APC 650VA Easy UPS, battery backup UPS, BVS6501 – Kenya
KSh11,500.00
650VA Easy UPS-battery backup UPS BVS6501
650VA Easy UPS-battery backup UPS BVS6501 from the leading UPS dealer in Nairobi kenya, buy online Schneider 650VA Easy UPS-battery backup UPS BVS6501 and have it delivered at your doorstep.
Automatic Voltage Regulation (AVR) Automatically steps up low voltage and steps down high voltage to levels that are suitable for your equipment.
Wall-mount holes Allow flexibility for setup in tight locations and mounting on wall or other surfaces.
Easy UPS Features & Benefits
Safety-agency approved Ensures the product has been tested and approved to work safely with the connected service provider equipment and within the specified environment.
Audible alarms –Provides notification of changing utility power and UPS power conditions
LED Indicators Provide easy-to-read status of the unit and utility power conditions.
Transformer-block spaced outlets Protect equipment with input transformer blocks without blocking access to other receptacles.
Cold-start capable Provides temporary battery power when the utility power is out.
Sleek design Slim, modern design can be upright, flat, or wall-mounted to comfortably fit any electronics set-up and complement home décor.
APC 650VA Specifications
Capacity: 650VA/360W
Input voltage: 230V
Output voltage: 230V
Output connections: 3x IEC 320 C13
Input connection: IEC-320 C14
Output waveform: Stepped approximation to a sinewave
Transfer time: 6ms typical, 10ms maximum
Surge energy rating: 273 Joules
Battery type: Sealed, maintenance-free lead-acid
Typical recharge time: 6 hours
Backup runtime: Up to 12 minutes at half load, 3 minutes at full load
Audible noise: Less than 45 dBA at 1 meter distance
Operating temperature: 0°C to 40°C
Dimensions (H x W x D): 161 x 123 x 190 mm
Weight: 4.9 kg
Conclusion
The APC 650VA Easy UPS (BVS6501) is a compact and reliable battery backup UPS designed to provide backup power during outages and protect connected equipment from power disturbances. With a capacity of 650VA and 360W, it offers sufficient power to support critical devices such as computers, routers, and small electronics. The UPS features three IEC 320 C13 output connections, allowing you to connect multiple devices simultaneously.
Overview
Lead time
Usually in Stock
General
provided equipment
User manual
Number of power module free slots
0
Number of power module filled slots
0
redundant
No
UPS size
WS
Physical
cable length
1.50 m
colour
Black
depth
30.5 cm
height
9.25 cm
mounting preference
No preference
net weight
4.5 kg
mounting mode
Not rack-mountable
two post mountable
0
USB compatible
No
width
16.5 cm
Input
network frequency
50/60 Hz +/- 5 Hz auto-sensing
plug standard
BS1363A British
input voltage limits
170…280 V
number of cables
1
input voltage
230 V
Output
rated power in W
375 W
Maximum configurable power in W
375 W
output frequency
50/60 Hz +/- 1 Hz unsynchronised
UPS type
Line interactive
Wave type
Stepped approximation to a sinewave
nb of power socket outlets
4 universal receptacle
curve equation
Efficiency
curve fixed loss
0.0294
curve load maximum
100 %
curve load minimum
3 %
curve proportional loss
0
curve square loss
0.0021
curve X-axis maximum
100 %
curve test cond ID
Curve fit of data measured in accordance with the ENERGY STAR Test Method for Uninterruptible Power Supplies. All measurements taken in normal mode(s), at typical environmental conditions, with 230V/50Hz electrical input and balanced resistive load (PF = 1.0) output.
curve X-axis minimum
0 %
curve X-axis title
Load
curve X-axis units
Percentage
curve Y-axis maximum
100 %
curve Y-axis minimum
50 %
curve Y-axis title
Efficiency
curve Y-axis units
Percentage
graph display
1
output voltage
230 V
Maximum configurable power in VA
650 VA
rated power in VA
650 VA
Transfer time
6 ms typical : 10 ms maximum
Conformance
product certifications
CE
650VA Easy UPS-battery backup UPS BVS6501
650VA Easy UPS-battery backup UPS BVS6501 from the leading UPS dealer in Nairobi kenya, buy online Schneider 650VA Easy UPS-battery backup UPS BVS6501 and have it delivered at your doorstep.
Automatic Voltage Regulation (AVR) Automatically steps up low voltage and steps down high voltage to levels that are suitable for your equipment.
Wall-mount holes Allow flexibility for setup in tight locations and mounting on wall or other surfaces.
