Alcad CA-371 K2 ampli, uhf-vhf, 2 outputs, lte700
KSh24,318.00
Alcad CA-371 – Serie 904: K2 ampli, uhf-vhf, 2 outputs, lte700.
Head-end broadband amplifier with three inputs and two outputs. It has two UHF inputs with LTE700 rejection filters and another input for BI/FM/BIII/DAB. The two outputs have the same output level, with a maximum of 110 dB?V, and facilitate the creation of star-shaped distributions using splitters.
UHF1 input can power 24V preamplifiers with up to 60 mA. The installer can easilly switch the preamplifier power on and off.
The amplifier is powered with an external power supply, included with the product. It is also sold sepparately as FF-300 as a spare part, to be used for maintainance or repairs.
Its zamak chassis provides the amplifier with maximum shielding, while also making it very robust. The F-type connections also allow for minimum load mismatch and maximum shielding.
Downloads
Technical specification
Technical specification
Manuals
CA-371 Manual pdf 3.15 MB
Catalogues
CATALOGUE_ALCAD_EN_MULTIMEDIA_TV pdf 5.42 MB
Certificates
CE Declaration – CA-371 pdf 65.02 KB
Flyers
K2 broadband amplifiers pdf 3.14 MB
Technical specifications
Related products
-
Alcad CMO-703 Ipal flush box for pdk-20003
KSh2,832.00Add to cartAlcad CMO-703 – Serie 974: Ipal flush box for pdk-20003.
To embed an entrance panel to the wall, it is necessary to previously place a flush-mount box where we will later fix the plate. This box is made of aluminum. It has some plates that allow to hold the entrance panel during installation, thus facilitating the work of connection and start-up of the different elements of the system.
Downloads
Technical specification
Technical specification
Catalogues
CATALOGUE_ALCAD_EN_DES pdf 5.85 MB
-
Add to cartHigh gain mast amplifier (LTE700, 2nd Digital Dividend). 4 inputs: FM-BIII/DAB-UHF-UHF. Mast-mounted amplifier to amplify terrestrial television signals from various antennas. It consists of 4 inputs with amplification in all bands. The amplifier is powered at 24Vdc through the output coaxial cable.
-
Add to cartModular amplifier allowing the adjustment of individual UHF channels (DTT), with very high rejection of adjacent channels (>50 dB). 470-862MHz G55dB Vs125dB?V.?Perfect format for headend mounting, with additional T12-series amplifiers.?Televes 509812
-
Add to cartDomestic amplifier with 6 outputs, to extend the terrestrial television domestic network.
Equipped with LTE700 4G/5G filtering.
Highlights
Low-impact visual design and limited size
Integrated high-performance switched-mode power supply (40% less than a standard amplifier )
Fully automated manufacturing subject to the most stringent quality controls
Features
Manual gain control, protected by a folding cover
Can be wall-mounted using screws
?F? connectors
Specifications
VHF/UHF
Frequency band MHz 47-68/174-400 470-694
Inputs 6 (F) 6 (F)
Gain G dB 6 14
Gain regulation margin marg – AUTO
Output level (Vout) DIN 45004B? dB?V 104 102
IMD3(2tones, -35dB) 97 95
10CH DVB-T – 83
Noise figure N.F. dB – 0 … 12 -
Add to cartModule that amplifies the optical signal of 1550nm, generating an output power of 19dBm. Equipped with WDM, it has 1 input of 1310/1490nm with which it multiplexes the 1550nm amplified signal, offering 1 output 1310/1490/1550nm, for use in a GPON header (usually with an OLT512). Televes 234221
Reviews
There are no reviews yet.