APC 3Kva Smart-UPS 3000VA LCD 230V SMT3000 UPS – Kenya

Related products

• 

  APC Smart-UPS VT 20kVA 400V 6 .0 kWatts SUVTP20KH4B4S UPS – Kenya

  KSh1,700,000.00

  APC Smart-UPS VT 20kVA 400V 6 .0 kWatts SUVTP20KH4B4S UPS 

  APC Smart-UPS VT 20kVA 400V 6 .0 kWatts SUVTP20KH4B4S UPS comes with high density, double-conversion on-line power protection with scalable runtime. 20KVA APC UPS Increases total power capacity by using multiple uninterruptible power supplies simultaneously.

   

  Power the connected equipment with multiple uninterruptible power supplies to increase system redundancy. APC 20KVA UPS ensures clean uninterrupted power to protected equipment. It provides fast serviceability and reduced maintenance requirements via self-diagnosing, field-replaceable modules.

   

  APC Smart-UPS VT 20kVA is generator compatible and supports the replacement of the batteries when week. APC Smart-UPS VT 20kVA protects connected loads from surges, spikes, lightning, and other power disturbances. The 20kva Ups also provides temporary battery power when the utility power is out.

   

  Hence it is Cold-start capable APC Intelligent battery management ensures maximum battery performance and life through intelligent, precision temperature compensated battery charging. APC Smart-UPS VT 20kVA UPS comes with automatic self tests insure battery reliability. It also warn customers in advance of battery replacement.

   

  Convenient, easy to connect, hot-swappable battery modules provide battery replacement without powering down. 20kVA APC Smart-UPS provides pure sine wave output which is recommended by server manufacturers using active power factor corrected (PFC) power supplies.

   

  20kVA APC Smart-UPS Safety-agency approved means that you can deploy Smart-UPS with confidence that they meet or exceed the industry’s most rigorous standards. 20kVA APC Smart-UPS ensures the product has been tested and approved to work safely with the connected service provider equipment and within the specified environment.

   

  20kVA APC Smart-UPS offer services that Increases availability by allowing a trained user to perform upgrades and replacements of the batteries reducing Mean Time to Repair (MTTR).

  APC Smart-UPS VT 20kVA ups specifications
  Output power capacity: 16.0 KWatts / 20.0 kVA
  Max Configurable Power (Watts): 16.0 KWatts / 20.0 kVA
  Nominal Output Voltage: 400V 3PH
  Output Voltage Note: Configurable for 380 : 400 or 415 V 3 Phase nominal output voltage
  Efficiency at Full Load: 95.3 %
  Output Voltage Distortion: Less than 5% at full load
  Output Frequency (sync to mains): 47 – 53 Hz for 50 Hz nominal
  Output Frequency (not synced): 50Hz +/- 0.1% for 50Hz nominal
  Other Output Voltages: 380, 415
  Load Crest Factor: 3 : 1
  Topology: Double Conversion Online
  Waveform type: Sine wave
  Maximum Output Current: 32
  Bypass: Built-in Maintenance Bypass, Built-in Static Bypass
  Nominal Input Voltage: 400V 3PH
  Input frequency: 40 – 70 Hz (auto sensing)
  Input Connections: Hard Wire 5-wire (3PH + N + G)
  Input voltage range for main operations: 304 – 477V
  Efficiency at Full Load: 95.3 %
  Other Input Voltages: 380, 415
  Maximum Input Current: 27.0A
  Input Power Factor at Full Load: 0.98
  Battery type: VRLA
  Included Battery Modules: 4
  Typical recharge time: 5hour(s)
  Nominal Battery Voltage: +/-192 V (split battery referenced to neutral)
  Expected Battery Life (years): 3 – 5
  RBC Quantity: 4
  Extendable Run Time: 1
  Interface Port(s): DB-9 RS-232 , Smart-Slot
  Pre-Installed SmartSlot™ Cards: AP9631
  Control panel: Multi-function LCD status and control console
  Audible Alarm: Audible and visible alarms prioritized by severity
  Emergency Power Off (EPO): Yes

  Add to cart

  Quick View
• 

  APC 750VA Smart Value, SMV750I-MS UPS – Kenya

  KSh40,000.00

  750VA APC Smart Value SMV750I-MS UPS 

  750VA APC Smart Value SMV750I-MS UPS  Easy UPS SMV is built with resilient sheet metal that rigidly holds and protects critical electrical components.

