Category: Amplification
Amplification
Showing 61–120 of 154 results
-
Add to cartAlcad DA-611 – Serie 904: Distribution amplifier tv-if (vr 30 mhz).
Broadband distribution amplifier for terrestrial TV (117 dBuV) and satellite (118.5 dBuV). It independent gain and slope controls for the terrestrial and satellite signal. It amplifies the return path from 5 to 30 MHz. Fed by a external power supply model FF-200 (included with the amplifier). The input and output test points permit checking and adjusting the installation with no need to disconnect the TV signal.
Used as a distribution amplifier in large terrestrial and IF band SMATV installations. Designed to permit the distribution of the IF band among groups of different buildings or houses from one single SAT headend.
Made from zamak and galvanised steel plates to provide maximum shielding. Input and output connectors on opposite sides to facilitate installation. F-type connectors.
Downloads
Technical specification
Technical specification
Manuals
DA-611 Manual pdf 782.2 KB
Catalogues
CATALOGUE_ALCAD_EN_MULTIMEDIA_TV pdf 5.42 MB
Certificates
CE Declaration – DA-611 pdf 68.47 KB
Technical specifications
-
Add to cartAlcad DA-613 – Serie 904: Distribution amplifier tv-if (vr 65 mhz).
Broadband distribution amplifier for terrestrial TV (117 dBuV) and satellite (118.5 dBuV). It independent gain and slope controls for the terrestrial and satellite signal. It amplifies the return path from 5 to 65 MHz. Fed by a external power supply model FF-200 (included with the amplifier). The input and output test points permit checking and adjusting the installation with no need to disconnect the TV signal.
Used as a distribution amplifier in large terrestrial and IF band SMATV installations. Designed to permit the distribution of the IF band among groups of different buildings or houses from one single SAT headend.
Made from zamak and galvanised steel plates to provide maximum shielding. Input and output connectors on opposite sides to facilitate installation. F-type connectors.
Downloads
Technical specification
Technical specification
Manuals
DA-613 Manual pdf 782.2 KB
Catalogues
CATALOGUE_ALCAD_EN_MULTIMEDIA_TV pdf 5.42 MB
Certificates
CE Declaration – DA-613 pdf 68.47 KB
Technical specifications
-
Alcad DA-720 Distribution ampl uhf+vhf/bs
KSh43,798.00Add to cartAlcad DA-720 – Serie 904: Distribution ampl uhf+vhf/bs.
Broadband distribution amplifier for terrestrial TV. It amplifies the VHF band plus interbands and the UHF band separately. Each band has a gain control and a variable equaliser. As they are independent they facilitate level djustment. Fed by a built-in power supply.
Applications
Used as a distribution amplifier in large community installations or cable networks. These installations commonly have long runs of cable which attenuate and unbalance the signal. The channels with higher frequencies attenuate more. The distribution amplifiers compensate this loss with the equaliser and amplify the channels adding as little noise as possible. The separated band amplifiers do not amplify the highest channels of the interband.
Characteristics
Made from zamak and galvanised plate for maximum shielding.Separate housings for the power supply unit and the high frequency circuit. F type connectors, located on the lower part to help with the installation.
Downloads
Technical specification
Technical specification
Manuals
DA-720 Manual pdf 570.97 KB
2610961.pdf pdf 167.23 KB
Catalogues
CATALOGUE_ALCAD_EN_MULTIMEDIA_TV pdf 5.42 MB
Certificates
CE Declaration – DA-720 20210716 pdf 70.62 KB
Technical specifications
-
Add to cartAlcad DA-741 – Serie 904: Distribution amplifier if-tv (rp 30 mhz).
Broadband distribution amplifier for terrestrial TV and IF satellite. It amplifies the return path, and is available in different frequencies according to the model. It has a gain control and slope control on each TV and SAT band. Fed by a built-in switching power supply. The input and output test point permits the checking and adjustment of the installation without having to disconnect the TV signal.
Applications
Used as a distribution amplifier in large terrestrial and IF band SMATV installations. Designed to permit the distribution of the IF band among groups of different buildings or houses from one single SAT head-end.
Characteristics
Made from zamak and galvanised steel for maximum shielding. Separate housings for the power supply unit and the high frequency circuit. F type connectors, located on the lower part to help with the distribution.
Downloads
Technical specification
Technical specification
Manuals
DA-741 Manual pdf 946.38 KB
DA-741 HN pdf 782.58 KB
Catalogues
CATALOGUE_ALCAD_EN_MULTIMEDIA_TV pdf 5.42 MB
Certificates
CE Declaration – DA-741-743 20210716 pdf 148.54 KB
Flyers
DA-741 and DA-743 distribution amplifiers pdf 1.26 MB
Technical specifications
-
Add to cartAlcad DA-743 – Serie 904: Distribution amplifier if-tv (rp 65 mhz).
Broadband distribution amplifier for terrestrial TV and IF satellite. It amplifies the return path, and is available in different frequencies according to the model. It has a gain control and slope control on each TV and SAT band. Fed by a built-in switching power supply. The input and output test point permits the checking and adjustment of the installation without having to disconnect the TV signal.
Applications
Used as a distribution amplifier in large terrestrial and IF band SMATV installations. Designed to permit the distribution of the IF band among groups of different buildings or houses from one single SAT head-end.
Characteristics
Made from zamak and galvanised steel for maximum shielding. Separate housings for the power supply unit and the high frequency circuit. F type connectors, located on the lower part to help with the distribution.
Downloads
Technical specification
Technical specification
Manuals
DA-743 Manual pdf 946.38 KB
DA-743 HN pdf 854.06 KB
Catalogues
CATALOGUE_ALCAD_EN_MULTIMEDIA_TV pdf 5.42 MB
Certificates
CE Declaration – DA-741-743 20210716 pdf 148.54 KB
Flyers
DA-741 and DA-743 distribution amplifiers pdf 1.26 MB
Technical specifications
-
Alcad DAM-504 Distribution amplifier 120 db?v
KSh53,768.00Add to cartAlcad DAM-504 – Serie 911: Distribution amplifier 120 db?v.
Broadband distribution amplifier for terrestrial and cable TV with power supply. It amplifies the terrestrial TV band and the return path separately. It has gain control regulator for each band and fixed equalizer in the TV band.
Applications
Designed to extend terrestrial and cable TV installations, analog or digital, in community facilities in return path. The signal levels are easily adjusted thanks to two gain controllers. Especially suitable for outdoor installations.
