Antenna Triax BII – FM Omni
KSh3,690.00
Omni-directional BII-FM Antenna, Gain -2 dB
Band? BII?
Elements? 1?
Gain? – 2.0 dBi?
Front To Back Ratio? 0 dB?
Beam Width Ver? + – 180 Degrees?
Windload? 16 N?
Weight? 0.6 kg?
Dimensions LxWxH? ? 505 mm?
EAN-number? 5702661001895?
Remarks? Omni-directional?
Related products
-
Add to cart360? antenna for 4G/5G signal reception.
Future-proof connectivity, wherever you are
Work, rest or play online reliably and quickly, wherever you?re staying ? TRIAX 5G antennas boost mobile broadband reception in places fibre doesn?t reach.
Simply connect to your choice of mobile broadband router to receive the maximum attainable mobile network speed at each location.
The antennas are ready for the advancing 5G roll-out across Scandinavia, bringing speeds up to 100x faster than 4G. They are fully compatible with all mobile signals: use the best possible 4G LTE speeds now, with no need for future upgrades when 5G arrives.
For the ultimate in speed and reliability, our antennas are MIMO compatible.
The antenna is delivered with 2m white twin cable with connectors, which are ready for mounting directly on the 2 antenna inputs on the router.
Specifications
CHARACTERISTICS
Antenna type omnidirectional
Antenna use indoor & outdoor
Polarization Antenna 1 – horizontal Antenna 2 – vertical
MIMO Yes
FREQUENCY
Frequency range 698-960/1710-2700/3300-3600/4800-5000 MHz
Services GMS/Wi-Fi/3G/4G/LTE/5G – (5G low band)
GAIN
Gain 4…6 dBi
VSWR 3
ELECTRICAL
Front to back ratio – horizontal > 21 dB
Impedance 50 ?
OPERATIONAL
IP rating 65
Lightning protection DC ground on the antenna
Temperature – operating -40… +60 ?C
CONNECTORS
Connector Type 2 x SMA-male
Output cable type PVC white UV protected low loss coaxial cable
MECHANICAL
Beamwidth horizontal 360 ?
Beamwidth vertical 120 ?
Diameter of installation pole 30-53 mm
Bracketry with wingnuts
Main material Plastic housing ABS
Colour RAL 1013 – White
Packing QTY 1
Product Height 200 mm
Product Length 215 mm
Product Depth 70 mm
Packaging Height 0,223 m
Packaging Width 0,221 m
Packaging Depth 0,089 m
Packaging Volume 0,004 m3
Net Weight 0,750 kg
Tara Weight 0,140 kg
Total Weight 0,890 kg -
Televes 4GNova Antenna Terrestrial 4G/LTE (SMA Male)
KSh23,178.00Add to cartAntenna transmission and reception of LTE/4G signals for extending coverage shielded or difficult propagation areas. The 4GNova antenna can directly connect to an LTE/4G router or a radiant indoor antenna.?Male SMA connector and 7.5m cable.
-
Pack of 5 DAB Televes Antennas
KSh61,928.00Add to cartPack of 5 terrestrial antennas of 3 elements, for VHF band III and DAB. 190-232 MHz. 3. Gain 8dB. Televes 105001
-
Add to cartOmnidirectional antenna for FM terrestrial reception (band II).
Characteristics
Antenna for FM terrestrial reception (band II).
Frequency 88-108 MHz.
Gain 1 dB.
Connection via type F connector.
Circular type.
Omnidirectional.
Terminal-bridge connections.
Impedance 75 W.
Technical specifications
MODEL IKF-1E / FM
REF. 1726
Frequencies 88 – 108 MHz
Nominal gain dB 1
D / A ratio dB 0
Opening angle H / V–
Wind load N
130 Km / h: 28
150 Km / h: 38
MANUAL/DATASHEET
-
Add to cartMIRA BOSS antenna (LTE700, 2nd Digital Dividend)
With optimized signal reception system
MIRA BOSS is an indoor DTT antenna with outstanding performance, thanks to its optimized UHF reception system. The antenna dish allows for a slight change in antenna orientation to adjust the reception and improve signal quality.
The BOSS Tech system automatically controls the level of the received signal (either very high or very low) to always provide optimal output level. The new design using TForce technology makes this intelligent device even more versatile.
The antenna is provided with PSU and IEC cable lead.
RED compliant
Highlights
Intelligent antenna equipped with the BOSS system, which automatically regulates the gain to always provide the optimum output level, even in low-coverage areas
Its optimized reception system allows to adjust the rotation of the antenna to maximize the signal level
A more stable reception: supports signal variations or fading without any impact on the TV installation
DTT coverage area enhancement
2 operating modes with a switch: low/high power, for one/several TVs
Plug & Play: Easy and fast installation; just plug in and scan channels
Main features
The antenna is powered with the included PSU (jack connector, 12V). But it also can be powered in remote mode through the coaxial connector, using a current injector (5V)
The electronics inside the antenna substantially reduces the interference caused by surrounding movements
LTE-Ready: equipped with LTE filters to avoid mobile phone signals caused by the use of 5G/4G devices in the environment
Low power consumption in intelligent mode
In areas of good coverage, the antenna can also be operate in passive mode (without power)
European electronics design and manufacturing
TForce technologyTeleves transitions from the traditional silicon era into a new era of electronic component design, allowing integrated circuits to be precisely manufactured for microwave frequency bands. Utilizing ?State of the Art? MMIC technology TForce is manufactured using semiconductor compounds such as gallium arsenide (GaAs), providing the resulting products with unparalleled features and performance
Televes has reinvented the antenna concept. Until now, an antenna was just the reception component of a TV installation in which gain and directivity were the main features. The introduction of a smart device like BOSS provides the antenna with the capacity to receive very weak signals without the risk of being affected by very strong signals, the result is a dynamic balance between weak and strong signals that provides optimum signal levels at all times: the “dynamic range” concept turns out to be the most outstanding among quality parameters.
The creation of TForce with BOSS technology using MMIC components is an extraordinary milestone in the optimization of the dynamic range. The technology that allowed the reception of lost signals from distant satellites is now allowing the enhancement of the coverage range in DTT installations.
Specifications
Frequency range MHz 470…694
Gain dBi 18
Noise figure dB 3
Power supply Local Vdc 12
Remote 5-12
Consumption Local mA 70
Remote 55-70
Protection index IP 20
Operating temperature ?C -5 … +45
Reviews
There are no reviews yet.