LNB Inverto Quad Monoblock 23mm, 3? for 80cm satellite dish
KSh11,398.00
Specifically designed for the European DTH markets, this Monoblock LNB allows for dual satellite reception. This LNB can be used for satellite broadcast (on an 80cm dish antenna) reception of any two satellites spaced with 3?. This LNB enables the signal distribution to maximum four Set Top Boxes with Single Tuner (or two STBs with Twin Tuner). It is optimized for High Definition transmissions and provides excellent Noise Figure performance. Designed to meet strict specifications and manufactured to the highest industry quality standards, this LNB is an ideal solution for satellite broadcast reception across Europe.
Features
Low Phase Noise, DVB-S2 (HDTV) compliant
Low Noise Figure (0.2 dB)
Low Power Consumption
Very high Cross Polarization Isolation
Very high Frequency Stability
23mm feed
4 analog/digital outputs
switching via DiSEqC 1.0
60 month warranty
Specifications
Technical specifications
Low band input frequency range 10.7 GHz ~ 11.7 GHz
Low band output frequency range 950 MHz ~ 1950 MHz
Low band LO frequency 9.75 GHz
High band input frequency range 11.7 GHz ~ 12.75 GHz
High band output frequency range 1100 MHz ~ 2150 MHz
High band LO frequency 10.6 GHz
Noise figure 0.2 dB typ. (0.7 dB max.)?
LO temperature drift ?3.0 MHz Max.
LO initial accuracy ?1.0 MHz Max.
LO phase noise @ 10 kHz -80 dBc / Hz max.
Conversion gain 50 dB ~ 60 dB
Gain ripple (over 26 MHz bandwidth) ?0.75 dB
Gain variation (over full band) ?4 dB max.
Image rejection 40 dB min.
1 dB compression point (@ output) 0.0 dBm min.
Control, Satellite A/B/C/D Selection DiSEqC 1.0 (Sat A* = East Satellite Position, Sat B = West Satellite Position)
* Default Satellite Reception
Cross polarization isolation 22 dB min.
Output VSWR 2.5 : 1?
In band spurious level -60 dBm max.
Current consumption 250 mA max. @ 11 V ~ 20 V
Operating temperature -30 ?C??~??+60 ?C
Output impedance 75 ?
Output connector type F-Type (female)
Recommended Dish Size 75-85 cm (F/D = 0.6)
Weight 485 g
Related products
-
Alcad UE-301 Quad lnb, universal
KSh6,412.00Add to cartAlcad UE-301 – Serie 912: Quad lnb, universal.
Universal quad LNB for offset parabolic antennas, for individual installations.
High stability in frequency and high gain. The very low noise level provides quality reception in areas of weak signal.
Downloads
Technical specification
Technical specification
Catalogues
CATALOGUE_ALCAD_EN_MULTIMEDIA_TV pdf 5.42 MB
Certificates
CE Declaration UE-301 pdf 64.45 KB
Technical specifications
-
Read moreInverto?s high-performance Ultra LNBs were specifically designed to address the need for superior reception under the edges of the satellite footprint skirt, small dish sizes or long coax cables. Thanks to its novel feed horn design and superior front-end components, this LNB provides higher conversion gain yet with low noise figure and best phase noise performance. The combination of innovative feed horn design, higher spec components, excellent cross polarization isolation and advanced filter design enables improved handling of interfering and spurious signals. This LNB provides a leap in the overall reception performance compared with standard LNBs, enabling the reception of signals from one satellite, its distribution to four Set Top Boxes with Single Tuner (or two STB with Twin Tuner each) and is ready for Ultra High Definition TV transmissions in 4K or 8K resolution. Designed to meet strict specifications and manufactured to the highest industry standards, this unique range of LNBs is an ideal solution for installations with challenging reception conditions.
Features
Novel feed horn design
Superior Phase Noise performance, DVB-S2X compliant supporting Ultra HD (4K and 8K) TV
Excellent Cross Polarization Isolation
Very Low Spurious Levels
Superior Noise Figure with high Conversion Gain
High 4G Immunity
Ultimate ReliabilitySpecifications
Technical specifications
Low band input frequency range 10.7 GHz ~ 11.7 GHz
Low band output frequency range 950 MHz ~ 1950 MHz
Low band LO frequency 9.75 GHz
High band input frequency range 11.7 GHz ~ 12.75 GHz
High band output frequency range 1100 ~ 2150 MHz
High band LO frequency 10.6 GHz
Noise figure 0.6 dB typ. (1 dB Max.)
