Triax TMB 502 S Programmable digital processor 2 SAT 20-80dB…
KSh83,854.00
Terrestrial channel processor with double SAT amplification that combines filtering, conversion and amplification of different antenna signals to two independent RF + SAT1 / RF + SAT2 high-level 2×118 dB?V outputs.
A single ICT headend
Single channel amplification function, channel conversion, two independent high gain satellite amplifiers, TERR and SAT mixer and 2 output lines.
The AGC (Automatic Gain Control) has been designed to comply with the standards, so that the output levels of the processed channels have a linear response with the difference in levels of ? 1 dB, lower than the requirements of the ICT (? 3dB).
Easy to set up
The TMB 502 S control panel has a 2×16 LCD display with 5 control buttons and can be configured manually or automatically. The search function and automatic settings provide savings in installation time and increased profit.
The 2×16 LCD display gives us complete information on the signal levels, both input and output, providing a saving in installation time and a greater benefit.
Features
7 antenna inputs: 1xFM / 3xVHF / UHF / 1xVHF / UHF-DAB / 2 xSAT.
32 filter Flex Matrix that allows processing of individual channels to any output channel.
CAG in real time and separately on all multiplexes.
50 dB of adjacent channel rejection.
High gain 20 – 80 dB.
VHF / UHF channel conversion.
2 SAT amplifiers (2 x40 dB).
2 RF-SAT1 / RF SAT2 high-level outputs (2×118 dB?V).
Selection of reject filters
LTE 700-5G / 800-4G.
Equalization to compensate for the slope produced by the Coaxial cable.
Access blocking by security code.
Switchable remote power: 0/12/24 VDC
(TERR) and 13 / 18VDC (SAT).
USB port to export and import configurations.
Specifications
Related products
-
Add to cartConfigurable headend multiband amplifier for MATV systems with separate amplification that guarantees the absence of intermodulation among inputs. Equipped with 5 inputs: FM-VHF-UHF-21…32-34….48. The UHF band is divided in 2 of the inputs, which is useful in two-repeater reception installations since it allows an appropriate filtering of the channels for each of them.
-
Add to cartConfigurable headend amplifier for SMATV systems with separate amplification that guarantees the absence of intermodulation between inputs. It consists of 4 inputs: FM-VHF-UHF-FI, the VHF and UHF ones have two selectable gain margins while the FM input has a single amplifier stage.
-
Central T.0X Televes
KSh66,776.00Add to cartT.0X AMPLIF. 47…862MHz G44dB Vs120dB?V Televes 5575. Low distortion of second and third order that allow high output voltage (typical values of 120 dB?V). It has two signal inputs. Equipped with test output.
-
Headsets DTKOM 5 inputs 1 output U-BV-BIV-V-FM Televes
KSh118,026.00Add to cartHead station DTKom 5 inputs / 1 output FM-VHF-BIV-BV-UHF. Range of power stations designed for both header and distribution use. Designed to facilitate adjustment processes, thanks to its arrangement of microswitches and trimmers that can be manipulated from the outside of the plant. Televes 4509
-
DTKom broadband multiband amplifier 5 inputs:…
KSh79,264.00Add to cartHigh-power multiband amplifier with multiple controls on the front end, which design uses components that minimize the total noise figure. Equipped with 5 inputs (FM-BIII-21…36-38…48-UHF). The UHF band is divided in 2 of the inputs, which is useful in two-repeater reception installations since it allows an appropriate filtering of the channels for each of them.
Equipped with LTE700 filtering.
RED compliant
Highlights
Separate amplification minimizes intermodulation between bands and provides high output levels
Designed using Push-Pull technology, which guarantees levels in the 123 dB?V range for terrestrial signals.
Includes a high-performance low-power consumption switch-mode power supply
High-screening Zamak chassis The design facilitates appropriate cooling
Features
Switch for pre-amplifier or BOSS system powering
Switched configurable gain (high/low), and high output level
Intuitive front cover, including adjustments and block diagram
Output signal LED indicator
Specifications
Bands UHF BV BIV BIII FM
Frequency margin MHz 470 … 694 606 … 694
(Ch38…48) 470 … 598
(Ch21…36) 174 … 370 88 … 108
Gain 0 dB 42 41(1) 41(2) 42 25
10 32 31(1) 31(2) 32 25
Gain margin (Manual)
0 … 20 (Manual)
0 … 20 (Manual)
0 … 20 (Manual)
0 … 20 (Manual)
0 … 20
Max. output level IMD3 (2 tones,-35 dB) dB?V
(dBmV) 125 (65)
DIN 45004B 123 (63)
IMD3 (2 tones,-60 dB) 120 (60)
IMD2 (2 tones,-60 dB) – – – 122 (62) –
Noise figure dB 10 10 10 5 6
Test -20
Powering inputs V= 12
Max. curent inputs mA 50
Mains voltage /frequency V~ / Hz 120 … 230 / 50-60
Total AC consumption OFF W / mA 5,8 / 120
ON W / mA 9,6 / 180
Protection level IP 20
Operating temperature range ?C (?F) -5 … +45 (23 … 113)(1) G(Ch38)=37/27dB
(2) G(Ch36)=38/28dB
Reviews
There are no reviews yet.