/60Hz, 0.8A?max.?
Output voltage:?12VDC
Output current:?2A?
Short circuit protection:?Yes
Low Voltage Directive?(2014/35/EU)
Electromagnetic Compatibility Directive?(2014/30/EU)
Eco-Design Directive (2009/125/EC)
-
Read moreIDLU-ADPT03-19342-OPP.?This power supply adapter is designed to power up to four cascaded units of 4-output Unicable II??multiswitches or two 8-output multiswitches and the connected Quattro LNB (or two wideband LNBs) over the trunk lines or the DC input port. It features high current and over voltage protection and a built-in fuse protecting against power line surges and abnormal conditions and is ideal for building/MDU installations of cascaded systems.
Specifications
Inverto – 5423 IDLU-ADPT03-19342-OPP
Input voltage 100 VAC ~ 240 VAC
Input frequency 50 Hz/60 Hz
Output voltage 19 VDC
Output current 3.42 A
Output connector F-type (male)
Cable length (AC) 1.8 m
Cable length (DC) 1.5 m
Product dimensions (L x W x H)? 11.5 cm x 5.5 cm x 3.5 cm
Working temperature 0 ?C ~ +40 ?C
Weight 250 g
Compliance Low Voltage Directive (2014/35/EU)
Electromagnetic Compatibility Directive (2014/30/EU)
Eco-Design Directive (2009/125/EC) -
Read moreInverto Combiner for connecting two Unicable LNBs or multi-switches.
With the help of the Inverto Combinator, you connect two Unicable Inverto multicasts or LNBs (not supported by each model) to a receiving unit for receiving multiple satellites. For this purpose, the LNBs / multicasts must be programmed accordingly in order to be able to react correctly to the incoming position requests (DiSEqC). A special programming device is needed for this.
Specs
Ref 1 5381
Ref 2 IDLU-UCM1O1-OOO2O-OPP
Frequency Range 5 – 2400MHz
Inputs 2x F-Type, female
Output 1x F-Type, female
Insertion Loss 4dB max.
Isolation between ports 5-47MHz 8dB
Isolation between ports 47-2400MHz 16dB min.
Input Return Loss -10dB max.
Output Return loss -8dB max.
DC & 22kHz pass from Output to Input Yes
Impedance 75?
Working Temperature -30 ~ +60?C
Weight 40g
Dimensions 48.5×34.9×14.2mm -
Read moreInverto Combiner for connecting two Unicable LNBs or multi-switches.
With the help of the Inverto Combinator, you connect two Unicable Inverto multicasts or LNBs (not supported by each model) to a receiving unit for receiving multiple satellites. For this purpose, the LNBs / multicasts must be programmed accordingly in order to be able to react correctly to the incoming position requests (DiSEqC). A special programming device is needed for this.
Specs
Ref 1 5381
Ref 2 IDLU-UCM1O1-OOO2O-OPP
Frequency Range 950 – 2400MHz
Inputs 2x F-Type, female
Output 1x F-Type, female
Insertion Loss 4dB max.
Isolation between ports 5-47MHz 8dB
Isolation between ports 47-2400MHz 16dB min.
Input Return Loss -10dB max.
Output Return loss -8dB max.
DC & 22kHz pass from Output to Input Yes
Impedance 75?
Working Temperature -30 ~ +60?C
Weight 40g
Dimensions 48.5×34.9×14.2mm -
Inverto Unicable 2, Power inserter 5-2400 MHz
KSh5,324.00Add to cartUse o Power Inserter no caso de cabos longos e/ou divis?o m?ltipla de sinal
Inverto IDLU-PINS02-OOOOO-OPP
Frequency Range 5 – 2400MHz
DC In 19V/1A, 1x F-Type, female
ODU Input (IF) 1x F-Type, female
STB Output (IF) 1x F-Type, female
Insertion Loss 3dB max.
Input Return Loss -10dB max.
Output Return loss -10dB max.
Max current flow-through 750mA
Output Voltage (Input @19V, 940mA) 17V
Working Temperature -30 ~ +60?C
Weight 81g
Dimensions 65x75x17.3mmNote: Supplied together with AC/DC power adapter unit
-
Add to cartNumber of inputs 2 SAT + 1 TERR
Return signal Tone Burst and DiSEqC 1.0
Frequency range Terr.: 40-860 MHz – Sat.:950-2150 MHz
Insertion loss Terr.: 2 dB – Sat./Terr.: 3 dB ? 1 dB
Terr./Sat. Rejection: 30 dB min. – Sat./Terr.: 20 dB min.
Rejection between inputs 15 dB min.
Switchable ground current path
Consumption 25mA max.
Dimensions 112 x 98 x 56mm -
Johansson 9210 Switch Diseqc 4 inputs
KSh3,834.00Add to cartNumber of inputs 4
DiSEqC 1.0 control signal
Frequency range 950-2150MHz
Insertion loss 2 dB max.
Rejection 30dB min.
Consumption 25mA max.
Dimensions 112 x 98 x 56mm -
Add to cartNumber of inputs 3 SAT + 1 TERR
Return signal DiSEqC 1.0/1.1
Frequency range Terr.: 40-860 MHz – Sat.:950-2150 MHz
Insertion loss Terr.: 2 dB – Sat./Terr.: 3 dB ? 1 dB
Terr./Sat. Rejection: 30 dB min. – Sat./Terr.: 20 dB min.
Rejection between inputs 15 dB min.
Ground current pass switchable
Consumption 25mA max.
