Category: Uncategorized
Uncategorized
Showing 1–80 of 656 results
-
Read more“F” Domestic Amplifier 3 Outputs (2+TV): VHF/UHF – Auto LTE
Specifications:
3 outputs (2+TV) with automatic level adjustment
TV output provides lower gain for direct TV connection
Equipped with selectable LTE filtering
Input power supply for pre-amplifier or BOSS system
Plug & Play with automatic gain regulation
Compact and low-impact design
Wall-mountable using screws
Uses ‘F’ connectors
Tags:
TV Amplifier
LTE Filter
Domestic Amplifier
Auto Gain
VHF UHF
? Order on WhatsApp -
Add to cart1.5 INCH PIPE STARLINK MOUNT: Perfectly
matches the existing 1.5inch pipe flagpole, including the first and second
generation saucer plate support pole, save your equipment replacement.
STURDY PETG MATERIAL: Printed and manufactured using weather resistant
tough petg material, has been made with a 15deg tilt design to ensure your
dish tilts rain and clears snowstorms.
EASY TO USE: The use of a bike quick release pipe latch on the bottom makes
it possible to use this pipe style starlink gen 3 pipe adapter without
borrowing external tools. Equipped with rubber tabs for increased
friction
INTELLIGENT DESIGN OPENING: The Pipeline Flagpole starlink pole mount gen 3
has an ingenious opening in the center of the adapter that is 4cm long/4mm
wide, which you can also use a pin to insert to hold the pipe in place and
turn it.
NEVER RUST: Compared to metal, plastic products are more adaptable to
working in rainy and wet environments, and will last longer. -
Add to cart100Mpbs Wifi Bridge: 100Mbps digital
display bridge, transmission/ receiver automatic networking, supports
point-to-point, point-to-multipoint transmission/ receiver flexible
switching. WDS networking mode, video network dual compatible. Deep protocol
optimization for wireless video surveillance and the underlying wireless
driver is optimized in-depth, with stronger anti-interference ability and
better stability.
3KM/ 1.8Miles Transmission Distance: High gain 14 dBi intergrated
directional antennas built into the WiFi bridge extend networks up to 3 KM/
1.8 Miles long range. The actual application transmission distance should be
less than 3KM/ 1.8Miles( Barrier-Free). A few trees will not block the
transmission speed of a point-to-point internet outdoor CPE.
Building to Building Extend the Network: You can extend your home’s network
to your garage, barn, store, warehouse, farm, etc. with the wireless bridge.
No trenching and wiring is required for wireless connection, -
Read more1080P HD Mini Body Camera With Audio And Video Recording – Portable Wearable Recorder With Night Vision, Clip-On Design, 180? Rotatable Lens
Specifications:
Video Resolution: 1920x1080P
Lens Angle: 90? Wide-Angle
Lens Rotation: 180? Adjustable
Video Format: AVI
Audio Format: WAV 512kbps
Storage: Supports up to 128GB TF Card
Battery: 3.7V 500mAh Lithium, up to 3 hours recording
Night Vision: Yes, manually controlled
Interface: USB 2.0 High Speed
Design: Clip-On for portable use
Weight: 23g
Dimensions: 7.9 x 2.6 x 11.5 cm
Playback: Compatible with mainstream video players
Tags:
Body Camera
Portable Recorder
Wearable Cam
Night Vision Camera
Mini Security Camera
? Order on WhatsApp -
Read more12 Channel Console | Powered Mixer
Specifications:
Model Number — MX12
Product Name — Mixer Audio
Type — DJ Mixing Console
Function — Mobile Outdoor Party Speaker
Function — Mobile Outdoor Party Speaker
Single package size — 65X40X10 cm
Single gross weight — 15.000 kg
Tags:
conference
microphone system
audio equipment
meeting conference
? Order on WhatsApp -
Read more12 Channel Console Mixing 99 Dsp Effects Powered Mixer With Amplifier
Specifications:
brand name — FANGWU
model number — PHY-12DUSB
power — 350w
frequency range (hz) — 18HZ-20KHZ
Application — Stage Performance
Single package size: 68X58X26 cm
Single gross weight: 17.000 kg
Tags:
conference
microphone system
audio equipment
meeting conference
? Order on WhatsApp -
120W 3-in-1 Step Up PoE Injector with Comprehensive Protection for Standard Actuated Starlink
KSh49,497.00Add to cartStep Up PoE Injector for starlink SPX
connector that does not require cable modification Hassle free starlink
battery conversion Step up power supply included Wide range of input and
output protections Integrated power switch Aluminum shell -
Add to cartInput over and under voltage protection.
Reverse polarity protection. Over-current and short-circuit protection.
Overheating protection. Working state LED indication. -
Read more12V 20A 240W 18CH Metal Box UPS CCTV Power Supply Battery Backup Function For CCTV Camera
Specifications:
Output Power — 201 – 300w
Brand Name — WB
Model Number — WB-12V
Output Type — Single Phase
Output Frequency — 50-60Hz
Output Current — 20A
Product Name — cctv power backup
Output — 12V 20A
Tags:
Metal Box
Power Supply
? Order on WhatsApp -
Add to cart12V to 48V DC Step UP ConverterInput: DC
12V(9V – 16V) ,Output voltage: 48V DC ,Line output current: 6A 288W Upgrade
Synchronous Rectification TechnologyEfficient Conversion, The conversion
efficiency is as high as 96%.this upgrade make our Power Supply Converter
Regulator widely used on Bus, CMB, large trucks, motor, GPS navigation, solar
power, photovoltaic energy, bus display, taxi advertising screen, car audio,
LCD TV, LED, intercom and monitoring system.NOTE: NOT for Starlink series
IP68 Waterproof GradeDesigned with aluminum shell and silicone sealed,
Excellent waterproof, dustproof, explosion-proof, shock-resistant properties
and adapt to a variety of harsh environment. SMT ProcessFR-4 Multilayer
lines, resistors, capacitors and switch MOS tube are SMD components with high
integration, high reliability, high stability. Secure Your DevicesDC Step UP
Converter Built-in smart chips, offering over/under voltage input, overload,
overhead, and short circuit -
Add to cartAdjustable Starlink Mounting Kit –
Optimize Signal Strength with Long Wall Mount and Roof Mount – Compatible
with V2 Starlink Internet Kit
Versatile Mounting Options: Our Adjustable Starlink Mounting Kit offers a
range of options, including a 30-inch Long Wall Mount and Roof Mount,
providing flexibility for optimal positioning of your Starlink V2 Internet
Kit Satellite.
Tailored Starlink Mount Adapter: Specifically designed with a Starlink
Mount Adapter, ensuring a secure and seamless fit for your V2 Starlink
equipment.
Customizable Angles: Enjoy adjustable angles for perfect alignment and
maximum signal reception, allowing you to customize your Starlink setup for
optimal performance.
Sturdy and Durable Build: Crafted with high-quality materials, our mounting
kit ensures durability and stability, providing long-lasting support for your
Starlink equipment.
