Category: Networking
Networking
Showing 481–560 of 648 results
-
Read moreA 2.4 GHz 8 dBi Omni Antenna for the wAP LR2 kit. If necessary, this antenna can be used for any 2.4 GHz device.
-
-
Read more60 GHz CPE with Phase array 60° beamforming Integrated antenna, 716 Mhz CPU, 256 MB RAM, PSU and PoE, RouterOS L3
-
Read more60 GHz Base Station with Phase array 60° beamforming Integrated antenna, 716 Mhz CPU, 256 MB RAM, PSU and PoE, RouterOS L4
-
Read morewAP ac – a small dual-band weatherproof wireless access point for mounting on a pole, wall, or the ceiling. The new revision features 2x Gigabit Ethernet ports, enhanced wireless antenna performance, more RAM, and a powerful quad-core CPU!
-
Read moreA refresh of the classic dual-band wAP LTE kit with Gigabit Ethernet – this time with a brand new LTE modem that brings the PRICE DOWN and the performance UP!
-
-
Read morewAP ax brings fast and reliable Wi-Fi 6 to your countryside getaway or any other challenging environments – like a rural gas station or a bus stop.
-
Read moreOur newest out-of-the-box solution for LoRa® technology. Works with the 2.4 GHz frequency for LoRa®. Doesn’t interfere with the 2.4 GHz WLAN signal!
-
-
-
Read moreA refresh of the classic weatherproof wAP LTE kit – with a new LTE modem that brings the PRICE DOWN and the performance UP! Disruptive pricing: the best OUTDOOR LTE/WI-FI deal on the market if you’re on a tight budget.
-
-
-
-
Read moreA preconfigured kit of two Cube 60Pro ac (802.11ay 60 GHz) devices: the Wireless Wire Cube Pro. Just point the Cubes at one another and power them on! They will form a blazing fast encrypted wireless connection. Pure plug-and-play!
-
-
Read moreThe most compact wireless 2 Gb/s aggregate link in the 1500 m range or more! Improved snow-resistant design is perfect for harsh weather environments. Cables can no longer limit you!
-
Read moreA QSFP28 module for distances up to 2km in your 100 Gigabit setups. 1271, 1291, 1311, 1331 nm
-
-
Read moreThe MikroTik 40/100 Gigabit product line keeps growing: QSFP28 module for distances up to 100m
-
Read moreA QSFP28 to 4x SFP28 break-out cable. Allows connecting multiple 25 Gigabit devices to your CCR2216/CRS504 devices.
-
Read moreAn economic QSFP28 to SFP28 converter that allows the use of SFP28 25G/10G/1G modules in QSFP28 100G/40G ports.
-
Read moreA 40/100 Gbps QSFP28 direct attach cable, 1m long. Enables easy direct connectivity between two 100 Gigabit devices. Fairly flexible.
-
Read moreA longer version of our 40/100 Gigabit QSFP28 direct attach cable. This cable is 3 meters long – the perfect length to reach all the necessary spots while keeping your server room neat and tidy.
-
-
-
-
Read moreDirect attach cable that supports not only SFP 1G and SFP+ 10G, but also the 25G SFP28 standard!
-
Read moreDirect attach cable that supports not only SFP 1G and SFP+ 10G, but also the 25G SFP28 standard!
-
Mounting panel for Rack 19″ 4U (Depth 62 mm) Televes
KSh27,418.00Add to cartDesigned for easy installation on it of amplification equipment that does not have a rackable structure: DTKom, MicroKom, Avant X, Avant 6, FiberKom or CoaxData (except ref. televes-769301).
-
Mounting plate 300×400, 19mm Televes
KSh6,440.00Add to cartMetal plates that allow a simple assembly of multiswitches, amplifiers and grounding components. Dimensions: 300x400mm. The plates have a spacer of approximately 2cm (19mm) to get enough distance from the wall and thus be able to screw the components easily with 3mm sheet metal screws. Televes 5894
-
Add to cartAdapter that allows male optical connectors to be connected to each other, with SC mechanics, at both ends. Compatible with multimode fibers (MM)
-
Add to cartMultimode (MM) fiber optic patch cord pre-terminated at both ends using LC/PC connectors. It is convertible to Pigtail offering the versatility to adapt its functionality according to the requirement. It is used in a standard way for the interconnection of optical equipment.
-
Add to cartDesigned to house the equipment separating the user’s network from the community’s. Specified to meet the ICT2 requirements and designed to be placed in the NTE, it works as a enclosure that houses the different technologies; can be manipulated by the user.?Televes 546701
-
Network Termination Registration for…
KSh19,764.00Add to cartDesigned to house the equipment separating the user’s network from the community’s. Specified to meet the ICT2 requirements and designed to be placed in the NTE, it works as a enclosure that houses the different technologies; can be manipulated by the user.
