Alcad UE-301 Quad lnb, universal

Related products

• 

  Inverto LNB Unicable 2, programmable 40mm for 32 receivers

  KSh9,998.00

  The LNB Inverto Unicable2 allows installations with up to 32 satellite receivers* through a single cable.

  The LNB is factory set to “dynamic mode”.

  The change to “static mode” can be done using the optionally available programmer.

  Dynamic mode (delivery status)

  Up to 32 receivers/tuners connected via a single coaxial cable. All devices have access to the total number of transponders available for the destination satellite. The receiving device must comply with EN50494 (CH0-CH7) or EN50607 (CH0-CH31). Example: A total of 120 transponders are transmitted from the satellite. Each of the 120 transponders can be received by any of up to 32 receivers/tuners installed in the home.

  Static mode (adjustable by programmer**)

  Any number of receiving devices connected with a single coaxial cable can receive up to 32 transponders. Here, 32 transponders are converted to 32 satellite IF frequencies using digital channel stacking technology. Example: A DTH operator offers its service through 32 transponders. Any number of receiving devices (Legacy or Unicable) can be connected via a single coaxial cable, each with access to any of 32 transponders.

  The LNB is powered by a connected STB or via an optional external power supply/power inserter if the connected STB cannot supply enough power. The Unicable2 LNB is backward compatible and complies with EN50494 and EN50607 standards. Communication between the multi-switch and connected uni-cable receivers is performed in accordance with EN50494 and/or EN50607 and can be defined for each user band, allowing seamless integration into installations that only have EN50494 capability or a combination of EN50494 /EN50607- Compatible PVRs and latest generation HGW. To learn more about Unicable 2 technology and the benefits it brings, visit: www.inverto.tv

  Features
  Low phase noise, compatible with DVB-S2 (HDTV)
  low noise figure
  Very high cross polarization isolation
  Programmable static mode with frequency assignment**
  Antenna adjustment mode

  *8 subscribers can be used for terminals with Unicable standard (EN50494)

  (CH0-CH7)

  In terminals with Unicable II standard (EN50607) it can be used for all 32 participants

  (CH0-CH31)

  ** Programming device not included

  Technical specifications
  Input frequency range: 10.7GHz ~ 12.75GHz
  Noise figure: 1dB max.
  LOW frequency: 10.4 GHz
  LO Frequency Accuracy @ 25?C: 1.0 MHz max.
  Initial accuracy LO: 500 kHz max.
  Phase noise LO at 1 kHz: -60 dBc/Hz max.
  LO phase noise at 10 kHz: -80 dBc/Hz max.
  Conversion Gain: 55dB min.
  Gain variation (over full band): ?0.75 dB/UB max.
  Image rejection: 40 dB min.
  1 dB compression point (@ output): 0 dBm min.
  Cross Polarization Isolation: 22dB min.
  SWR output: 2.5 : 1
  Current consumption: 280 mA max. @ 18VDC
  Operating temperature: -30 ?C ~ +60 ?C
  Output impedance: 75 ?
  Output Connector Type: F Type (Female)
  Weight: 152.5g
  Unicable II? (dCSS) Port Specifications

  Bandwidth User Band: Configurable, 10 MHz ~ 64 MHz (default 36 MHz)

  Output Power Level (dSCR/dCSS with AGC): -25dBm (83dBuV) +/-1dB

  Number of User Bands: Up to 32 User Bands

  Standard configuration: 32 BU in dynamic mode:

  CH1 1210MHz (EN50494+EN50607)

  CH2 1420MHz (EN50494+EN50607)

  CH3 1680MHz (EN50494+EN50607)

  CH4 2040MHz (EN50494+EN50607)

  CH5 984MHz (EN50494+EN50607)

  CH6 1020MHz (EN50494+EN50607)

  CH7 1056MHz (EN50494+EN50607)

  CH8 1092MHz (EN50494+EN50607)

  CH9 1128MHz (EN50607)

  CH10 1164MHz (EN50607)

  CH11 1256MHz (EN50607)

  CH12 1292MHz (EN50607)

  CH13 1328MHz (EN50607)

  CH14 1364MHz (EN50607)

  CH15 1458MHz (EN50607)

  CH16 1494MHz (EN50607)

  CH17 1530MHz (EN50607)

  CH18 1566MHz (EN50607)

  CH19 1602MHz (EN50607)

  CH20 1638MHz (EN50607)

  CH21 1716 MHz (EN50607)

  CH22 1752MHz (EN50607)

  CH23 1788 MHz (EN50607)

  CH24 1824 MHz (EN50607)

  CH25 1860MHz (EN50607)

  CH26 1896 MHz (EN50607)

  CH27 1932MHz (EN50607)

  CH28 1968 MHz (EN50607)

  CH29 2004MHz (EN50607)

  CH30 2076 MHz (EN50607)

  CH31 2112MHz (EN50607)

  CH32 2148MHz (EN50607)

  Control protocols: DiSEqC1.x / DiSEqC2.x, EN50494 / EN50607

  Channel isolation: 25 dB min.