Easy Installation: The user-friendly design makes installation a breeze,
allowing you to set up your Starli -
Read more1434 Uhf Fm Indoor Home Cable Trunk Line Signal Booster Housing Catv Antenna Amplifier
Specifications:
Support — HD TV
Application — Professional Broadcast
Keyword — House Amplifier
Keyword2 — Catv Amplifier
Keyword3 — 4 otuput Television amplifier
Function — Mix Video
Single package size — 48X21X4.5 cm
Single gross weight — 2.000 kg
Tags:
signal booster
1434 Uhf
home cable
housing catv antenna
antenna amplifier
? Order on WhatsApp -
Add to cartEasily Expandable: Our Starlink extension
cable easily repairs and extends the original Starlink Rectangular Satellite
V2 75ft cable to 225ft cable, with wiring tools included so you don’t have to
purchase additional expensive 150ft Starlink cables.
Perfect Fix: If your Starlink cable is bitten badly or for other reasons
the old cable casing is cracked and exposed to wires, resulting in a very
slow internet connection and constant loss of signal, this Starlink cable
extension kit will be the perfect solution to your problem.
High Quality: The Starlink replacement cable adopts a fully shielded design
and pure copper data transmission, Which effectively isolates interference,
allowing you to complete non-destructive repairs and surf the Starlink
ethernet. Cables have a ground wire attached and will not lose any
functionality of your original cable (Note: Please follow the video
instructions to connect the ground wire).
Safe and Stable: The Starlink cable extension conn -
Add to cartEASILY EXPANDABLE: Our Starlink extension
cable easily repairs and extends the original Starlink Rectangular Satellite
V2 150ft cable with wiring tools included so you don’t have to purchase
additional expensive 150ft Starlink cables. PERFECT FIX: If your Starlink
cable is bitten badly or for other reasons the old cable casing is cracked
and exposed to wires, resulting in a very slow internet connection and
constant loss of signal, this Starlink cable extension kit will be the
perfect solution to your problem. HIGH QUALITY: The Starlink replacement
cable adopts a fully shielded design and pure copper data transmission, Which
effectively isolates interference, allowing you to complete non-destructive
repairs and surf the Starlink ethernet. Cables have a ground wire attached
and will not lose any functionality of your original cable. SAFE AND STABLE:
Starlink cable extension connector is IP68 waterproof and dustproof, Allows
you to perfectly repair Starlink Rectangular Satellite V2 Cabl -
Add to cartWeatherproof Design: Designed with IP68
waterproof technology, our cable ensures reliable performance in any weather
condition, making it ideal for outdoor use. Pure Copper Transmission: Enjoy
high-speed and efficient data transmission with our cable, featuring pure
copper construction for a robust and reliable connection. Seamless Repair
Solution: Perfect for repairing damaged cables or extending your current
setup, our kit provides a hassle-free solution to keep your Starlink
connection strong. Versatile Compatibility: Compatible with various Starlink
systems, our kit offers a versatile solution for different setups, ensuring
compatibility with your specific configuration. Easy Installation: The
user-friendly design makes installation a breeze, empowering you to quickly
enhance your Starlink system without the need for specialized tools. -
Add to cartHigh-Speed Connectivity For Star link V3
Dish: The DAQA Cable for Starlink, Seamlessly connects to Starlink Gen 3 for
uninterrupted internet performance. Durable Construction: Robust 150ft Star
link cable ensures long-lasting reliability and weather resistance. Easy
Installation: This OEM Star link Cable Designed for quick setup with Starlink
mounting kits, ideal for DIY enthusiasts. Cost-Effective Solution: Save on
high-cost original cables; perfect for outdoor use and mobility. Portable
Backup: Ideal backup cable for mobile use during outdoor activities -
-
Read more16 Way Out 5 To 2400 MHz Cable TV Splitter, Accessories
Specifications:
16-way out cable splitter, 1 input
Frequency range: 5-2400 MHz
Size: 225x47x28mm (8.86×1.85×1.10 inch)
Built-in grounding block screw
Suitable for analogue TV
Max current: 24V, 0.8A
Material: Metal
Tags:
Cable Splitter
16-Way
TV Accessories
High Frequency
Aerial
? Order on WhatsApp -
Add to cartProduct usage: The starlink magnet fixing
set can temporarily fix the starlink on the roof of the car, or fix the
starlink on the iron house roof or iron flat surface. The magnetic attraction
we chose is just right for fixing the starlink to the roof of the car without
damaging the vehicle due to too much pulling force. However, it is not
suitable for use when the vehicle is traveling at high speed, nor is it
suitable for use in hurricane weather.
Strong magnetic force: Each strong neodymium magnet has a pulling force of
44 pounds. Four magnets simultaneously fix the starlink bracket, providing a
vertical pulling force of 176 pounds, making the starlink dish more stable on
iron surfaces.
Secure installation: Starlink magnet mounting kit is made of high-quality
materials, ensuring stability and strong load-bearing capacity even in strong
winds. This guarantees stable support for starlink dish and provides optimal
security for your installation.
Product features: T -
Add to cart1, 176 Pounds of Attraction Strong
Magnetic Roof Mount for Starlink , Magnet Mounting Kit for Starlink Dish,
Each Magnet with 44 pounds Pull-force, Magnetic Mount for Starlink Internet
Kit Satellite 2. Product Usage: Four Magnet with a total suction of 176
pounds can firmly fix the 2nd Starlink to any iron object surface. You can
fix the Starlink on the top of an iron house, iron roof, or iron RV roof.
Don’t be afraid that your starlink will move in windy weather, and don’t
worry about being accidentally crushed and knocked over by other passing
vehicles when using it on the campsite ground. 3. Product Material: This
magnet set is fully compatible with the original base of Starlink 2, and the
magnet can be firmly fixed on the base. The magnet is wrapped with a rubber
protective layer, which will not damage your roof. 4.Install Firmly: The
Starlink magnet mounting kit is made from premium materials, ensuring
stability and a strong load-bearing capacity, even in heavy w -
Read morePackage Includes
1×Starlink Mini Tripod
1×Starlink Mini Tripod Adapter
About this item
?Precision Compatibility?- This tripod mount is designed specifically for the Starlink Mini dish antenna, providing a secure and stable platform for optimal performance. The aluminum alloy adapter ensures precise compatibility with the Starlink Mini’s original pipe adapter.
?Versatile Adjustability for Optimal Signal?- The tripod features three adjustable panels and a center pole, allowing for a wide range of positioning options. Users can easily adjust the height and angle of the Starlink Mini dish to achieve the best signal reception in any location.
?Lightweight and Portable Design?- This Starlink Mini tripod is incredibly lightweight, weighing only 0.9 pounds. Its compact and foldable design makes it incredibly portable and easy to carry, making it ideal for travel, camping, RVing, and other outdoor adventures.
?Precise Leveling for Accuracy?- The tripod head has a built-in bubble level. This feature allows users to easily level the Starlink Mini dish for optimal satellite alignment and signal acquisition, ensuring the best possible internet connection.
?Seamless Integration with Starlink Mini?- This tripod mount is one of the essential accessories for Starlink Mini users, particularly those who travel frequently. It provides a stable and adjustable platform for the dish, enabling reliable internet access in various locations and situations.
