Category: Rack / Cofre
Rack / Cofre
Showing 1–60 of 71 results
-
19 “Rack Panel Televes 24 F connectors
KSh4,238.00Add to cartThe frame (patch panel) has been designed for assembly with 24 “F” type connectors in RACK cabinets in the standard 19 “. This element is the final element of the structured fiber cabling system RTVSAT (75 Ohm coaxial cable).
-
19 “Rack Panel Televes 24 RJ45 Connectors
KSh4,238.00Add to cartThe frame (patch panel) has been designed for assembly with 24 Keystone RJ45 cat modules. 5e or kat.6 (UTP) in RACK cabinets in the standard 19 “. This element is the final element of the twisted pair of structured network cabling.
-
19? 5U high Subrack (PSU + 10 x T05/T12) Televes
KSh30,608.00Add to cartMechanical accessories that allow the installation of T05/T12?equipment on the wall and rack cabinets.
-
Add to cartDesigned to hold up to 24 female RJ45 connectors, it can be used as a junction point (data patch panel). Its use, allows to have a fixed data distribution network, to which we can replace the signal it has, with a simple reconnection on the panel.
-
Add to cartThe 6+2U rack Cabinet is used for the housing of active or passive equipment, visible from the outside and protected by a safe steel lockable structure. Compatible with optical fibre, data cables or coaxial cable installations, it allows the grouping of different technologies in a single cabinet.
-
Add to cartThe 8+2U rack Cabinet is used for the housing of active or passive equipment, visible from the outside and protected by a safe steel lockable structure. Compatible with optical fibre, data cables or coaxial cable installations, it allows the grouping of different technologies in a single cabinet.
-
19″ Rack Kit: 4 Wheels and Televes Screws
KSh9,804.00Add to cartKit made up of 4 wheels and 16 screws for assembly in a 19″ Rack, in a way that facilitates its movement. The wheels allow the rack to be moved easily, a very advantageous factor in large cabinets that can reach a very high weight. In addition, thanks to the wheels, you get more out of the work space, since it is possible to move the rack as needed.
-
7-in-1 combiner 19″ Rack installation Televes
KSh52,448.00Add to cartDevice that allows the combination of T.0X modules without Z output loop through, providing an optimal C/N for headends with high channel density. Features Equipped with a test output (-20 dB) High rejection among inputs The front panel eases connection Specifications ?Frequency range MHz 5 … 40 40 … 450 450 … 750 750 … …
-
Add to cartThe 13+2U rack Cabinet is used for the housing of active or passive equipment, visible from the outside and protected by a safe steel lockable structure. Compatible with optical fibre, data cables or coaxial cable installations, it allows the grouping of different technologies in a single cabinet.
-
Add to cart19″ Rack Cabinet of 13 units (+2 extra). Tempered glass door and accessible sides. Wall or floor installation.
-
Add to cartThe 15+2RU rack Cabinet is used for the housing of active or passive equipment, visible from the outside and protected by a safe steel lockable structure. Compatible with optical fiber, data cables or coaxial cable installations, it allows the grouping of different technologies in a single cabinet.
-
Add to cartThe 15+2RU rack Cabinet is used for the housing of active or passive equipment, visible from the outside and protected by a safe steel lockable structure. Compatible with optical fiber, data cables or coaxial cable installations, it allows the grouping of different technologies in a single cabinet.
-
Add to cart19″ Rack Cabinet of 6 units (+2 extra). Tempered glass door and accessible sides. Wall or floor installation.
-
Add to cart19″ Rack Cabinet of 8 units (+2 extra). Tempered glass door and accessible sides. Wall or floor installation.