-
Add to cartMulti-mode (MM) optical-fiber duplex patch cord Pre-terminated with SC/PC connectors for the connection of the elements of an optical network. Furthermore, since they are duplex, they are suitable for use in point-to-point networks that use the same window for both upstream and downstream traffic. The sheath being LSFH, it is recommended for indoor use. Supplied in individual packing.
-
Add to cartMulti-mode (MM) optical-fiber duplex patch cord Pre-terminated on one end with an LC/PC connector and with an SC/PC connector on the other; it can thus be used as an adapter for devices with different connectorization. Furthermore, since they are duplex, they are suitable for use in point-to-point networks that use the same window for both upstream and downstream traffic.
-
Add to cartMulti-mode (MM) optical-fiber duplex patch cord Pre-terminated with LC/PC connectors for the connection of the elements of an optical network. Furthermore, since they are duplex, they are suitable for use in point-to-point networks that use the same window for both upstream and downstream traffic. The sheath being LSFH, it is recommended for indoor use.
-
Add to cartMulti-mode (MM) optical-fiber duplex patch cord Pre-terminated on one end with an LC/PC connector and with an SC/PC connector on the other; it can thus be used as an adapter for devices with different connectorization. Furthermore, since they are duplex, they are suitable for use in point-to-point networks that use the same window for both upstream and downstream traffic.
-
Add to cart2-way splitter with SC/APC connectors for optical signals in the 1260 nm-to-1650 nm range. Specially designed to complement the Overlight series. Also recommended for applications with WideBand LNB, with optical fibre or GPON networks. The compact frame is perfect for individual installations.
-
Add to cart4-way splitter with SC/APC connectors for optical signals in the 1260 nm-to-1650 nm range. Specially designed to complement the Overlight series. Also recommended for applications with WideBand LNB, with optical fibre or GPON networks. The compact frame is perfect for individual installations.
-
Add to cart8-way splitter with SC/APC connectors for optical signals in the 1260 nm-to-1650 nm range. Specially designed to complement the Overlight series. Also recommended for applications with WideBand LNB, with optical fibre or GPON networks. Its compact chassis is suitable for maximum optimisation of the available space.
-
Outdoor Case Black Mini Series Televes
KSh1,370.00Add to cartOutdoor protective case, for outdoor installation of mini-series distribution devices (Splitters and taps). Easy to install, thanks to the compact size and ergonomic design. Features Interior dimensions: 57 mm x 47 mm x 13 mm Built in black ABS plastic Sliding opening system Wall and mast mounting (flange provided)
-
Pack of 5 DAB Televes Antennas
KSh61,928.00Add to cartPack of 5 terrestrial antennas of 3 elements, for VHF band III and DAB. 190-232 MHz. 3. Gain 8dB. Televes 105001
-
Perforated wall plate 400x400x19mm Televes
KSh8,688.00Add to cartAllows the installation of active or passive equipment, leaving these accessible. It facilitates the installation of the product and improves the final image of the assembly. The installer can direct the output or input cables, in any direction. Televes 589401
-
Perforated wall plate 400x600x19mm Televes
KSh13,828.00Add to cartAllows the installation of active or passive equipment, leaving these accessible. It facilitates the installation of the product and improves the final image of the assembly. The installer can direct the output or input cables, in any direction. Televes 589402
-
Add to cartPigtail Single-mode (SM) fiber optic patch cord. It has one end pre-terminated with an SC/APC connector, and the other end without connector. This allows easy fusion of the pigtail against a fiber cable. The 900?m cover is LSFH type and is recommended for indoor use.
-
Add to cartPigtail Single-mode (SM) fiber optic patch cord. It has one end pre-terminated with an LC/UPC connector, and the other end without connector. This allows easy fusion of the pigtail against a fiber cable. The 900?m cover is LSFH type and is recommended for indoor use.
-
Add to cartPigtail Multi-Mode (MM) fiber optic patch cord. It has one end pre-terminated with an SC/PC connector, and the other end without connector. This allows easy fusion of the pigtail against a fiber cable. The 900?m cover is LSFH type and is recommended for indoor use.
-
Add to cartPigtail Multi-Mode (MM) fiber optic patch cord. It has one end pre-terminated with an SC/PC connector, and the other end without connector. This allows easy fusion of the pigtail against a fiber cable. The 900?m cover is LSFH type and is recommended for indoor use.
-
Add to cartPigtail Multi-Mode (MM)) fiber optic patch cord. It has one end pre-terminated with an LC/PC connector, and the other end without connector. This allows easy fusion of the pigtail against a fiber cable. The 900?m cover is LSFH type and is recommended for indoor use.
