APC 3kVA Smart-UPS C 3000VA LCD 230V UPS, SMC3000I – Kenya

Related products

• 

  APC 1KVA Easy UPS, SRV RM 1000VA 230V ,with RailKit Rackmount UPS, SRV1KRIRK – Kenya

  KSh75,000.00

  APC 1KVA Easy UPS, SRV RM 1000VA 230V ,with RailKit Rackmount UPS,  SRV1KRIRK

  Easy UPS SRV1KRIRK is a rack mount 1000VA/800W online double-conversion uninterruptible power supply providing 11 minutes runtime at 50% load for critical IT servers and electronic systems. The UPS provides power conditioning, a no-break output sinewave supply and has a built-in automatic bypass.

  APC SRV1KRIRK UPS Features
  ECO Mode: an green energy saving mode allowing the input voltage range to be adjusted via the front panel LCD
  Intelligent Battery Management: to maximise battery performance and help extend working life through temperature compensated charing
  Overvoltage Cut-off Device Protection: to prevent damage to the UPS from high over voltage surges
  Input Power Factor Correction: for reduced installation cable costs and generator compatibility
  LCD Display: an intuitive interface provides detailed and accurate information on UPS and battery performance
  Communications Ports: USB, RS232 and dry signal contacts
  Communications Card Interface Slot: for the APC Network Management Card
  Automatic Diagnostic Testing: automatic periodic battery self-testing to provide early indication that the UPS battery requires replacement
  Built-in Automatic Bypass: to safely transfer the UPS load(s) to the mains power supply if the UPS develops a fault condition or is overloaded
  Extended Runtime Battery Packs: L models to scale up the UPS runtime to several hours

  The APC Easy UPS SMV series is available in 1kVA, 2kVA, 3kVA, 6kVA and 10kVA UPS sizes.

  APC Easy UPS SRV1KRIRK Applications
  IT network servers and storage devices
  High performance computers and workstations
  Server room racks
  Data centre server cabinets
  Automated industrial control applications
  APC Easy UPS SRV1KRIRK specifications
  Model: SRV1KRIRK
  Capacity: 1000VA/800W
  Topology: On-Line double-conversion
  Input Voltage: 230V
  Output Voltage: 230V
  Form Factor: Rackmount
  Rack Size: 2U
  Rail Kit: Included
  Outlets: Multiple IEC C13 outlets
  Battery Type: Sealed lead-acid
  Typical Recharge Time: 3 hours
  Communication Ports: Intelligent Card Slot, USB
  Surge Protection: Yes
  Automatic Voltage Regulation (AVR): Yes
  Efficiency: Up to 93%
  LCD Display: Yes.
  Audible Alarm: Yes
  Dimensions (H x W x D): Rack size, 2U
  Weight: Varies depending on configuration

  Add to cart

  Quick View
• 

  500VA APC Easy UPS, BV500VA 230V, BV500I-MSX UPS – Kenya

  KSh9,900.00

  500VA APC Easy UPS BV 500VA 230V BV500I-MSX UPS 

  500VA APC Easy UPS BV 500VA 230V BV500I-MSX UPS automatically steps up low voltage and steps down high voltage to levels that are suitable for your equipment.

  APC Easy UPS BV 500VA 230V  Allow flexibility for setup in tight locations and mounting on wall or other surfaces. APC Easy UPS BV 500VA 230V battery Back up and protect your hardware and data during power outages, surges and spikes.

  500VA APC Easy UPS BV 500VA 230V BV500I-MSX UPS Outlets provide abundant runtime for network gateway equipment and other critical low-power devices, allowing for hours of internet access during a power outage. BV500I-MSX UPS  Maximizes battery performance, life, and reliability through intelligent, precision charging.

  BV500I-MSX UPS AVR Preserves battery life and maximizes runtime by correcting low voltages without discharging the battery.