  Add to cart

  Quick View
• 

  LNB Inverto Twin Monoblock 23mm, 3? for 80cm satellite dish

  KSh7,454.00

  Specifically designed for the European DTH markets, this Monoblock LNB allows for dual satellite reception. It can be used for satellite broadcast reception (on an 80cm antenna dish) of any two satellites spaced with 3?. This LNB enables the signal distribution to a Set Top Box with Single Tuner. It is optimized for High Definition transmissions and provides excellent Noise Figure performance. Designed to meet strict specifications and manufactured to the highest industry quality standards, this LNB is an ideal solution for satellite broadcast reception across Europe.

  Features
  Low Phase Noise, DVB-S2 (HDTV) compliant
  Low Noise Figure (0.2 dB)
  Low Power Consumption
  Very high Cross Polarization Isolation
  Very high Frequency Stability

  Specifications
  Technical specifications
  Low band input frequency range 10.7 GHz ~ 11.7 GHz
  Low band output frequency range 950 MHz ~ 1950 MHz
  Low band LO frequency 9.75 GHz
  High band input frequency range 11.7 GHz ~ 12.75 GHz
  High band output frequency range 1100 MHz ~ 2150 MHz
  High band LO frequency 10.6 GHz
  Noise figure 0.2 dB typ. (0.7 dB max.)?
  LO temperature drift ?3.0 MHz Max.
  LO initial accuracy ?1.0 MHz Max.
  LO phase noise @ 10 kHz -80 dBc / Hz max.
  Conversion gain 50 dB ~ 60 dB
  Gain ripple (over 26 MHz bandwidth) ?0.75 dB
  Gain variation (over full band) ?4 dB max.
  Image rejection 40 dB min.
  1 dB compression point (@ output) 0.0 dBm min.
  Control, Satellite A/B/C/D Selection DiSEqC 1.0 (Sat A* = East Satellite Position, Sat B = West Satellite Position)
  * Default Satellite Reception
  Cross polarization isolation 22 dB min.
  Output VSWR 2.0 : 1?
  In band spurious level -60 dBm max.
  Current consumption 210 mA max. @ 11 V ~ 20 V
  Operating temperature -30 ?C??~??+60 ?C
  Output impedance 75 ?
  Output connector type F-Type (female)
  Recommended Dish Size 75-85 cm (F/D = 0.6)
  Weight 460 g

  Add to cart

  Quick View
• 

  LNB Inverto Single Monoblock 23mm, 6? for 80cm dish with…

  The LNB is supplied with a 40 mm plastic ring adaptor to allow mounting onto a standard 40mm LNB holder.

  Specifically designed for the European DTH markets, this Monoblock LNB allows for dual satellite reception from orbital positions 13?E and 19.2?E over a single 80cm offset satellite dish antenna with F/D = 0.6 and their distribution to one satellite receiver.

  The LNB receives satellite broadcasts with horizontal and vertical polarizations within the 10.7 ~ 12.75 GHz frequency range. It provides a single universal output port with 950 ~ 2150 MHz IF frequency range. The output F-type port carries also power supply and control signals. DiSEqC 1.0 commands allow selecting the orbital satellite position. As long as no DiSEqC command has been received, the default feed is the “Sat A” position (i.e. 13?E). Polarization (vertical/horizontal) and band (low/high) are selected using 13/18VDC and 0/22kHz control signals.

  The LNB is optimized for Ultra High Definition (4K/8K) transmissions and provides excellent Cross polarization isolation, Phase Noise and Noise Figure performances. Designed to meet strict specifications and manufactured to the highest industry quality standards, this LNB is an ideal solution for satellite broadcast reception of Hotbird 13?E and Astra 19.2?E across Europe.

