Category: Tools
Tools
Showing all 56 results
-
16PON board for modular system OLT3072 Televes
KSh2,886,334.00Add to cart16PON board for OLT3072 modular system.?The Optical Line Termination (OLT) is a headend that distributes IP services over optical fiber using the GPON protocol. It is in charge of managing and adapting the services to the subscribers’ profiles and their devices, allowing the distribution and commercialization of Quad Play signals (Internet, TV, telephony, etc).?Televes 769422
-
2×10 Gbps Back plane switch for modular system OLT3072 Televes
KSh1,872,354.00Add to cart2×10 Gbps Back plane switch for OLT3072 modular system.?The Optical Line Termination (OLT) is a headend that distributes IP services over optical fiber using the GPON protocol. It is in charge of managing and adapting the services to the subscribers’ profiles and their devices, allowing the distribution and commercialization of Quad Play signals (Internet, TV, telephony, etc).?Televes 769421
-
Add to cartTool used to crimp and cut excess cable from pass-through and non-pass through RJ45 male connectors in a single action.
-
CATV optical transmitter with CAG without C.R 1550nm Po…
KSh584,672.00Add to cartProduces an optical signal in the 1550 nm-window modulated by the RF input signal (47 MHz – 1100 MHz). The optical output power is 10 dBm.? Equipped with automatic gain control (AGC).? Furthermore, it is stable in terms of temperature, thanks to the laser temperature control circuit.? Perfect for RFoG solutions, and as RF Overlay …
CATV optical transmitter with CAG without C.R 1550nm Po…Read More
-
Add to cartProduces an optical signal in the 1310 nm-window modulated by the input RF CATV signal (47 MHz – 1100 MHz). The optical output power is 10 dBm.? Equipped with automatic gain control (AGC).? Stable in terms of temperature, thanks to the laser temperature control circuit.? Perfect for RFoG / RF Overlay solutions. Highlights MATV-compatible: up …
CATV optical transmitter with CAG without C.Retorno 1310nm…Read More
-
Chassis with power supply for modular system OLT3072 Televes
KSh1,170,312.00Add to cartChassis with power supply for OLT3072 modular system.?The Optical Line Termination (OLT) is a headend that distributes IP services over optical fiber using the GPON protocol. It is in charge of managing and adapting the services to the subscribers’ profiles and their devices, allowing the distribution and commercialization of Quad Play signals (Internet, TV, telephony, etc).?Televes 769420
-
Cleaning tape for fibre connectors Televes
KSh15,842.00Add to cartCleaning tape for fiber connectors. It allows to clean connectors and guarantee that they are not affected by dirt, mainly dust. Televes 232910
-
Cleaver of Fibre Optics Televes
KSh61,192.00Add to cartEquipped with high quality and precision components, this cleaver provides a perfect cut (90?), which usually generates a perfect fusion (0,01dB). The work process is facilitated by the assisted opening of the cutter. In addition, it includes a blade slider per magnet, which prevents premature tool wear.
-
-
Read moreThe DSX-602PRO is an indispensable certification tool for the analysis of twisted pair networks. Ranging from Cat 3 / Class C to Cat 6A / Class E, it offers speed and reliability to make your work more efficient and productive.
-
Dual Power Supply -48Vdc for OLT Rack 19″ 1U Televes
KSh480,128.00Add to cartHot-swappable double power supply for OLT feeding. Subscriber service is not interrupted. -48 VDC per module.?19″-rack installation, 1U height, for GPON headends.?OLT connection cables provided. Televes 769601
-
-
Add to cartOptical mini-receiver for small MDU (Multi Dwelling Unit); receives one optical signal in the 1200 nm-1600 nm range and restores it on one RF output (47 MHz-1006 MHz) with amplification. Equipped with OLC technology. Perfect for RF Overlay, FTTB, and FTTH applications.?Local powering
-
Add to cartOptical mini-receiver for small MDU (Multi Dwelling Unit); receives one optical signal in the 1200 nm-1600 nm range and restores it on one RF output (47 MHz-1006 MHz) with amplification.?Equipped with OLC technology.?Perfect for RF Overlay, FTTB, and FTTH applications.?Remote powering (F connector). Televes 238101
-
Add to cartFiber optic organizer designed to accommodate cables in the main register. The fiber is wound inside in an orderly way and without pinching, it is ideal to avoid the risk of micro and macro bends that can occur during cable handling.