Easy UPS Features & Benefits
Safety-agency approved Ensures the product has been tested and approved to work safely with the connected service provider equipment and within the specified environment.
Audible alarms –Provides notification of changing utility power and UPS power conditions
LED Indicators Provide easy-to-read status of the unit and utility power conditions.
Transformer-block spaced outlets Protect equipment with input transformer blocks without blocking access to other receptacles.
Cold-start capable Provides temporary battery power when the utility power is out.
Sleek design Slim, modern design can be upright, flat, or wall-mounted to comfortably fit any electronics set-up and complement home décor.
APC 650VA Specifications
Capacity: 650VA/360W
Input voltage: 230V
Output voltage: 230V
Output connections: 3x IEC 320 C13
Input connection: IEC-320 C14
Output waveform: Stepped approximation to a sinewave
Transfer time: 6ms typical, 10ms maximum
Surge energy rating: 273 Joules
Battery type: Sealed, maintenance-free lead-acid
Typical recharge time: 6 hours
Backup runtime: Up to 12 minutes at half load, 3 minutes at full load
Audible noise: Less than 45 dBA at 1 meter distance
Operating temperature: 0°C to 40°C
Dimensions (H x W x D): 161 x 123 x 190 mm
Weight: 4.9 kg
Conclusion
The APC 650VA Easy UPS (BVS6501) is a compact and reliable battery backup UPS designed to provide backup power during outages and protect connected equipment from power disturbances. With a capacity of 650VA and 360W, it offers sufficient power to support critical devices such as computers, routers, and small electronics. The UPS features three IEC 320 C13 output connections, allowing you to connect multiple devices simultaneously.
Overview
Lead time
Usually in Stock
General
provided equipment
User manual
Number of power module free slots
0
Number of power module filled slots
0
redundant
No
UPS size
WS
Physical
cable length
1.50 m
colour
Black
depth
30.5 cm
height
9.25 cm
mounting preference
No preference
net weight
4.5 kg
mounting mode
Not rack-mountable
two post mountable
0
USB compatible
No
width
16.5 cm
Input
network frequency
50/60 Hz +/- 5 Hz auto-sensing
plug standard
BS1363A British
input voltage limits
170…280 V
number of cables
1
input voltage
230 V
Output
rated power in W
375 W
Maximum configurable power in W
375 W
output frequency
50/60 Hz +/- 1 Hz unsynchronised
UPS type
Line interactive
Wave type
Stepped approximation to a sinewave
nb of power socket outlets
4 universal receptacle
curve equation
Efficiency
curve fixed loss
0.0294
curve load maximum
100 %
curve load minimum
3 %
curve proportional loss
0
curve square loss
0.0021
curve X-axis maximum
100 %
curve test cond ID
Curve fit of data measured in accordance with the ENERGY STAR Test Method for Uninterruptible Power Supplies. All measurements taken in normal mode(s), at typical environmental conditions, with 230V/50Hz electrical input and balanced resistive load (PF = 1.0) output.
curve X-axis minimum
0 %
curve X-axis title
Load
curve X-axis units
Percentage
curve Y-axis maximum
100 %
curve Y-axis minimum
50 %
curve Y-axis title
Efficiency
curve Y-axis units
Percentage
graph display
1
output voltage
230 V
Maximum configurable power in VA
650 VA
rated power in VA
650 VA
Transfer time
6 ms typical : 10 ms maximum
Conformance
product certifications
CE
Related products
-
Add to cartAPC Smart UPS C2000 VALCD 230V 1300 Watt 2000VA
APC Smart-UPS C 2000VA LCD, 230V with model no. SMC2000I and maximum output capacity of 1300 watts is ideal UPS for top efficiency power back. This UPS is reputed for outstanding quality and great performance.
APC Smart-UPS is the UPS of choice, trusted for best backup performance and dependable equipment protection. for load below 1300 watts, the APC Smart-UPS C 2000VA (SMC2000I) is what you need.
APC Smart UPS C2000 VALCD 230V 1300 Watt 2000VA has excellent features to protect your equipment and deliver the power backup you require. With its boost and trim Automatic Voltage Regulation (AVR) function, your equipment gets extended power supply (lower voltage is regulated to supply your equipment).
They also get protection from over-voltage. Put differently, APC Smart-UPS C 2000VA (SMC2000I) ensures higher application availability by correcting low and high voltage conditions without using the battery.