Characteristics Robust chassis made of aluminum that provides maximum shielding against interference, and protection in outdoor conditions (IP65). Separate housings for the power supply unit and the high frequency circuit. PG11-F type connectors.
Accessories
9080015 MC-204 Male compression F connector for RG-11 coaxial 9080030 MC-304 Male compression F connector for RG-6 coaxial, ?7.0 mm. 9120011 RS-275 F load 75O.
Downloads
Technical specification
Technical specification
Manuals
– pdf 165.87 KB
Catalogues
CATALOGUE_ALCAD_EN_MULTIMEDIA_TV pdf 5.42 MB
Technical specifications
-
Read moreAlcad DV-102 – Serie 909: Splitter 2 outputs (video).
Two output splitter to connect on the output of a video, DVD or satellite receiver. It can be used as a multiplexer of two inputs. Female IEC connector to connect to the equipment and male IEC output.
Downloads
Technical specification
Technical specification
Catalogues
CATALOGUE_ALCAD_EN_MULTIMEDIA_TV pdf 5.42 MB
Technical specifications
-
Alcad FA-410 Power supply 50 w (230/240 vac)
KSh51,312.00Add to cartAlcad FA-410 – Serie 912: Power supply 50 w (230/240 vac).
Switching power supply, which permits the installation of an amplifier and different modules on the support frame. Power supply with a flat cable of 20 lines for different feed voltages.
Applications
Required for feeding the modules of the equipment.
Characteristics
Protected against power surges, overloads and short-circuits. Zamak chassis with side gills to facilitate proper ventilation. Supplied with power cable.
Downloads
Technical specification
Technical specification
Manuals
– pdf 266.03 KB
Catalogues
CATALOGUE_ALCAD_EN_MULTIMEDIA_TV pdf 5.42 MB
Certificates
CE Declaration – FA-512 y FA-410 pdf 147.68 KB
Technical specifications
-
Alcad FA-512 Power supply 96 w (90-260 vac) himalaya
KSh81,896.00Add to cartAlcad FA-512 – Serie 912: Power supply 96 w (90-260 vac) himalaya.
Switching power supply for 912-TM himalaya transmodulateurs, which permits the installation of a PA-740 broadband amplifier and different modules on the support frame. An additional power supply can be added to the headend so that it will have a redundant power supply with load balance. Power supply with a flat cable of 10 lines at 12V.
Downloads
Technical specification
Technical specification
Manuals
FA-512 Manual pdf 2.11 MB
Catalogues
CATALOGUE_ALCAD_EN_MULTIMEDIA_TV pdf 5.42 MB
Certificates
CE Declaration – FA-512 pdf 61.42 KB
Technical specifications
-
Read moreAlcad FF-200 – Serie 904: External power supply everest 24 vdc/1a.
Power supply for Everest amplifiers, 24 V and 1 A. If the amplifier already has a built-in power supply, it can be used as a redundant power supply or as a spare power supply. If the amplifier does not have a built-in power supply, it is used as a spare power supply. EU plug.
Downloads
Technical specification
Technical specification
Catalogues
CATALOGUE_ALCAD_EN_MULTIMEDIA_TV pdf 5.42 MB
Certificates
CE Declaration – FF-200 pdf 61.41 KB
Technical specifications
-
Read moreAlcad FF-300 – Serie 904: K2 external power supply 24 vdc/ 250 ma.
External power supply for K2 amplifiers. Even though it is included with the amplifiers, it is also sold sepparately as a spare part, to be used for maintainance or repairs.
Provides up to 250 mA at 24V.
Downloads
Technical specification
Technical specification
Catalogues
CATALOGUE_ALCAD_EN_MULTIMEDIA_TV pdf 5.42 MB
Certificates
CE Declaration – FF-300 pdf 61.35 KB
Technical specifications
-
Alcad FR-900 Lte700 c48, reject filter 60 db
KSh5,808.00Add to cartAlcad FR-900 – Serie 902: Lte700 c48, reject filter 60 db.
Rejection filter for mast, cutting out interference from LTE700, LTE800, GSM and TETRA mobile phone signals. It incorporates a DC path to allow power to be supplied to a preamplifier.
Applications
Suitable for individual and collective terrestrial TV installations affected by the transmission of LTE700 and LTE800 mobile phone signals in the 703-862 MHz band, and by the transmission of GSM and TETRA signals in the 870-960 MHz band. The filter eliminates interference signals before amplification of the TV signals in the head-end of the installation, obtaining a rejection in the LTE700 and LTE800 band of up to -60dB.
Characteristics
Shielded zamak chassis, covered by a weather-resistant plastic casing. Easy to open and close, the chassis can be tilted to facilitate manipulation. The filter can be installed either on a mast, by means of a polyamide clamp, or on a wall. Resistant to sun and water (IP53). F-type connector.
Downloads
Technical specification
Technical specification
Manuals
– pdf 167.07 KB
Catalogues
CATALOGUE_ALCAD_EN_MULTIMEDIA_TV pdf 5.42 MB
Certificates
CE_Declaration-TV_Systems pdf 65.95 KB
-
Read moreAlcad IM-123 – Serie 909: Current injector 24 vdc 905-zg/zp.
Power injector for preamplifiers, fed from the power supply unit of the equipment via a Faston connector.
Downloads
Technical specification
Technical specification
Catalogues
CATALOGUE_ALCAD_EN_MULTIMEDIA_TV pdf 5.42 MB
Technical specifications
-
Read moreAlcad LS-207 – Serie 912: Flat power cable of 20 lines.
Flat power cable of 20 lines, to connect the power 9120105 supply and 11 modules.
Downloads
Technical specification
Technical specification
Catalogues
CATALOGUE_ALCAD_EN_MULTIMEDIA_TV pdf 5.42 MB
Technical specifications
-
Alcad LT-102 Power cable faston to 10 pin male
KSh1,210.00Add to cartAlcad LT-102 – Serie 905: Power cable faston to 10 pin male.
Faston connector adaptor to 10-pin male connector, for adding modules with F-type connectors to the end of equipment with IEC connectors. An LT-107 power supply cable is also required.
Downloads
Technical specification
Technical specification
Catalogues
CATALOGUE_ALCAD_EN_MULTIMEDIA_TV pdf 5.42 MB
Technical specifications
-
Alcad LT-107 10 lines power flat cable
KSh4,610.00Add to cartAlcad LT-107 – Serie 905: 10 lines power flat cable.
Ribbon power cable with 10-pin connectors for 1 power supply unit, 18 modules and control module.