-
IF simulator (950-2150MHz) Televes
KSh72,736.00Add to cartDesigned for mitigation and flatness testing in BIS installations;Rotary switch that selects the various modes of operation,Generates a scan between 950 and 2150 MHz, thus covering all the Satellite Intermediate Band.
-
Add to cartTool equipped with a grip and an F-type female thread to screw the F connectors on, and ease their insertion into the compression tool. Televes 216310
-
Add to cartProfessional fusion splicer equipped with six alignment engines to work on the different axes, capable of performing an optical fibre fusion in 9 seconds. Furthermore, fusion is automatically started with the cover closure. It also allows the fusion of pre-configured connectors, thus connectorizing the fibre.
-
Add to cartKit consisting of LNB Wideband that captures the entire frequency spectrum of a satellite and transmits it through two outputs (V-H) in a frequency range between 290 and 2340MHz. The optical transmitter receives the signal from the LNB in its two satellite inputs, in addition to including a third input for terrestrial signal (88-694MHz) mixing.
-
Add to cartKit consisting of LNB WideBand that captures the entire frequency spectrum of a satellite and transmits it through two outputs (V-H) in a frequency range between 290 and 2340MHz. The optical transmitter receives the signal from the LNB in its two satellite inputs, in addition to including a third input for terrestrial signal (88-694MHz) mixing.
-
Mechanical fiber optic splicer Televes
KSh25,470.00 -
Add to cartThe Optical Network Terminal (ONT) is a customer premises equipment (CPE) in charge of delivering the services at the subscriber’s home. The Home type provides 4 GbE Ethernet ports, 2 FXS ports, 1 USB port, Wi-Fi WLAN 802.11 b/g/n/ac, 2.4 / 5 GHz), and RF Overlay.
-
ONU BASIC (1xGbE) Televes
KSh38,998.00Add to cartThe Optical Network Terminal or ONT is the device in charge of delivering the operator services subscribed by the user. The terminal range conforms to installation and implemented services criteria; Televes has up to 4 ONT ranges of products (Basic, Standard, Office and Home).
-
Optical amplifier YEDFA 32 outputs 20dBm + WDM Televes
KSh3,118,412.00Add to cartThis device consists of: an amplifier and a WDM. Designed to mix the RF Overlay service with GPON. High output optical power amplifier of 20dBm. Includes WDM for RF Overlay multiplexing with GPON signals. Input range from -10 to +10dBm. Application to include RF Overlay in GPON headers. Indicated to cover great distances. SC/APC connectors. Televes 769611
-
Add to cartAre optical receivers that deliver the original RF signal that has previously been converted by a fiber optic transmitter. Ref. 2336 and 233601 features return path optical transmitter.?Multi-window input (1200 ???1600 nm). Wide input dynamic range (-10 to 6 dBm).
-
Optical Receiver Module Quad Overlight ?SC/APC?…
KSh83,902.00Add to cartOptimized electronic and optical engineering, at the service of TV. This Wideband and terrestrial satellite optical receiver is responsible for capturing an optical TV signal (1100…1650nm), processing it and recovering the original terrestrial and satellite TV signals, offering 4 outputs in Quad mode: each connector provides the four polarities and bands.
-
Optical Receiver Module Quattro Overlight ?SC/APC?…
KSh87,608.00Add to cartOptimized electronic and optical engineering, at the service of TV. This Wideband and terrestrial satellite optical receiver is responsible for capturing an optical TV signal (1100…1650nm), processing it and recovering the original terrestrial and satellite TV signals, offering 4 outputs in Quattro mode: each connector provides a of the four TVSAT combinations of polarity and band.
-
Optical Splitter 1310…1550nm SC/APC 2D 4dB Televes
KSh44,126.00Add to cartPassive optical splitters: 2 outputs, to be used in optical fibre star networks.?Optical Splitter 1310/1550nm SC/APC 2D 4dB Televes 2337
-
Add to cartProduces an optical signal in the 1550 nm-window modulated by the input RF SMATV signal (47 MHz- 2400 MHz). The optical output power is 5 dBm.
Perfect for RFoG solutions, and as RF Overlay transmitter on GPON networks. -
Add to cartThis device transforms the downstream optical signal into a radio-frequency signal; furthermore, it transforms the radio-frequency? signal produced by the cable-modem and/or the? user’s STB (return channel) into an upstream optical signal.
-
Add to cartCWDM WideBand satellite and terrestrial optical transmitter specifically designed for indoor installation. Intended for two-satellite transmission to more than 64 users, this device receives a satellite signal from an RF Wideband LNB and terrestrial band, and distributes it over a fiber output in the 1570nm window with 9dBm optical power.