Spec
Part No MINI-BR2
Tripod Height
29 to 48 cm (11.4 to 18.9 inches)
Tripod Material Iron and Plastic
Tripod Mount Adapter Material Aluminum Alloy
Color Black
Compatible Starlink MINI -
Add to cartAdjustable Starlink Mounting Kit –
Optimize Signal Strength with Long Wall Mount and Roof Mount – Compatible
with V2 Starlink Internet Kit Versatile Mounting Options: Our Adjustable
Starlink Mounting Kit offers a range of options, including a 30-inch Long
Wall Mount and Roof Mount, providing flexibility for optimal positioning of
your Starlink V2 Internet Kit Satellite. Tailored Starlink Mount Adapter:
Specifically designed with a Starlink Mount Adapter, ensuring a secure and
seamless fit for your V2 Starlink equipment. Customizable Angles: Enjoy
adjustable angles for perfect alignment and maximum signal reception,
allowing you to customize your Starlink setup for optimal performance. Sturdy
and Durable Build: Crafted with high-quality materials, our mounting kit
ensures durability and stability, providing long-lasting support for your
Starlink equipment. Easy Installation: The user-friendly design makes
installation a breeze, allowing you to set up your Starli -
Read more19 Inch Internet 9U Server Rack Wall Mount DDF Waterproof Outdoor Data Center CCTV Network Cabinet Box
Specifications:
Complies with ANSI/EIA RS-310-D and ETSI standards
9U size, 19 inch rack mount
Made of SPCC cold rolled steel
Tempered glass front door
Panel thickness: 0.5 ~ 0.6mm
Installation column thickness: 0.7 ~ 0.8mm
Capacity ?50kg
Color: RAL9004 black (RAL7035 gray optional)
Surface treatment: Electrostatic Powder Coating
Waterproof design suitable for outdoor use
Application: Data Center, CCTV, Networking
Tags:
Wall Mount
Server Rack
Network Cabinet
Outdoor
CCTV
? Order on WhatsApp -
Read more19” Standard Data Center Telecom Network Cabinets Metal DDP Internet Server Rack
Specifications:
Complies with ANSI/EIA RS-310-D and ETSI standards
Dimensions: 2000*600*1000mm
Made of SPCC cold rolled steel
Tempered glass front door
Panel thickness: 0.5 ~ 0.6mm
Installation column thickness: 0.7 ~ 1.5mm
Capacity ?30kg
Color: RAL9004 black (RAL7035 gray optional)
Surface treatment: Electrostatic Powder Coating
Suitable for 19 inch indoor networking rack installations
Tags:
Server Rack
Network Cabinet
19 Inch
Telecom
Data Center
? Order on WhatsApp -
Add to cartEasy Installation: Our starlink mounts
are specifically designed to be compatible with starlink V2 Fast-fixed slots,
ensuring a easy, seamless and straightforward installation process. The sizes
are perfectly matched and come with easy-to-use mounting hardware for simple
installation on walls or roofs.
Durable Construction: Crafted from high-quality steel, our starlink wall
mount are built to withstand the elements without deformation or rusting. The
materials used are moisture-proof and durable, guaranteeing long-lasting use
in outdoor conditions.
Adjustable Design: Our brackets offer flexibility in positioning the
starlink outdoor mount for optimal signal reception, allowing for
customizable placement based on individual needs.
Compatible with Starlink V2: These Starlink Long Wall Mount are
specifically engineered to accommodate the generation 2 of Starlink antennas
with reinforced structure ensuring a perfect fit and reliable support.
Applicable Scene: The wall -
Read more200m Wireless Wifi HDMI Video Transmitter And Receiver Extender
Specifications:
Supports 1080p HD wireless HDMI transmission
Max range up to 200 meters in open space
Dual-band WiFi: 2.4GHz + 5.8GHz
Plug-and-play, no drivers or apps required
Works with PS4/5, laptops, TV boxes, DSLRs, and projectors
Ideal for home theaters, business presentations, gaming
Recommended range within 50m for wall penetration
Tags:
HDMI
Wireless
Extender
Transmitter
Receiver
Video
AV
? Order on WhatsApp -
Read more
200m Wireless Wifi HDMI Video Transmitter And Receiver Extender
Specifications:
Supports 1080p HD wireless HDMI transmission
Max range up to 200 meters in open space
Dual-band WiFi: 2.4GHz + 5.8GHz
Plug-and-play, no drivers or apps required
Works with PS4/5, laptops, TV boxes, DSLRs, and projectors
Ideal for home theaters, business presentations, gaming
Recommended range within 50m for wall penetration
Tags:
HDMI
Wireless
Extender
Transmitter
Receiver
Video
AV
? Order on WhatsApp -
Add to cartInput over and under voltage
protection.
Reverse polarity protection.
Over-current and short-circuit protection.
Overheating protection.
Working state LED indication. -
-
Read more24 Ports FTP Cat 5E/6/6A Network Patch Panel Panel Mounted 19 Inch RJ45 Network Port Ethernet
Specifications:
24 ports panel-mounted FTP patch panel
Supports Cat 5E, Cat 6, Cat 6A standards
19 inch rack mountable
Front panel connects to RJ-45 hub ports
Rear panel connects twisted pair cables
Modular design for horizontal wiring subsystem
Standards: Yard/T926, ISO/IEC11801
Available in UTP/FTP variants
Tags:
Patch Panel
FTP
Cat 6
RJ45
Network
? Order on WhatsApp -
Read more24V5A6A8A10A Power Adapter LED Light Strip Power LCD Display High-Power Equipment Dedicated (Size : 024V5A)
Specifications:
Power Adapters
Applications: multi-function equipment
Adapter cable length: 1.2
Product Certification: Contact Customer
Brand — ZCERA
Tags:
Power Adapters
24V5A6A8A10A
LED Light Strip Power LCD Display
? Order on WhatsApp -
Add to cart25inch Starlink Gen 3 Pipe Adapter, Long
Pole Mount Adapter Mounting Kit, Compatible with STARLINK Standard Dish, V3
Kickstand Dishy
Adjustable Starlink Gen 3 Mount, Starlink Mounting Kit Gen 3, Starlink Long
Wall Mount for Starlink Internet Kit Satellite, Starlink roof Mount with
Starlink Gen 3 Pipe Adapter, for Gen 3 Starlink
Equipped with Starlink Gen 3 Pipe Adapter: Our Starlink Gen 3 adapter uses
a unique buckle design, which is sturdy and durable and can be easily
installed without the use of screws, preventing screws from damaging your
Starlink.
The Starlink Gen 3 Dish Pipe Adapter is engineered for easy installation
and is accompanied by all necessary hardware
Adjustable Angle gen 3 mount: with flexible adjustment angles to suit
various installation scenarios, ensuring optimal positioning for different
wall and roof slopes. Versatility meets convenience, catering to diverse user
needs.
