Alcad ZG-211 Bii(fm) broadband amplifier, 53 db
KSh13,188.00
Alcad ZG-211 – Serie 905: Bii(fm) broadband amplifier, g=53 db.
Analogue FM and DAB radio broadband amplifier which amplifies the entire FM or DAB radio band. Amplifies the whole FM or DAB radio band. High gain and output level. The ZG-611 amplifier amplifies the DAB digital radio by groups of channels (which should be specified when ordering). The FM amplifier is also available for OIRT frequencies (when ordering model ZG-611, please specify FM OIRT if required).
Applications
MATV installations that include FM or DAB radio distribution.
Characteristics
This module is compatible with other equipment for TV in the 905- ZG range. It allows distribution of FM and DAB radio and of television signals to be combined using a single piece of equipment. Attenuator by means of active MOSMIC regulator to reduce the noise figure. 30dB multiturn attenuator. Switch to supply power to preamplifiers with protection against short circuits.
Downloads
Technical specification
Technical specification
Manuals
– pdf 201.67 KB
Catalogues
CATALOGUE_ALCAD_EN_MULTIMEDIA_TV pdf 5.42 MB
Certificates
CE Declaration – ZG-211 pdf 68.66 KB
Technical specifications
Related products
-
Add to cartHigh gain mast amplifier (LTE700, 2nd Digital Dividend). 3 inputs: FM-BIII/DAB-UHF. Mast-mounted amplifier to amplify terrestrial television signals from various antennas. It consists of 3 inputs with amplification in all bands. The amplifier is powered at 24Vdc through the output coaxial cable.
-
-
Alcad FA-512 Power supply 96 w (90-260 vac) himalaya
KSh81,896.00Add to cartAlcad FA-512 – Serie 912: Power supply 96 w (90-260 vac) himalaya.
Switching power supply for 912-TM himalaya transmodulateurs, which permits the installation of a PA-740 broadband amplifier and different modules on the support frame. An additional power supply can be added to the headend so that it will have a redundant power supply with load balance. Power supply with a flat cable of 10 lines at 12V.
Downloads
Technical specification
Technical specification
Manuals
FA-512 Manual pdf 2.11 MB
Catalogues
CATALOGUE_ALCAD_EN_MULTIMEDIA_TV pdf 5.42 MB
Certificates
CE Declaration – FA-512 pdf 61.42 KB
Technical specifications
-
Alcad SP-245 Frame d47 for 2 psu and 8 modules
KSh5,870.00Add to cartAlcad SP-245 – Serie 912: Frame d47 for 2 psu and 8 modules.
Support frame for 912-series headends with redundant power supplies. It can hold up to 2 power supplies, one amplifier and 7 modules, or 2 power supplies and 8 modules. There is a 47 mm distance between modules to allow for better heat disipation.
Downloads
Technical specification
Technical specification
Catalogues
CATALOGUE_ALCAD_EN_MULTIMEDIA_TV pdf 5.42 MB
-
Add to cartModule that amplifies the optical signal of 1550nm, generating an output power of 19dBm. Equipped with WDM, it has 1 input of 1310/1490nm with which it multiplexes the 1550nm amplified signal, offering 1 output 1310/1490/1550nm, for use in a GPON header (usually with an OLT512). Televes 234221
Reviews
There are no reviews yet.