Downloads
Technical specification
Technical specification
Catalogues
CATALOGUE_ALCAD_EN_MULTIMEDIA_TV pdf 5.42 MB
Technical specifications
-
Add to cartAlcad LT-112 – Serie 905: Power cable faston 10 pin female.
Double faston connector adaptor to 10-pin female connector, for replacing a module with an IEC connector with a module with an F-type connector.
Downloads
Technical specification
Technical specification
Catalogues
CATALOGUE_ALCAD_EN_MULTIMEDIA_TV pdf 5.42 MB
Technical specifications
-
Read moreAlcad MD-104 – Serie 909: Indct.mix/split. (2 outputs).
Two input multiplexer to connect to the input of a video. It can be used as a two input splitter. Female IEC input connector and male IEC output connector to connect to the equipment.
Downloads
Technical specification
Technical specification
Catalogues
CATALOGUE_ALCAD_EN_MULTIMEDIA_TV pdf 5.42 MB
Technical specifications
-
Alcad MD-310 Multistandard biii modulator
KSh17,770.00Add to cartAlcad MD-310 – Serie 951: Multistandard biii modulator.
TV modulator with mono audio, which generates an analogue TV channel from the audio and video signals. The generated channel is mixed with the rest of the channels of the TV installation. Available in different bands, with different standards and channel tables.
Applications
It modulates the audio and video signal of a satellite receiver, DVD, video or surveillance camera, in order to distribute it in the TV installation of the house. The audio and video signals are obtained from the scart connector of the video.
Characteristics
The output channel can be selected by means of switches. Essential features of this equipment are the high carrier to noise ratio together with a very reduced spurious level in the band. Modulation in DSB double side band. F type connector and RCA connector for audio/ video.
Downloads
Technical specification
Technical specification
Manuals
– pdf 715.87 KB
Catalogues
CATALOGUE_ALCAD_EN_MULTIMEDIA_TV pdf 5.42 MB
Certificates
CE_Declaration-TV_Systems pdf 65.95 KB
Technical specifications
-
Alcad MD-410 Multistandard uhf modulator
KSh17,770.00Add to cartAlcad MD-410 – Serie 951: Multistandard uhf modulator.
TV modulator with mono audio, which generates an analogue TV channel from the audio and video signals. The generated channel is mixed with the rest of the channels of the TV installation. Available in different bands, with different standards and channel tables.
Applications
It modulates the audio and video signal of a satellite receiver, DVD, video or surveillance camera, in order to distribute it in the TV installation of the house. The audio and video signals are obtained from the scart connector of the video.
Characteristics
The output channel can be selected by means of switches. Essential features of this equipment are the high carrier to noise ratio together with a very reduced spurious level in the band. Modulation in DSB double side band. F type connector and RCA connector for audio/ video.
Downloads
Technical specification
Technical specification
Manuals
– pdf 715.87 KB
Catalogues
CATALOGUE_ALCAD_EN_MULTIMEDIA_TV pdf 5.42 MB
Certificates
CE_Declaration-TV_Systems pdf 65.95 KB
Technical specifications
-
Alcad MD-531 Modulator wideband bg standard stereo
KSh20,820.00Add to cartAlcad MD-531 – Serie 951: Modulator wideband bg standard stereo.
TV modulator with stereo audio, which generates an analogue TV channel from the audio and video signals. The generated channel is mixed with the rest of the channels of the TV installation. It modulates the output channel for any channel of the terrestrial band based on the the B/G CCIR standard.
Applications
It modulates the audio and video signal of a satellite receiver, DVD, video or surveillance camera, in order to distribute it in the TV installation of the house. The audio and video signals are obtained from the scart connector of the video.
Characteristics
The output channel can be selected by means of switches. Essential features of this equipment are the high carrier to noise ratio together with a very reduced spurious level in the band. Modulation in DSB double side band. F type connector and RCA connector for audio/ video.
Downloads
Technical specification
Technical specification
Manuals
– pdf 243.71 KB
Catalogues
CATALOGUE_ALCAD_EN_MULTIMEDIA_TV pdf 5.42 MB
Certificates
CE_Declaration-TV_Systems pdf 65.95 KB
Technical specifications
-
Add to cartAlcad ME-213 – Serie 902: Double multiplexer tv-sat for indoor use.
Double multiplexer that combines the terrestrial TV and FM radio signals with two separate satellite IF signal from two LNBs. The two resulting signals are distributed each one a single coaxial cable. It can be also used as a diplexer for terrestrial TV and satellite IF signals coming from a single cable. SIngle and double multiplexer
Applications
Designed for TV installations with two coaxial cables in which distribution to the dwellings is performed with two coaxial cables. SMATV satellite and terrestrial TV installations. It is used to combine the signals after amplifying at the head of the installation, or it is used as a separator to distribute terrestrial and satellite TV signals to different points.
Characteristics
Shielded zamak chassis and type F connectors. DC Path to the SAT input to power and switch the LNB.
Accessories
9120039 CM-004 F male connector for coaxial ?6.6 mm. 9080023 MC-302 F male connector for coaxial ?7.0 mm.
Downloads
Technical specification
Technical specification
Manuals
– pdf 166.76 KB
Catalogues
CATALOGUE_ALCAD_EN_MULTIMEDIA_TV pdf 5.42 MB
Certificates
CE_Declaration-TV_Systems pdf 65.95 KB
Technical specifications
-
Alcad ME-214 Multiplexer 2 inputs, tv-sat
KSh3,920.00Add to cartAlcad ME-214 – Serie 902: Multiplexer 2 inputs, tv-sat.
Multiplexer that combines the terrestrial TV and FM radio signals with the satellite IF signal from the LNB. The resulting signal is distributed by a single coaxial cable. It can be also used as a separator for terrestrial TV and satellite IF signals coming from a single cable.
Applications
Satellite and terrestrial TV installations of collective type. It is used to combine the signals after amplifying at the head of the installation, or it is used as a separator to distribute terrestrial and satellite TV signals to different points.
Characteristics
Shielded zamak chassis and type F connectors. DC Path to the SAT input to power and switch the LNB.
Accessories
9120039 CM-004 F male connector for coaxial ?6.6 mm. 9080023 MC-302 F male connector for coaxial ?7.0 mm.
Downloads
Technical specification
Technical specification
Manuals
– pdf 166.76 KB
Catalogues
CATALOGUE_ALCAD_EN_MULTIMEDIA_TV pdf 5.42 MB
Certificates
CE_Declaration-TV_Systems pdf 65.95 KB
Technical specifications
-
Alcad MM-200 Multiplexer tv/fm-tv/fm mast
KSh4,090.00Add to cartAlcad MM-200 – Serie 902: Multiplexer tv/fm-tv/fm mast.
