Welcome to Alcatraz Dish Network Services!
Wishlist

Category

LNB Inverto Black Premium Twin 40mm LTE 0.2dB

LNB Inverto Black Premium Twin 40mm LTE 0.2dB

This model is replaced by the?INVERTO-5446

This high-end LNB was specially selected from our production line. andIt sets new standards of quality and reliability.The LNB enables the reception of signals from one satellite and its distribution to maximum two Set Top Boxes with Single Tuner (or to one STB with Twin Tuner). It is ready for High Definition transmissions and provides excellent Noise Figure performance. Designed to meet strict specifications and manufactured to the highest industry quality standards, this LNB is an ideal solution for the satellite broadcast reception across Europe.

Main Features
Very low Noise Figure
Low Phase Noise, DVB-S2 (HDTV) compliant
Low Power Consumption
High Cross Polarization Isolation
High Frequency Stability
Specifications
Inverto IDLB-TWNL40-PREMU-OPP
Low Band Input Frequency Range 10.7 ~ 11.7 GHz
Low Band Output Frequency Range 950 ~ 1950 MHz
Low Band LO Frequency 9.75 GHz
High Band Input Frequency Range 11.7 ~ 12.75 GHz
High Band Output Frequency Range 1100 ~ 2150 MHz
High Band LO Frequency 10.6 GHz
Noise Figure 0.2 dB Typ. (0.7 dB Max.)
LO Initial Accuracy +/- 1.0 MHz Max.
LO Temperature Drift +/- 3.0 MHz Max.
Phase Noise (@ 10 kHz) – 85 dBc / Hz Max.
Conversion Gain 55 dB Min.
Gain Ripple (Over 26MHz Bandwidth) +/- 0.75 dB
Gain Variation (Over Full Band)? +/- 4 dB Max.
Image Rejection 40 dB Min.
1 dB Compression Point (@ Output) 0.0 dBm Min.
Cross Polarization Isolation 22 dB Min.
Control Signal Ca (Vertical Polarization) 11.0 ~ 14.0 V
Control Signal Cb (Horizontal Polarization) 16.0 ~ 20.0 V
Control Signal Cc (Band Switching) 22 +/- 4 kHz
Output VSWR 2.5 : 1
In-Band Spurious – 60 dBm Max.
Current Consumption 180 mA Max. @ 11 ~ 20 V
Operating Temperature – 30 ?C ~ + 60 ?C
Output Impedance 75 O
Output Connector F-Type (Female)
Weight 181 g

Reviews

There are no reviews yet.

Be the first to review “LNB Inverto Black Premium Twin 40mm LTE 0.2dB”

Your email address will not be published. Required fields are marked *

Category:

Related products

  • LNB Inverto Twin Monoblock 23mm, 3? for 80cm satellite dish

     KSh7,454.00

    Specifically designed for the European DTH markets, this Monoblock LNB allows for dual satellite reception. It can be used for satellite broadcast reception (on an 80cm antenna dish) of any two satellites spaced with 3?. This LNB enables the signal distribution to a Set Top Box with Single Tuner. It is optimized for High Definition transmissions and provides excellent Noise Figure performance. Designed to meet strict specifications and manufactured to the highest industry quality standards, this LNB is an ideal solution for satellite broadcast reception across Europe.

    Features
    Low Phase Noise, DVB-S2 (HDTV) compliant
    Low Noise Figure (0.2 dB)
    Low Power Consumption
    Very high Cross Polarization Isolation
    Very high Frequency Stability

    Specifications
    Technical specifications
    Low band input frequency range 10.7 GHz ~ 11.7 GHz
    Low band output frequency range 950 MHz ~ 1950 MHz
    Low band LO frequency 9.75 GHz
    High band input frequency range 11.7 GHz ~ 12.75 GHz
    High band output frequency range 1100 MHz ~ 2150 MHz
    High band LO frequency 10.6 GHz
    Noise figure 0.2 dB typ. (0.7 dB max.)?
    LO temperature drift ?3.0 MHz Max.
    LO initial accuracy ?1.0 MHz Max.
    LO phase noise @ 10 kHz -80 dBc / Hz max.
    Conversion gain 50 dB ~ 60 dB
    Gain ripple (over 26 MHz bandwidth) ?0.75 dB
    Gain variation (over full band) ?4 dB max.
    Image rejection 40 dB min.
    1 dB compression point (@ output) 0.0 dBm min.
    Control, Satellite A/B/C/D Selection DiSEqC 1.0 (Sat A* = East Satellite Position, Sat B = West Satellite Position)
    * Default Satellite Reception
    Cross polarization isolation 22 dB min.
    Output VSWR 2.0 : 1?
    In band spurious level -60 dBm max.
    Current consumption 210 mA max. @ 11 V ~ 20 V
    Operating temperature -30 ?C??~??+60 ?C
    Output impedance 75 ?
    Output connector type F-Type (female)
    Recommended Dish Size 75-85 cm (F/D = 0.6)
    Weight 460 g