Package include : gen 3 mount, gen 3 buckle, 6 screws -
Add to cartWide Use: The Starlink long wall mount is
specifically designed for Starlink internet kit satellite, Compatible with V2
Starlink, Can freely choose the Installation location according to the actual
situation, and is ideal for various types of walls, Such as an external wall
near the top of the eaves, etc. Double Protection: 1 The Triangle
reinforcement structure design is stronger than a single pole and will not
shake even in strong winds, Protecting your Starlink device more safely. 2
Our Starlink mount uses a larger and wider rectangle base, That has a strong
load-bearing capacity. Firmly Fixed: Starlink wall mount with screws to fix
the starlink will become loose after long-term use, Causing the starlink to
fall and be damaged. We use a click-in desgin adapter securely fix the
Starlink for a long time without loosening or scratching equipment,
anti-corrosion, and anti-rust. You don’t need to worry about the Starlink
shaking or falling, Providing better safety. Eas -
Add to cart[(Extra Long Starlink V2 Wall Mount)] Our
starlink long walll mount that can extend up to 26 inches in length, so there
is no need to worry about signals being blocked by the eaves. [(Easy
Installation for Everyone)] Installing the starlink long arm wall mount
requires no professional skills or a significant amount of installation time.
The Starlink Wall Mount comes with all the necessary hardware. With various
screws provided for quick installation on different wall types, you can find
installation diagrams for different screws on the product details page,
making it easy for you to get started quickly without spending too much time
on the installation process. [(Sturdy Structural Desig)] Using triangle Iron
plate reinforcement support, The rectangular base design is stronger than a
circular base. and will not shake even in strong winds, Protecting your
Starlink device more safely. [(High-Quality Starlink Mount)] The Starlink
Wall Mount with high-quality steel, ensures durabil -
Add to cart[(Retractable)] Compared to other
products with fixed length, our starlink long wall mount made a retractable
design with extended support arms to give you a less obstructed view of your
starlink.
[(With adapter-button switch)] This starlink mount has adapters inside that
match the fixing buttons, so all you need to do to install and remove the
star chain is to press the button. It protects the star chain itself and
adapts better than other products that fasten with screws.
[(High-Quality Starlink Mount)] The Starlink Wall Mount with high-quality
steel, ensures durability and a prolonged service life. Starlink wall mount’s
robust construction is designed to withstand the test of time, providing
stability even in adverse weather conditions.
[(Easy Installation for Everyone)] Installing the starlink long arm wall
mount requires no professional skills or a significant amount of installation
time. The BUJ Starlink Wall Mount comes with all the necessary hardware. With
various scr -
Add to cartProduct usage: The starlink magnet fixing
set can fix the starlink on the iron house roof or iron flat surface
permanently, or temporarily fix the starlink on the roof of the car. Strong
magnetic force: Each strong neodymium magnet has a pulling force of 70
pounds. Four magnets simultaneously fix the starlink bracket, providing a
vertical pulling force of 280 pounds, making the starlink dish more stable on
iron surfaces. Secure installation: Starlink magnet mounting kit is made of
high-quality materials, ensuring stability and strong load-bearing capacity
even in strong winds. This guarantees stable support for starlink dish and
provides optimal security for your installation. Product features: The
surface of each magnet is wrapped by a rubber coating to protect the car
paint from damage. All hardware is made of 304 stainless steel and will not
rust after long-term use. We also provide 5 plastic adapters that just fit
the original Starlink bracket, so that you will n -
Add to cart[(5KM/3 Miles Long Distance)] – ULNA Dual
Band Gigabit Wireless Bridge provides stable transmission over long distances
up to 5KM/3.1Miles.Supports DHCP Server, Guest Mode, and broadcast 4 SSID at
the same time. Ideal for extending ethernet from the main house to the barn,
office, garage, farm etc. [(WiFi 5 High Speed)] – The point to point wireless
bridge is equipped with a high gain 4x15dBi antenna and supports 2.4G/5.8G
dual-band, enjoying Gigabit wireless speeds. Allowing you to upload and
download files, stream HD videos, video conferencing, and engage in online
gaming faster. [(1200Mbps Lightning-fast Speed)] – With advanced technology
IEEE802.11ac+, concurrent bandwidth of the PTP wireless bridge up to
1200Mbps, 300mbsp on 2.4G while 900Mbps on 5.8G. Compatible with major
carriers, including Starlink, AT&T, Verizon, T-Mobile, Sprint, etc.
[(Designed for outdoors)] -WiFi bridge outdoor is made of high quality ABS
material, IP65 waterproof, -+6KV thunder-resistant, dustproo -
Add to cart3 PCS ARGB & PWM Fan (BLACK) with
proprietary Control box and Remote Supports Main MB ARGB -
3 PCS ARGB & PWM Fan (WHITE) 3 fans configuration
KSh12,000.00Add to cart3 PCS ARGB & PWM Fan (WHITE) with
proprietary Control box and Remote Supports Main MB ARGB -
Add to cart2 Installation Types: This wireless
bridge bracket mount can be installed on a pole or wall-mounted, both
installation methods are very simple, you can choose according to your needs.
160o Adjustment: The wireless bridge mount pole can be adjusted 160degup and
down. After you install the CPE or antenna, adjust the angle of the pole to
receive a stronger signal Sawtooth & Groove Design: The double screw
design is easy to adjust the angle and increase the fixing strength.This
wireless bridge bracket mount comes with non-slip gears. After adjusting the
angle of the pole, you only need to give it a twist use screwdriver and the
pole will be securely fixed. Sunscreen & Waterproof: Designed with
high-quality iron material,and surface of this pole mount is painted, and the
top is equipped with a waterproof cap, which makes this bracket mount a good
waterproof performance. It’s very suitable for outdoor use. Perfect For Heavy
Mounting Tasks: Installation weight up to 66LB,s -
Add to cartHigh-Speed Connectivity For Star link V3
Dish: The DAQA Cable for Starlink, Seamlessly connects to Starlink Gen 3 for
uninterrupted internet performance.
Durable Construction: Robust 32ft Star link cable ensures long-lasting
reliability and weather resistance.
Easy Installation: This OEM Star link Cable Designed for quick setup with
Starlink mounting kits, ideal for DIY enthusiasts.
Cost-Effective Solution: Save on high-cost original cables; perfect for
outdoor use and mobility.
Portable Backup: Ideal backup cable for mobile use during outdoor
activities -
Read more4-Input Antenna Amplifier CA-312 (Built-In Power Supply, ALCAD 904 Series)
Specifications:
The CA-312 amplifier is used to amplify and distribute TV and FM radio signals. It is a brand-name device designed for the use in small and medium size community installations.
The CA-312 is equipped with four band inputs and two outputs.
This model fills up the gap among CA-210, CA-215, AI-200 and CF-512 amplifiers.
The amplifier is fed from its internal stabilized power supply, which is powered directly from the mains. It is not designed for the use in open spaces.
The amplifier has the option of feeding preamplifiers with 24 V voltage, and maximum current of 50 mA through the UHF input. Preamplifier’s feeding is switched on automatically as soon as the preamp is detected.
Tags:
Antenna Amplifier
ALCAD
Amplifier
? Order on WhatsApp -
Add to cartUnique Design: This vacuum suction cup is
designed for Starlink Gen 2 flat mounts and can replace the magnetic base.
Also suitable for Starlink Gen 3 adapter, install it on the vehicle glass
sunroof. Widely Used: The suction cup mount base provides a super grip on any
smooth nonporous surface including countertops, Glass, Metal, and more.