  Features
  Low Phase Noise, DVB-S2 (HDTV) compliant
  Low Noise Figure
  Low Power consumption
  Very high Cross Polarization Isolation
  Very high Frequency stability

  Specifications
  Low band input frequency range 10.7 GHz ~ 11.7 GHz
  Low band output frequency range 950 MHz ~ 1950 MHz
  Low band LO frequency 9.75 GHz
  High band input frequency range 11.7 GHz ~ 12.75 GHz
  High band output frequency range 1100 MHz ~ 2150 MHz
  High band LO frequency 10.6 GHz
  Noise figure 0.6 dB typ., 1.0 dB max.
  LO frequency accuracy @ 25? C ?0.5 MHz max.
  LO temperature drift ?1 MHz max.
  LO initial accuracy ?0.5 MHz max.
  LO phase noise @ 1 kHz -60 dBc/Hz
  LO phase noise @ 10 kHz -80 dBc/Hz
  LO phase noise @ 100 kHz -90 dBc/Hz
  Conversion gain 58 dB ~ 68 dB
  Gain ripple (over 26 MHz bandwidth) ?0.75 dB max.
  Gain variation (over full band) 6 dBpp max.
  Image rejection 50 dB min.
  1 dB compression point (@ output) 0 dBm min.
  Cross talk 22 dB min.
  Control, Satellite A/B/C/D Selection DiSEqC 1.0: Sat A* = Hotbird 13?E, Sat B = Astra 19.2?E* Default Satellite Reception
  Polarity info Horizonatal polarization: 18 VDC
  Vertical polarization: 13 VDC
  Low band: 0 kHz
  High band: 22 ?4kHz
  Output VSWR 2.0 : 1 max.
  In band spurious level -65 dBm max.
  Current consumption 120 mA max. per port (10 VDC ~ 20 VDC)
  Operating temperature -30 ?C ~ +60 ?C
  Output impedance 75 ?
  Output connector type F-Type (female)
  Recommended Dish Size 80 cm (F/D = 0.6)
  Weight 225 g

  Read more

  Quick View
• 

  LNB Inverto Universal Octo Premium 40mm PLL

  Specifically designed to address the demand of the global DTH market for a competitive and 4G/LTE protected solution, this LNB provides optimized reception capabilities using the latest chipset technology and waveguide design for satellite signal reception. It enables the reception of satellite TV from a single satellite and its distribution to 8 set top boxes (or four twin tuner PVR) without the need of external multiswitch. The LNB supports HD and UHD transmissions, delivers excellent RF performances, very low power consumption and importantly engineered to mitigate interferences from 4G/LTE transmissions. Manufactured to the highest industry quality standards and engineered to meet strict specifications, this LNB is an ideal solution for DTH operators and satellite broadcast reception across the world.

  Features
  Low Phase Noise, DVB-S2 (HD and UHD) compliant
  Low Noise Figure
  Low power consumption
  High Cross Polarization Isolation
  High Frequency stability

  Specifications
  Input frequency range 10.7 GHz ~ 12.75 GHz
  Output frequency range 950 MHz ~ 1950 MHz
  Low band LO frequency 9.75 GHz
  High band LO frequency 10.6 GHz
  Noise figure 0.7 dB typ. (1 dB max.)
  LO frequency accuracy @ 25? C ?400 kHz max.
  LO temperature drift ?800 MHz max.
  LO phase noise @ 10 kHz -90 dBc/Hz max.
  Conversion gain 55 dB min.
  Gain ripple (over 26 MHz bandwidth) ?0.6 dB
  Gain variation (over full band) ?4 dB
  Image rejection 40 dB min.
  3th order intermodulation – ICP3 10 dBm min.
  1 dB compression point (@ output) 0 dBm min.
  Cross polarization isolation 22 dB typ.,
  Control signal Ca (V) 10.0 V ~ 14.0 V
  Control signal Cb (H) 16.0 V ~ 20.0 V
  Control signal Cc (band switching) 22 kHz ?4 kHz
  Output VSWR 2.3 : 1
  In band spurious level -60 dBm max.
  Current consumption 210 mA max. @ 11 VDC ~ 20 VDC
  Operating temperature -30 ?C ~ +60 ?C
  Output impedance (LNB2) 75 ?
  Output connector type F-type (female)
  Dish F/D ratio 0.6
  Weight 299 g

  Read more

  Quick View
• 

  QUAD LNB converter 4 out universal offset horn Televes

  KSh13,392.00

  Range of universal LNBs low noise figure and high gain that allow capturing signals in the KU band.

  Add to cart

  Quick View