-
Add to cartCWDM WideBand satellite and terrestrial optical transmitter specifically designed for indoor installation. This device receives a satellite signal from a RF Wideband LNB and terrestrial band, and distributes it up to 64 users over a fiber output in the 1550nm window with 9dBm optical power.
-
Add to cartCWDM WideBand satellite and terrestrial optical transmitter specifically designed for indoor installation. This device receives a satellite signal from a RF Wideband LNB and terrestrial band, and distributes it up to 64 users over a fiber output in the 1310nm window with 10dBm optical power.
-
Add to cartCWDM WideBand satellite and terrestrial optical transmitter specifically designed for its outdoors installation, at a minimum distance from the LNB. Intended for two-satellite transmission to more than 64 users, this device receives a satellite signal from an RF Wideband LNB and terrestrial band, and distributes it over a fiber output in the 1570nm window with 9dBm optical power.
-
Add to cartCWDM WideBand satellite and terrestrial optical transmitter specifically designed for outdoor installation, at a minimum distance from the LNB. This device receives a satellite signal from an RF Wideband LNB and terrestrial band, and distributes it up to 64 users over a fiber output in the 1550nm window with 9dBm optical power.
-
Add to cartCWDM WideBand satellite and terrestrial optical transmitter specifically designed for outdoor installation, at a minimum distance from the LNB. This device receives a satellite signal from an RF Wideband LNB and terrestrial band, and distributes it up to 64 users over a fiber output in the 1310nm window with 10dBm optical power.
-
Peeler for multifiber cables Televes
KSh25,218.00 -
Precision peeler for fiber optics Televes
KSh6,606.00 -
Add to cartProfessional cable assembly tool specifically designed to reduce labor times. This is achieved through an automated process of inserting the different pairs (once located), to which is added the cutting of the residual cable, thus generating a high-quality connection.
-
Promax RP-050 IF and UHF signal generator
KSh76,230.00Add to cartThe RP-050 satellite IF and UHF simulator is a radio frequency pilot generator that allows to test the frequency response of an entire television system prior to having the antennas or the Headend installed. It can be used for the test and certification of TV and satellite wiring, headend trouble shooting and many other.
Specs
SPECIFICATIONS RP-050
L BAND TEST PILOTS 1050 / 1575 / 2100 MHz
UHF TEST PILOT 537.5 MHz
LEVEL LOW MODE: 90 dBmV ? 4 dB
HIGH MODE: 105 dBmV ? 4 dB
SIGNAL DETECTION 22 kHz
SUPPLIED VOLTAGE DET. 13 / 18 V in to coaxial cableMore information here
-
Add to cartProduces an optical signal in the 1550nm-window modulated by the input RF SMATV signal (54 MHz- 2150 MHz). The optical output power is 4dBm.?Perfect for RFoG / RF Overlay solutions. Televes 234305
-
Add to cartProduces an optical signal in the 1310 nm-window modulated by the input RF SMATV signal (47 MHz- 2400 MHz). The optical output power is 10 dBm.
Perfect for RFoG / RF Overlay solutions. -
Add to cartProduces an optical signal in the 1310 nm-window modulated by the input RF SMATV signal (47 MHz- 2400 MHz). The optical output power is 6 dBm.
Perfect for RFoG / RF Overlay solutions. -
Straight “F” Compression Connector Tool Televes
KSh18,360.00 -
Add to cartPassive device that multiplexes/demultiplexes two optical inputs: 1310 nm/1490 nm (GPON), and 1550 nm (RF overlay). For application on G/EPON networks.?The T.0X format frame allows rack installation for optical fibre headends. Televes 234701
-
T.0X (WDM) optical multiplexer 1610 – 1550nm Televes
KSh88,066.00Add to cartPassive device that multiplexes/demultiplexes two optical inputs: 1610 nm (GPON), and 1550 nm (Downlink). For application in RFoG systems.?The T.0X format frame allows rack installation for optical fibre headends. Televes 234702
-
T.0X Amplifier/Optical Multiplexer 1550nm 8S “SC/APC” 20dBm…
KSh3,156,890.00Add to cartThe module amplifies the 1550 nm optical signal producing an output power of 20 dBm. Equipped with WDM, it provides 8 1310 nm/1490 nm-inputs that multiplex the amplified 1550 nm-signal, providing 8 1310 nm/1490 nm/1550 nm-outputs to be used in a GPON headend (usually OLT512).??Televes 234228
-
Add to cartThe module amplifies the 1550 nm optical signal producing an optical output power of 20 dBm. Based on EDFA (erbium doped fibre) technology, it provides a high gain and a low noise factor.