  500VA APC Easy UPS BV 500VA 230V BV500I-MSX UPS Specification

  Output – Output power capacity 300Watts / 500VA – Max Configurable Power (Watts) 300Watts / 500VA – Nominal Output Voltage 230V – Output Frequency (not synced) 50/60 Hz +/-1 Hz – Topology Line Interactive – Waveform type Stepped approximation to a sinewave – Transfer Time 6ms typical : 10ms maximum

  Input – Nominal Input Voltage 230V – Input frequency 50/60 Hz +/- 5 Hz (auto sensing) – Input Connections IEC-320 C14 – Cord Length 1.52meters – Number of Power Cords 1 – Batteries & Runtime – Battery type Maintenance-free sealed Lead-Acid battery with suspended electrolyte : leakproof – Expected Battery Life (years) 3 – 5 – Efficiency View Efficiency Graph (Available in Technical Tab on site)

  Communications & Management – Control panel LED Status display with On Line : On Battery – Audible Alarm Alarm when on battery : distinctive low battery alarm : overload continuous tone alarm – Disclaimer: This documentation is not intended as a substitute for and is not to be used for determining suitability or reliability of these products for specific user applications. – Product link: APC-EASY-UPS-BV-500VA-AVR-Universal-Outlet-230V/P-BV500I-MS Page 1 of 2

  Technical Specifications – APC EASY UPS BV 500VA, AVR, Universal Outlet, 230V | BV500I-MS | Downloaded on 05/30/2019 (EST) Physical – Maximum Height 92MM, 9.25CM – Maximum Width 160MM, 16.05CM – Maximum Depth 305MM, 30.5CM – Net Weight 3.9KG – Shipping weight 4.2KG – Shipping Height 237MM, 23.7CM – Shipping Width 143MM, 14.3CM – Shipping Depth 373MM, 37.3CM – SCC Codes 1073130433829 8

  Environmental – Operating Temperature 0 – 40 °C – Operating Relative Humidity 0 – 90 % – Operating Elevation 0-1968.3meters – Audible noise at 1 meter from surface of unit

  APC 500VA Specifications
  Capacity: 500VA/300W
  Input voltage: 230V
  Output voltage: 230V
  Output connections: Universal Outlet x 2
  Input connection: IEC-320 C14
  Output waveform: Stepped approximation to a sinewave
  Transfer time: 6ms typical, 10ms maximum
  Surge energy rating: 273 Joules
  Battery type: Sealed, maintenance-free lead-acid
  Typical recharge time: 6 hours
  Backup runtime: Up to 10 minutes at half load, 3 minutes at full load
  Audible noise: Less than 40 dBA at 1 meter distance
  Operating temperature: 0°C to 40°C.
  Dimensions (H x W x D): 161 x 123 x 190 mm
  Weight: 4.3 kg

  Add to cart

  Quick View
• 

  APC Easy UPS On-Line SRV 3000VA Smart UPS, SRV3KRILRK – Kenya

  KSh180,000.00

   APC Easy UPS On-Line SRV 3000VA Smart UPS, SRV3KRILRK 

  APC Single phase Easy UPS is designed for IT professionals or network administrators to maintain business uptime and continuity. This 3kVA double-conversion on-line 4U rackmount UPS provides pure sine wave power and extended runtime to support critical electronics during power disruptions.

  The SRV comes with IEC 320 C20 input and 4x Brazilian 2P+T outlets. The On-Line UPS has a intelligent card slot for optional Network Management Card (AP9544, SRVSMB001, VGL9601l) that enables network-based UPS monitoring and management. The UPS can connect to EcoStruxure IT or third-party centralized management platforms.

  The Built-in automatic and manual bypass provide seamless power to the load even in the event of an internal detected fault or error in UPS. The UPS and the built-in lead-acid battery has a 2-year warranty. Ideal for small data centers, manufacturing facilities, computer rooms, network storage devices, telecommunication, and healthcare IT.

  High quality, Double-conversion On-line UPS designed for essential power protection needs even in the most unstable power conditions.
  Includes: Basic UPS signalling RS-232 cable, CD with software, Rack mounting brackets, Rack mounting support rails, USB cable, User manual.
   
