APC 750VA Smart Value, SMV750I-MS UPS – Kenya

Related products

• 

  APC Smart-UPS VT 40kVA 400V SUVTP40KH4B4S UPS Kenya – Kenya

  KSh2,000,000.00

  APC Smart-UPS VT 40kVA 400V SUVTP40KH4B4S UPS Kenya 

  APC Smart-UPS VT 40kVA 400V SUVTP40KH4B4S UPS Kenya Provides fast serviceability and reduced maintenance requirements via self-diagnosing, field-replaceable modules.

   

  40kVA 400V SUVTP40KH4B4S UPS Gives higher application availability by correcting poor frequency and voltage conditions without using the battery. APC Smart-UPS VT 40kVA Enables pre-installation UPS staging and testing and faster installation.

   

  APC Smart-UPS VT 40kVA Increases availability by allowing the UPS to be connected to two separate power sources. SUVTP40KH4B4S APC Smart-UPS VT 40kVA 400V w/4 Batt.

   

  Mod., Start-Up 5X8, Internal Maint Bypass, Parallel Capability Battery modules ship installed , Bolt down brackets , CD with software , Installation guide , Network Management Card , Power modules ship installed , Start up included , User.

  APC Smart-UPS VT 40kVA 400V w/4 Batt. Mod., Start-Up 5X8, Internal Maint Bypass, Parallel Capability

  Parallel-capacity capable
  Increases total power capacity by using multiple uninterruptible power supplies simultaneously.
  Parallel-redundant capable
  Power the connected equipment with multiple uninterruptible power supplies to increase system redundancy
  Smart-UPS VT Features & Benefits
  Availability
  Battery modules connected in parallel
  Delivers higher availability through redundant batteries.
  Automatic internal bypass
  Supplies utility power to the connected loads in the event of a UPS power overload or fault.
  Dual mains input
  Increases availability by allowing the UPS to be connected to two separate power sources.
  Generator compatible
  Ensures clean, uninterrupted power to protected equipment when generator power is used.
  Scalable runtime
  Allows additional run time to be quickly added as needed.
  Manageability
  Programmable frequency
  Ensures compatibility with different input frequencies.
  Audible alarms
  Provides notification of changing utility power and UPS power conditions
  LCD display
  Alpha-Numeric Display which displays system parameters and alarms.
  SmartSlot
  Customize UPS capabilities with management cards.
  InfraStruXure Manager Compatible
  Enables centralized management via the APC InfraStruXure Manager.
  Network manageable
  Provides remote power management of the UPS over the network.
  LED status indicators
  Quickly understand unit and power status with visual indicators.
  Total Cost of Ownership
  Temperature-compensated battery charging
  Prolongs battery life by regulating the charge voltage according to battery temperature.
  Manual maintenance bypass
  Reduces installation costs by eliminating the need for an external mechanical bypass.
  Intelligent battery management
  Maximizes battery performance, life, and reliability through intelligent, precision charging.
  Input power factor correction
  Minimizes installation costs by enabling the use of smaller generators and cabling.
  Sustainability
  EU CoC for UPS
  Ensures that UPSs sold in the EU are highly efficient
  Protection
  Cold-start capable
  Provides temporary battery power when the utility power is out.
  Safety-agency approved
  Ensures the product has been tested and approved to work safely with the connected service provider equipment and within the specified environment.
  Frequency and voltage regulation
  Gives higher application availability by correcting poor frequency and voltage conditions without using the battery.
  Marketing Features
  Hot-swappable batteries
  Ensures clean, uninterrupted power to protected equipment while batteries are being replaced
  Input power factor correction
  Minimizes installation costs by enabling the use of smaller generators and cabling.
  Dual mains input
  Increases availability by allowing the UPS to be connected to two separate power sources.
  Scalable runtime
  Allows additional run time to be quickly added as needed.
  Network manageable
  Provides remote power management of the UPS over the network.
  Manual maintenance bypass
  Reduces installation costs by eliminating the need for an external mechanical bypass.
  Serviceability
  Modular design
  Provides fast serviceability and reduced maintenance requirements via self-diagnosing, field-replaceable modules.
  Battery replacement without tools
  Enables fast battery replacement, lowering Mean Time to Repair (MTTR).
  Automatic self-test
  Periodic battery self-test ensures early detection of a battery that needs to be replaced.
  Shippable with modules installed
  Enables pre-installation UPS staging and testing and faster installation.
  40kva UPS Battery Backup specifications