2 input multiplexer which can be used as a 2 output terrestrial TV splitter, for mast installation (see page 44).
Downloads
Technical specification
Technical specification
Manuals
– pdf 126.41 KB
Catalogues
CATALOGUE_ALCAD_EN_MULTIMEDIA_TV pdf 5.42 MB
Certificates
CE Declaration of Conformity – MM-200 pdf 64.01 KB
Technical specifications
-
Alcad MM-207 Multiplexer uhf-vhf/fm mast
KSh2,820.00Add to cartAlcad MM-207 – Serie 902: Multiplexer uhf-vhf/fm mast.
Multiplexers for masts, universal or by bands, of two inputs. They mix the signals from several antennas in a single coaxial cable. They incorporate switchable DC paths to permit the feeding of a preamplifier.
Applications
Individual digital and analogue terrestrial TV installations. In installations where the reception levels are adequate (60 to 75 dB?V) the signals of all the antennas can be combined to distribute them in the building with a single coaxial cable.
Characteristics
Shielded zamak chassis, covered by an ABS plastic box for outdoor use. Fixed to the mast by means of a polyamide clamp. F-type connectors. Supplied in individual or multiple packs.
Accessories
9120039 CM-004 Male F connector for ?6.6mm coaxial. 9080023 MC-302 Male F connector for RG-6 coaxial, ?7.0 mm
Downloads
Technical specification
Technical specification
Manuals
– pdf 126.41 KB
Catalogues
CATALOGUE_ALCAD_EN_MULTIMEDIA_TV pdf 5.42 MB
Certificates
CE Declaration of Conformity – MM-207 pdf 64.01 KB
Technical specifications
-
Alcad MM-214 Multiplexer/splitter tv-sat
KSh5,372.00Add to cartAlcad MM-214 – Serie 902: Multiplexer/splitter tv-sat.
Multiplexers for masts which combine the signals of terrestrial TV and FM radio with the IF satellite signal from the LNB. The resulting signal is distributed by a single coaxial cable.
Applications
Individual or SMATV installations. The mast multiplexer enables the distribution of the satellite signal to the interior of the building when it is not possible to add a new cable for the satellite.
Characteristics
Shielded zamak chassis, covered by an ABS plastic box for outdoor use. Fixed to the mast by means of a polyamide clamp. F-type connectors. Supplied in individual or multiple packs.
Accessories
9120039 CM-004 Male F connector for ?6.6mm coaxial. 9080023 MC-302 Male F connector for RG-6 coaxial, ?7.0 mm
Downloads
Technical specification
Technical specification
Manuals
– pdf 166.76 KB
Catalogues
CATALOGUE_ALCAD_EN_MULTIMEDIA_TV pdf 5.42 MB
Certificates
CE Declaration of Conformity – MM-214 pdf 64.01 KB
Technical specifications
-
Add to cartAlcad MM-303 – Serie 902: Multiplexer 3 inp, uhf-biii-fm with dc.
Multiplexers for masts, or by bands, of three inputs. They mix the signals from several antennas in a single coaxial cable.
Applications
Individual digital and analogue terrestrial TV installations. In installations where the reception levels are adequate (60 to 75 dB?V) the signals of all the antennas can be combined to distribute them in the building with a single coaxial cable.
Characteristics
Shielded zamak chassis, covered by an ABS plastic box for outdoor use. Fixed to the mast by means of a polyamide clamp. F-type connectors. Supplied in individual or multiple packs.
Accessories
9120039 CM-004 Male F connector for ?6.6mm coaxial. 9080023 MC-302 Male F connector for RG-6 coaxial, ?7.0 mm.
Downloads
Technical specification
Technical specification
Manuals
– pdf 126.41 KB
Catalogues
CATALOGUE_ALCAD_EN_MULTIMEDIA_TV pdf 5.42 MB
Certificates
CE Declaration of Conformity – MM-303 pdf 64.01 KB
Technical specifications
-
Alcad MM-307 Multiplexer uhf-uhf-vhf/fm mast
KSh3,618.00Add to cartAlcad MM-307 – Serie 902: Multiplexer uhf-uhf-vhf/fm mast.
Multiplexers for masts, or by bands, of three inputs. They mix the signals from several antennas in a single coaxial cable.
Applications
Individual digital and analogue terrestrial TV installations. In installations where the reception levels are adequate (60 to 75 dB?V) the signals of all the antennas can be combined to distribute them in the building with a single coaxial cable.
Characteristics
Shielded zamak chassis, covered by an ABS plastic box for outdoor use. Fixed to the mast by means of a polyamide clamp. F-type connectors. Supplied in individual or multiple packs.
Accessories
9120039 CM-004 Male F connector for ?6.6mm coaxial. 9080023 MC-302 Male F connector for RG-6 coaxial, ?7.0 mm.
Downloads
Technical specification
Technical specification
Manuals
– pdf 126.41 KB
Catalogues
CATALOGUE_ALCAD_EN_MULTIMEDIA_TV pdf 5.42 MB
Certificates
CE Declaration of Conformity – MM-307 pdf 64.01 KB
Technical specifications
-
Alcad PA-740 Broadband amplifier himalaya
KSh45,026.00Add to cartAlcad PA-740 – Serie 912: Broadband amplifier himalaya.
Broadband amplifier for 912-TM himalaya transmodulators. It has one input to amplify the signal coming from all the modules of the installation, and a mutliplexing input for the rest of the channels of the installation. The output level can be controlled by means of an attenuator.
Downloads
Technical specification
Technical specification
Manuals
PA-740 Manual pdf 2.11 MB
Catalogues
CATALOGUE_ALCAD_EN_MULTIMEDIA_TV pdf 5.42 MB
Certificates
CE Declaration – PA-740 pdf 61.29 KB
Technical specifications
-
Read moreAlcad PR-200 – Serie 909: 14 db uhf preamplifier remote feed.
14dB UHF preampli?er, remote-fed at 24 Vdc with F type connectors.
Downloads
Technical specification
Technical specification
Catalogues
CATALOGUE_ALCAD_EN_MULTIMEDIA_TV pdf 5.42 MB
Technical specifications
-
Read moreAlcad PR-201 – Serie 909: 14 db uhf preamplifier.
14 dB UHF preamplifier, with Faston connector to be powered at 24Vdc.