Dimensions 112 x 98 x 56mm -
Add to cartNumber of inputs 4 SAT + 1 TERR
Return signal DiSEqC 1.0/1.1
Frequency range Terr.: 40-860 MHz – Sat.:950-2150 MHz
Insertion loss Terr.: 2 dB – Sat./Terr.: 3 dB ? 1 dB
Terr./Sat. Rejection: 30 dB min. – Sat./Terr.: 20 dB min.
Rejection between inputs 15 dB min.
Ground current pass switchable
Consumption 25mA max.
Dimensions 112 x 98 x 56mm -
Johansson 9215 Switch Diseqc 3 inputs
KSh3,770.00Add to cartNumber of entries 3
DiSEqC 1.0 control signal
Frequency range 950-2150MHz
Insertion loss 2 dB max.
Rejection 15dB min.
Consumption 25mA max.
Dimensions 112 x 98 x 56mm -
Add to cart2 x 2 SAT input (2 Twin LNBs) + 1 terr. 2 output.
Switch for 2 TWIN LNB?s combined with terrestrial.
Specifications
Frequency range MHz SAT.: 950 – 2150
Terr.: 5-862
Insertion loss dB SAT.: 4 max.
Terr.: 8 max.
Switching control dB Tone Burst and DiSEqC 1.0 / 1.1
Isolation each SAT in / out dB 40 min.
Isolation SAT / TERR dB 30 min.
Current mA 20 mA per receiver
DC power pass on SAT inputs mA 350 max.
Dimensions mm 112 x 98 x 56 -
Add to cartTerrestrial and satellite signal combiner. 2 inputs: MATV-SAT 2-input combiner that combines a terrestrial signal with a satellite signal into a single output. Can be used as GSM filter, thanks to the high TV-SAT rejection Highlights High-screening Zamak chassis Current pass from the output to the SAT input, for LNB supply Features Indoor or outdoor …
Mixer MATV-FI 2e / 1s F 47..790-950..2400MHz + DC TelevesRead More
-
-
-
-
-
-
Add to cartRange of 9 input multiswitches available in 8,12,16,24 and 32 user outputs. It has 9 outputs which allow us to expand the number of users by cascading two ore more units. Using a switch, we can load the unit (standalone) or not (cascade configurations).
-
Add to cartMultiswitches with 9 inputs and 16 outputs. They have 9 signal extension outputs to develop cascade installations and thus increase the number of users.
-
Add to cartMultiswitches with 9 inputs and 24 outputs. They have 9 signal extension outputs to develop cascade installations and thus increase the number of users.
-
Add to cartRange of 9 input multiswitches with 32 user outputs. It has 9 outputs which allow us to expand the number of users by cascading two ore more units. Using a switch, we can load the unit (standalone) or not (cascade configurations).
-
Add to cartMultiswitches with 9 inputs and 8 outputs. They have 9 signal extension outputs to develop cascade installations and thus increase the number of users.
-
-
Add to cartNevoSwitch amplifier with 5 inputs (one terrestrial and the four polarities of a satellite) that allows increasing the number of users of the installation by optimizing the signal that reaches each one. Amplification approx 12dB in terrestrial and 15dB in satellite. Televes 714508
-
-
-
Popular Products
-
Dual Monitor Arm for 13-32 inch Screens up to 19.8 lbs Each - Monitor Mounts for 2 Monitors - Dual Computer Monitor Stand for Desk VESA 75x75 100x100 Adjustable Gas Spring Desk Mount Black
-
Dual Monitor Arm White for 13-32 inch Screens up to 19.8 lbs Each - Monitor Mounts for 2 Monitors - Dual Computer Monitor Stand for Desk VESA 75x75 100x100 Adjustable Gas Spring Desk Mount
-
Single Monitor Desk Mount for 13-34 inch Flat/Curved Screens up to 26.5 lbs - Adjustable Monitor Stand Full Motion Gas Spring Monitor Arm Single Monitor Mount Ultrawide Monitor Arm Black
-
ONKRON Dual Monitor Arm Desk Mount for Two 13-32 Inch Monitors up to 19 lbs Each - Gas Spring Monitor Arm Mount, VESA 75x75-100x100, Dual Monitor Stand for Desk/Dual Monitor Mount Desk Black
-
ONKRON Mobile TV Stand with Wheels Rolling TV Stand for 40-80 Inch LED LCD Flat or Curved Screen TVs up to 122 lbs - Height Adjustable TV Cart with Shelves - Portable TV Stand (TS2771) Black
Products
-
Dual Monitor Arm for 13-32 inch Screens up to 19.8 lbs Each - Monitor Mounts for 2 Monitors - Dual Computer Monitor Stand for Desk VESA 75x75 100x100 Adjustable Gas Spring Desk Mount Black
-
Dual Monitor Arm White for 13-32 inch Screens up to 19.8 lbs Each - Monitor Mounts for 2 Monitors - Dual Computer Monitor Stand for Desk VESA 75x75 100x100 Adjustable Gas Spring Desk Mount
-
Single Monitor Desk Mount for 13-34 inch Flat/Curved Screens up to 26.5 lbs - Adjustable Monitor Stand Full Motion Gas Spring Monitor Arm Single Monitor Mount Ultrawide Monitor Arm Black
-
ONKRON Dual Monitor Arm Desk Mount for Two 13-32 Inch Monitors up to 19 lbs Each - Gas Spring Monitor Arm Mount, VESA 75x75-100x100, Dual Monitor Stand for Desk/Dual Monitor Mount Desk Black
-
ONKRON Mobile TV Stand with Wheels Rolling TV Stand for 40-80 Inch LED LCD Flat or Curved Screen TVs up to 122 lbs - Height Adjustable TV Cart with Shelves - Portable TV Stand (TS2771) Black