  SRV3KRILRK specifications
  Model: APC Easy UPS On-Line SRV 3000VA Smart UPS (SRV3KRILRK)
  Power Capacity: 3000VA / 2700W
  Input Voltage: 220V, 230V, 240V (Selectable)
  Output Voltage: 220V, 230V, 240V (Configurable)
  UPS Topology: Double-conversion online
  Input Connection: Hardwired
  Output Connections: Multiple IEC C13 and C19 outlets
  Battery Type: Sealed Lead Acid (Maintenance-free)
  Battery Runtime: Varies depending on load and battery configuration
  Interface Ports: USB, RS-232, SmartSlot for optional management card
  Alarm Notifications: Audible alarms, LED indicators, and optional network management card for remote monitoring
  Form Factor: Rack-mountable (2U)
  Transfer Time: Zero transfer time to battery during power outages
  Efficiency: High efficiency mode for energy savings
  Automatic internal bypass
  Pure static bypass switch without bridging contactor securing a fast and reliable transfer to and from bypass, rated for 125% nominal load.
  Automatic restart of loads after UPS shutdown
  Automatically starts up the connected equipment upon the return of utility power.
  ECO Mode
  Operating mode that by-passes unused electrical components in good power conditions to achieve high operating efficiency without sacrificing protection
  Input power factor correction
  Minimizes installation costs by enabling the use of smaller generators and cabling.
  Intelligent battery management
  Maximizes battery performance, life, and reliability through intelligent, precision charging.
  Intelligent Card Slot
  Customize UPS capabilities with management cards.
  LCD graphics display
  Text and mimic diagrams that display modes of operation, system parameters and alarms.
  Serial connectivity
  Provides management of the UPS via a serial port.
  USB connectivity
  Provides management of the UPS via a USB port (not available on all models).
  Easy UPS On-Line Features & Benefits
  Availability

  Intelligent battery management

  Maximizes battery performance, life, and reliability through intelligent, precision charging.
  Features

  Safety-agency approved

  Ensures the product has been tested and approved to work safely with the connected service provider equipment and within the specified environment.

  Allows the user to manage the UPS functions, schedule automatic shutdown and monitor the power grid occurrences through an interactive interface that ensures an easy and intuitive monitoring.

  Management Software

  Double conversion on-line topology

  Guarantees a consistently high level of power quality. Any disturbances on the distribution waveform are regenerated via the zero transfer time AC to DC then DC to AC conversion process. The battery is only used as a back-up source.

  Management Software

  Allows you to easily monitor your utility power and manage your UPS.

  Pure sine wave output on battery

  Simulates utility power to provide the highest degree of compatibility for active PFC (power factor corrected) servers and sensitive electronics.

  Intuitive LCD interface

  Provides clear and accurate information in multiple languages with the ability to configure the UPS locally with easy to use navigation keys.

  ECO Mode

  Operating mode that by-passes unused electrical components in good power conditions to achieve high operating efficiency without sacrificing protection

  Generator compatible

  Ensures clean, uninterrupted power to protected equipment when generator power is used.

  High efficiency

  High efficiency rates that remain stable even at lower operating power levels

  Input power factor correction

  Minimizes installation costs by enabling the use of smaller generators and cabling.
  Manageability

  Intelligent Card Slot

  Customize UPS capabilities with management cards.

  LCD graphics display

  Text and mimic diagrams that display modes of operation, system parameters and alarms.

  LED Indicators

  Provide easy-to-read status of the unit and utility power conditions.

  Network manageable

  Most models provide remote power management options of the UPS over the network. Many do not have NMC embedded.

  Serial connectivity

  Provides management of the UPS via a serial port.
  Serviceability

  Predictive failure notification.

  Provides early-warning fault analysis ensuring proactive component replacement.

  Disconnected battery notification

  Warns when a battery is not available to provide backup power.

  Audible alarms

  Provides notification of changing utility power and UPS power conditions

  Automatic self-test

  Add to cart

  Quick View
• 

  APC 3kVA Smart-UPS , SRT3000XLI – Kenya

  KSh345,000.00

  3kVA APC Smart-UPS SRT 3000VA 230V SRT3000XLI 

  3kVA APC Smart-UPS SRT 3000VA 230V SRT3000XLI On Line is capable of supporting loads from 1 kVA to 10 kVA in a rack/tower convertible chassis. 6 kVA, 8 kVA, and 10 kVA models feature unity output power factor enabling them to support power hungry blade servers or heavily loaded equipment racks.

  APC Smart-UPS SRT 3000VA UPS business-critical systems require runtime in hours, not minutes, Smart UPS On Line can be configured with multiple battery packs to meet aggressive runtime demands. APC Smart-UPS SRT 3000VA UPS PowerChute Network Shutdown management software provides unattended graceful shutdown of network operating systems.