Downloads
Technical specification
Technical specification
Catalogues
CATALOGUE_ALCAD_EN_MULTIMEDIA_TV pdf 5.42 MB
Technical specifications
-
Read moreAlcad PR-310 – Serie 909: Preamplifier 5-2400 mhz 10 db.
10dB 5-2400MHz preampli?er with dc path, remote-fed at 13/18Vdc with F type connectors.
Downloads
Technical specification
Technical specification
Catalogues
CATALOGUE_ALCAD_EN_MULTIMEDIA_TV pdf 5.42 MB
Technical specifications
-
Alcad PZ-010 Fast ”f” connector plug bridge
KSh1,028.00Add to cartAlcad PZ-010 – Serie 905: Fast ”f” connector plug bridge.
Multiplexing and diplexing bridge with high-speed male F-type connector, to combine the signal of the modules or for the distribution of the signal from one antenna to several modules. For equipment with prototype connector.
Downloads
Technical specification
Technical specification
Catalogues
CATALOGUE_ALCAD_EN_MULTIMEDIA_TV pdf 5.42 MB
Technical specifications
-
Add to cartAlcad PZ-020 – Serie 905: ”f” male iec ?9,52mm plug bridge.
Multiplexing and diplexing bridge with F-type male connector and IEC male ?9.52 mm connector for combining signals from all modules or for distributing the signal from one antenna to several modules. Can be used to add a module to or to replace a module with IEC connector using modules with F-type connector.
Downloads
Technical specification
Technical specification
Catalogues
CATALOGUE_ALCAD_EN_MULTIMEDIA_TV pdf 5.42 MB
Technical specifications
-
Read moreAlcad RB-900 – Serie 909: Lte700 c48 & gsm rejection filter 60 db.
Rejection filter for head-end, cutting out interference from LTE700, LTE800, GSM and TETRA mobile phone signals. It incorporates a DC path to allow power to be supplied to a preamplifier.
Applications
Suitable for individual and collective terrestrial TV installations which are affected by the transmission of LTE700 and LTE800 mobile phone signals in the 703-862 MHz band, and by the transmission of GSM and TETRA signals in the 870-960 MHz band. The filter eliminates interference signals before amplification of the TV signals in the head-end of the installation, obtaining a rejection in the LTE700 and LTE800 band of up to -60dB.
Characteristics
Shielded zamak chassis, metal-plated, with F-type connectors. Connectors situated at opposite sides to facilitate connections. Its compact design means it can be installed in a 100 x 100 mm box.
Downloads
Technical specification
Technical specification
Manuals
– pdf 1.05 MB
Catalogues
CATALOGUE_ALCAD_EN_MULTIMEDIA_TV pdf 5.42 MB
Certificates
CE_Declaration-TV_Distribution pdf 269.31 KB
-
Alcad RM-075 Shielded load 75 ohm
KSh848.00Add to cartAlcad RM-075 – Serie 905: Shielded load 75 ohm.
75? load with shielded ?9.52 mm male IEC connector. The loads are used to close the unused outputs, avoiding the formation of standing waves which affect the levels of the channels.
Downloads
Technical specification
Technical specification
Catalogues
CATALOGUE_ALCAD_EN_MULTIMEDIA_TV pdf 5.42 MB
Technical specifications
-
Read moreAlcad RS-275 – Serie 912: 75 ohm load (for f connector).
F charge of 75 ? to charge the unused inputs 9120011 and outputs..
Downloads
Technical specification
Technical specification
Catalogues
CATALOGUE_ALCAD_EN_MULTIMEDIA_TV pdf 5.42 MB
Technical specifications
-
Add to cartAlcad SP-122 – Serie 905: Frame for power supply unit and 4 mod.
Support frame for power supply unit and 4 modules. For increasing the size of an installation or installing SAT amplifiers for the four polarities of a satellite.
Downloads
Technical specification
Technical specification
Catalogues
CATALOGUE_ALCAD_EN_MULTIMEDIA_TV pdf 5.42 MB
-
Add to cartAlcad SP-123 – Serie 905: Frame for power supply unit and 7 mod.
Support frame for power supply unit and 7 modules. Required for mounting the different modules of the equipment.
Downloads
Technical specification
Technical specification
Catalogues
CATALOGUE_ALCAD_EN_MULTIMEDIA_TV pdf 5.42 MB
-
Add to cartAlcad SP-126 – Serie 905: Frame for power supply unit and 12 mod.
Support frame for power supply unit and 12 modules. Required for mounting the different modules of the equipment.
Downloads
Technical specification
Technical specification
Manuals
– pdf 514.48 KB
Catalogues
CATALOGUE_ALCAD_EN_MULTIMEDIA_TV pdf 5.42 MB
Technical specifications
-
Alcad SP-226 Frame d38 for psu and 11 modules
KSh5,752.00Add to cartAlcad SP-226 – Serie 912: Frame d38 for psu and 11 modules.
Support frame for power supply unit, amplifier and 10 modules or power supply unit and 11 modules. Other combinations include 2 power supply units, an amplifier and 8 modules, or 2 power supply units and 9 modules. Required for mounting the different modules of the equipment.
Downloads
Technical specification
Technical specification
Manuals
– pdf 1.28 MB
Catalogues
CATALOGUE_ALCAD_EN_MULTIMEDIA_TV pdf 5.42 MB
Technical specifications
-
Read moreAlcad SP-243 – Serie 912: Frame d47 for psu and 6 modules.
Support frame for power supply unit, amplifier and 6 modules or power supply unit and 5 modules, distance 47 mm. Required for mounting the different modules of the equipment.
Downloads
Technical specification
Technical specification
Catalogues
CATALOGUE_ALCAD_EN_MULTIMEDIA_TV pdf 5.42 MB
-
Read moreAlcad SP-244 – Serie 912: Frame d47 for psu and 9 modules.
Support frame for 912-series headends. It can hold up to one power supply, one amplifier and 8 modules, or one power supply and 9 modules. There is a 47 mm distance between modules to allow for better heat disipation.
Downloads
Technical specification
Technical specification
Catalogues
CATALOGUE_ALCAD_EN_MULTIMEDIA_TV pdf 5.42 MB
-
Alcad SP-245 Frame d47 for 2 psu and 8 modules
KSh5,870.00Add to cartAlcad SP-245 – Serie 912: Frame d47 for 2 psu and 8 modules.
Support frame for 912-series headends with redundant power supplies. It can hold up to 2 power supplies, one amplifier and 7 modules, or 2 power supplies and 8 modules. There is a 47 mm distance between modules to allow for better heat disipation.