    Add to cart
    Quick View

  • Inverto LNB Quad Black Ultra High Gain Low Noise 40mm PLL 8K

    Inverto?s high-performance Ultra LNBs were specifically designed to address the need for superior reception under the edges of the satellite footprint skirt, small dish sizes or long coax cables. Thanks to its novel feed horn design and superior front-end components, this LNB provides higher conversion gain yet with low noise figure and best phase noise performance. The combination of innovative feed horn design, higher spec components, excellent cross polarization isolation and advanced filter design enables improved handling of interfering and spurious signals. This LNB provides a leap in the overall reception performance compared with standard LNBs, enabling the reception of signals from one satellite, its distribution to four Set Top Boxes with Single Tuner (or two STB with Twin Tuner each) and is ready for Ultra High Definition TV transmissions in 4K or 8K resolution. Designed to meet strict specifications and manufactured to the highest industry standards, this unique range of LNBs is an ideal solution for installations with challenging reception conditions.

    Features
    Novel feed horn design
    Superior Phase Noise performance, DVB-S2X compliant supporting Ultra HD (4K and 8K) TV
    Excellent Cross Polarization Isolation
    Very Low Spurious Levels
    Superior Noise Figure with high Conversion Gain
    High 4G Immunity
    Ultimate Reliability

    Specifications
    Technical specifications
    Low band input frequency range 10.7 GHz ~ 11.7 GHz
    Low band output frequency range 950 MHz ~ 1950 MHz
    Low band LO frequency 9.75 GHz
    High band input frequency range 11.7 GHz ~ 12.75 GHz
    High band output frequency range 1100 ~ 2150 MHz
    High band LO frequency 10.6 GHz
    Noise figure 0.6 dB typ. (1 dB Max.)
    LO temperature drift ? 2.0 MHz max.
    LO initial accuracy ? 1.0 MHz max.
    LO phase noise @ 1 kHz -70 dBc/Hz
    LO phase noise @ 10 kHz -80 dBc/Hz
    LO phase noise @ 100 kHz -90 dBc/Hz
    LO phase noise @ 1 MHz -100 dBc/Hz
    Conversion gain 60 ~ 70 dB
    Gain ripple (over 26 MHz bandwidth) 1 dB max. (peak-to-peak)
    Gain variation (over full band) 4 dB max. (peak-to-peak)
    Image rejection 50 dB min.
    3th order intermodulation – ICP3 +10 dBm min
    1 dB compression point (@ output) 0 dBm min.
    Cross polarization isolation 22 dB min.
    Control signal Ca (V) 10.0 V ~ 14.0 V
    Control signal Cb (H) 16.0 V ~ 20.0 V
    Control signal Cc (band switching) 22 kHz ? 4 kHz
    Output VSWR 2.0 : 1 max.
    In band spurious level -65 dBm max.
    Current consumption 200 mA max. (10 VDC ~ 20 VDC)
    Operating temperature -30 ?C ~ +60 ?C
    Output impedance 75 ? (F-type)
    Output connector type F-Type (female)
    Weight 177.4 g

    Read more
    Quick View

  • QUAD LNB converter 4 out universal offset horn Televes

     KSh13,392.00

    Range of universal LNBs low noise figure and high gain that allow capturing signals in the KU band.

    Add to cart
    Quick View

  • Inverto LNB Twin Black Ultra 40mm High Gain Low Noise PLL 8K

    Inverto?s high-performance Ultra LNBs were specifically designed to address the need for superior reception under the edges of the satellite footprint skirt, small dish sizes or long coax cables. Thanks to its novel feed horn design and superior front-end components, this LNB provides higher conversion gain yet with low noise figure and best phase noise performance. The combination of innovative feed horn design, higher spec components, excellent cross polarization isolation and advanced filter design enables improved handling of interfering and spurious signals. This LNB provides a leap in the overall reception performance compared with standard LNBs, enabling the reception of signals from one satellite, its distribution to two Set Top Boxes with Single Tuner (or one STB with Twin Tuner) and is ready for Ultra High Definition TV transmissions in 4K or 8K resolution. Designed to meet strict specifications and manufactured to the highest industry standards, this unique range of LNBs is an ideal solution for installations with challenging reception conditions.