  APC Smart-UPS SRT 3000VA UPS Models 5 kVA to 10 kVA include an integrated network management card for remote management. APC Smart-UPS SRT 3000VA UPSSmart UPS On Line family helps to provide value to customers with demanding power conditions, including a very wide input voltage window, extremely tight output voltage regulation, frequency regulation, internal bypass, and input power factor correction.

  APC Smart-UPS SRT 3000VA UPS specifications
  Model: SRT3000XLI
  Power Capacity: 3000 VA / 2700 W
  Input Voltage: 230V
  Output Voltage: 230V
  UPS Topology: Double Conversion Online
  Rack Height: Tower or Rackmount (2U)
  Input Frequency Range: 40-70 Hz (auto sensing)
  Input Connection: Hard Wire 3-wire (1P+N+E).
  Output Connections:
  Hard Wire 3-wire (1P+N+E)
  IEC 320 C19 (2)
  IEC 320 C13 (8)
  Efficiency: Up to 93%
  Crest Factor: 3:1
  Battery Type: Maintenance-free sealed Lead-Acid battery with suspended electrolyte
  Typical Recharge Time: 3 hours
  Transfer Time: 0 ms
  Surge Protection: Yes
  Audible Alarm: Battery mode, low battery, overload, fault
  LED Indicators: Online, on battery, replace battery, overload.
  Communication Ports: USB, RS-232, SmartSlot, EPO
  Software: PowerChute Business Edition
  Dimensions (HxWxD): 86 x 432 x 660 mm
  Performance
  Apparent power (VA) 3000 VA
  Effective power (W) 2700 W
  Runtime (50 % load) up to 11.0 min.
  Runtime (100 % load) up to 4.0 min.
  General
  Technology Double conversion (online)
  Battery type VRLA (lead acid)
  Battery life 3 – 5 year(s)
  Duration Renewable
  Network
  SNMP / management Optional
  Physical properties
  Chassis type Tower / rack convertible.
  Dimensions (W x H x D) 85 x 432 x 635 mm
  Weight 32.0 kg
  Product type UPS for servers / network
  Lead time
  Usually in Stock
   
  General
  provided equipment
  CD with software Country-specific detachable power cord Documentation CD Installation guide Removable support feet USB cable Warranty card
   
  Physical
  cable length
  2.44 m
   
  colour
  Black
   
  depth
  63.5 cm
   
  height
  43.2 cm
   
  net weight
  31.3 kg
   
  width
  8.5 cm
   
  Input
  network frequency
  40…70 Hz auto-sensing
   
  plug standard
  BS1363A British IEC 60320 C20 Schuko CEE 7 / EU1-16P
   
  input voltage limits
  100…275 V adjustable (half load) 160…275 V
   
  inputvolt_other
  220 V 240 V
   
  input voltage
  230 V
   
  Output
  rated power in W
  2700 W
   
  Maximum configurable power in W
  2700 W
   
  harmonic distortion
  Less than 2 %
   
  output frequency
  50/60 Hz +/- 3 Hz sync to mains
   
  outputvolt_other
  220 V 240 V
   
  crest factor
  3 : 1
   
  UPS type
  Double conversion online
   
  Wave type
  Sine wave
   
  nb of power socket outlets
  8 IEC 60320 C13 2 IEC Jumpers 2 IEC 60320 C19
   
  bypass type
  Internal bypass (automatic and manual)
   
  output voltage
  230 V
   
  Conformance
  product certifications
  CE EAC RCM VDE
   
  standards
  EN/IEC 62040-1 EN/IEC 62040-2
   
  marking
  CE Mark
   
  Environmental
  ambient air temperature for operation
  0…40 °C
   
  relative humidity
  0…95 % non-condensing
   
  operating altitude
  0…10000 ft
   
  ambient air temperature for storage
  -15…45 °C
   
  storage altitude
  0.00…15240.00 m
   
  acoustic level
  55 dBA
   
  heat dissipation
  703 Btu/h
   
  IP degree of protection
  IP20
   
  Batteries & Runtime
  battery type
  Lead-acid battery
   
  Battery recharge time
  3 h
   
  number of battery replacement quantity
  1
   
  additional information
  Configurable for 220 : 230 or 240 nominal output voltage
   