Suitable for use on cars, Boats, RVs, etc. NOTE: Only four suction feet are
included in the package Excellent Material: Each power mount cup has up to
120 pounds of suction power. The hand pump vacuum suction cup is made of
durable rubber material, which has strong stability, large load-bearing
capacity, and is not easy to fall off. It has excellent oil, high and low
temperature, and wear resistance, ensuring long-lasting performance and
reliability. Easy Installation: Press the handle, until the cup attaches
completely, to securely attach the base on any smooth with a strong vacuum
suction. After use, you can squeeze the rubber she -
Read more415048 Tri-Boom Outdoor Compact Chrome Antenna
Specifications:
Gain: 16 dB
Collapsible design for easy installation
Compatible with the new UHF bandwidth
Aluminium construction for lightweight handling
16 tube-shaped elements for optimal reception
Helps reduce 4G interference
UHF triple boom design
Tags:
Antenna
UHF
Television
Outdoor
Metronic
? Order on WhatsApp -
Read more4K 60Hz 2×2 HDMI Video Wall Controller
Specifications:
Supports 1 HDMI 2.0 input and 4 HDMI outputs
Input resolution up to 4K@60Hz, output 1920x1080P@60Hz
Divides single image signal into 4 displays for video wall
Supports multiple splicing modes, plug and play
180? flip function available only in 2×2 mode (top row only)
Designed for horizontal screen setups only
Plug Type: EU (AC100-240V)
Durable iron shell for heat dissipation and longevity
Tags:
Video Wall Controller
2×2 HDMI Splitter
4K Processor
TV Splicer
EU Plug
? Order on WhatsApp -
Read more
4K 60Hz 2×2 HDMI Video Wall Controller
Specifications:
Supports 1 HDMI 2.0 input and 4 HDMI outputs
Input resolution up to 4K@60Hz, output 1920x1080P@60Hz
Divides single image signal into 4 displays for video wall
Supports multiple splicing modes, plug and play
180? flip function available only in 2×2 mode (top row only)
Designed for horizontal screen setups only
Plug Type: EU (AC100-240V)
Durable iron shell for heat dissipation and longevity
Tags:
Video Wall Controller
2×2 HDMI Splitter
4K Processor
TV Splicer
EU Plug
? Order on WhatsApp -
Read more4K 8MP Fixed Dome PoE IP Camera With Color Night Vision – With Two-Way Audio, Human & Vehicle Detection, SD Support Up To 512GB
Specifications:
Resolution: 4K 8MP Ultra HD
Lens Options: 2.8mm or 3.6mm Fixed Lens
View Angle: 108? Wide Angle
Camera Type: Dome, PoE IP
Night Vision: Full Color Night Vision
Audio: Two-Way Intercom
AI Features: Human and Vehicle Detection
Storage: Supports SD Card up to 512GB
Onvif Compatible: Yes
App Support: Seetong
Operating Temperature: -40?C to 60?C
Power Supply: PoE or 48V Adapter
Mounting: Outdoor Dome Mount
Tags:
4K CCTV
PoE IP Camera
Color Night Vision
AI Detection
Outdoor Dome Camera
Seetong App
? Order on WhatsApp -
Read more4K HDMI Switch 5 In 1 Out, 5 Port HDMI Switcher Selector Box
Specifications:
Connect up to 5 HDMI source devices to 1 HD TV, monitor, or projector
Supports 4K (3840?2160) @ 30Hz, HDCP, HDR, 3D, 1080P, 720P
Supports HDMI cable length: input up to 5m (16.4ft), output up to 25m (82ft)
Three switching methods: Auto-switching, Manual button, IR remote control
Sturdy metal design with excellent heat dissipation for stable performance
Plug and Play ? No software or drivers required
Compatible with PC, PS3, PS4, Xbox, HD players, Blu-ray players, and more
Ideal for home theater, office setups, gaming, and meeting environments
Tags:
HDMI Switch
4K HDMI
5 Port HDMI
Video Selector
Gaming Setup
AV Splitter
? Order on WhatsApp -
Read more4K HDMI Switch Cable | 3 In 1 Or 5 In 1 HDMI Switcher With Remote
Specifications:
3 in 1 Out or 5 in 1 Out HDMI input to 1 output switcher
Supports 4K (3840×2160) @ 30Hz resolution and 3D
Compatible with PS3, PS4, Xbox 360, Xbox One, Blu-ray, laptops, Apple TV and more
IR remote control included (for 5 in 1 version)
Manual switching button on device (3 in 1 version)
HDMI 1.4b and HDCP 1.0/1.1 compliant
Supports uncompressed audio like LPCM and compressed formats like DTS, Dolby Digital, Dolby TrueHD
Deep Color support: 24-bit, 30-bit, and 36-bit
Supports bandwidth up to 10.2Gbps and 300MHz max frequency
Plug and play design, no extra power required for most devices
Tags:
hdmi
video
switch
splitter
cables
? Order on WhatsApp -
Read more4K HDMI Switch Cable HD Video Switcher Adapter 3 Input 1 Output Port Hub For PC TV Xbox PS3 PS4 Projector Monitor Splitter
Specifications:
3 HDMI inputs / 1 HDMI output
Supports 3D and 4K resolution
HDCP pass-through supported
Total TMDS throughput up to 8.91Gbps
Supports uncompressed LPCM and compressed DTS, Dolby Digital, Dolby TrueHD audio
Maximum single link video range: 1920×1080
Supports 2.5Gbps/250MHz per channel
12-bit Deep Color per channel (36-bit total)
Tags:
HDMI Switch
4K HDMI
HDMI Hub
Video Splitter
Gaming HDMI Switch
? Order on WhatsApp -
Read more4K HDTV Splitter 3 In 1 Out
Specifications:
3 HDMI inputs and 1 HDMI output for switching between multiple devices
Compatible with Xbox360, PS4, PS3, DVB Receivers, Blu-ray Player, Laptops
Supports 4K resolution at 3840x2160P / 30Hz and 3D display
Manual switching via key-press button ? no need to unplug devices
HDTV 1.4 and HDCP compliant, supports HD Audio
No external power required (may need two active sources to power)
Built-in 1.8ft pigtail HDMI cable for easy plug and play
36-bit Deep Color and uncompressed/compressed audio support
Ideal for trade shows, conference rooms, bedrooms, kitchens, and more
Tags:
HDMI Switch
4K HDMI
3 Port HDMI
HDTV Splitter
Game Console Switch
AV Selector
? Order on WhatsApp -
Read more4K Wireless HDMI Transmitter And Receiver Extender Kit
Specifications:
Supports 4K@30Hz HDMI with H.265 encoding
Wireless transmission range up to 720ft
Ultra-low latency of 0.1 seconds
1TX to 4RX support for multi-room setups
UVC USB-C interface for HD 1080P@60Hz output
Multiple power modes for versatile use
Ideal for DSLR cameras, projectors, TVs, and streaming setups
Tags:
HDMI
4K
Wireless