  Output

  Output Power Capacity: 32.0 KW / 40.0 kVA
  Max Configurable Power (Watts): 32.0 KW / 40.0 kVA
  Nominal Output Voltage: 400V 3PH
  Output Voltage Note: Configurable for 380 : 400 or 415 V 3 Phase nominal output voltage
  Efficiency at Full Load: 95.8 %
  Output Voltage Distortion: Less than 5% at full load
  Output Frequency (sync to mains): 47 – 53 Hz for 50 Hz nominal
  Output Frequency (not synced): 50Hz +/- 0.1% for 50Hz nominal
  Other Output Voltages: 380, 415
  Crest Factor: 3 : 1
  Topology: Double Conversion Online
  Waveform Type: Sine wave
  Maximum Output Current: 64
  Bypass: Built-in Maintenance Bypass, Built-in Static Bypass

  Input

  Nominal Input Voltage: 400V 3PH
  Input Frequency: 40- 70 Hz (auto sensing)
  Input Connections: Hard Wire 5-wire (3PH + N + G)
  Input voltage range for main operations: 304 – 477 V
  Other Input Voltages: 380 , 415
  Efficiency at Full Load: 95.8 %
  Maximum Input Current: 55 A
  Input Power Factor at Full Load: 0.98

  Batteries & Runtime

  Battery Type: VRLA
  Included Battery Modules: 4
  Typical recharge time: 5 hour(s)
  Nominal Battery Voltage: +/-192 V (split battery referenced to neutral)
  Expected Battery Life (years): 3 – 5
  RBC Quantity: 4
  Extendable Run Time: 1
  End of Discharge Battery Voltage: +/-154 V

  Communications & Management

  Interface Port(s): DB-9 RS-232, Smart-Slot
  Pre-Installed SmartSlot™ Cards: AP9631
  Control panel: Multi-function LCD status and control console
  Audible Alarm: Audible and visible alarms prioritized by severity
  Emergency Power Off (EPO): Yes

  Physical

  Maximum Height: 1490.0 mm
  Maximum Width: 523.0 mm
  Maximum Depth: 842.0 mm
  Net Weight: 629.09kg
   
   

  Add to cart

  Quick View
• 

  2kVA APC Smart-UPS, 2000VA, LCD 230V, SMC2000I-2U UPS – Kenya

  KSh175,000.00

  2kVA APC Smart-UPS C 2000VA LCD 230V SMC2000I-2U UPS

  2kVA APC Smart-UPS C 2000VA LCD 230V SMC2000I-2U UPS maximum output capacity of 1300 watts is ideal UPS for top efficiency power back. APC by Schneider Electric is reputed for outstanding quality and great performance. APC Smart-UPS is the UPS of choice, trusted for best backup performance and dependable equipment protection.

  for load below 1300 watts, the APC Smart-UPS C 2000VA (SMC2000I) is what you need. APC Smart-UPS C 2000VA has excellent features to protect your equipment and deliver the power backup you require. With its boost and trim Automatic Voltage Regulation (AVR) function, your equipment gets extended power supply (lower voltage is regulated to supply your equipment).

  APC Smart-UPS C 2000VA (SMC2000I) ensures higher application availability by correcting low and high voltage conditions without using the battery. SMC2000I-2U UPS there is the power conditioning function of this APC UPS. With power conditioning, the UPS protects connected loads from surges, spikes, lightning, and other power disturbances.

  SMC2000I-2U UPS gives notification you need for low battery status with the distinctive low battery alarm of the APC Smart-UPS C 2000VA. Best of all, APC Smart-UPS C 2000VA (SMC2000I) intelligent battery management system will help give your battery the extended battery life APC promises.

  This product has a battery life expectancy of 3 – 5 years, all things being equal. APC Smart-UPS C 2000VA (SMC2000I) a multifunction LCD status and control console. View LCD displays that report the status of the equipment to help you get the best out of your UPS.