APC Smart-UPS C 2000VA LCD UPS specifications
Capacity: 2000VA / 1300 Watts
Input Voltage: 230V
Output Voltage: 230V
UPS Topology: Line Interactive
Waveform Type: Sine wave
Transfer Time: 2-6 ms typical
Input Connection: IEC-320 C14
Output Connections: 6 x IEC 320 C13
Battery Type: Sealed lead-acid
Battery Runtime: Varies depending on the load
Recharge Time: 3 hours
Communication Ports: SmartSlot, USB
Interface Port: RJ-45 10/100 Base-T Ethernet, USB Type-B
LCD Display: Yes
Audible Alarms: Battery Backup, Low Battery, Overload, Replace Battery
Surge Energy Rating: 459 Joules
Operating Temperature: 0°C to 40°C (32°F to 104°F)
Dimensions: 219mm x 171mm x 439mm (8.6** x 6.7** x 17.3**)
Weight: 21.5kg (47.4 lbs)Conclusion
The APC 2000VA Smart UPS offers reliable power protection for critical equipment. With its LCD display, it provides convenient monitoring of UPS status and power conditions. It also features multiple communication ports for enhanced connectivity and management.
-
Add to cartAPC Easy UPS On-Line SRV 3000VA Smart UPS, SRV3KRILRK
APC Single phase Easy UPS is designed for IT professionals or network administrators to maintain business uptime and continuity. This 3kVA double-conversion on-line 4U rackmount UPS provides pure sine wave power and extended runtime to support critical electronics during power disruptions.
The SRV comes with IEC 320 C20 input and 4x Brazilian 2P+T outlets. The On-Line UPS has a intelligent card slot for optional Network Management Card (AP9544, SRVSMB001, VGL9601l) that enables network-based UPS monitoring and management. The UPS can connect to EcoStruxure IT or third-party centralized management platforms.
The Built-in automatic and manual bypass provide seamless power to the load even in the event of an internal detected fault or error in UPS. The UPS and the built-in lead-acid battery has a 2-year warranty. Ideal for small data centers, manufacturing facilities, computer rooms, network storage devices, telecommunication, and healthcare IT.
High quality, Double-conversion On-line UPS designed for essential power protection needs even in the most unstable power conditions.
Includes: Basic UPS signalling RS-232 cable, CD with software, Rack mounting brackets, Rack mounting support rails, USB cable, User manual.
SRV3KRILRK specifications
Model: APC Easy UPS On-Line SRV 3000VA Smart UPS (SRV3KRILRK)
Power Capacity: 3000VA / 2700W
Input Voltage: 220V, 230V, 240V (Selectable)
Output Voltage: 220V, 230V, 240V (Configurable)
UPS Topology: Double-conversion online
Input Connection: Hardwired
Output Connections: Multiple IEC C13 and C19 outlets
Battery Type: Sealed Lead Acid (Maintenance-free)
Battery Runtime: Varies depending on load and battery configuration
Interface Ports: USB, RS-232, SmartSlot for optional management card
Alarm Notifications: Audible alarms, LED indicators, and optional network management card for remote monitoring
Form Factor: Rack-mountable (2U)
Transfer Time: Zero transfer time to battery during power outages
Efficiency: High efficiency mode for energy savings
Automatic internal bypass
Pure static bypass switch without bridging contactor securing a fast and reliable transfer to and from bypass, rated for 125% nominal load.
Automatic restart of loads after UPS shutdown
Automatically starts up the connected equipment upon the return of utility power.
ECO Mode
Operating mode that by-passes unused electrical components in good power conditions to achieve high operating efficiency without sacrificing protection
Input power factor correction
Minimizes installation costs by enabling the use of smaller generators and cabling.
Intelligent battery management
Maximizes battery performance, life, and reliability through intelligent, precision charging.
Intelligent Card Slot
Customize UPS capabilities with management cards.
LCD graphics display
Text and mimic diagrams that display modes of operation, system parameters and alarms.
Serial connectivity
Provides management of the UPS via a serial port.
USB connectivity
Provides management of the UPS via a USB port (not available on all models).
Easy UPS On-Line Features & Benefits
AvailabilityIntelligent battery management
Maximizes battery performance, life, and reliability through intelligent, precision charging.
FeaturesSafety-agency approved
Ensures the product has been tested and approved to work safely with the connected service provider equipment and within the specified environment.
Allows the user to manage the UPS functions, schedule automatic shutdown and monitor the power grid occurrences through an interactive interface that ensures an easy and intuitive monitoring.