-
Blank Panel for Rack 19? 1U Televes
KSh2,492.00Add to cartDesigned to fill 1 empty space in a 19″ rack, improving the air circulation and the rack appearance covering the free spaces between devices.?High strength and durability: made of steel, with a coating based on polyester resins and lead-free pigments.?Includes 4 screws and 4 nuts for installation.?Thickness: 3mm.?Black colour. Televes 533161
-
Blank Panel for Rack 19? 3U Televes
KSh5,808.00Add to cartDesigned to fill 3 empty spaces in a 19″ rack, improving the air circulation and the rack appearance covering the free spaces between devices.?High strength and durability: made of steel, with a coating based on polyester resins and lead-free pigments.?Includes 4 screws and 4 nuts for installation.?Thickness: 3mm.?Black colour. Televes 533163
-
Blank Panel for Rack 19″ 2U Televes
KSh3,592.00Add to cartDesigned to fill 2 empty spaces in a rack, improving the air circulation and the rack appearance covering the free spaces between devices. High strength and durability: made of steel. Black colour. Includes 4 screws and 4 nuts for installation in a 19″-rack. Thickness: 1.2mm
-
Cabinet with mounting plate 300x400x200mm Televes
KSh32,150.00Add to cartInterior cabinet with lock and key included that contains a perforated plate for the assembly of central or multiswitches inside. IP20 protection. 300 x 400 x 200mm. Televes 5893
-
Add to cartIt allows you to efficiently organize the wiring of the rack, thus improving access to it and its appearance.
-
Add to cartCable Management for Rack. 1RU, for Rack 19″. 1 Hole with Brush Strip. It allows us to organize efficiently the rack wiring, thereby improving the access to it and its appearance.
-
Add to cartCable Management for Rack. 1RU, for Rack 19″. 5 Rings. It allows us to organize efficiently the rack wiring, thereby improving the access to it and its appearance.
-
Add to cartCoffer with lock and forced ventilation 327mm.?Capacity for 1 power supply and 4 T.0X modules.?Wall mounting using screw-mounting back plate.?DIN rails for module installation.?Televes 507204
-
Add to cartCoffer with lock and forced ventilation 498mm.?Capacity for 1 power supply and 7 T.0X modules.?Wall mounting using screw-mounting back plate.?DIN rails for module installation.?Televes 507203
-
Add to cartDesigned to occupy 1U, it contains up to 24 RJ45 Cat 6A female connectors with FTP shielding for data transmission under the Gigabit Ethernet standard. Its use allows to have a fixed data distribution network, to which we can replace the signal it has, with a simple reconnection on the panel.
-
Add to cartDesigned to occupy 1U, it contains up to 24 female RJ45 Cat 6 UTP connectors for data transmission under the Gigabit Ethernet standard. Its use allows to have a fixed data distribution network, to which we can replace the signal it has, with a simple reconnection on the panel.
-
DIN Rail Panel for Rack 19″ 3U, 24 Poles Televes
KSh18,694.00Add to cartDesigned for the installation of DIN rail compatible devices. It provides a common location for all peripherals that have this standardized fixing system, thus facilitating the organization in the rack.
-
Add to cartDesigned to house SC to SC or LC to LC adapters, thus allowing it to become a junction point between optical fibers (FO patch panel). It can be used to easily connect segregated multifiber hoses or multiple fiber hoses, thus allowing easy access and identification of these.
-
Add to cartDesigned to house up to 3 LGX modules, it can be used as a junction point for optical fibers (FO patch panel). It can be used to easily connect segregated multifiber hoses or several fiber hoses, thus allowing easy access and identification of these.
-
Headend cabinet 440x440x140mm Televes
KSh31,506.00 -
Add to cartVentilation unit that is installed on the roof of a rack cabinet to force the cooling of the structure. This creates an air current inside the cabinet, facilitating the dissipation of heat from the electronic components installed inside and maintaining a suitable temperature range.
-
Lockable cabinet 498mm (10M+PSU) Televes
KSh29,148.00Add to cartMechanical accessories that allow the installation of T12/T05?equipment on the wall and rack cabinets.
-
Lockable cabinet 648mm (14M+PSU) Televes
KSh41,028.00 -
Add to cartMain panel open for data / coaxial cables. For a maximum of 24 female RJ45 connectors. Televes 546610
-
Mounting panel for Rack 19″ 4U (Depth 62 mm) Televes
KSh27,418.00Add to cartDesigned for easy installation on it of amplification equipment that does not have a rackable structure: DTKom, MicroKom, Avant X, Avant 6, FiberKom or CoaxData (except ref. televes-769301).