  APC Smart-UPS C 2000VA (SMC2000I) specifications
  Main
  acoustic level
  42 dBA

  battery curve
  A

  battery type
  Lead-acid battery

  product certifications
  C-Tick CE EAC GOST IRAM SABS VDE

  curve equation
  Efficiency

  curve load maximum
  100 %

  curve X-axis maximum
  100 %

  curve X-axis minimum
  0 %

  curve X-axis title
  Load

  curve X-axis units
  Percentage

  curve Y-axis maximum
  100 %

  curve Y-axis minimum
  50 %

  curve Y-axis title
  Efficiency

  curve Y-axis units
  Percentage

  equipment protection policy
  Lifetime : $150000

  extended runtime
  0

  Maximum configurable power in VA
  2000 VA

  Maximum configurable power in W
  1300 W

  liquid value
  0

  marking
  GS Mark

  mounting location
  Front

  mounting mode
  Rack-mounted

  mounting preference
  Lower

  number of battery filled slots
  0

  number of battery free slots
  0

  Battery recharge time
  3 h

  number of battery replacement quantity
  1

  depth
  47 cm

  free slots
  0

  height
  8.9 cm

  number of cables
  1

  performance multiplier
  1

  Number of power module filled slots
  0

  Number of power module free slots
  0

  net weight
  26.2 kg

  rated power in VA
  2000 VA

  rated power in W
  1300 W

  Surge energy rate
  300 J

  Number of tare power
  26 W

  width
  48 cm

  noise suppression
  Full time multi-pole noise filtering : 0.3% IEEE surge let-through : zero clamping response time : meets UL 1449

  number of rack unit
  2U

  operating altitude
  0…10000 ft

  ambient air temperature for operation
  0…40 °C

  battery life
  3…5 year(s)

  ambient air temperature for storage
  -15…45 °C

  storage altitude
  0.00…15240.00 m

  Transfer time
  8 ms typical : 10 ms maximum

  size UPS version
  Internetworking Server Telecom

  UPS size
  S

  UPS type
  Line interactive

  Wave type
  Sine wave

  graph display
  1

  redundant
  No

  show note OP temperature
  No

  two post mountable
  1

  Yes

  colour
  Black

  input voltage limits
  180…287 V

  input voltage
  230 V

  battery charger power
  144 W rated

  nb of power socket outlets
  6 IEC 320 C13 2 IEC Jumpers

  network frequency
  50/60 Hz +/- 3 Hz auto-sensing

  output voltage
  230 V

  plug standard
  IEC 320 C20

  provided equipment
  CD with software Documentation CD Installation guide Rack mounting brackets USB cable

  relative humidity
  0…95 %

  Battery power in VAH
  432 VAh runtime

  product web sub-family
  Entry level

  value multiplier
  1

  harmonic distortion
  Less than 5 %

  Environment
  heat dissipation
  81 Btu/h

  Output
  output frequency
  50 Hz sync to mains

  Communications & Management
  control panel
  Multifunction LCD status and control console

  alarm
  Alarm when on battery : distinctive low battery alarm : configurable delays

  Packing Units
  Package 1 Weight
  30.16 kg

  Package 1 Height
  25 cm

  Package 1 width
  59 cm

  Package 1 Length
  60 cm

  Number of Units in Package 3
  16

  Offer Sustainability
  Sustainable offer status
  Green Premium product

  REACh free of SVHC
  Yes

  EU RoHS Directive
  Compliant EU RoHS Declaration

  Mercury free
  Yes

  RoHS exemption information
  Yes

  WEEE
  The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins

  Add to cart

  Quick View
• 

  APC 3Kva Smart-UPS 3000VA LCD 230V SMT3000 UPS – Kenya

  KSh280,000.00

  3Kva APC Smart-UPS 3000VA LCD 230V SMT3000 UPS 

  3Kva APC Smart-UPS 3000VA LCD 230V SMT3000 UPS Intelligent and efficient network power protection from entry level to scaleable runtime. Ideal UPS for servers, point-of-sale, routers, switches.

  APC Smart-UPS 3000VA LCD 230V UPS Includes: CD with software, Documentation CD, Installation guide, Rack Mounting brackets, USB cable. SMT3000 UPS Patent-pending operating mode that bypasses unused electrical components in good power conditions to achieve very high operating efficiency without sacrificing any protection.