Transmitter
Receiver
Extender
Streaming
DSLR
? Order on WhatsApp -
Read more4K120Hz KVM Switch HDMI 8K60Hz KVM Switches For 2 Computers Share1 Monitors And 4 USB 3.0 Support Desktop Control Includes 2 USB 3.0 Cables And Power Adapters
Specifications:
Supports 2 computers sharing 1 monitor and 4 USB 3.0 devices
Supports resolutions up to 8K @ 60Hz and 4K @ 120Hz with 48Gbps bandwidth
Two switching methods: front panel pushbutton and external control switch
4 USB 3.0 ports with data transfer speeds up to 5Gbps, backward compatible
Auto-adjustment for image detail and color vibrancy
Compatible with Windows, macOS, Linux, Vista, XP, Unix
Suitable for gaming, multimedia teaching, office, research, and home theater
Includes 2 USB 3.0 cables and power adapters
Tags:
KVM Switch
8K HDMI
4K120Hz
USB 3.0 Hub
Multi-Computer
Display Control
? Order on WhatsApp -
-
Read more5 Port 4K HDMI Switch
Specifications:
Connect and switch between 5 HDMI inputs to 1 HDMI output
Supports up to 4K UHD resolution (3840 x 2160)
Compatible with 480p, 720p, 1080i, 1080p formats
HDMI 1.4b and HDCP 1.3 compliant
Supports 12-bit color depth and 3D pass-through
Switchable via included IR remote control
Regenerates HDMI signal when placed at end of long HDMI cable
Ideal for home, office, and multimedia setups
Tags:
HDMI Switch
4K HDMI
Remote Switcher
Home Theater
Multi-Port HDMI
? Order on WhatsApp -
Add to cart5.8GHz / 300Mbps High-Speed Transmission:
This wireless bridge utilize advanced 5.8GHz 300Mbps wireless technology and
are equipped with a 12dBi high-gain antenna. With a maximum transmission
range of up to 2 miles (Barrier-free), they offer reliable and fast
connectivity. The built-in 100Mbps LAN port ensures seamless wired network
speed, making it ideal for point-to-point internet access sharing, remote IP
camera surveillance, or remote network Wi-Fi access. PTMP Pre-programmed for
Easy Setup: Simply connect both bridges to the PoE adapters using Ethernet
cables, and the system will automatically power on. After waiting for 1
minute, the equipment will pair and establish a connection. The
“Link” green LED indicator confirms successful pairing. This
feature simplifies installation and eliminates the need for complex
configurations, perfect for extending internet access to locations like
garages, barns, stores, and warehouses using 5.8GHz wireless transmission
instead of c -
Add to cartThe Bluedery CPE220 Starlink network
bridge is a 5.8G Long Range WiFi Ethernet bridge with a digital display. It
is compliant with the 802.11a and 802.11n standards to ensure compatibility.
Point-to-point pairing can be easily achieved by dialing without the need to
access the GUI, eliminating the requirement for complex setup programs. This
simplifies long-range wireless coverage, data transmission, and wireless
monitoring, saving time and costs while upholding a professional
standard.
Easy Setup with Mounting Bracket: This wireless bridge point-to-point
outdoor comes with pole and wall mounting kits, making installation a breeze.
Simply attach the wireless bridge to the kickstand and secure it to a pole or
wall using hose clamps and screws. Connect both WiFi bridges to PoE adapters
with Ethernet cables, power on the devices, and wait for them to
automatically pair and connect. The “Link” green LED indicator will
illuminate once a successful pairing is achieved. -
Add to cart50FT long Ethernet cable for Starlink kit
and mesh wifi router, compatible for Starlink equipment.
High quality and durable, with a shielding layer to prevent interference
and ensure signal stability.
Support
4Ghz and 5Ghz dual-band Wi-Fi, providing fast and stable internet
connection for your home or office.
8m long power supply cable, compatible with the Starlink power adapter. -
Read moreWhat is included in Package:
5×Suction Cup Mount
About this item
?Secure Mounting for Starlink Mini?- This suction cup mount is designed specifically for the Starlink Mini dish antenna. Five high-strength suction cups provide a secure and stable hold on various smooth surfaces, ensuring reliable performance even during travel.
?Super Strong Suction Power?- This Starlink Mini mount features heavy-duty suction cups with sticky rims and an air pump design. This combination creates an incredibly strong hold, keeping your Starlink Mini firmly in place, even on bumpy roads or at higher speeds.
?Versatile Placement Options?- The five suction cups allow for flexible and customizable mounting configurations. Mount your Starlink Mini securely on the sunroof, rear windshield, front windshield, or even directly on the car roof, optimizing placement for best signal reception.
?Highly Adjustable for Optimal Positioning:?- The mount includes an adjustable arm with 360-degree rotation and a 180-degree adjustable serrated edge. This flexibility allows for precise adjustments to achieve the perfect angle and ensure optimal signal strength for your Starlink Mini.
?Durable Construction and Easy Installation?- Constructed from high-quality ABS material, this Starlink Mini mount can withstand temperatures up to 80°C. The mount is easy to install simply clean the mounting surface, attach the suction cups, and adjust the arm as needed.
Spec
Part No MINI-BR7
Color Black
Material Acrylonitrile Butadiene Styrene (ABS)
Suction Cup Size 70mm / 2.76″
Compatible Starlink Mini Original Kickstand -
Add to cartEasy to install magnetic roof mount for
starlink:strong magnets mounting kit can attach to any metallic surface,such
as an iron house,garages,cruise ships,RV car,no need to drill to create a
permanent fixing point,easy to install your starlink V2 (Gen 2) antennas
internet kit satellite dish.
Super strong heavy duty magnets mounting kit:4 pack super powerful NdFeB
neodymium round magnets, containing rare earth magnets with A3 steel ring,
have 150lb vertical magnetic pull force on base, no falling, emergency
braking and no shaking to protect your starlink antennas internet kit
satellite.