  liquid value
  0
   
  battery voltage
  96 V
   
  Communications & Management
  free slots
  1
   
  control panel
  Multifunction LCD status and control console
   
  alarm
  Audible and visible alarms prioritized by severity
   
  Emergency power off
  Yes
   
  Surge Protection and Filtering
  Surge energy rate
  340 J
   
  Packing Units
  Package 1 Weight
  36.74 kg
   
  Package 1 Height
  24.6 cm
   
  Package 1 width
  59.9 cm
   
  Package 1 Length
  87.1 cm
   
  Number of Units in Package 3
  6
   
  Offer Sustainability

  Add to cart

  Quick View
• 

  APC 700VA Backup UPS, 700VA 230V AVR IEC Sockets 360Watts/700VA UPS, BX700UI – Kenya

  KSh13,935.00

  APC Back-UPS 700VA 230V AVR IEC Sockets 390Watts/700VA 

  APC Back-UPS 700VA 230V AVR IEC Sockets 390Watts/700VA powers your computer and electronic equipment during storms and outages. The BX700UI features Automatic Voltage Regulation (AVR).

  This feature instantly adjusts high and low voltage fluctuations to safe levels for connected electronics, saving battery power for when you need it most during storms and outages. Equipped with 4 IEC sockets, the 700 keeps your desktop computer, monitor or other critical devices (router, modem, television, etc.) running when the power goes out.

  Specifically designed for electronic equipment in harsh power environments, the Back-UPS 700 maximizes productivity and work efficiency while providing critical power during emergencies.

  APC Back-UPS 700VA UPS Specifications
  Capacity: 700VA / 390 Watts
  Input Voltage: 230V
  Output Voltage: 230V
  UPS Topology: Standby
  Waveform Type: Stepped approximation to a sinewave
  Transfer Time: 8 ms typical
  Input Connections: IEC-320 C14
  Output Connections: 4 x IEC 320 C13
  Battery Type: Sealed lead-acid
  Battery Runtime: Varies depending on the load
  Recharge Time: 8 hours
  Communication Ports: USB
  Interface Port: RJ-45 10/100 Base-T Ethernet
  Audible Alarms: On Battery, Low Battery, Overload, Replace Battery
  Surge Energy Rating: 273 Joules
  Operating Temperature: 0°C to 40°C (32°F to 104°F)
  Dimensions: 215mm x 130mm x 336mm (8.46** x 5.12** x 13.23**)
  Weight: 7.38 kg (16.26 lbs)
  Output
  Max Configurable Power (Watts)- 390Watts / 700VA
  Output Frequency (sync to mains)  50/60 Hz +/-1 Hz
  Topology -Line Interactive
  Waveform type- Stepped approximation to a sinewave
  Transfer Time – 4ms typical
  Input
  Input frequency – 50/60 Hz +/- 3 Hz (auto sensing)
  Input voltage range for main operations – 140 – 300V
  Number of Power Cords -1
  Batteries & Runtime
  Battery type  – Maintenance-free sealed Lead-Acid battery with suspended electrolyte : leakproof
  Typical recharge time – 6hour(s)
  Replacement Battery – BE650G2-GR
  Expected Battery Life (years) – 3 – 5
  RBC Quantity – 1
  Battery Volt-Amp-Hour Capacity – 84
  Runtime
   
   
  Communications & Management
  Interface Port(s) – USB
  Control panel – LED status display with On Line : On Battery : Replace Battery and Overload indicators
  Audible Alarm – Alarm when on battery : distinctive low battery alarm : overload continuous tone alarm
  Surge Protection and Filtering
  Surge energy rating – 273Joules
  Data Line Protection -RJ-11 Modem/Fax/DSL protection (two wire single line)
   
   
  Environmental
  Operating Temperature – 0 – 40 °C
  Operating Relative Humidity – 0 – 95 (non-condensing) %
  Operating Elevation – 0-3000meters
  Storage Temperature -15 – 40 °C
  Storage Relative Humidity 0 – 95 (non-condensing) %
  Storage Elevation – 0-9000meters
  Audible noise at 1 meter from surface of unit

  Add to cart

  Quick View