  SMT3000 UPS Provides key UPS status at a glance. Multiple status indicators with load and battery bar graphs. APC Smart-UPS 3000VA LCD 230V UPS Simulates utility power to provide the highest degree of compatibility for active PFC (power factor corrected) servers and sensitive electronics.

  3000VA LCD 230V UPS Provides the ability to adapt the UPS for optimal performance in specific power environments or generator applications. 3000VA LCD 230V UPS Increases availability by allowing a trained user to perform upgrades and replacements of the batteries reducing Mean Time to Repair (MTTR)

  APC Smart-UPS 3000VA LCD 230V UPS Specifications
  Brand: APC
  Model: Smart-UPS SMT3000 or similar
  Capacity: 3000VA (3kVA)
  Topology: Online double-conversion
  Output Power Capacity: 2700 Watts / 3000 VA
  Input Voltage: 230V
  Output Voltage: 230V
  Input Connection:
  NEMA L6-20P or similar (depending on the region)
  IEC-320 C20
  Output Connections:
  8 x IEC 320 C13
  1 x IEC 320 C19
  Interface Ports:
  USB
  Serial
  SmartSlot for optional network management card
  LCD Display: Yes, for real-time status and configuration information
  Battery Type: Maintenance-free, sealed lead-acid battery with suspended electrolyte
  Typical Recharge Time: 3 hours
  Runtime: Varies based on load
  Surge Energy Rating: Provides surge protection for connected equipment
  Automatic Voltage Regulation (AVR): Yes
  Audible Alarm: Indicates battery and unit status
  Communication and Management:
  USB connectivity
  Serial connectivity
  SmartSlot for optional network management card
  Software: Compatible with APC’s PowerChute software for graceful shutdown
  Dimensions: Specific dimensions not provided
  Weight: Specific weight not provided
  Operating Temperature: Specific operating temperature range not provided
  Operating Relative Humidity: Specific humidity range not provided
  Audible Noise at 1 Meter from Surface of Unit: Specific noise level not provided
  EMI/RFI Noise Filtering: Yes
  Safety Certifications:
  CE
  GOST
  EN 50091-2
  VDE
  Environmental Compliance: RoHS

   

  acoustic level
  55 dBA
   
  battery curve
  D
   
  battery type
  Lead-acid battery
   
  battery voltage
  192 V
   
  bypass type
  Internal bypass (automatic and manual)
   
  product certifications
  CE EAC IRAM RCM VDE
   
  crest factor
  3 : 1
   
  curve equation
  Efficiency
   
  curve fixed loss
  0.0142
   
  curve load maximum
  100 %
   
  curve load minimum
  2 %
   
  curve proportional loss
  0.0236
   
  curve square loss
  0.0247
   
  curve test cond ID
  Curve fit of data measured in accordance with the ENERGY STAR Test Method for Uninterruptible Power Supplies. All measurements taken in normal mode(s), at typical environmental conditions, with 230V/50Hz electrical input and balanced resistive load (PF = 1.0) output.
   
  curve X-axis maximum
  100 %
   
  curve X-axis minimum
  0 %
   
  curve X-axis title
  Load
   
  curve X-axis units
  Percentage
   
  curve Y-axis maximum
  100 %
   
  curve Y-axis minimum
  50 %
   
  curve Y-axis title
  Efficiency
   
  curve Y-axis units
  Percentage
   
  Emergency power off
  Yes
   
  extended runtime
  1
   
  Maximum configurable power in VA
  5000 VA
   
  Maximum configurable power in W
  4500 W
   
  liquid value
  0
   
  marking
  CE Mark
   
  mounting location
  Front
   
  mounting mode
  Rack-mounted with kit
   
  mounting preference
  No preference
   
  number of battery filled slots
  2
   
  number of battery free slots
  0
   
  Battery recharge time
  1.5 h
   
  number of battery replacement quantity
  1
   
  depth
  71.94 cm
   
  free slots
  1
   
  height
  43.2 cm
   
  Number of power module filled slots
  0
   
  Number of power module free slots
  0
   
  net weight
  54.43 kg
   
  rated power in VA
  5000 VA
   
  rated power in W
  4500 W
   
  Surge energy rate
  480 J
   
  Number of tare power
  78 W
   
  width
  13 cm
   
  operating altitude
  0…10000 ft
   
  ambient air temperature for operation
  0…40 °C
   
  battery life
  3…5 year(s)
   
