Alcad UE-404 Quattro lnb, universal
KSh6,848.00
Alcad UE-404 – Serie 912: Quattro lnb, universal.
Universal quattro LNB for offset parabolic antennas, for collective installations.
High stability in frequency and high gain. The very low noise level provides quality reception in areas of weak signal.
Downloads
Technical specification
Technical specification
Catalogues
CATALOGUE_ALCAD_EN_MULTIMEDIA_TV pdf 5.42 MB
Certificates
CE Declaration UE-404 pdf 64.45 KB
Technical specifications
Related products
-
Alcad UE-301 Quad lnb, universal
KSh6,412.00Add to cartAlcad UE-301 – Serie 912: Quad lnb, universal.
Universal quad LNB for offset parabolic antennas, for individual installations.
High stability in frequency and high gain. The very low noise level provides quality reception in areas of weak signal.
Downloads
Technical specification
Technical specification
Catalogues
CATALOGUE_ALCAD_EN_MULTIMEDIA_TV pdf 5.42 MB
Certificates
CE Declaration UE-301 pdf 64.45 KB
Technical specifications
-
Read moreThe LNB is supplied with a 40 mm plastic ring adaptor to allow mounting onto a standard 40mm LNB holder.
Specifically designed for the European DTH markets, this Monoblock LNB allows for dual satellite reception. It can be used for satellite broadcast reception (on an 80cm dish antenna) of the Astra 19.2E and 23.5E satellites spaced with 4.3**. It enables the signal distribution to maximum two Set-Top Boxes with Single Tuner (or one STB with Twin Tuner). The LNB is optimized for Ultra High Definition transmissions and provides excellent Noise Figure performance. Designed to meet strict specifications and manufactured to the highest industry quality standards, this LNB is an ideal solution for satellite broadcast reception across Europe.
Features
Low Phase Noise, DVB-S2 UHD TV compliant
Low Noise Figure
Low Power Consumption
Very high Cross Polarization Isolation
Very high Frequency StabilitySpecifications
Technical specifications
Low band input frequency range 10.7 GHz ~ 11.7 GHz
Low band output frequency range 950 MHz ~ 1950 MHz
Low band LO frequency 9.75 GHz
High band input frequency range 11.7 GHz ~ 12.75 GHz
High band output frequency range 1100 MHz ~ 2150 MHz
High band LO frequency 10.6 GHz
Noise figure 0.6 dB typ.
LO temperature drift **2.0 MHz max.
LO initial accuracy **600 kHz max.
LO phase noise @ 1 kHz -70 dBc / Hz max.
LO phase noise @ 10 kHz -80 dBc / Hz max.
LO phase noise @ 100 kHz -90 dBc / Hz max.
Conversion gain 55 dB ~ 68 dB
Gain ripple (over 26 MHz bandwidth) **0.75 dB
Gain variation (over full band) **4 dB max.
Image rejection 40 dB min.
3th order intermodulation – ICP3 10.0 dBm min.
1 dB compression point (@ output) 0.0 dBm min.
Control, Satellite A/B/C/D Selection DiSEqC 1.0 (Sat A* = ASTRA 19.2** East, Sat B = ASTRA 23.5** East)
* Default Satellite Reception
Cross polarization isolation 22 dB min.
Output VSWR 2.0 : 1**
In band spurious level -60 dBm max.
Current consumption 210 mA max. @ 11 V ~ 20 V
Operating temperature -30 **C****~****+60 **C
Output impedance 75 **
Output connector type F-Type (female)
Recommended Dish Size 80 cm (F/D = 0.6)
Weight 290 g -
Inverto Inverto LNB Pro Wideband 40mm whit…
KSh5,980.00Add to cartSpecifically designed to meet DTH operators’ growing demand for lower cost MDU and Multi-tuner Home Gateway installations. This professional LNB is based on a single 10.40 GHz local oscillator that delivers exceptional RF performance across the entire frequency range (L-band) on two output ports (vertical and horizontal) combined with increased immunity against terrestrial/4G interference. .
Manufactured to the highest industry quality standards and designed to meet strict specifications, this LNB is an ideal solution for cost-effective reception of a satellite and its distribution to home gateways with multiple tuners or multiple switches with LNB inputs. compatible broadband.
Features
Local oscillator: 10.40 GHz
Low phase noise, compatible with DVB-S2 (HDTV)
Low noise design
Low energy consumption
High cross polarization isolation
High frequency stability (PLL)
Greater immunity against 4G interference
Specifications
Technical specifications
Input frequency range 10.7GHz ~ 12.75GHz
IF frequency range 300~2350MHz
noise figure 0.7 dB typ. (1 dB maximum)
Low Frequency 10.40GHz
LO frequency accuracy at 25** **0.5MHz
LO temperature drift **1MHz
LO phase noise at 10 kHz – 80 dBc / Hz max.
conversion gain 50dB ~ 60dB min.
Gain Variation (Bandwide) **0.5dB @ 27MHz
Image rejection 40 dB min. (8.05 GHz to 10.1 GHz)
1 dB compression point (@ output) 0.0 dBm min.
Cross polarization isolation 25 dB min.
VSWR output 2.5:1
At the spurious band level -60 dBm max
Current consumption 100mA max @11V~20V
Operating temperature -30**C ~ +60**C
Output impedance 75**
Output connector type F-Type (female)
Weight 98g -
Read moreSpecifically designed and selected to address the demand of the global DTH market for a competitive and 4G/LTE protected solution, this LNB provides optimized reception capabilities using the latest chipset technology and waveguide design for satellite signal reception. The LNB enables the reception of Satellite TV and radio from one satellite and its distribution via a Multiswitch to numerous Set-top boxes. The LNB supports HD and UHD transmissions, delivers one-of-a-kind RF performances, very low power consumption and importantly engineered to mitigate interferences from 4G/LTE transmissions. Manufactured to the highest industry quality standards and engineered to meet strict specifications, this LNB is an ideal solution for the demanding customer of DTH operators and satellite broadcast reception across the world.
Features
Low Phase Noise, DVB-S2 (HD and UHD) compliant
Very low Noise Figure
Low power consumption
High Cross Polarization Isolation
High Frequency stability
Specifications
Input frequency range 10.7 GHz ~ 12.75 GHz
Output frequency range 950 MHz ~ 2150 MHz
Low band LO frequency 9.75 GHz
High band LO frequency 10.6 GHz
Noise figure 0.2 dB typ. (0.7 dB max.)
LO frequency accuracy @ 25** C **500 kHz max.
LO temperature drift **1.0 MHz max.
LO phase noise @ 10 kHz -80 dBc/Hz max.
Conversion gain 55 dB min.
Gain ripple (over 26 MHz bandwidth) **0.6 dB
Gain variation (over full band) **3 dB
Image rejection 40 dB min.
3th order intermodulation – ICP3 10 dBm min.
1 dB compression point (@ output) 0 dBm min.
Cross polarization isolation 22 dB typ., 20 dB min.
Control signal Ca (V) 11.0 V ~ 14.0 V
Control signal Cb (H) 16.0 V ~ 20.0 V
Control signal Cc (band switching) 22 kHz **4 kHz, 0.4 V ~ 0.8 V pp
Output VSWR 2.5 : 1
In band spurious level -60 dBm max.
Current consumption 240 mA max. @ 11 VDC ~ 20 VDC
Operating temperature -35 **C ~ +60 **C
Output impedance (LNB2) 75 **
Output connector type F-type (female)
Dish F/D ratio 0.6
Weight 221 g -
Reviews
There are no reviews yet.