Downloads
Technical specification
Technical specification
Catalogues
CATALOGUE_ALCAD_EN_MULTIMEDIA_TV pdf 5.42 MB
-
Alcad SP-725 Frame d38 19” rack psu and 9 modules
KSh12,240.00Add to cartAlcad SP-725 – Serie 912: Frame d38 19” rack psu and 9 modules.
Support frame for 19? rack with a capacity for a power supply unit, amplifier and 8 modules or power supply unit and 9 modules. Required for mounting the different modules of the equipment on a 19? rack.
Downloads
Technical specification
Technical specification
Manuals
– pdf 133.23 KB
Catalogues
CATALOGUE_ALCAD_EN_MULTIMEDIA_TV pdf 5.42 MB
Technical specifications
-
Alcad SP-743 Frame d47 19 rack psu and 7 modules
KSh12,240.00Add to cartAlcad SP-743 – Serie 912: Frame d47 19 rack psu and 7 modules.
Support frame for 19? rack with a capacity for a power supply unit, amplifier and 8 modules or power supply unit and 7 modules, distance 47 mm. Required for mounting the different modules of the equipment on a 19? rack.
Downloads
Technical specification
Technical specification
Manuals
– pdf 133.23 KB
Catalogues
CATALOGUE_ALCAD_EN_MULTIMEDIA_TV pdf 5.42 MB
-
Alcad TM-101 Dvb-s/s2/t/t2 to t/c transmod himalaya
KSh148,750.00Add to cartAlcad TM-101 – Serie 912: Dvb-s/s2/t/t2 to t/c transmod himalaya.
himalaya transmodulator of DVB-S/S2 satellite digital television services or DVB-T/T2 terrestrial digital television to DVB-T or DVB-C. Each module selects the services of a DVB-S/S2 satellite transponder or a DVB-T/T2 terrestrial channel and includes them in a DVB-T or DVB-C channel. Can be configured using a web browser in a computer conected via ethernet cable.
Downloads
Technical specification
Technical specification
Manuals
TM-101 Manual pdf 2.11 MB
Catalogues
CATALOGUE_ALCAD_EN_MULTIMEDIA_TV pdf 5.42 MB
Certificates
CE Declaration – 912-TM pdf 61.42 KB
Firmware
Firmware TM-101 v3.05 zip 26.33 MB
Other documents
TECHNICAL INFORMATION pdf 325.27 KB
Technical specifications
-
Alcad TM-102 2xdvb-s/s2/t/t2 to dvb-t/c transmod
KSh216,332.00Add to cartAlcad TM-102 – Serie 912: 2xdvb-s/s2/t/t2 to dvb-t/c transmod.
himalaya transmodulator of DVB-S/S2 satellite digital television services or DVB-T/T2 terrestrial digital television to DVB-T or DVB-C. Each module selects services from two DVB-S/S2 satellite transponders or DVB-T/T2 terrestrial channels and includes them in a DVB-T or DVB-C channel. Can be configured using a web browser in a computer conected via ethernet cable.
Downloads
Technical specification
Technical specification
Manuals
TM-102 Manual pdf 2.85 MB
Catalogues
CATALOGUE_ALCAD_EN_MULTIMEDIA_TV pdf 5.42 MB
Certificates
CE Declaration – 912-TM pdf 61.42 KB
Firmware
Firmware TM-102 v3.05 zip 26.52 MB
Other documents
TECHNICAL INFORMATION pdf 325.27 KB
Technical specifications
-
Alcad TM-111 Dvb-s/s2/t/t2 to t/c transm ci himalaya
KSh181,208.00Add to cartAlcad TM-111 – Serie 912: Dvb-s/s2/t/t2 to t/c transm ci himalaya.
himalaya transmodulator of DVB-S/S2 satellite digital television services or DVB-T/T2 terrestrial digital television to DVB-T or DVB-C. Each module selects the services of a DVB-S/S2 satellite transponder or a DVB-T/T2 terrestrial channel and includes them in a DVB-T or DVB-C channel.
Equipped with a Common Interface slot for insertion of the CAM and the subscriber’s card for encripted services. Can be configured using a web browser in a computer conected via ethernet cable.
Downloads
Technical specification
Technical specification
Manuals
TM-111 Manual pdf 2.11 MB
Catalogues
CATALOGUE_ALCAD_EN_MULTIMEDIA_TV pdf 5.42 MB
Certificates
CE Declaration – 912-TM pdf 61.42 KB
Firmware
Firmware TM-111 v3.06 zip 26.33 MB
Other documents
TECHNICAL INFORMATION pdf 325.27 KB
Technical specifications
-
Alcad TM-112 2xdvb-s/s2/t/t2 to dvb-t/c transmod ci
KSh259,478.00Add to cartAlcad TM-112 – Serie 912: 2xdvb-s/s2/t/t2 to dvb-t/c transmod ci.
himalaya transmodulator of DVB-S/S2 satellite digital television services or DVB-T/T2 terrestrial digital television to DVB-T or DVB-C. Each module selects services from two DVB-S/S2 satellite transponders or DVB-T/T2 terrestrial channels and includes them in a DVB-T or DVB-C channel. Can be configured using a web browser in a computer conected via ethernet cable.
Equipped with a Common Interface slot for insertion of the CAM and the subscriber’s card for encripted services. Can be configured using a web browser in a computer conected via ethernet cable.
Downloads
Technical specification
Technical specification
Manuals
TM-112 Manual pdf 2.85 MB
Catalogues
CATALOGUE_ALCAD_EN_MULTIMEDIA_TV pdf 5.42 MB
Certificates
CE Declaration – 912-TM pdf 61.42 KB
Firmware
Firmware TM-112 v3.06 zip 26.51 MB
Other documents
TECHNICAL INFORMATION pdf 325.27 KB
Technical specifications
-
Alcad TM-202 2xdvb-s/s2/t/t2 to 2xdvb-t/c transmod
KSh251,678.00Add to cartAlcad TM-202 – Serie 912: 2xdvb-s/s2/t/t2 to 2xdvb-t/c transmod.
himalaya transmodulator of DVB-S/S2 satellite digital television services or DVB-T/T2 terrestrial digital television to DVB-T or DVB-C. Each module selects services from two DVB-S/S2 satellite transponders or DVB-T/T2 terrestrial channels and includes them in one or two DVB-T or DVB-C channels. Can be configured using a web browser in a computer conected via ethernet cable.