-
Add to cartPigtail Single-mode (SM) fiber optic patch cord. It has one end pre-terminated with an LC/APC connector, and the other end without connector. This allows easy fusion of the pigtail against a fiber cable. The 900?m cover is LSFH type and is recommended for indoor use.
-
Add to cart200m plastic coil.?2-fibre cable with LSFH sheath for outdoor installation. Each fibre has its own individual LSFH sheath and is identified with a specific colour. This provides a better organization and makes identification easier.?Televes 232001
-
Add to cart500m plastic coil.?2-fibre cable with LSFH sheath for outdoor installation. Each fibre has its own individual LSFH sheath and is identified with a specific colour. This provides a better organization and makes identification easier.?Televes 232002
-
Plastic coil 500m FK4 Cable of 4 Singlemode Fibers for…
KSh170,610.00Add to cart4-fiber cable with LSFH sheath for indoor installation. Each fiber has its own individual LSFH sheath and is identified with a specific colour. This provides a better organization and makes identification easier. Provided in 500 m plastic reels.
-
Add to cartPlastic coil of 750m.?2-fibre cable with LSFH sheath for indoor installation. Each fibre has its own individual LSFH sheath and is identified with a specific colour. This provides a better organization and makes identification easier. Televes 231902
-
Add to cartStrip of 8 Schuko-type 16A sockets, to provide power supply to equipment installed in 19″ rack racks. It occupies 1U of height and incorporates a light switch with protection cover.
-
Rack 19″ rack for 18 units. 600x942x600mm. Floor…
KSh142,628.00Add to cartThe 18U rack is used to introduce passive or active equipment inside, allowing it to be visible and protected under a secure structure (steel) and under lock and key. Compatible with fiber optic, data cable, or coaxial cable installations, it allows the different technologies to be grouped in the same cabinet. Designed for ground installation. Supplied assembled.
-
Rack 19″ rack for 22 units. 600x1120x600mm. Floor…
KSh172,036.00Add to cartThe 22U rack is used to introduce passive or active equipment inside, allowing it to be visible and protected under a secure (steel) and locked structure. Compatible with fiber optic, data cable, or coaxial cable installations, it allows the different technologies to be grouped in the same cabinet. Designed for ground installation. Supplied assembled.
-
Rack 19″ rack for 27 units. 600x1342x600mm. Floor…
KSh196,916.00Add to cartThe 27U rack is used to introduce passive or active equipment inside, allowing it to be visible and protected under a secure structure (steel) and under lock and key. Compatible with fiber optic, data cable, or coaxial cable installations, it allows the different technologies to be grouped in the same cabinet. Designed for ground installation. Supplied assembled.
-
Rack 19″ rack for 32 units. 600x1564x600mm. Floor…
KSh211,872.00Add to cartThe 32U rack is used to introduce passive or active equipment inside, allowing it to be visible and protected under a secure (steel) and locked structure. Compatible with fiber optic, data cable, or coaxial cable installations, it allows the different technologies to be grouped in the same cabinet. Designed for ground installation. Supplied assembled.
-
Add to cart8RU high chassis for wall or perforated plate mounting. It has been designed to house panels and boards, mainly for the organization of connectors.
-
Add to cartThe 37U rack is used to introduce passive or active equipment inside, allowing it to be visible and protected under a secure (steel) and locked structure. Compatible with fiber optic, data cable, or coaxial cable installations, it allows the different technologies to be grouped in the same cabinet. Designed for ground installation. Supplied assembled.
-
Add to cartThe 37U rack is used to introduce passive or active equipment inside, allowing it to be visible and protected under a secure (steel) and locked structure. Compatible with fiber optic, data cable, or coaxial cable installations, it allows the different technologies to be grouped in the same cabinet. It is ideal for installation of headends such as GPON. Supplied assembled.
-
Add to cartThe 42U rack is used to introduce passive or active equipment inside, allowing it to be visible and protected under a secure (steel) and locked structure. Compatible with fiber optic, data cable, or coaxial cable installations, it allows the different technologies to be grouped in the same cabinet. It is ideal for installation of headends such as GPON. Supplied assembled.
-
Add to cartDesigned to house SC Duplex or LC Quad adapters, thus allowing it to become a connection point between optical fibers (FO patch panel). Its use allows you to have a fixed fiber optic distribution network, to which you can supply different signals by means of a simple reconnection.
-
Rack Tray 19″ 2U (Depth 315mm) Televes
KSh8,826.00Add to cartDesigned for easy installation on it of equipment that does not have a rackable structure (routers, keyboards, PCs…). It has a series of perforations to favor the ventilation of the devices that are on it, as well as to be able to hold these by means of velcro tapes or flanges.
-
Rack Tray 19″ Televes 1 unit with 24 SC connectors
KSh18,902.00Add to cartThe frame (patch panel) has been designed for mounting with 24 individual SC / APC type connectors in RACK cabinets in the standard 19 “. This element is the final element of the structured fiber optic cabling system.