-
Mounting plate 300×400, 19mm Televes
KSh6,440.00Add to cartMetal plates that allow a simple assembly of multiswitches, amplifiers and grounding components. Dimensions: 300x400mm. The plates have a spacer of approximately 2cm (19mm) to get enough distance from the wall and thus be able to screw the components easily with 3mm sheet metal screws. Televes 5894
-
Add to cartDesigned to house the equipment separating the user’s network from the community’s. Specified to meet the ICT2 requirements and designed to be placed in the NTE, it works as a enclosure that houses the different technologies; can be manipulated by the user.?Televes 546701
-
Network Termination Registration for…
KSh19,764.00Add to cartDesigned to house the equipment separating the user’s network from the community’s. Specified to meet the ICT2 requirements and designed to be placed in the NTE, it works as a enclosure that houses the different technologies; can be manipulated by the user.
-
Outdoor Case Black Mini Series Televes
KSh1,370.00Add to cartOutdoor protective case, for outdoor installation of mini-series distribution devices (Splitters and taps). Easy to install, thanks to the compact size and ergonomic design. Features Interior dimensions: 57 mm x 47 mm x 13 mm Built in black ABS plastic Sliding opening system Wall and mast mounting (flange provided)
-
Perforated wall plate 400x400x19mm Televes
KSh8,688.00Add to cartAllows the installation of active or passive equipment, leaving these accessible. It facilitates the installation of the product and improves the final image of the assembly. The installer can direct the output or input cables, in any direction. Televes 589401
-
Perforated wall plate 400x600x19mm Televes
KSh13,828.00Add to cartAllows the installation of active or passive equipment, leaving these accessible. It facilitates the installation of the product and improves the final image of the assembly. The installer can direct the output or input cables, in any direction. Televes 589402
-
Add to cartStrip of 8 Schuko-type 16A sockets, to provide power supply to equipment installed in 19″ rack racks. It occupies 1U of height and incorporates a light switch with protection cover.
-
Rack 19″ rack for 18 units. 600x942x600mm. Floor…
KSh142,628.00Add to cartThe 18U rack is used to introduce passive or active equipment inside, allowing it to be visible and protected under a secure structure (steel) and under lock and key. Compatible with fiber optic, data cable, or coaxial cable installations, it allows the different technologies to be grouped in the same cabinet. Designed for ground installation. Supplied assembled.
-
Rack 19″ rack for 22 units. 600x1120x600mm. Floor…
KSh172,036.00Add to cartThe 22U rack is used to introduce passive or active equipment inside, allowing it to be visible and protected under a secure (steel) and locked structure. Compatible with fiber optic, data cable, or coaxial cable installations, it allows the different technologies to be grouped in the same cabinet. Designed for ground installation. Supplied assembled.
-
Rack 19″ rack for 27 units. 600x1342x600mm. Floor…
KSh196,916.00Add to cartThe 27U rack is used to introduce passive or active equipment inside, allowing it to be visible and protected under a secure structure (steel) and under lock and key. Compatible with fiber optic, data cable, or coaxial cable installations, it allows the different technologies to be grouped in the same cabinet. Designed for ground installation. Supplied assembled.
-
Rack 19″ rack for 32 units. 600x1564x600mm. Floor…
KSh211,872.00Add to cartThe 32U rack is used to introduce passive or active equipment inside, allowing it to be visible and protected under a secure (steel) and locked structure. Compatible with fiber optic, data cable, or coaxial cable installations, it allows the different technologies to be grouped in the same cabinet. Designed for ground installation. Supplied assembled.
-
Add to cart8RU high chassis for wall or perforated plate mounting. It has been designed to house panels and boards, mainly for the organization of connectors.
-
Add to cartThe 37U rack is used to introduce passive or active equipment inside, allowing it to be visible and protected under a secure (steel) and locked structure. Compatible with fiber optic, data cable, or coaxial cable installations, it allows the different technologies to be grouped in the same cabinet. Designed for ground installation. Supplied assembled.
-
Add to cartThe 37U rack is used to introduce passive or active equipment inside, allowing it to be visible and protected under a secure (steel) and locked structure. Compatible with fiber optic, data cable, or coaxial cable installations, it allows the different technologies to be grouped in the same cabinet. It is ideal for installation of headends such as GPON. Supplied assembled.
-
Add to cartThe 42U rack is used to introduce passive or active equipment inside, allowing it to be visible and protected under a secure (steel) and locked structure. Compatible with fiber optic, data cable, or coaxial cable installations, it allows the different technologies to be grouped in the same cabinet. It is ideal for installation of headends such as GPON. Supplied assembled.
