Upper section 1.25m turret series 180 SE RPR Televes
KSh24,956.00
Tower series 180 SE 1.25m built in stainless steel RPR. Maximum height is 7.5 m, including 3m mast. Televes 3014
This product is not sent to some countries or areas, if the cart does not have available carriers, you can contact us here
Upper section constructed in steel, to which a “zincado brillante + bichromate” base treatment is applied, they are used in two types of finishes (RPR or polyester paint). They currently allow installation at heights from 1 to 50.5 m.
Depending on the model, they implement threaded or plug-in fittings (SE finish) for their union.
The series 180SE, allows to cover the most basic needs of catchment with its recessed sections. The maximum height is 7.5 m, including 3m mast.
Installation types (Mod. 180 y 360)
Section by section
Fixing the lower section to the base in the proper vertical position, and then mounting the consecutive intermediate sections, which will be fixed with the corresponding guy-wire; the assembly is carried out by climbing the already placed sections and raising subsequently the section to be placed, using for it the adequate elevating tools.
The climbing has to be made with the appropiate safety conditions (safety-belt, anchoring, etc.); there won?t be more than two sections without shoring up. In case of coinciding two sections without guy-wire, auxiliary guy-wire will be used for the bracing of the sections during the set-up. The tower will be balanced adjusting the tension of the guy-wire and the using of proper balance-appliances.
Complete tower
First assembling the tower over the ground and raising it, once mounted, by means of a crane. This system can be used only with towers of heights lower than
18 meters in the model 180 and heights lower than 26 meters in the model 360.
Safety
If the installation of the tower is made on the roof, flat roof or other place of a building, the installer will take the necessary measures according to the indications of the architect responsible of the building, in order to know the mechanical resistance of these zones.
Specifications
Series 180 SE
Main steel pipes 20×1.5
Transversal stainless steel rods mm 6
Max. height with mast 3m m 7.5
Length m 1.25
Related products
-
Add to cartThis product is not sent to some countries or areas, if the cart does not have available carriers, you can contact us here
3m upper section, Zinc + Paint for the formation of a 180 series tower. ?max mast 46mm
The section is painted in white.
Characteristics
Anchoring system with union nuts
Easy and quick mounting
Fully automated soldering
180 tower maximum height: 26.5m (as per calculation conditions)
Zinc coating + colour paint: oven-lacquering with polyester electrostatic powder
Finished in white color
Specifications
Surface facing the wind 0.227 m2 x 1.2 coef. = 0.272 m2 -
Add to cart0,5 m peak-shaped upper section to finish the erection of a 450 XL series tower. The section is painted red (RAL 3020).
-
Surface plate, Hot-Dip Galvanizing 450XL and 550 towers…
KSh283,382.00Add to cartGround surface mount plate using pikes, no need for concrete. Used for bolting on it a pivoting base from 450XL or 550 range (ref. 313412 and 3142xx).
Features
The hot-dip galvanizing surface treatment provides enhanced durability in adverse corrosion conditions
Grey finish -
Intermediate Section reinforced Galvanized hot 3m Tower…
KSh281,446.00Add to cart3m middle section reinforced for the erection of a 450 XL series tower. Reinforced sections provide higher robustness, since the tubes have higher diameter and thickness; ideal for complex scenarios. Red.?Televes 313212
-
Anti-climb panels for 450XL towers 3 pcs Televes
KSh137,094.00Add to cartKit of 3 galvanized steel panels, for installation on each of the surfaces of a 450XL series tower. The panels are anchored with screws and improve the tower safety by preventing climbing and manipulation by unqualified personnel.
Reviews
There are no reviews yet.