  ambient air temperature for storage
  -15…45 °C
   
  storage altitude
  0.00…15240.00 m
   
  standards
  EN/IEC 62040-1 EN/IEC 62040-2
   
  UPS size
  S
   
  UPS type
  Double conversion online
   
  Wave type
  Sine wave
   
  graph display
  1
   
  redundant
  No
   
  show note OP temperature
  No
   
  two post mountable
  0
   
   
  Yes
   
  colour
  Black
   
  number of input connectors
  1 hard wire 3-wire (1P + N + E)
   
  input voltage
  230 V
   
  input voltage limits
  100…275 V adjustable (half load) 160…275 V
   
  IP degree of protection
  IP20
   
  battery charger power
  560 W rated
   
  nb of power socket outlets
  6 IEC 60320 C13 2 IEC Jumpers 4 IEC 60320 C19
   
  network frequency
  40…70 Hz auto-sensing
   
  output voltage
  230 V
   
  provided equipment
  CD with software Communication cable Documentation CD Installation guide Removable support feet Temperature probe USB cable Warranty card Web/SNMP management card
   
  relative humidity
  0…95 % non-condensing
   
  battery option
  SRT192BP 1 2535 VAh SRT192BP 2 4225 VAh SRT192BP 3 5915 VAh SRT192BP 4 7605 VAh SRT192BP 5 9295 VAh SRT192BP 6 10985 VAh SRT192BP 8 14365 VAh SRT192BP 10 17745 VAh
   
  Battery power in VAH
  845 VAh runtime
   
  inputvolt_other
  220 V 240 V
   
  outputvolt_other
  220 V 240 V
   
  product web sub-family
  High density
   
  harmonic distortion
  Less than 2 %
   
  Environment
  heat dissipation
  931 Btu/h
   
  Output
  output frequency
  50/60 Hz +/- 3 Hz sync to mains
   
  Communications & Management
  control panel
  Multifunction LCD status and control console
   
  alarm
  Audible and visible alarms prioritized by severity
   
  Packing Units
  Package 1 Weight
  63.6 kg
   
  Package 1 Height
  33 cm
   
  Package 1 width
  61 cm
   
  Package 1 Length
  96 cm
   
  Number of Units in Package 3
  6
   
  Offer Sustainability
  Sustainable offer status
  Green Premium product
   
  REACh free of SVHC
  Yes
   
  EU RoHS Directive
  Compliant EU RoHS Declaration
   
  Mercury free
  Yes
   
  RoHS exemption information
  Yes
   
  WEEE
  The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins
   
  Optimized Energy Efficiency
  Energy efficient product
  Environment
  heat dissipation
  931 Btu/h
   
  Output
  output frequency
  50/60 Hz +/- 3 Hz sync to mains
   
  Communications & Management
  control panel
  Multifunction LCD status and control console
   
  alarm
  Audible and visible alarms prioritized by severity
   
  Packing Units
  Package 1 Weight
  63.6 kg
   
  Package 1 Height
  33 cm
   
  Package 1 width
  61 cm
   
  Package 1 Length
  96 cm
   
  Number of Units in Package 3
  6
   
  Offer Sustainability
  Sustainable offer status
  Green Premium product
   
  REACh free of SVHC
  Yes
   
  EU RoHS Directive
  Compliant EU RoHS Declaration
   
  Mercury free
  Yes
   
  RoHS exemption information
  Yes
   
  WEEE
  The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins
   
  Optimized Energy Efficiency
  Energy efficient product

  Add to cart

  Quick View
• 

  APC 1500VA 230V 2U Rackmount Smart-UPS – Kenya

  KSh125,000.00

  1500VA APC 230V 2U Rackmount Smart-UPS 

  1500VA APC 230V 2U Smart-UPS Intelligent and efficient network power protection from entry level to scaleable runtime. Ideal UPS for servers, point-of-sale, routers, switches.

   

  APC 1500VA 230V 2U Rackmount Smart-UPS Includes: CD with software, Documentation CD, Installation guide, Rack Mounting support rails, Smart UPS signalling RS-232 cable, USB cable. 1500VA APC 230V 2U Smart-UPS Provides clear and accurate information in multiple languages with the ability to configure the UPS locally with easy to use navigation keys.