Management Software
Double conversion on-line topology
Guarantees a consistently high level of power quality. Any disturbances on the distribution waveform are regenerated via the zero transfer time AC to DC then DC to AC conversion process. The battery is only used as a back-up source.
Management Software
Allows you to easily monitor your utility power and manage your UPS.
Pure sine wave output on battery
Simulates utility power to provide the highest degree of compatibility for active PFC (power factor corrected) servers and sensitive electronics.
Intuitive LCD interface
Provides clear and accurate information in multiple languages with the ability to configure the UPS locally with easy to use navigation keys.
ECO Mode
Operating mode that by-passes unused electrical components in good power conditions to achieve high operating efficiency without sacrificing protection
Generator compatible
Ensures clean, uninterrupted power to protected equipment when generator power is used.
High efficiency
High efficiency rates that remain stable even at lower operating power levels
Input power factor correction
Minimizes installation costs by enabling the use of smaller generators and cabling.
ManageabilityIntelligent Card Slot
Customize UPS capabilities with management cards.
LCD graphics display
Text and mimic diagrams that display modes of operation, system parameters and alarms.
LED Indicators
Provide easy-to-read status of the unit and utility power conditions.
Network manageable
Most models provide remote power management options of the UPS over the network. Many do not have NMC embedded.
Serial connectivity
Provides management of the UPS via a serial port.
ServiceabilityPredictive failure notification.
Provides early-warning fault analysis ensuring proactive component replacement.
Disconnected battery notification
Warns when a battery is not available to provide backup power.
Audible alarms
Provides notification of changing utility power and UPS power conditions
Automatic self-test
-
APC 20KVA EASY UPS, E3SUPS20KHB2 3S 20KVA 400V 3:3 10 MIN 3 Phase UPS, E3SUPS20KHB2 – Kenya
KSh1,900,000.00Add to cartAPC 20KVA EASY UPS, E3SUPS20KHB2 3S 20KVA 400V 3:3 10 MIN 3 Phase UPS, E3SUPS20KHB2
The Schneider Electric Easy UPS 3 Series is an easy-to-install, easy-to-connect, easy-to-use, and easy-to-service 10-200 kVA 3 phase UPS ideal for small and medium businesses, data centers, and other mission critical applications.
The Schneider Electric Easy UPS 3 Series brings predictability to utility costs by delivering up to 96 percent efficiency in double conversion mode and up to 99 percent efficiency in energy-saving ECO mode, thanks to its advanced product features, competitive specifications, and robust electrical design. It is exceptionally easy to install, connect, operate, maintain, and service, making it ideal for a wide range of small and medium business applications.
This EcoStruxure™ Ready UPS features a wide operating temperature range and strong overload protection, all in a compact and lightweight footprint. Start-up service* optimizes your system’s performance, quality, and safety. The Easy UPS 3 Series is the easy choice for your business continuity in the data center or electrical room.
Rolls into position quickly and easily
Minimal footprint requirement with lightweight, compact form factor
Straightforward installation
Input, output, and bypass breakers are included
Emergency Power Off (EPO) switch is included
Easy Loop test verifies UPS performance before you connect your load, without the need for a load bank
Aesthetic design blends well into your installation environment
On-site start-up** with Schneider Electric Field Service Representatives -
Add to cartAPC Back-UPS 1400VA 230V AVR IEC Sockets 700Watts/1.4kVA
APCs Back-UPS 1400 protect your electronic equipment from damage due to power outages, surges and spikes while providing short term battery power during an outage.
The Back-UPS 1400 features Automatic Voltage Regulation (AVR),which instantly adjusts high and low voltage fluctuations to safe levels for your electronics, saving battery power for when you need it most during storms and power outages. Additionally, Australian sockets make for easy-to-use connection of protected equipment.
APC 1400VA UPS Specification
Capacity: 1400VA / 700 Watts
Input Voltage: 230V
Output Voltage: 230V
UPS Topology: Standby
Waveform Type: Stepped approximation to a sinewave
Transfer Time: 4 ms typical
Input Connections: IEC-320 C14
Output Connections: 6 x IEC 320 C13
Battery Type: Sealed lead-acid
Battery Runtime: Varies depending on the load
Recharge Time: 10 hours
Communication Ports: USB
Interface Port: RJ-45 10/100 Base-T Ethernet
Audible Alarms: On Battery, Low Battery, Overload, Replace Battery
Surge Energy Rating: 273 Joules
Operating Temperature: 0°C to 40°C (32°F to 104°F)
Dimensions: 215mm x 130mm x 336mm (8.46** x 5.12** x 13.23**)
Weight: 12.5 kg (27.56 lbs)Conclusion
The APC 1400VA Backup UPS provides reliable backup power and surge protection for your electronic devices. It features Automatic Voltage Regulation (AVR) to stabilize the input voltage and protect your equipment from voltage fluctuations.