Well quality neodymium magnets roof mount:the starlink magnetic roof mount
is a neodymium magnet N42 with a 0.35 inch/ 8.6 mm thick metal base,Ni+Cu+Ni
Tripler Layer good corrosion-resistance coating, used both in fresh water and
marine. A3 Steel shells can prevent the naked magnet from scratching and
shattering with bare magnets, these round magnet stud will serve you for a
long time. -
Read more6U Internet Network Cabinet Server Rack Enclosure Wall Mounted Network Cabinet
Specifications:
Complies with 19′ international standard
Size: 300*530*400mm
Made of SPCC cold rolled steel plate
Front door: Toughened Glass & Perforated Steel
Color: Grey/Black or customizable
Depth: 400mm
Application: Network Integration System
OEM & ODM service available
Certification: ISO9001, FCC, CE, RoHS
Tags:
6U
Server Rack
Wall Mount
Network Cabinet
Enclosure
? Order on WhatsApp -
Read more
6U Internet Network Cabinet Server Rack Enclosure Wall Mounted Network Cabinet
Specifications:
Complies with 19′ international standard
Size: 300*530*400mm
Made of SPCC cold rolled steel plate
Front door: Toughened Glass & Perforated Steel
Color: Grey/Black or customizable
Depth: 400mm
Application: Network Integration System
OEM & ODM service available
Certification: ISO9001, FCC, CE, RoHS
Tags:
6U
Server Rack
Wall Mount
Network Cabinet
Enclosure
? Order on WhatsApp -
Add to cartHigh-Quality Iron Material: The TV
antenna mount is constructed from durable iron material coated with zinc for
rust and corrosion protection. The heavy-duty pole/wall mount kit includes
brackets with lag bolts, ensuring longevity and reliability in outdoor
installations. Universal Design: Designed for TV antennas, access points,
wireless bridges, PS4 wall mounting, wall TV stands, starlink satellite
dishes, weather station and other devices, offering wide adaptability to meet
various application needs. Enhanced Stability: The robust design of the mount
offers strong support, ensuring stability during the installation of antennas
or other devices. It is capable of securely holding masts with an outer
diameter (O.D.) of up to 3-1/4 inches, with a minimum compatible size of
1/2-inch O.D. The mount features slots measuring 27.5 inches in length and
2.6 inches in width, providing versatility for installing bridges, WiFi
repeaters, or other devices with mounting holes. -
Add to cart75ft Starlink Ethernet Adapter Extension
Cable with Repair Kit, Starlink Replacement Cable Extend Original Cable to
150ft, IP68 Waterproof, Built-in Shielding Oxygen-Free Copper Easily to
Expandable: Our Starlink extension cable easily repairs and extends the
original Starlink Rectangular Satellite V2 cable, with wiring tools included
so you don’t have to purchase additional expensive 150ft Starlink cables Nice
Fix: If your Starlink cable is bitten badly or for other reasons the old
cable casing is cracked and exposed to wires, resulting in a very slow
internet connection and constant loss of signal, this Starlink cable
extension kit will be the perfect solution to your problem. Extended
Connectivity: Elevate your Starlink experience with our 75ft Cable Extension
& Repair Kit, allowing you to extend your connectivity up to150ft for
optimal placement. Weatherproof Design: Designed with IP68 waterproof
technology, our cable ensures reliable performance in any weather condition,
making it -
Add to cart[(Starlink Compatibility)] Our starlink
extension cable is specially designed for the Starlink Rectangular Satellite
V2, with optimal connection guaranteed.
[(Easily Expandable)] Our Starlink extension cable easily repairs and
extends the original Starlink Rectangular Satellite V2 50ft cable to 125ft
cable, with wiring tools included.
[(Stable Transmission)] The starlink cord cable is produced according to
the standards of the original and has a bandwidth of 1200 Mpbs, making
possible smooth data transfer and streaming without lag.
[(Waterproof Design)] The starlink extension cable is contains 8 copper
wires for data transfer, ensuring a connection without interference. The
replacement cable has a waterproof and rainproof design, making it suitable
both in- and outdoors and in adverse weather conditions.
[(Packing List)] 1*75FT Starlink Cable, 2*Waterproof Connectors, 4*RJ45
Jacks, 1*Wire Stripper Tool, 1*Ethernet Crimper. -
75ft Starlink Cable Extension Repair Kit Starlink Replacement Cable Extend Original IP68 Waterproof
KSh23,997.00Add to cart75ft Starlink Cable Extension &
Repair Kit, Starlink Replacement Cable Extend Original Cable to 225ft, IP68
Waterproof, Adopts Pure Copper Data Transmission Extended Connectivity:
Elevate your Starlink experience with our 75ft Cable Extension & Repair
Kit, allowing you to extend your connectivity up to 225ft for optimal
placement. Weatherproof Design: Designed with IP68 waterproof technology, our
cable ensures reliable performance in any weather condition, making it ideal
for outdoor use. Pure Copper Transmission: Enjoy high-speed and efficient
data transmission with our cable, featuring pure copper construction for a
robust and reliable connection. Seamless Repair Solution: Perfect for
repairing damaged cables or extending your current setup, our kit provides a
hassle-free solution to keep your Starlink connection strong. Versatile
Compatibility: Compatible with various Starlink systems, our kit offers a
versatile solution for different setups, ensuring compatibility with your
specif -
Add to cartHigh-Speed Connectivity For Star link V3
Dish: The DAQA Cable for Starlink, Seamlessly connects to Starlink Gen 3 for
uninterrupted internet performance.
Durable Construction: Robust 75ft Star link cable ensures long-lasting
reliability and weather resistance.
Easy Installation: This OEM Star link Cable Designed for quick setup with
Starlink mounting kits, ideal for DIY enthusiasts.
Cost-Effective Solution: Save on high-cost original cables; perfect for
outdoor use and mobility.
Portable Backup: Ideal backup cable for mobile use during outdoor
activities -
Read more8 Channel 350W Console Mixing 99 Dsp Effects USB Interface Sound Power Amplifier Mixer
Specifications:
brand name — FANGWU
model number — PHY-12DUSB
power — 350w
frequency range (hz) — 18HZ-20KHZ
Application — Stage Performance
Single package size: 68X58X26 cm
Single gross weight: 17.000 kg
Tags:
conference
microphone system
audio equipment
meeting conference
? Order on WhatsApp -
Read more8 Channels Gooseneck Desk Audio Equipment
Specifications:
Carrier frequency band: 640 ~ 690MHz (optional)
Number of channels: 8 channels
Sensitivity: S / N> 60Db when input 6dBv
Band width: 30MHz
Maximum offset: ? 45KHz
Comprehensive T.H.D: <0.7% @ 1KHz Comprehensive frequency response: 45Hz ~ 18KHZ ? 3dB Power supply: DC 12V Output socket: XLR parallel and 6.3 non-parallel jacks Receiving distance: about 70 meters Tags: conference microphone system audio equipment meeting conference ? Order on WhatsApp -
Read moreAC 110V-220V TO DC 5 V 12 V 24 V 2A 3A 5A 10A 15A
Specifications:
BrandName?KINGOFFER
Origin?CN(Origin)
PlugType?None
OutputVoltage?5V/12V/24V
Certification?CCC
Material?Aluminum
OutputSignal?DC
ItemType?LightingTransformers
ModelNumber?5V/12V/24VTransformers
nputVoltage?110V-240V
Tags:
KINGOFFER
Power Supply
? Order on WhatsApp -
Read moreAc/Dc 3v-12v 3v-24v 9v-24v 4v-24v Adjustable Universal Power Adapter Us/Eu/Uk/Au Pin Regulated Power Supply With Display Screen
Specifications:
Output interface — 5.5mm*2.5mm
Is_customized — Yes
Usage — Switching
Output type — Dc
Connection — Plug in
Insulation Material — PE
Connection — Plug in
Input voltage — Ac 100-240 v
Output current — 5a / 2a / 3a
Output voltage — Dc 3v-12v / 3v-24v / 9v-24v/4v-24v
Power — 60w 48w 72w
Tags:
Ac/dc cable
Adjustable Power Adapter
Universal Power Adapter
? Order on WhatsApp -
Read moreAcmeen Electronic Smart Wireless Digital Password Code Door Lock
Specifications:
Material: Stainless steel
Lock panel dimensions: 312.6*72 mm
Color options: Silvery, Black, Red Bronze
Working voltage: DC4.5-6.5V (4pcs 1.5V alkaline batteries)
Suitable for door thickness: 38-70mm
Working humidity: 20%~80%
Working temperature: -20~65?C
Lock mortise type: 2#S
Unlock modes: Card, Password, and Mechanical key
Tags:
Smart Lock
Password Lock
Electronic Lock
Wireless
Door Lock
? Order on WhatsApp -
Add to cartNote:This Starlink replacement cable is
applies to V2 but not V3
Extended Reach: The Starlink cable extends up to 150 feet, providing
flexibility in positioning your satellite dish for optimal signal reception
and network performance
High-Speed Data Transfer: Capable of supporting transfer rates up to
1200Mbps, this cable ensures fast and stable internet connectivity for all
your home, office, or business needs
Premium Quality Materials: Made with oxygen-free copper and tinned copper
conductors, this cable ensures efficient, stable signal transmission and
clear, reliable data transfer
Plug and Play Convenience: The cable is designed for easy installation with
Starlink Gen2, offering seamless integration without complex setup–simply
plug in and connect
IP68 Waterproof Rating: Featuring a waterproof, flame-retardant PVC sheath
and strong shielding, this cable is built to withstand extreme weather
conditions, ensuring durability and reliability
Electromagnetic -
Read moreAdapter 12V 2A – Nerokas 100-240VAC 50/60Hz
Specifications:
Model: PLIU-1077
Input: 100-240VAC
Power 50/60Hz
Output: 12VDC 2000mA
Plug: EU Plug
Tags:
Power Adapters
24V5A6A8A10A
LED Light Strip Power LCD Display
? Order on WhatsApp -
Read moreAbout this item
?Durable and Stable Construction?- This universal stand is made of high quality ABS plastic for durability. The rugged construction ensures reliable performance and stability of the device, while the non-slip grip pads provide extra security and protection against scratches.