   

  1500VA APC 230V 2U Smart-UPS Single outlet group that may be controlled separately from the UPS for discrete reboot of hung devices, sequenced on/off and non-critical load shedding. APC 1500VA 230V 2U Rackmount Smart-UPS Most models provide remote power management options of the UPS over the network. Many do not have NMC embedded.

  1500VA APC 230V 2U Smart-UPS Specifications
  Max Configurable Power (Watts)

  1.0kWatts / 1.5kVA
  Output Voltage Note

  Configurable for 220 : 230 or 240 nominal output voltage
  Output Voltage Distortion

  Less than 5% at full load
  Output Frequency (sync to mains)

  47 – 53 Hz for 50 Hz nominal, 57 – 63 Hz for 60 Hz nominal
  Other Output Voltages

  220, 240
  Topology

  Line Interactive
  Waveform type

  Sine wave
  Transfer Time

  2ms typical
  Input
  Input frequency

  50/60 Hz +/- 3 Hz (auto sensing)
  Input voltage range for main operations

  160 – 286V
  Input voltage adjustable range for mains operation

  151 – 302V
  Other Input Voltages

  220, 240
  Batteries & Runtime
  Battery type

  Maintenance-free sealed Lead-Acid battery with suspended electrolyte : leakproof
  Typical recharge time

  3hour(s)
  Replacement Battery

  APCRBC133
  Expected Battery Life (years)

  4 – 6
  RBC Quantity

  1
  Battery Charge Power (Watts)

  144Watts
  Battery Volt-Amp-Hour Capacity

  432
  Runtime

  View Runtime Graph
  View Runtime Chart
  Efficiency

  View Efficiency Graph
  Communications & Management
  Interface Port(s)

  RJ-45 Serial, SmartSlot, USB
  Control panel

  Multi-function LCD status and control console
  Audible Alarm

  Alarm when on battery : distinctive low battery alarm : configurable delays
  Emergency Power Off (EPO)

  Optional
  Available SmartSlot™ Interface Quantity

  1
  Surge Protection and Filtering
  Surge energy rating

  459Joules
  Filtering

  Full time multi-pole noise filtering : 0.3% IEEE surge let-through : zero clamping response time : meets UL 1449
  Physical
  Maximum Height

  89MM, 8.9CM
  Maximum Width

  432MM, 43.2CM
  Maximum Depth

  457MM, 45.7CM
  Net Weight

  28.64KG
  Shipping weight

  31.91KG
  Shipping Height

  251MM, 25.1CM
  Shipping Width

  594MM, 59.4CM
  Shipping Depth

  603MM, 60.3CM
  Color

  Black
  Units per Pallet

  8.0
  Environmental
  Operating Temperature

  0 – 40 °C
  Operating Relative Humidity

  0 – 95 %
  Operating Elevation

  0-3000meters
  Storage Temperature

  -15 – 45 °C
  Storage Relative Humidity

  0 – 95 %
  Storage Elevation

  0-15000meters
  Audible noise at 1 meter from surface of unit

  46.0dBA
  Online thermal dissipation

  90.0BTU/hr
  Conformance
  Approvals

  C-tick, CE, EN 50091-1, EN 50091-2, TUV, VDE
  Standard warranty

  6 years (requires registration)
  Sustainable Offer Status
  RoHS

  Compliant
  REACH

  REACH: Contains SVHCs

   

  Add to cart

  Quick View
• 

  APC 1KVA Smart-UPS, 1000VA LCD 230V ,SMC1000I UPS – Kenya

  KSh96,000.00

  1KVA APC Smart-UPS C 1000VA LCD 230V SMC1000I UPS

  1KVA APC Smart-UPS C 1000VA LCD 230V SMC1000I UPS Provides key UPS status at a glance. Multiple status indicators with load and battery bar graphs. 1KVA APC Smart-UPS Patent-pending operating mode that bypasses unused electrical components in good power conditions to achieve very high operating efficiency without sacrificing any protection.

  1KVA APC Smart-UPS LCD display Provides key UPS status at a glance. Multiple status indicators with load and battery bar graphs. APC Smart-UPS C 1000VA LCD UPS Prolongs battery life by regulating the charge voltage according to battery temperature.

