Showing the single result

• 

  APC 10KVA , Smart-UPS SRT 10000VA 230V, SRT10KXLI – Kenya

  KSh990,000.00

  10KVA APC Smart-UPS SRT 10000VA 230V SRT10KXLI 

  10KVA APC Smart-UPS SRT 10000VA 230V SRT10KXLI Patent-pending operating mode that bypasses unused electrical components in good power conditions to achieve very high operating efficiency without sacrificing any protection.

   

  APC Smart-UPS SRT 10000VA UPS automatic internal bypass Supplies utility power to the connected loads in the event of a UPS power overload or fault. APC Smart-UPS SRT 10000VA UPS Plug and play external batteries Ensures clean, uninterrupted power to the loads when adding extra runtime to the UPS.

   

  APC Smart-UPS SRT 10000VA replaceable batteries Increases availability by allowing a trained user to perform upgrades and replacements of the batteries reducing Mean Time to Repair (MTTR)

  Manageability
  LED status indicators

  Quickly understand unit and power status with visual indicators.
  Serial connectivity

  Provides management of the UPS via a serial port.
  InfraStruXure Manager Compatible

  Enables centralized management via the APC InfraStruXure Manager.
  Network manageable

  Most models provide remote power management options of the UPS over the network. Many do not have NMC embedded.
  SmartSlot

  Customize UPS capabilities with management cards.
  Serviceability
  Audible alarms

  Provides notification of changing utility power and UPS power conditions
  Disconnected battery notification

  Warns when a battery is not available to provide backup power.
  Predictive failure notification.

  Provides early-warning fault analysis ensuring proactive component replacement.
  Automatic self-test

  Periodic battery self-test ensures early detection of a battery that needs to be replaced.
  User-replaceable batteries

  Increases availability by allowing a trained user to perform upgrades and replacements of the batteries reducing Mean Time to Repair (MTTR)
  Protection
  Cold-start capable

  Provides temporary battery power when the utility power is out.
  Generator compatible

  Ensures clean, uninterrupted power to protected equipment when generator power is used.
  Safety-agency approved

  Ensures the product has been tested and approved to work safely with the connected service provider equipment and within the specified environment.
  Resettable circuit breaker

  Easy recovery from overloads; no need to replace a fuse. (Not available on Wall Tap SKUs)
  Frequency and voltage regulation

  Gives higher application availability by correcting poor frequency and voltage conditions without using the battery.
  Power conditioning

  Protects connected loads from surges, spikes, lightning, and other power disturbances.
  Input power factor correction

  Minimizes installation costs by enabling the use of smaller generators and cabling.
  APC Smart-UPS SRT 10000VA UPS specifications
  Lead time
  Usually in Stock
   
  General
  provided equipment
  CD with software Documentation CD Installation guide Temperature probe USB cable Warranty card Web/SNMP management card
   
  Physical
  colour
  Black
   
  depth
  71.5 cm
   
  height
  43.2 cm
   
  net weight
  111.82 kg
   
  width
  26.3 cm
   
  Input
  network frequency
  40…70 Hz auto-sensing
   
  number of input connectors
  1 hard wire 3-wire (1P + N + E) 1 hard wire 5-wire (3P + N + E)
   
  input voltage limits
  100…275 V adjustable (half load) 173…476 V adjustable (half load) 160…275 V
   
  inputvolt_other
  220 V 240 V 380 V 415 V
   
  input voltage
  230 V 400 V 3 phases
   
  Output
  rated power in W
  10000 W
   
  Maximum configurable power in W
  10000 W
   
  harmonic distortion
  Less than 2 %
   
  output frequency
  50/60 Hz +/- 3 Hz sync to mains
   
  outputvolt_other
  220 V 240 V
   
  crest factor
  3 : 1
   
  UPS type
  Double conversion online
   
  Wave type
  Sine wave
   
  output connector type
  Hard wire 3-wire (H N + E) 1
   
  nb of power socket outlets
  6 IEC 60320 C13 3 IEC Jumpers 4 IEC 60320 C19
   
  bypass type
  Internal bypass (automatic and manual)
   
  output voltage
  230 V
   
  Conformance
  product certifications
  CE EAC IRAM RCM VDE
   
  standards
  EN/IEC 62040-1 EN/IEC 62040-2
   
  marking
  CE Mark
   
  Environmental
  ambient air temperature for operation
  0…40 °C
   
  relative humidity
  0…95 %
   
  operating altitude
  0…10000 ft
   
  ambient air temperature for storage
  -15…45 °C
   
  storage altitude
  0.00…15240.00 m
   
  acoustic level
  55 dBA
   
  heat dissipation
  1947 Btu/h
   
  IP degree of protection
  IP20
   
  Batteries & Runtime
  battery type
  Lead-acid battery
   
  number of battery filled slots
  0
   
  Battery recharge time
  1.5 h
   
  number of battery replacement quantity
  2
   
  liquid value
  0
   
  battery voltage
  +/- 192 V (split battery referenced to neutral)
   
  Communications & Management
  free slots
  1
   
  control panel
  Multifunction LCD status and control console
   
  alarm
  Audible and visible alarms prioritized by severity
   
  Emergency power off
  Yes
   
  Surge Protection and Filtering
  Surge energy rate
  480 J
   
  Packing Units
  Package 1 Weight
  126.82 kg
   
  Package 1 Height
  46.1 cm
   
  Package 1 width
  60 cm
   
  Package 1 Length
  100 cm
   
  Offer Sustainability
  EU RoHS Directive
  Compliant EU RoHS Declaration
   
  Mercury free
  Yes
   
  RoHS exemption information
  Yes
   
  WEEE
  The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins
   
  Optimized Energy Efficiency
  Energy efficient product

  Add to cart

  Quick View