   

  APC Smart Value SMV750I-MS UPS Automatically steps up low voltage and steps down high voltage to levels that are suitable for your equipment. SMV750I-MS UPS Provides the ability to adapt the UPS for optimal performance in specific power environments or generator applications.

   

  SMV750I-MS UPS pure form of sinewave designed to emulate utility power, will support your device upon battery backup. SMV750I-MS UPS Ensures the product has been tested and approved to work safely with the connected service provider equipment and within the specified environment.    

  Add to cart

  Quick View
• 

  APC 2kva Smart-UPS, 2000VA , LCD 230V, SMC2000I – Kenya

  KSh184,000.00

  APC Smart-UPS C 2000VA 2kva LCD 230V SMC2000I

  APC Smart-UPS C 2000VA 2kva LCD 230V SMC2000I Provides temporary battery power when the utility power is out. Green moderated-pending operating mode that bypasses unused electrical components in good power conditions to achieve very high operating efficiency without sacrificing any protection.

  2kVA APC Smart-UPS High online efficiency reduces utility costs, generates less heat.LCD Status display provides key UPS status at a glance. Multiple status indicators with load and battery bar graphs.Pure sine wave

  2000 VA APC smart UPS intelligent and efficient network power protection from entry level to scaleable runtime. Ideal UPS for servers, point-of-sale, routers, switches, hubs and other network devices.

  APC Smart-UPS C 2000VA 2kva specifications
  MODEL NAME
  APC Smart-UPS C 2000VA LCD RM 2U 230V

  INCLUDES
  CD with software

  STANDARD LEAD TIME
  Usually Ships within 2 Weeks

  PRODUCT DISTRIBUTION
  Afghanistan

  Output
  OUTPUT POWER CAPACITY
  1300 Watts / 2000 VA

  MAX CONFIGURABLE POWER (WATTS)
  1300 Watts / 2000 VA

  NOMINAL OUTPUT VOLTAGE
  230V

  OUTPUT VOLTAGE DISTORTION
  Less than 5%

  OUTPUT FREQUENCY (SYNC TO MAINS)
  50 Hz

  Line Interactive

  WAVEFORM TYPE
  Sine wave

  OUTPUT CONNECTIONS
  (2) IEC Jumpers (Battery Backup)

  Input
  NOMINAL INPUT VOLTAGE
  230V

  INPUT FREQUENCY
  50/60 Hz +/- 3 Hz (auto sensing)

  INPUT CONNECTIONS
  IEC-320 C20

  INPUT VOLTAGE RANGE FOR MAIN OPERATIONS
  180 – 287 V

  Batteries & Runtime
  BATTERY TYPE
  Maintenance-free sealed Lead-Acid battery with suspended electrolyte : leakproof

  TYPICAL RECHARGE TIME
  3 hour(s)

  REPLACEMENT BATTERY
  APCRBC133

  RBC QUANTITY
  1

  Communications & Management
  INTERFACE PORT(S)
  USB

  CONTROL PANEL
  Multi-function LCD status and control console

  AUDIBLE ALARM
  Alarm when on battery : distinctive low battery alarm : configurable delays

  EMERGENCY POWER OFF (EPO)
  —

  Surge Protection and Filtering
  SURGE ENERGY RATING
  300 Joules

  FILTERING
  Full time multi-pole noise filtering : 0.3% IEEE surge let-through : zero clamping response time : meets UL 1449