  SMC1000I UPS Maximizes useful battery life by widening the input voltage window or tightening the output voltage regulation. APC SMC1000I UPS Increases availability by allowing a trained user to perform upgrades and replacements of the batteries reducing Mean Time to Repair (MTTR)

  APC SMC1000I UPS SPECIFICATIONS
  Main
  acoustic level
  41 dBA

  battery curve
  C

  battery type
  Lead-acid battery

  product certifications
  CE CSA GOST VDE EAC

  curve equation
  Efficiency

  curve fixed loss
  0.016

  curve load maximum
  100 %

  curve load minimum
  2 %

  curve proportional loss
  0

  curve square loss
  0.001

  curve test cond ID
  Curve fit of data measured in accordance with the ENERGY STAR Test Method for Uninterruptible Power Supplies. All measurements taken in normal mode(s), at typical environmental conditions, with 230V/50Hz electrical input and balanced resistive load (PF = 1.0) output.

  curve X-axis maximum
  100 %

  curve X-axis minimum
  0 %

  curve X-axis title
  Load

  curve X-axis units
  Percentage

  curve Y-axis maximum
  100 %

  curve Y-axis minimum
  50 %

  curve Y-axis title
  Efficiency

  curve Y-axis units
  Percentage

  extended runtime
  0

  Maximum configurable power in VA
  1000 VA

  Maximum configurable power in W
  600 W

  liquid value
  0

  mounting location
  Front

  mounting mode
  Not rack-mountable

  mounting preference
  No preference

  number of battery filled slots
  0

  number of battery free slots
  0

  Battery recharge time
  3 h

  number of battery replacement quantity
  1

  depth
  43.9 cm

  free slots
  0

  height
  21.9 cm

  performance multiplier
  1

  Number of power module filled slots
  0

  Number of power module free slots
  0

  net weight
  17.27 kg

  rated power in VA
  1000 VA

  rated power in W
  600 W

  Surge energy rate
  455 J

  Number of tare power
  45 W

  width
  17.1 cm

  noise suppression
  Full time multi-pole noise filtering : 0.3% IEEE surge let-through : zero clamping response time : meets UL 1449

  operating altitude
  0…10000 ft

  ambient air temperature for operation
  0…40 °C

  battery life
  3…5 year(s)

  ambient air temperature for storage
  -15…45 °C

  storage altitude
  0.00…15240.00 m

  size UPS version
  Internetworking Server Telecom

  standards
  UL 1778

  UPS size
  S

  UPS type
  Line interactive

  Wave type
  Sine wave

  graph display
  1

  redundant
  No

  show note OP temperature
  No

  two post mountable
  0

  Yes

  colour
  Black

  input voltage limits
  170…300 V adjustable 180…287 V

  input voltage
  230 V

  battery charger power
  56 W rated

  nb of power socket outlets
  8 IEC 320 C13 2 IEC Jumpers

  network frequency
  50/60 Hz +/- 3 Hz auto-sensing

  output voltage
  230 V

  plug standard
  IEC 320 C14

  provided equipment
  CD with software Documentation CD USB cable

  relative humidity
  0…95 %

  Battery power in VAH
  170 VAh runtime

  inputvolt_other
  220 V 240 V

  product web sub-family
  Entry level

  value multiplier
  1

  harmonic distortion
  Less than 5 % at full load

  Environment
  heat dissipation
  100 Btu/h

  Output
  output frequency
  50/60 Hz +/- 3 Hz sync to mains

  Communications & Management
  control panel
  Multifunction LCD status and control console

  alarm
  Alarm when on battery : distinctive low battery alarm : configurable delays

  Packing Units
  Package 1 Weight
  19.55 kg

  Package 1 Height
  37.6 cm

  Package 1 width
  32.8 cm

  Package 1 Length
  59.5 cm

  Number of Units in Package 2
  1

  Number of Units in Package 3
  18

  Offer Sustainability
  Sustainable offer status
  Green Premium product

  REACh free of SVHC
  Yes

  EU RoHS Directive
  Compliant EU RoHS Declaration

  Mercury free
  Yes

  RoHS exemption information
  Yes

  WEEE
  The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins

  Optimized Energy Efficiency
  Energy efficient product

  Contractual warranty
  Warranty
  2 years repair or replace

  Add to cart

  Quick View