LO temperature drift ? 2.0 MHz max.
LO initial accuracy ? 1.0 MHz max.
LO phase noise @ 1 kHz -70 dBc/Hz
LO phase noise @ 10 kHz -80 dBc/Hz
LO phase noise @ 100 kHz -90 dBc/Hz
LO phase noise @ 1 MHz -100 dBc/Hz
Conversion gain 60 ~ 70 dB
Gain ripple (over 26 MHz bandwidth) 1 dB max. (peak-to-peak)
Gain variation (over full band) 4 dB max. (peak-to-peak)
Image rejection 50 dB min.
3th order intermodulation – ICP3 +10 dBm min
1 dB compression point (@ output) 0 dBm min.
Cross polarization isolation 22 dB min.
Control signal Ca (V) 10.0 V ~ 14.0 V
Control signal Cb (H) 16.0 V ~ 20.0 V
Control signal Cc (band switching) 22 kHz ? 4 kHz
Output VSWR 2.0 : 1 max.
In band spurious level -65 dBm max.
Current consumption 200 mA max. (10 VDC ~ 20 VDC)
Operating temperature -30 ?C ~ +60 ?C
Output impedance 75 ? (F-type)
Output connector type F-Type (female)
Weight 177.4 g -
Inverto PLL Single Premium Universal 40mm LNB
KSh1,960.00Add to cartSpecifically designed and selected to address the demand of the global DTH market for a competitive and 4G/LTE protected solution, this LNB provides optimized reception capabilities using the latest chipset technology and waveguide design for satellite signal reception. It enables the reception of satellite TV and radio from a single satellite and its distribution to a single tuner Set-top box. The LNB supports HD and UHD transmissions, delivers one-of-a-kind RF performances, very low power consumption and importantly engineered to mitigate interferences from 4G/LTE transmissions.
Manufactured to the highest industry quality standards and engineered to meet strict specifications, this LNB is an ideal solution for the demanding customer of DTH operators and satellite broadcast reception across the world. IDLP-SNL413-PREMU-OPN
Features
Low phase noise, DVB-S2 compatible (HD and UHD)
Very low noise figure
Low energy consumption
High cross polarization isolation
High frequency stability
Specifications
Technical specifications
Low band input frequency range 10.7ghz ~ 11.7ghz
Low band output frequency range 950MHz~1950MHz
Low band LO frequency 9.75ghz
High band input frequency range 11.7ghz ~ 12.75ghz
High band output frequency range 1100MHz~2150MHz
High band LO frequency 10.6ghz
Noise figure 0.2 dB typical. (0.7 dB max.)
LO temperature drift ?2.0 MHz max.
Initial accuracy LO ?500 kHz max.
LO phase noise at 1 kHz -70dBc/Hz
LO phase noise at 10 kHz -80dBc/Hz
LO phase noise at 100 kHz -90dBc/Hz
LO phase noise @ 1 MHz -100dBc/Hz
Conversion gain 57dB ~ 67dB
Ripple gain (over 26 MHz bandwidth) 1 dB max (peak to peak)
Gain variation (over full band) 4 dB max (peak to peak)
Image rejection 40 dB min.
3rd order intermodulation – ICP3 +10 dBm min.
1 dB compression point (@ output) 0 dBm min.
Cross polarization isolation 22 dB min.
Ca (V) control signal 10.0v ~ 14.0v
Control signal Cb (H) 16.0v ~ 20.0v
Control signal Cc (band shift) 22 kHz ? 4 kHz, 0.4V ? 0.8Vpp
Exit ROE 2.0 : 1 max.
Spurious level in band -65 dBm max.
Current consumption 100mA max (10VDC ~ 20VDC)
Operating temperature -30 ?C ~ +60 ?C
Output impedance 75 ? (type F)
Output connector type Type F (female)
Weight 111 g -
-
Alcad UE-203 Twin lnb, universal
KSh5,880.00Add to cartAlcad UE-203 – Serie 912: Twin lnb, universal.
Universal twin LNB for offset parabolic antennas, for individual installations.
High stability in frequency and high gain. The very low noise level provides quality reception in areas of weak signal.
Downloads
Technical specification
Technical specification
Catalogues
CATALOGUE_ALCAD_EN_MULTIMEDIA_TV pdf 5.42 MB
Certificates
CE Declaration UE-203 pdf 64.45 KB
Technical specifications
Reviews
There are no reviews yet.