    Features
    Novel feed horn design
    Superior Phase Noise performance, DVB-S2X compliant supporting Ultra HD (4K and 8K) TV
    Excellent Cross Polarization Isolation
    Very Low Spurious Levels
    Superior Noise Figure with high Conversion Gain
    High 4G Immunity
    Ultimate Reliability

    Technical specifications
    Low band input frequency range 10.7 GHz ~ 11.7 GHz
    Low band output frequency range 950 MHz ~ 1950 MHz
    Low band LO frequency 9.75 GHz
    High band input frequency range 11.7 GHz ~ 12.75 GHz
    High band output frequency range 1100 ~ 2150 MHz
    High band LO frequency 10.6 GHz
    Noise figure 0.6 dB typ. (1 dB Max.)
    LO temperature drift ? 2.0 MHz max.
    LO initial accuracy ? 1.0 MHz max.
    LO phase noise @ 1 kHz -70 dBc/Hz
    LO phase noise @ 10 kHz -80 dBc/Hz
    LO phase noise @ 100 kHz -90 dBc/Hz
    LO phase noise @ 1 MHz -100 dBc/Hz
    Conversion gain 60 ~ 70 dB
    Gain ripple (over 26 MHz bandwidth) 1 dB max. (peak-to-peak)
    Gain variation (over full band) 4 dB max. (peak-to-peak)
    Image rejection 50 dB min.
    3th order intermodulation – ICP3 +10 dBm min
    1 dB compression point (@ output) 0 dBm min.
    Cross polarization isolation 22 dB min.
    Control signal Ca (V) 10.0 V ~ 14.0 V
    Control signal Cb (H) 16.0 V ~ 20.0 V
    Control signal Cc (band switching) 22 kHz ? 4 kHz
    Output VSWR 2.0 : 1 max.
    In band spurious level -65 dBm max.
    Current consumption 150 mA max. (10 VDC ~ 20 VDC)
    Operating temperature -30 ?C ~ +60 ?C
    Output impedance 75 ? (F-type)
    Output connector type F-Type (female)
    Weight 127.5 g

    Read more
    Quick View

  • Inverto LNB Single Black Ultra 40mm High Gain Low Noise PLL 8K

    Inverto?s high-performance Ultra LNBs were specifically designed to address the need for superior reception under the edges of the satellite footprint skirt, small dish sizes or long coax cables. Thanks to its novel feed horn design and superior front-end components, this LNB provides higher conversion gain yet with low noise figure and best phase noise performance. The combination of innovative feed horn design, higher spec components, excellent cross polarization isolation and advanced filter design enables improved handling of interfering and spurious signals. This LNB provides a leap in the overall reception performance compared with standard LNBs, enabling the reception of signals from one satellite, its distribution to a single tuner Set-top box and is ready for Ultra High Definition TV transmissions in 4K or 8K resolution. Designed to meet strict specifications and manufactured to the highest industry standards, this unique range of LNBs is an ideal solution for installations with challenging reception conditions.

    Features
    Novel feed horn design
    Superior Phase Noise performance, DVB-S2X compliant supporting Ultra HD (4K and 8K) TV
    Excellent Cross Polarization Isolation
    Very Low Spurious Levels
    Superior Noise Figure with high Conversion Gain
    High 4G Immunity
    Ultimate Reliability

    Specifications
    Technical specifications
    Low band input frequency range 10.7 GHz ~ 11.7 GHz
    Low band output frequency range 950 MHz ~ 1950 MHz
    Low band LO frequency 9.75 GHz
    High band input frequency range 11.7 GHz ~ 12.75 GHz
    High band output frequency range 1100 ~ 2150 MHz
    High band LO frequency 10.6 GHz
    Noise figure 0.6 dB typ. (1 dB Max.)
    LO temperature drift ? 2.0 MHz max.
    LO initial accuracy ? 1.0 MHz max.
    LO phase noise @ 1 kHz -70 dBc/Hz
    LO phase noise @ 10 kHz -80 dBc/Hz
    LO phase noise @ 100 kHz -90 dBc/Hz
    LO phase noise @ 1 MHz -100 dBc/Hz
    Conversion gain 60 ~ 70 dB
    Gain ripple (over 26 MHz bandwidth) 1 dB max. (peak-to-peak)
    Gain variation (over full band) 4 dB max. (peak-to-peak)
    Image rejection 50 dB min.
    3th order intermodulation – ICP3 +10 dBm min
    1 dB compression point (@ output) 0 dBm min.
    Cross polarization isolation 22 dB min.
    Control signal Ca (V) 10.0 V ~ 14.0 V
    Control signal Cb (H) 16.0 V ~ 20.0 V
    Control signal Cc (band switching) 22 kHz ? 4 kHz, 0.4V ? 0.8V pp
    Output VSWR 2.0 : 1 max.
    In band spurious level -65 dBm max.
    Current consumption 100 mA max. (10 VDC ~ 20 VDC)
    Operating temperature -30 ?C ~ +60 ?C
    Output impedance 75 ? (F-type)
    Output connector type F-Type (female)
    Weight 111.2 g

    Read more
    Quick View