-
Add to cartRubber plug sized to fit SC Simplex and LC Duplex holes. These covers prevent the entry of dust or other elements into the unused connections of panels and trays, to avoid operating problems and extend the useful life of the rack elements.
-
Sailsky XM286 4G LTE Wireless Router
KSh12,000.00Add to cartSailsky XM286 4G LTE Wireless
RouterKey Features
Dimension: 195mm x 115mm x30mm
Antennas: 4 external antennas
Sim Cards: 1 sim card
Working Modes: 4G mode, Router mode, AP mode -
Add to cartScrew Kit for Rack 19?: Screw with washer and nut (50 units) Kit consisting of screw, washer and nut for the devices and rack accessories installation. Features Galvanised screw Black washer Caged nut M6 with slots of 8.5mm and thickness 2.5mm.
-
Secondary Register (RS) for Data/Coaxial/Fiber…
KSh25,894.00Add to cartDesigned mainly for use in ICT networks, its purpose is to house the elements that separate the distribution network from the dispersion network, acting as a point of union between both networks. Its usual point of installation is located on the party walls of each floor, although it can be used as a passage register in any type of installation.
-
Add to cart8RU high chassis for wall or perforated plate mounting. It has been designed to house panels and boards, mainly for the organization of connectors.
-
Side door lock for 19″ Rack, with 2 keys Televes
KSh1,246.00Add to cartThey reinforce the security of the Rack and are very useful in installations in public buildings or crowded places where it is difficult to maintain control over the flow of people near the installation.
-
Add to cartSingle-mode (SM) optical-fibre patch cord Pre-terminated with SC/APC connectors for the interconnection of optical equipment. 900 ?m-diameter pigtail type, its length can be reduced with the appropriate fusion tool. The sheath being LSFH, it is recommended for indoor use.?Televes 232602
-
Add to cartSingle-mode (SM) optical-fiber patch cord Pre-terminated with LC/APC connectors for the connection of the elements of an optical network. The sheath being LSFH, it is recommended for indoor use.
-
Add to cartSingle-mode (SM) optical fiber patch cord, Pre-terminated on one end with an LC/APC connector and with an SC/APC connector on the other; it can thus be used as an adapter for devices with different connectorization. The sheath being LSFH, it is recommended for indoor use.
-
Add to cartSingle-mode (SM) optical fibre patch cord, Pre-terminated on one end with an SC/APC connector and with an FC/UPC connector on the other; it can thus be used as an adapter for devices with different connectorization. The sheath being LSFH, it is recommended for indoor use.
-
Add to cartSingle-mode (SM) optical-fibre patch cord Pre-terminated with SC/APC connectors for the connection of the elements of an optical network. They are suitable for use in point-to-point networks that use the same window for both upstream and downstream traffic. The sheath being LSFH, it is recommended for indoor use.
Highlights
Low attenuation levels and high reliability
Connectors mechanically outphased on one end to facilitate wiring
Equipped with locks and removable fixing devices.
Dca-s2,d2,a1 Euroclass
Main features
ITU-T G.657A2 fibre type
LSFH sheath, orange colour
SC/APC connectors
Length 10m
Specifications
Technical specifications
Euroclass Type Dca-s2,d2,a1
Fiber Type Single Mode
Opctics connectors Type SC/APC
Cover material Type LSFH
Attenuation dB ? 0,8
Insertion losses dB < 0,5 Return losses (in each patch cord ) dB >60
Minimum radius of curvature mm 30
Outside diameter of the fiber mm 3
Popular Products
-
ONKRON Motorized Desk with Height
Adjustment max 132lbs, Black WDT221E
KSh37,045.00
-
ONKRON D101E Desktop Monitor Arm
13"-34"-Black
KSh4,628.00
-
ONKRON G100 13-32" DESKTOP MONITOR
MOUNT-BLACK
KSh11,206.00
-
ONKRON M2S 17-43" TILT/SWIVEL TV
WALL MOUNT- BLACK
KSh3,971.00
-
ONKRON PT3 32-75" SWIVEL TABLETOP TV
STAND- BLACK
KSh13,020.00
Products
-
ONKRON Motorized Desk with Height
Adjustment max 132lbs, Black WDT221E
KSh37,045.00
-
ONKRON D101E Desktop Monitor Arm
13"-34"-Black
KSh4,628.00
-
ONKRON G100 13-32" DESKTOP MONITOR
MOUNT-BLACK
KSh11,206.00
-
ONKRON M2S 17-43" TILT/SWIVEL TV
WALL MOUNT- BLACK
KSh3,971.00
-
ONKRON PT3 32-75" SWIVEL TABLETOP TV
STAND- BLACK
KSh13,020.00