Downloads
Technical specification
Technical specification
Manuals
TM-202 Manual pdf 2.85 MB
Catalogues
CATALOGUE_ALCAD_EN_MULTIMEDIA_TV pdf 5.42 MB
Certificates
CE Declaration – 912-TM pdf 61.42 KB
Firmware
Firmware TM-202 v3.05 zip 26.62 MB
Other documents
TECHNICAL INFORMATION pdf 325.27 KB
Technical specifications
-
Alcad TMS-204 4xdvb-s/s2/s2x to 2xdvb-t/c transmod
KSh272,218.00Add to cartAlcad TMS-204 – Serie 912: 4xdvb-s/s2/s2x to 2xdvb-t/c transmod.
Himalaya transmodulator of DVB-S/S2 satellite digital television services to DVB-T or DVB-C. Each module selects services from four DVB-S/S2 satellite transponders and includes them in two DVB-T or DVB-C channels. The demodulators are Multistream compatible. Can be configured using a web browser in a computer conected via ethernet cable.
Downloads
Technical specification
Technical specification
Manuals
TMS-204 HN pdf 808.48 KB
TMS-204 Manual pdf 3.79 MB
Catalogues
CATALOGUE_ALCAD_EN_MULTIMEDIA_TV pdf 5.42 MB
Certificates
CE Declaration – TMS-204 TMS-214 pdf 70.78 KB
Firmware
Firmware TMS-204 v1.06 zip 28.44 MB
Other documents
TECHNICAL INFORMATION pdf 325.27 KB
Technical specifications
-
Alcad TMS-214 4xdvb-s/s2/s2x to 2xdvb-t/c transmod, ci
KSh313,306.00Add to cartAlcad TMS-214 – Serie 912: 4xdvb-s/s2/s2x to 2xdvb-t/c transmod, ci.
Himalaya transmodulator of DVB-S/S2 satellite digital television services to DVB-T or DVB-C. Each module selects services from four DVB-S/S2 satellite transponders and includes them in two DVB-T or DVB-C channels. The demodulators are Multistream compatible. Can be configured using a web browser in a computer conected via ethernet cable.
Equipped with a Common Interface slot for insertion of the CAM and the subscriber’s card for encripted services.
Downloads
Technical specification
Technical specification
Manuals
TMS-214 HN pdf 808.48 KB
TMS-214 Manual pdf 3.79 MB
Catalogues
CATALOGUE_ALCAD_EN_MULTIMEDIA_TV pdf 5.42 MB
Certificates
CE Declaration – TMS-204 TMS-214 pdf 70.78 KB
Firmware
Firmware TMS-214 v1.07 zip 28.46 MB
Other documents
TECHNICAL INFORMATION pdf 325.27 KB
Technical specifications
-
Alcad VE-500 Fan for cabinet 230 vac
KSh6,216.00Add to cartAlcad VE-500 – Serie 905: Fan for cabinet 230 vac.
Ventilator for CP-710 cabinet – this may be required in warm environments to keep the equipment within its operating temperature margins.
Downloads
Technical specification
Technical specification
Manuals
– pdf 267.27 KB
– pdf 1.28 MB
Catalogues
CATALOGUE_ALCAD_EN_MULTIMEDIA_TV pdf 5.42 MB
Technical specifications
-
Alcad ZF-712 If amplifier, 0/13/18 vdc, 0/22 khz
KSh21,894.00Add to cartAlcad ZF-712 – Serie 905: If amplifier, 0/13/18 vdc, 0/22 khz.
IF broadband amplifier for one polarity which amplifies the IF band from an LNB and mixes the terrestrial TV signal coming from the rest of the equipment. It feeds the LNB with the power voltage and 22 KHz signal required to obtain the desired polarity.
Applications
SMATV installations requiring the distribution of one satellite polarity together with the rest of the terrestrial TV channels. The distribution is made in the terrestrial TV band and the satellite IF band. Especially appropriate for bouquets which have all their transponders in a singe polarity.
Characteristics
This module is compatible with the rest of the range of 905-ZG TV equipment. It allows the distribution of the terrestrial TV and satellite signals in a unified form from a single piece of equipment.
Downloads
Technical specification
Technical specification
Manuals
– pdf 327.17 KB
– pdf 486.69 KB
Catalogues
CATALOGUE_ALCAD_EN_MULTIMEDIA_TV pdf 5.42 MB
Certificates
CE Declaration – ZF-712 pdf 68.66 KB
Technical specifications
-
Alcad ZG-211 Bii(fm) broadband amplifier, 53 db
KSh13,188.00Add to cartAlcad ZG-211 – Serie 905: Bii(fm) broadband amplifier, g=53 db.
Analogue FM and DAB radio broadband amplifier which amplifies the entire FM or DAB radio band. Amplifies the whole FM or DAB radio band. High gain and output level. The ZG-611 amplifier amplifies the DAB digital radio by groups of channels (which should be specified when ordering). The FM amplifier is also available for OIRT frequencies (when ordering model ZG-611, please specify FM OIRT if required).
Applications
MATV installations that include FM or DAB radio distribution.
Characteristics
This module is compatible with other equipment for TV in the 905- ZG range. It allows distribution of FM and DAB radio and of television signals to be combined using a single piece of equipment. Attenuator by means of active MOSMIC regulator to reduce the noise figure. 30dB multiturn attenuator. Switch to supply power to preamplifiers with protection against short circuits.
Downloads
Technical specification
Technical specification
Manuals
– pdf 201.67 KB
Catalogues
CATALOGUE_ALCAD_EN_MULTIMEDIA_TV pdf 5.42 MB
Certificates
CE Declaration – ZG-211 pdf 68.66 KB
Technical specifications
-
Alcad ZG-212 Radio amplifier dab, 50 db
KSh15,678.00Add to cartAlcad ZG-212 – Serie 905: Radio amplifier dab, g= 50 db.
Analogue FM and DAB radio broadband amplifier which amplifies the entire FM or DAB radio band. Amplifies the whole FM or DAB radio band. High gain and output level. The ZG-611 amplifier amplifies the DAB digital radio by groups of channels (which should be specified when ordering). The FM amplifier is also available for OIRT frequencies (when ordering model ZG-611, please specify FM OIRT if required).
Applications
MATV installations that include FM or DAB radio distribution.
Characteristics
This module is compatible with other equipment for TV in the 905- ZG range. It allows distribution of FM and DAB radio and of television signals to be combined using a single piece of equipment. Attenuator by means of active MOSMIC regulator to reduce the noise figure. 30dB multiturn attenuator. Switch to supply power to preamplifiers with protection against short circuits.