?Secure Suction Cup Mounting?- The heavy-duty suction cup base provides a stable and secure hold on your car’s windshield or dashboard. The strong suction ensures that your device stays firmly in place, even on bumpy roads, minimizing vibrations and providing a stable viewing platform for your devices.
?360-Degree Rotation and Adjustability?- This car mount features a fully adjustable design. It offers 360-degree rotation and multi-angle adjustments, allowing you to find the perfect angle for your Starlink Mini, whether in portrait or landscape mode. The flexible gooseneck stand further enhances adjustability, ensuring optimal positioning.
?Easy Installation and Removal?- This phone and tablet car holder is designed for effortless installation and removal. The tool-less design makes it easy to attach or detach the mount in seconds. Simply press the suction cup onto a clean surface and lock the lever for a secure hold. Detaching is just as easy, leaving no residue behind.
?Wide Compatibility?- This universal stand accommodates a wide range of devices, from smartphones to tablets. The adjustable grip expands from 5.52 inches to 11.02 inches in length or width, securely holding various sizes, including your Starlink Mini. It’s also compatible with devices up to 0.63 inches thick, ensuring a secure fit for a variety of models.
Spec
Part No MINI-BR10
Color Black
Material Acrylonitrile Butadiene Styrene (ABS)
Suction Cup Size 90mm
Matching Sizes 5.52″- 11.02″ long and 0.63″ thick (Max)
Compatible Starlink Mini, Phone and Tablet -
Add to cartThe patent has been registered.
Adjustable Angle: Our Starlink gen 3 mount offers flexible adjustment angles
to suit various installation scenarios, ensuring optimal positioning for
different wall and roof slopes. Versatility meets convenience, catering to
diverse user needs. Equipped with Starlink Gen 3 Pipe Adapter: Our Starlink
Gen 3 adapter uses a unique buckle design, which is sturdy and durable and
can be easily installed without the use of screws, preventing screws from
damaging your Starlink. Secure Installation: Featuring a broad base, our
Starlink gen 3 wall mount offers stability and robust load-bearing capacity
even in adverse weather conditions, ensuring steadfast installation. Enhanced
safety with a sturdy design for durability. Aesthetic Appeal: Starlink
mounting kit gen 3 is made from powdered coated steel and high-strength
thermoplastic, complementing the sleek aesthetics of Starlink gen 3 devices,
exuding a sophisticated and upscale vibe. Elevate yo -
Add to cartMultiple Adjustments: The Starlink mount
can freely adjust the installation angle according to actual conditions to
adapt to various usage scenarios, such as walls and roofs with different
slopes. This design is very convenient for users.
Precise Adapter: The Starlink roof mount comes with a precision adapter
compatible with V2 Starlink, and the double-knob screw fixation makes
Starlink installation more stable and convenient. The adapter is made of 2mm
heavy duty steel and is able to withstand greater weight. Because Starlink
equipment is very precious, sturdy mounting brackets are needed to ensure
safety.
Firm Installation: The Starlink pole mount features a wide, thickened base
that remains stable even in high winds and prevents accidental sliding or
loosening. The overall use of electrophoresis technology will not rust and
prevent equipment corrosion when used outdoors for a long time. The strong
carrying capacity provides better security for your Starlink equipment -
Add to cartAdjustable Starlink Mounting Kit – This
starlink mount compatible with Starlink V2. Adjustable Starlink Mounting Kit
– This starlink v2 mounting kit can freely adjust the installation angle
according to the actual situation. This Starlink mounting kit can adapt to
various usage scenarios, such as walls and roofs with different slopes. This
design is very convenient for users, This is important because different
usage scenarios require different angles, moreover Starlink roof mount helps
enhance the performance and reliability of your Starlink internet service.
Starlink Mount Firm Installation – This Starlink pole mount features a
generous base, which is stable and has a strong load-bearing capacity, even
in high winds. The generous base design makes the entire Starlink mount more
sturdy, providing better safety.The Starlink mounting kit provides all the
necessary components for mounting the Starlink, ensuring a secure and stable
installation by offering various mounting -
Add to cart[(Adjustments Performance)] Starlink
mount can freely adjust the installation angle according to the actual
situation. Starlink pivot mount can adapt to various usage scenarios, such as
walls and roofs with different slopes. This design is very convenient for
users, This is important because different usage scenarios require different
angles. [(Compatible with V2 Starlink )] The Starlink roof mount is equipped
with a precise adapter Compatible with V2 Starlink, which is made of
High-quality metal material, and able to withstand greater weight, making
Starlink mount installation more stable and convenient. Because Starlink
equipment is precious and requires a sturdy mounting bracket to ensure
safety. [(Easy of Installation)] No other adapters, screws are needed to
tighten the mount. Our mount is so strong and secure that it allows the tube
to be inserted directly and tightly. This Starlink Roof Mount is easy to
install, you just need to follow the steps in the instruction manual -
Add to cartThe patent has been registered. Multiple
Adjustments: Starlink roof mount can freely adjust the installation angle
according to the actual situation. Starlink mounting kit can adapt to various
usage scenarios, such as walls and roofs with different slopes. This design
is very convenient for users, This is important because different usage
scenarios require different angles. Precise Adapter: The Starlink roof mount
is equipped with a precise adapter Compatible with V2 Starlink, which is made
of High-quality metal material, and able to withstand greater weight, making
Starlink mount installation more stable and convenient. Because Starlink
equipment is precious and requires a sturdy mounting bracket to ensure
safety. Firm Installation: Starlink pole mount features a generous base,
which is stable and has a strong load-bearing capacity, even in high winds.
The generous base design makes the entire Starlink mount more sturdy,
providing better safety. Aesthetically Pleasi
