Alcad ZG-421 Ampli uhf adjacent 50db
KSh20,354.00
Alcad ZG-421 – Serie 905: Ampli uhf adjacent g=50db.
Monochannel amplifier for the UHF band designed to work with adjacent channels. It has a high selectivity which permits the independent equalisation of each adjacent channel. High gain and output level. The channel should be specified in the order.
Applications
Large, digital and analogue terrestrial MATV installations where adjacent analogue or digital channels exist. The different channels can be treated independently with this module which results in a perfect equalisation of all the received channels.
Characteristics
Specific design for adjacent channels, an optimum compromise between image and sound quality and equalisation capability can be achieved due to the high selectivity of the equipment. Each module consists of 3 input filters, amplifier and 2 output filters ? all the filters are cavities. There is an attenuator between stages to reduce the noise figure. Supplied with the multiplexing and diplexing bridges and power cable.
Downloads
Technical specification
Technical specification
Manuals
– pdf 165.67 KB
Catalogues
CATALOGUE_ALCAD_EN_MULTIMEDIA_TV pdf 5.42 MB
Certificates
CE Declaration ZG-421 pdf 48.63 KB
Related products
-
-
Add to cartThe market’s most sophisticated single-channel / multichannel amplifiers. Modular and expandable system. High reliability, thanks to its fully robotized manufacturing. Considerable improvement in the shield design. Possibility of feeding up to 24 modules through its switching power supply ref.549812. Configurable power preamplifiers via ON / OFF switch. Gain control. Total backward compatibility. Include?necessary elements for …
Single-channel amplifier T.12 FM BIII 174…230MHz 45dB TelevesRead More
-
Add to cartModule that amplifies the optical signal of 1550nm, generating an output power of 19dBm. Equipped with WDM, it has 1 input of 1310/1490nm with which it multiplexes the 1550nm amplified signal, offering 1 output 1310/1490/1550nm, for use in a GPON header (usually with an OLT512). Televes 234221
-
Alcad SP-245 Frame d47 for 2 psu and 8 modules
KSh5,870.00Add to cartAlcad SP-245 – Serie 912: Frame d47 for 2 psu and 8 modules.
Support frame for 912-series headends with redundant power supplies. It can hold up to 2 power supplies, one amplifier and 7 modules, or 2 power supplies and 8 modules. There is a 47 mm distance between modules to allow for better heat disipation.
Downloads
Technical specification
Technical specification
Catalogues
CATALOGUE_ALCAD_EN_MULTIMEDIA_TV pdf 5.42 MB
-
Alcad CMO-703 Ipal flush box for pdk-20003
KSh2,832.00Add to cartAlcad CMO-703 – Serie 974: Ipal flush box for pdk-20003.
To embed an entrance panel to the wall, it is necessary to previously place a flush-mount box where we will later fix the plate. This box is made of aluminum. It has some plates that allow to hold the entrance panel during installation, thus facilitating the work of connection and start-up of the different elements of the system.
Downloads
Technical specification
Technical specification
Catalogues
CATALOGUE_ALCAD_EN_DES pdf 5.85 MB
Reviews
There are no reviews yet.