Downloads
Technical specification
Technical specification
Manuals
– pdf 201.67 KB
Catalogues
CATALOGUE_ALCAD_EN_MULTIMEDIA_TV pdf 5.42 MB
Certificates
CE Declaration – ZG-212 pdf 68.66 KB
Technical specifications
-
Alcad ZG-402 Two channel amplifier
KSh21,666.00Add to cartAlcad ZG-402 – Serie 905: Two channel amplifier.
Multichannel amplifier for the UHF band designed to work with a group of adjacent channels. Each module permits the amplification and equalisation of two to four channels. The level of the group of channels can be adjusted but not each channel independently. High gain and output level. The initial channel of the group should be specified in the order.
Applications
Large digital and analogue terrestrial MATV installations where adjacent analogue or digital channels exist. Recommended for use in areas of reception where the relation in levels between analogue and digital channels is constant. Normally used to amplify one analogue channel along with several digital channels.
Characteristics
Each module consists of a three-stage input filter, an amplifier and an output filter which is three-stage, the filters are cavities. Filters remain highly stable with variations in temperature. Attenuator using an active MOSMIC regulator reduces the noise figure. 20dB multiturn attenuator. Switch to supply power to preamplifiers with protection against short circuits.
Downloads
Technical specification
Technical specification
Manuals
Manual pdf 261.76 KB
Catalogues
CATALOGUE_ALCAD_EN_MULTIMEDIA_TV pdf 5.42 MB
Certificates
CE Declaration ZG-402 pdf 48.63 KB
-
Alcad ZG-412 Two channel amplifier uhf, 53 db
KSh21,252.00Add to cartAlcad ZG-412 – Serie 905: Two channel amplifier uhf, g=53 db.
Multichannel amplifier for the UHF band designed to work with a group of adjacent channels. Each module permits the amplification and equalisation of two to four channels. The level of the group of channels can be adjusted but not each channel independently. High gain and output level. The initial channel of the group should be specified in the order.
Applications
Large digital and analogue terrestrial MATV installations where adjacent analogue or digital channels exist. Recommended for use in areas of reception where the relation in levels between analogue and digital channels is constant. Normally used to amplify one analogue channel along with several digital channels.
Characteristics
Each module consists of a three-stage input filter, an amplifier and an output filter which is three-stage, the filters are cavities. Filters remain highly stable with variations in temperature. Attenuator using an active MOSMIC regulator reduces the noise figure. 30dB multiturn attenuator. Switch to supply power to preamplifiers with protection against short circuits.
Downloads
Technical specification
Technical specification
Manuals
Manual pdf 204.95 KB
Catalogues
CATALOGUE_ALCAD_EN_MULTIMEDIA_TV pdf 5.42 MB
Certificates
CE Declaration ZG-412 pdf 48.63 KB
Technical specifications
-
Alcad ZG-413 Three channel amplifier uhf, 53 db
KSh21,252.00Add to cartAlcad ZG-413 – Serie 905: Three channel amplifier uhf, g=53 db.
Multichannel amplifier for the UHF band designed to work with a group of adjacent channels. Each module permits the amplification and equalisation of two to four channels. The level of the group of channels can be adjusted but not each channel independently. High gain and output level. The initial channel of the group should be specified in the order.
Applications
Large digital and analogue terrestrial MATV installations where adjacent analogue or digital channels exist. Recommended for use in areas of reception where the relation in levels between analogue and digital channels is constant. Normally used to amplify one analogue channel along with several digital channels.
Characteristics
Each module consists of a three-stage input filter, an amplifier and an output filter which is three-stage, the filters are cavities. Filters remain highly stable with variations in temperature. Attenuator using an active MOSMIC regulator reduces the noise figure. 30dB multiturn attenuator. Switch to supply power to preamplifiers with protection against short circuits.
Downloads
Technical specification
Technical specification
Manuals
Manual pdf 204.95 KB
Catalogues
CATALOGUE_ALCAD_EN_MULTIMEDIA_TV pdf 5.42 MB
Certificates
CE Declaration ZG-413 pdf 48.63 KB
Technical specifications
Popular Products
-
Dual Monitor Arm for 13-32 inch Screens up to 19.8 lbs Each - Monitor Mounts for 2 Monitors - Dual Computer Monitor Stand for Desk VESA 75x75 100x100 Adjustable Gas Spring Desk Mount Black
-
Dual Monitor Arm White for 13-32 inch Screens up to 19.8 lbs Each - Monitor Mounts for 2 Monitors - Dual Computer Monitor Stand for Desk VESA 75x75 100x100 Adjustable Gas Spring Desk Mount
-
Single Monitor Desk Mount for 13-34 inch Flat/Curved Screens up to 26.5 lbs - Adjustable Monitor Stand Full Motion Gas Spring Monitor Arm Single Monitor Mount Ultrawide Monitor Arm Black
-
ONKRON Dual Monitor Arm Desk Mount for Two 13-32 Inch Monitors up to 19 lbs Each - Gas Spring Monitor Arm Mount, VESA 75x75-100x100, Dual Monitor Stand for Desk/Dual Monitor Mount Desk Black
-
ONKRON Mobile TV Stand with Wheels Rolling TV Stand for 40-80 Inch LED LCD Flat or Curved Screen TVs up to 122 lbs - Height Adjustable TV Cart with Shelves - Portable TV Stand (TS2771) Black
Products
-
Dual Monitor Arm for 13-32 inch Screens up to 19.8 lbs Each - Monitor Mounts for 2 Monitors - Dual Computer Monitor Stand for Desk VESA 75x75 100x100 Adjustable Gas Spring Desk Mount Black
-
Dual Monitor Arm White for 13-32 inch Screens up to 19.8 lbs Each - Monitor Mounts for 2 Monitors - Dual Computer Monitor Stand for Desk VESA 75x75 100x100 Adjustable Gas Spring Desk Mount
-
Single Monitor Desk Mount for 13-34 inch Flat/Curved Screens up to 26.5 lbs - Adjustable Monitor Stand Full Motion Gas Spring Monitor Arm Single Monitor Mount Ultrawide Monitor Arm Black
-
ONKRON Dual Monitor Arm Desk Mount for Two 13-32 Inch Monitors up to 19 lbs Each - Gas Spring Monitor Arm Mount, VESA 75x75-100x100, Dual Monitor Stand for Desk/Dual Monitor Mount Desk Black
-
ONKRON Mobile TV Stand with Wheels Rolling TV Stand for 40-80 Inch LED LCD Flat or Curved Screen TVs up to 122 lbs - Height Adjustable TV Cart with Shelves - Portable TV Stand (TS2771) Black