-
T.0X Optical Transmitter SMATV 1310nm “SC/APC” Po 6dBm…
KSh294,514.00Add to cartProduces an optical signal in the 1310 nm-window modulated by the input RF SMATV signal (47 MHz- 2200 MHz). The optical output power is 6 dBm.? Perfect for RFoG / RF Overlay solutions. Highlights SMATV-compatible: up to 2200 MHz input bandwidth RF input level control: optimization of the optical conversion quality parameters Optical power drop …
T.0X Optical Transmitter SMATV 1310nm “SC/APC” Po 6dBm…Read More
-
T.0X Optical Transmitter SMATV 1310nm “SC/APC” Po 6dBm…
KSh360,580.00Add to cartProduces an optical signal in the 1310 nm-window modulated by the input RF SMATV signal (54 MHz- 2150 MHz). The optical output power is 10 dBm.?Perfect for RFoG / RF Overlay solutions. Televes 233311
-
Televes FIBERKOM Optical fiber transmitter TX.FO 1310nm…
KSh115,724.00Add to cartOptical fiber transmitter, which generates an optical output signal of 1310nm of wavelenght with an RF input. It is possible to obtain an optimal output signal working with low input levels (79 & 95 dB?V / 19 & 35 dBmV). The FiberKom design, which is made of Zamak, provide great robustness and shielding. This desing offers a wall assembly for separately installation also.
-
Add to cartRJ45 female connector assembly tool specifically designed to reduce work times, especially when it is undertaken an installation with high number of connectors. The tool allows to automate the process of inserting the different pairs and the cutting of the residual cable section, thus giving a high quality finished connection.
-
Add to cartThe FTTH transmitter receives one RF terrestrial signal (DTT from one headend) and one optical satellite signal (1310 nm) as inputs. The device converts DTT into optical (1550 nm) and multiplexes it with the satellite input to provide one single optical fiber output (1310 nm/1550 nm) with all the contents.?Part of FULL SAT+DTT system, to be used together with the FTTH receiver televes-237320.
-
Add to cartThe FTTH transmitter receives one RF terrestrial signal (DTT from one headend) and one optical signal (1310 nm from an optical LNB) as inputs. The device converts DTT into optical (1550 nm) and multiplexes it with the satellite input to provide one single optical fibre output (1310 nm/1550 nm).?Part of FULL SAT+DTT system, to be used together with the FTTH receiver televes-237320. Televes 237301
-
WDM Module GPON+RF(1310/1490nm)-(1550nm) Televes
KSh17,190.00Add to cartThis module allows multiplexing/demultiplexing of the different wavelengths: (Data 1310/1490nm & RF Overlay 1550nm), so its main function is to separate the lambdas before the ONT/ONU (Optical Network Terminal/Unit).?It also allows to mix the Data signal and the RF Overlay signal and deliver the two lambdas through a single fibre.
-
Wind mounting kit ?45mm Televes
KSh10,312.00Add to cartWind mounting kit for masts. Ideal for when you need to mount masts with 5 meters or more. Maximum tube diameter 45mm. Televes 4361
Popular Products
-
Starlink Mini Dual USB Car Charger with
DC Cable & Voltmeter - 9.84FT/3M
-
Starlink Mini Versatile 3-in-1 DC Power
Cable Replacement - 9.8FT/16.4FT/32.8FT
-
Starlink Gen2 Rectangular Satellite V2
Replacement Extension Cable - 32.8FT/75FT/150FT/300FT
-
Starlink Flat High Performance Ethernet
Adapter - SPX Plug to RJ45 Cable Extension
-
DC 9V to 28V Boost Converter with DC
Power Cable for Starlink Mini
Products
-
Starlink Mini Dual USB Car Charger with
DC Cable & Voltmeter - 9.84FT/3M
-
Starlink Mini Versatile 3-in-1 DC Power
Cable Replacement - 9.8FT/16.4FT/32.8FT
-
Starlink Gen2 Rectangular Satellite V2
Replacement Extension Cable - 32.8FT/75FT/150FT/300FT
-
Starlink Flat High Performance Ethernet
Adapter - SPX Plug to RJ45 Cable Extension
-
DC 9V to 28V Boost Converter with DC
Power Cable for Starlink Mini