  Physical
  MAXIMUM HEIGHT
  89.0 mm

  MAXIMUM WIDTH
  480.0 mm

  MAXIMUM DEPTH
  470.0 mm

  RACK HEIGHT
  2 U

  NET WEIGHT
  26.2 kg

  SHIPPING WEIGHT
  30.16 kg

  SHIPPING HEIGHT
  250.0 mm

  SHIPPING WIDTH
  590.0 mm

  SHIPPING DEPTH
  600.0 mm

  COLOR
  Black

  UNITS PER PALLET
  16.0

  Environmental
  OPERATING ENVIRONMENT
  0 – 40 °C

  OPERATING RELATIVE HUMIDITY
  0 – 95 %

  OPERATING ELEVATION
  0-3000 meters

  STORAGE TEMPERATURE
  -15 – 45 °C

  STORAGE RELATIVE HUMIDITY
  0 – 95 %

  STORAGE ELEVATION
  0-15000 meters

  AUDIBLE NOISE AT 1 METER FROM SURFACE OF UNIT
  42.000 dB

  ONLINE THERMAL DISSIPATION
  81.000 BTU/hr

  Conformance
  APPROVALS
  C-tick

  STANDARD WARRANTY
  2 years repair or replace

  EQUIPMENT PROTECTION POLICY
  Lifetime : $150000

  Sustainable Offer Status
  ROHS
  Compliant

  REACH
  REACH: Contains No SVHCs

  Add to cart

  Quick View
• 

  APC 10KVA , Smart-UPS SRT 10000VA 230V, SRT10KXLI – Kenya

  KSh990,000.00

  10KVA APC Smart-UPS SRT 10000VA 230V SRT10KXLI 

  10KVA APC Smart-UPS SRT 10000VA 230V SRT10KXLI Patent-pending operating mode that bypasses unused electrical components in good power conditions to achieve very high operating efficiency without sacrificing any protection.

   

  APC Smart-UPS SRT 10000VA UPS automatic internal bypass Supplies utility power to the connected loads in the event of a UPS power overload or fault. APC Smart-UPS SRT 10000VA UPS Plug and play external batteries Ensures clean, uninterrupted power to the loads when adding extra runtime to the UPS.

   

  APC Smart-UPS SRT 10000VA replaceable batteries Increases availability by allowing a trained user to perform upgrades and replacements of the batteries reducing Mean Time to Repair (MTTR)

  Manageability
  LED status indicators

  Quickly understand unit and power status with visual indicators.
  Serial connectivity

  Provides management of the UPS via a serial port.
  InfraStruXure Manager Compatible

  Enables centralized management via the APC InfraStruXure Manager.
  Network manageable

  Most models provide remote power management options of the UPS over the network. Many do not have NMC embedded.
  SmartSlot

  Customize UPS capabilities with management cards.
  Serviceability
  Audible alarms

  Provides notification of changing utility power and UPS power conditions
  Disconnected battery notification

  Warns when a battery is not available to provide backup power.
  Predictive failure notification.

  Provides early-warning fault analysis ensuring proactive component replacement.
  Automatic self-test

  Periodic battery self-test ensures early detection of a battery that needs to be replaced.
  User-replaceable batteries

  Increases availability by allowing a trained user to perform upgrades and replacements of the batteries reducing Mean Time to Repair (MTTR)
  Protection
  Cold-start capable

  Provides temporary battery power when the utility power is out.
  Generator compatible

  Ensures clean, uninterrupted power to protected equipment when generator power is used.
  Safety-agency approved

  Ensures the product has been tested and approved to work safely with the connected service provider equipment and within the specified environment.
  Resettable circuit breaker

  Easy recovery from overloads; no need to replace a fuse. (Not available on Wall Tap SKUs)
  Frequency and voltage regulation

  Gives higher application availability by correcting poor frequency and voltage conditions without using the battery.
  Power conditioning

  Protects connected loads from surges, spikes, lightning, and other power disturbances.
  Input power factor correction

  Minimizes installation costs by enabling the use of smaller generators and cabling.
  APC Smart-UPS SRT 10000VA UPS specifications
  Lead time
  Usually in Stock
   
  General
  provided equipment
  CD with software Documentation CD Installation guide Temperature probe USB cable Warranty card Web/SNMP management card
   