The UPS has multiple IEC output sockets to accommodate your devices. With its USB communication port, you can connect the UPS to your computer for monitoring and management.
-
Add to cartAPC 1KVA Smart-UPS, 600Watts/1000VA, Input 230V/Output 230V,Interface Port USB, Rack Height 2U Rackmount UPS, SMC1000I-2U
APC Smart-UPS,600 Watts /1000 VA,Input 230V /Output 230V, Interface Port USB, Rack Height 2 U Includes: CD with software, Documentation CD, Installation guide, Rack Mounting brackets, USB cable Standard Lead Time: Usually Ships within 2 Weeks.
The APC SMC1000I-2U Smart-UPS is a rackmount UPS with a power capacity of 600 Watts / 1000 VA. It provides reliable backup power and protection for critical electronics in server rooms and network closets. With its 2U rack height and USB interface port, it is designed to fit seamlessly into your rack-mounted setup.
The UPS features 8 outlets with IEC 320 C13 connectors to accommodate your devices. It delivers a pure sine wave output for compatibility with sensitive equipment. The UPS has a built-in battery that can provide backup power for up to 18.5 minutes at half load and 5.9 minutes at full load. It offers surge protection with a surge energy rating of 459 Joules.
APC 1KVA Smart-UPS Specifications
Model: SMC1000I-2U
Power Capacity: 600 Watts / 1000 VA
Input Voltage: 230V
Output Voltage: 230V
Rack Height: 2U
Interface Port: USB
Number of Outlets: 8
Outlet Type: IEC 320 C13
Waveform Type: Sine wave
Nominal Input/Output Frequency: 50/60 Hz
Input Voltage Range: 160-286V
Output Voltage Regulation: ± 3%
Transfer Time: 6 ms typical, 10 ms maximum
Battery Type: Maintenance-free, sealed lead-acid battery with suspended electrolyte
Typical Backup Time at Half Load: 18.5 minutes
Typical Backup Time at Full Load: 5.9 minutes.
Surge Energy Rating: 459 Joules
Maximum Height: 86 mm
Maximum Width: 432 mm
Maximum Depth: 457 mm
Weight: 20.91 kg
Audible Alarm: Alarm when on battery, low battery, and overload
LED Indicators: Online, On Battery, Replace Battery
Communication Ports: USB
Software: PowerChute Business Edition
FeaturesUPS topology Line-Interactive
Output power capacity 1 kVA
Output power 600 W
Waveform Sine
Input operation voltage (min) 180 V
Input operation voltage (max) 287 V
Input frequency 50/60 Hz
Output frequency regulation 57 – 63 Hz
Automatic Voltage Regulation (AVR)Surge energy rating 459 J
Hold time (max) 2 ms
Noise level 42 dB
Audible alarm(s)Auto-restart
Ports & interfaces
AC outlet types C13 coupler
Power plug C14 coupler
AC outlets quantity 4 AC outlet(s)
Number of output IEC jumpers 2
USB portBattery
Battery technology Sealed Lead Acid (VRLA)
Battery capacity 170 VAh
Battery life (max) 6 year(s)
Battery recharge time 3 h
Hot-swap batteryAutomatic battery test
Cold start
Replacement battery cartridge APCRBC124
Design
Form factor Rackmount
Product colour Black
Rack capacity 2U
Display type LCD
Certification REACH, C-tick, CE, GOST, UL 1778, VDEOperational conditions
Operating temperature (T-T) 0 – 40 °C
Storage temperature (T-T) -15 – 45 °C
Operating relative humidity (H-H) 0 – 95%
Storage relative humidity (H-H) 0 – 95%
Operating altitude 0 – 3000 m
Non-operating altitude 0 – 15000 mTechnical details
Sustainability certificates RoHS
Weight & dimensions
Width 432 mm
Depth 406 mm
Height 89 mm
Weight 20.5 kg
Package width 546 mm
Package depth 584 mm
Package height 241 mm
Package weight 22.3 kgPackaging data
Rack mount kit
Cables included USB cable
Quick installation guideSoftware CD
Logistics data
Products per pallet 16 pc(s)
Other features
Nominal output voltage 230 V
Nominal input voltage 230 V