TELEVES Nevoswitch 5x5x2 dSCR
TELEVES
Nevoswitch 5x5x2 dSCR
Cascade 5 In 2 Out dSCR or Legacy c/w DC
(Earth Bars Not Included) 2 Year Warranty
*Special Order! NCNR – Check Lead Time*
(May require PSU: 732210)
This 5 wire cascadable multiswitch supports SCR I (EN50494) and SCR II (EN
50607) standards and legacy mode, making the multiswitch compatible with any
existing or new set top box.
With 4 satellite inputs (Quattro) and terrestrial input, this multiswitch offers
a 2 user outputs, with up to 16 user bands each.
DCFLEX functionality
This exclusive functionality gives the product complete control and
flexibility to power the multiswitch from anywhere in the system. The
installer will have complete freedom to choose how to power the multiswitch
and will be able to choose the best to suit a particular scenario.
This versatility is achieved via a switch (DC LINK) that can be used to
isolate or not, from a DC point of view, the multiswitch from the
cascade.
Multiple powering options: Directly from a PSU, receiver outputs or line
power through the satellite inputs or outputs. Moreover, you could choose to
line power only the terrestrial side (TForce) of the multiswitch through the
terrestrial inputs or outputs.
It can be easily added to an existing system: You just need to connect a
power supply to the multiswitch and isolate it from the power on the cascade
(flick the DC link switch). The power of the existing system will pass
through the multiswitch unaltered and the dCSS NevoSwitch will only draw
power from its own power supply. This will avoid any possible problems
created by adding a new dCSS NevoSwitch to an existing system.
Increased safety for the set top boxes connected to the multiswitch, as
these are completely isolated from the power in the cascade, avoiding
potential issues with the power in the system affecting the end user
equipment.
Wide powering range: With voltages from 10V to 20V making it compatible
with most of the systems out there.
ECO mode: The multiswitch isolated from the cascade can reduce its power
consumption to zero when the set top boxes are turned off and terrestrial is
passive. In case TForce is activated, the consumption is only 50mA. This is
possible because the multiswitch will also dynamically adapt the way that
it’s powered in order to keep its consumption to the minimum. So it will
automatically turn off any part of the circuit that is not been used in order
to lower its consumption.
DCFLEX
HOW DOES THE DCFlex FUNCTIONALITY WORK? It can be controlled through the
following switches:
SAT DC LINK switch (ON/OFF): It isolates or connects the power of the
multiswitch to the power available from the cascade (satellite legs).
OFF (isolated from the cascade): The MSW is powered locally (power supply)
or from the user output without adding or drawing power from the
cascade.
ON (connected to the cascade): The MSW can add or draw (in the case that
needs powering) current from the cascade.
TERR. DC switch (ON/OFF): It isolates or connects the power available from
the cascade (only terrestrial leg). It can be useful to line power a masthead
amplifier or a BOSS antenna, but it can also be use to line power the
terrestrial side of other MSWs in the cascade.
RECEIVER POWER switch (ON/OFF): It controls the DC pass from the user
outputs towards the multiswitch. You can power the device from the dCSS set
top box (if there is enough power available) or a power inserter.
TFORCE
The dCSS NevoSwitch also incorporates the innovative TForce technology,
based on MMIC components and developed exclusively by Televes. TForce offers
an intelligent terrestrial level adjustment.
You can activate it or not by means of a switch making the multiswitch
active or passive on terrestrial.
In active mode, the MSW automatically adjust the terrestrial output level
to the optimum level.
In addition, this optimum level is kept balanced in every user output
through the dCSS cascade.
More features:
Compatible with existing Televes NevoSwitch and also with the non-Televes
IRS systems.
Chassis made of Zamak: Improved screening attenuation.
Versatile: Cascadable and standalone configuration in the same reference
(with the flick of a switch).
Small size and compact design (140x120x30mm).
European quality and design, 100% manufactured and verified in our
robotized lines.