  Physical
  colour
  Black
   
  depth
  71.5 cm
   
  height
  43.2 cm
   
  net weight
  111.82 kg
   
  width
  26.3 cm
   
  Input
  network frequency
  40…70 Hz auto-sensing
   
  number of input connectors
  1 hard wire 3-wire (1P + N + E) 1 hard wire 5-wire (3P + N + E)
   
  input voltage limits
  100…275 V adjustable (half load) 173…476 V adjustable (half load) 160…275 V
   
  inputvolt_other
  220 V 240 V 380 V 415 V
   
  input voltage
  230 V 400 V 3 phases
   
  Output
  rated power in W
  10000 W
   
  Maximum configurable power in W
  10000 W
   
  harmonic distortion
  Less than 2 %
   
  output frequency
  50/60 Hz +/- 3 Hz sync to mains
   
  outputvolt_other
  220 V 240 V
   
  crest factor
  3 : 1
   
  UPS type
  Double conversion online
   
  Wave type
  Sine wave
   
  output connector type
  Hard wire 3-wire (H N + E) 1
   
  nb of power socket outlets
  6 IEC 60320 C13 3 IEC Jumpers 4 IEC 60320 C19
   
  bypass type
  Internal bypass (automatic and manual)
   
  output voltage
  230 V
   
  Conformance
  product certifications
  CE EAC IRAM RCM VDE
   
  standards
  EN/IEC 62040-1 EN/IEC 62040-2
   
  marking
  CE Mark
   
  Environmental
  ambient air temperature for operation
  0…40 °C
   
  relative humidity
  0…95 %
   
  operating altitude
  0…10000 ft
   
  ambient air temperature for storage
  -15…45 °C
   
  storage altitude
  0.00…15240.00 m
   
  acoustic level
  55 dBA
   
  heat dissipation
  1947 Btu/h
   
  IP degree of protection
  IP20
   
  Batteries & Runtime
  battery type
  Lead-acid battery
   
  number of battery filled slots
  0
   
  Battery recharge time
  1.5 h
   
  number of battery replacement quantity
  2
   
  liquid value
  0
   
  battery voltage
  +/- 192 V (split battery referenced to neutral)
   
  Communications & Management
  free slots
  1
   
  control panel
  Multifunction LCD status and control console
   
  alarm
  Audible and visible alarms prioritized by severity
   
  Emergency power off
  Yes
   
  Surge Protection and Filtering
  Surge energy rate
  480 J
   
  Packing Units
  Package 1 Weight
  126.82 kg
   
  Package 1 Height
  46.1 cm
   
  Package 1 width
  60 cm
   
  Package 1 Length
  100 cm
   
  Offer Sustainability
  EU RoHS Directive
  Compliant EU RoHS Declaration
   
  Mercury free
  Yes
   
  RoHS exemption information
  Yes
   
  WEEE
  The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins
   
  Optimized Energy Efficiency
  Energy efficient product

  Add to cart

  Quick View
• 

  2kVA APC Smart-UPS, 2000VA, LCD 230V, SMC2000I-2U UPS – Kenya

  KSh175,000.00

  2kVA APC Smart-UPS C 2000VA LCD 230V SMC2000I-2U UPS

  2kVA APC Smart-UPS C 2000VA LCD 230V SMC2000I-2U UPS maximum output capacity of 1300 watts is ideal UPS for top efficiency power back. APC by Schneider Electric is reputed for outstanding quality and great performance. APC Smart-UPS is the UPS of choice, trusted for best backup performance and dependable equipment protection.

  for load below 1300 watts, the APC Smart-UPS C 2000VA (SMC2000I) is what you need. APC Smart-UPS C 2000VA has excellent features to protect your equipment and deliver the power backup you require. With its boost and trim Automatic Voltage Regulation (AVR) function, your equipment gets extended power supply (lower voltage is regulated to supply your equipment).

  APC Smart-UPS C 2000VA (SMC2000I) ensures higher application availability by correcting low and high voltage conditions without using the battery. SMC2000I-2U UPS there is the power conditioning function of this APC UPS. With power conditioning, the UPS protects connected loads from surges, spikes, lightning, and other power disturbances.