-
Add to cartDesigned to house SC Duplex or LC Quad adapters, thus allowing it to become a connection point between optical fibers (FO patch panel). Its use allows you to have a fixed fiber optic distribution network, to which you can supply different signals by means of a simple reconnection.
-
Rack Tray 19″ 2U (Depth 315mm) Televes
KSh8,826.00Add to cartDesigned for easy installation on it of equipment that does not have a rackable structure (routers, keyboards, PCs…). It has a series of perforations to favor the ventilation of the devices that are on it, as well as to be able to hold these by means of velcro tapes or flanges.
-
Rack Tray 19″ Televes 1 unit with 24 SC connectors
KSh18,902.00Add to cartThe frame (patch panel) has been designed for mounting with 24 individual SC / APC type connectors in RACK cabinets in the standard 19 “. This element is the final element of the structured fiber optic cabling system.
-
Add to cartRubber plug sized to fit SC Simplex and LC Duplex holes. These covers prevent the entry of dust or other elements into the unused connections of panels and trays, to avoid operating problems and extend the useful life of the rack elements.
-
Add to cartScrew Kit for Rack 19?: Screw with washer and nut (50 units) Kit consisting of screw, washer and nut for the devices and rack accessories installation. Features Galvanised screw Black washer Caged nut M6 with slots of 8.5mm and thickness 2.5mm.
-
Secondary Register (RS) for Data/Coaxial/Fiber…
KSh25,894.00Add to cartDesigned mainly for use in ICT networks, its purpose is to house the elements that separate the distribution network from the dispersion network, acting as a point of union between both networks. Its usual point of installation is located on the party walls of each floor, although it can be used as a passage register in any type of installation.
-
Add to cart8RU high chassis for wall or perforated plate mounting. It has been designed to house panels and boards, mainly for the organization of connectors.
-
Side door lock for 19″ Rack, with 2 keys Televes
KSh1,246.00Add to cartThey reinforce the security of the Rack and are very useful in installations in public buildings or crowded places where it is difficult to maintain control over the flow of people near the installation.
-
Add to cartDesigned to the easy installation of equipament that do not have a enrackable structure (routers, keyboards, pcs..). It has perforations in its base to facilitate the ventilation of the devices that are on it, as well as to be able to attach them by means of Velcro straps or cable ties.
-
Sliding tray for Rack 19″ 1U (adjustable depth of…
KSh16,202.00Add to cartDesigned to the easy installation of equipament that do not have a enrackable structure (routers, keyboards, pcs..). It has perforations in its base to facilitate the ventilation of the devices that are on it, as well as to be able to attach them by means of Velcro straps or cable ties.
-
Add to cartT.0X -panel for Rack 1U with a capacity of up to 2×7 “F” adapters. Designed to house up to 2×7 female “F” coaxial adapter units – “F” female (ref. 417302), it can be used as a junction point (coaxial patch panel). It allows to have a fixed distribution network, to which different signals can be …
T0X -panel for Rack 1U with a capacity of up to 2×7 F…Read More
Popular Products
-
Starlink Mini Dual USB Car Charger with
DC Cable & Voltmeter - 9.84FT/3M
-
Starlink Mini Versatile 3-in-1 DC Power
Cable Replacement - 9.8FT/16.4FT/32.8FT
-
Starlink Gen2 Rectangular Satellite V2
Replacement Extension Cable - 32.8FT/75FT/150FT/300FT
-
Starlink Flat High Performance Ethernet
Adapter - SPX Plug to RJ45 Cable Extension
-
DC 9V to 28V Boost Converter with DC
Power Cable for Starlink Mini
Products
-
Starlink Mini Dual USB Car Charger with
DC Cable & Voltmeter - 9.84FT/3M
-
Starlink Mini Versatile 3-in-1 DC Power
Cable Replacement - 9.8FT/16.4FT/32.8FT
-
Starlink Gen2 Rectangular Satellite V2
Replacement Extension Cable - 32.8FT/75FT/150FT/300FT
-
Starlink Flat High Performance Ethernet
Adapter - SPX Plug to RJ45 Cable Extension
-
DC 9V to 28V Boost Converter with DC
Power Cable for Starlink Mini