SAT in
Frequency range MHz 950…2150
Input level dBµV 70 … 100
Through losses dB 2
Cross-polarity Isolation > 30
DTT in
Frequency range MHz 47… 862
Input level dBµV 65-110
(active: 70-95)
Terr. trunk power V / mA 10 … 20 / 500
Through losses dB < 2.5
dCSS OUT
dCSS user outputs No. 2
Output modes SCR I/II, Legacy
dCSS channel bandwidth MHz 46
dCSS user bands 2 x 16
dCSS standard EN50494
EN50607
Sky UK
Output level dBµV 84 ± 2
DTT OUT
Frequency range MHz 47… 862
Attenuation
(passive – TForce deactivated) dB -16
Automatic gain range
(TForce activated) dB 15… -10
Power consumption mA 50
Output level
(Amp. active / 2 channels) dBµV 87±3
(input 70-95uV)
POWER
Power supply voltage V oct-20
Maximum power consumption (@12V)
(dCSS + Terr. amp. + Auto Load) mA 340 + 50 + 10
DTT input supply current mA 500
User out max. current
(Receiver power ON) A 1
IF Trunk 4 lines max. current A 3
General
Operating temperature range ºC -5…45
ºF 23…113
Protection level IP 20
Dimensions (xyz) mm 140 x 120 x 30
More info
Related products
-
Read moreTELEVES Nevoswitch QUAD 9x9x16
CASCADE c/w 1.5A PSU – Receiver or
Line Powered (Earth Bars Not Included) 2 Year Warranty *Special Order! NCNR –
Check Lead Time* Highlights 10 dB Low Gain (LG) / High Gain (HG) switch
for the attenuation of the satellite input signal for each 8-user group
Optimized for Quad LNB thanks to a 22 KHz generator Compatible with
return-channel applications European design, quality, and manufacturing Main features Very compact Made of zamak Input and output
colour identification Available ECO mode Selector switch to shift between cascade
and terminal modes 12 V power supply Low power consumption -
Read moreTELEVES Nevoswitch QUAD 9x9x8
CASCADE c/w 1.5A PSU – Receiver or
Line Powered (Earth Bars Not Included) 2 Year Warranty *Special Order! NCNR –
Check Lead Time* Highlights 10 dB Low Gain (LG) / High Gain (HG) switch
for the attenuation of the satellite input signal for each 8-user group
Optimized for Quad LNB thanks to a 22 KHz generator Compatible with
return-channel applications European design, quality, and manufacturing Main features Very compact Made of zamak Input and output
colour identification Available ECO mode Selector switch to shift between cascade
and terminal modes 12 V power supply Low power consumption -
Read moreTELEVES 13x13x12 CASCADE Multiswitch 13 In 12 Out c/w Output Earth Bar Only 2
Year Warranty *Special Order! NCNR – Check Lead Time* This unit can be used as a cascade element
since it has 13 outputs to connect to other switches and increase the number
of users. This range of products has been designed with the ECO system: as
the number of users decreases, the power consumption of the system will
decrease as well. Gain in the FI band can be selected individually for each
group of 8 users to provide a balanced output. -
Read moreTELEVES Euroswitch 17x17x24 CASCADE 17 In 24 Out – 2 Year Warranty *Special
Order! NCNR – Check Lead Time* Compact
multiswitch equipped with 17 inputs (one terrestrial and 16 for four
satellites, each with its four polarities) and 24 user outputs. Thanks to its great compactness and its
optimized electronic design, it presents very low through and tap losses.
This allows to reduce the number of amplifiers needed in the cascade and to
obtain a better balanced signal in the users, even in large collective
installations. Can be used as a
terminal (star topology) or as a cascade by using a simple switch. In
addition, it incorporates a second switch that actives the TForce technology,
which automatically adjusts the terrestrial signal and keep it constant
despite variations in the reception. RED compliant Main Features: High shielding (A class) thanks to its
manufacture in Zamak Versatile: selector switch to shift between cascade and
terminal modes Low consumption under normal conditions. In addition, ECO mode
reduces consumption as the number of connected users decreases Wide 12-18V
power supply range, making it compatible with most existing systems Current
circulation between all inputs and cascades Input and output colour
identification -
Read moreTELEVES Euroswitch 9x9x24 CASCADE 9 In 24 Out c/w Output Earth Bar Only 2
Year Warranty *Special Order! NCNR – Check Lead Time* Compact multiswitch equipped with 9 inputs
(one terrestrial and 8 for two satellites, each with its four polarities) and
24 user outputs. Thanks to its great
compactness and its optimized electronic design, it presents very low through
and tap losses. This allows to reduce the number of amplifiers needed in the
cascade and to obtain a better balanced signal in the users, even in large
collective installations. Can be used
as a terminal (star topology) or as a cascade by using a simple switch. In
addition, it incorporates a second switch that actives the TForce technology,
which automatically adjusts the terrestrial signal and keep it constant
despite variations in the reception. RED compliant. Main Features: High shielding (A class) thanks to its
manufacture in Zamak Versatile: selector switch to shift between cascade and
terminal modes Low consumption under normal conditions. In addition, ECO mode
reduces consumption as the number of connected users decreases Wide 12-18V
power supply range, making it compatible with most existing systems Current
circulation between all inputs and cascades Input and output colour identification
Reviews
There are no reviews yet.