  SMC2000I-2U UPS gives notification you need for low battery status with the distinctive low battery alarm of the APC Smart-UPS C 2000VA. Best of all, APC Smart-UPS C 2000VA (SMC2000I) intelligent battery management system will help give your battery the extended battery life APC promises.

  This product has a battery life expectancy of 3 – 5 years, all things being equal. APC Smart-UPS C 2000VA (SMC2000I) a multifunction LCD status and control console. View LCD displays that report the status of the equipment to help you get the best out of your UPS.

  APC Smart-UPS C 2000VA (SMC2000I) specifications
  Main
  acoustic level
  42 dBA

  battery curve
  A

  battery type
  Lead-acid battery

  product certifications
  C-Tick CE EAC GOST IRAM SABS VDE

  curve equation
  Efficiency

  curve load maximum
  100 %

  curve X-axis maximum
  100 %

  curve X-axis minimum
  0 %

  curve X-axis title
  Load

  curve X-axis units
  Percentage

  curve Y-axis maximum
  100 %

  curve Y-axis minimum
  50 %

  curve Y-axis title
  Efficiency

  curve Y-axis units
  Percentage

  equipment protection policy
  Lifetime : $150000

  extended runtime
  0

  Maximum configurable power in VA
  2000 VA

  Maximum configurable power in W
  1300 W

  liquid value
  0

  marking
  GS Mark

  mounting location
  Front

  mounting mode
  Rack-mounted

  mounting preference
  Lower

  number of battery filled slots
  0

  number of battery free slots
  0

  Battery recharge time
  3 h

  number of battery replacement quantity
  1

  depth
  47 cm

  free slots
  0

  height
  8.9 cm

  number of cables
  1

  performance multiplier
  1

  Number of power module filled slots
  0

  Number of power module free slots
  0

  net weight
  26.2 kg

  rated power in VA
  2000 VA

  rated power in W
  1300 W

  Surge energy rate
  300 J

  Number of tare power
  26 W

  width
  48 cm

  noise suppression
  Full time multi-pole noise filtering : 0.3% IEEE surge let-through : zero clamping response time : meets UL 1449

  number of rack unit
  2U

  operating altitude
  0…10000 ft

  ambient air temperature for operation
  0…40 °C

  battery life
  3…5 year(s)

  ambient air temperature for storage
  -15…45 °C

  storage altitude
  0.00…15240.00 m

  Transfer time
  8 ms typical : 10 ms maximum

  size UPS version
  Internetworking Server Telecom

  UPS size
  S

  UPS type
  Line interactive

  Wave type
  Sine wave

  graph display
  1

  redundant
  No

  show note OP temperature
  No

  two post mountable
  1

  Yes

  colour
  Black

  input voltage limits
  180…287 V

  input voltage
  230 V

  battery charger power
  144 W rated

  nb of power socket outlets
  6 IEC 320 C13 2 IEC Jumpers

  network frequency
  50/60 Hz +/- 3 Hz auto-sensing

  output voltage
  230 V

  plug standard
  IEC 320 C20

  provided equipment
  CD with software Documentation CD Installation guide Rack mounting brackets USB cable

  relative humidity
  0…95 %

  Battery power in VAH
  432 VAh runtime

  product web sub-family
  Entry level

  value multiplier
  1

  harmonic distortion
  Less than 5 %

  Environment
  heat dissipation
  81 Btu/h

  Output
  output frequency
  50 Hz sync to mains

  Communications & Management
  control panel
  Multifunction LCD status and control console

  alarm
  Alarm when on battery : distinctive low battery alarm : configurable delays

  Packing Units
  Package 1 Weight
  30.16 kg

  Package 1 Height
  25 cm

  Package 1 width
  59 cm

  Package 1 Length
  60 cm

  Number of Units in Package 3
  16

  Offer Sustainability
  Sustainable offer status
  Green Premium product

  REACh free of SVHC
  Yes

  EU RoHS Directive
  Compliant EU RoHS Declaration

  Mercury free
  Yes

  RoHS exemption information
  Yes

  WEEE
  The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins

  Add to cart

  Quick View