Name: LTE/5G Very High Rejection Filter (VHR) ?EasyF? 47...694MHz...
SKU: TELEVES-405220
Availability: InStock

VHR (very High Rejection) LTE/5G filter, with DC pass

47…694 MHz (Ch.48), “EasyF” connection

LTE/5G filter with very high rejection against interference from channel 48 up. Allows DC pass from output to input. Suitable for outdoor use.

Highlights
Low insertion losses to avoid any impacts on the distributed signals
EasyF system: easy, quick and safe connectorization
Ultra-small ergonomic design
Fully automated manufacturing, subject to the most stringent quality controls
High-screening Zamak chassis
Features
Resistant ABS-plastic case for outdoor installation
Orange colour?
EasyF connection system: simplicity and savings

EasyF is an innovative connection concept where the inner conductor of the coaxial cable is directly inserted in the device, thus improving connection reliability. Thanks to the absence of F connectors, the chassis can be reduced and the connection of two cables secured with a a single screw.

Real time savings: speeding the installation is possible without the need for coaxial cable termination. Furthermore, there is no need for screwing the connectors on the device, which is sometimes difficult when there is little room
Connection reliability: the clamp holding the cables prevents the coaxial cable to come off
Cost savings: no additional connectors are required (neither F nor IEC)
Space optimization: inputs and outputs are always on the same side of the device to prevent coaxial cables from bending, and to make working inside cabinets and register boxes easier
Very easy three-step mounting: only screwing and unscrewing the covers is required to connect both cables:

1. Unscrew the device’s cover to access the connection

2. Insert the previously stripped coaxial cables

3. Close the cover and screw to ensure connection

Learn more about EasyF system reliability

With EasyF, the connection between the coaxial cable and the device is carried out using an automated system for contact insertion of the inner conductor, without any soldering.?

Always as new: the device’s operating life increases when the factor of solder wearing out with time is removed
Failure rate reduction: usually produced as a result of cold soldering joints
Electromagnetic behaviour optimization: for high frequencies
Our commitment with environment is reinforced: pollution caused by the welding process is eliminated and production power consumption is reduced
Specifications
Rejected band MHz 738 … 862
Rejected band attenuation dB > 40
Pass band MHz 47 … 694
Pass band attenuation dB 1
Number of inputs 1
Number of outputs 1
Connectors “EasyF” type
DC pass In.?Out
Max. current mA 300
Operating temperature ?C -5 … 45
Protection index 23