Fibre 96 Core Termination Box 395*195*110mm U/G IP67 – 3 IN 3 Out Closure – Kenya
KSh7,000.00
Fibre 96 Core Termination Box 395*195*110mm U/G IP67 – 3 IN 3 Out Closure
Fibre 96 Core Termination Box 395*195*110mm U/G IP67 – 3 IN 3 Out Closure from the leading fibre dealer in Nairobi Kenya, buy online Fibre 96 Core Termination Box 395*195*110mm U/G IP67 – 3 IN 3 Out Closure and have it delivered.Fibre 96 Core Termination Box 395*195*110mm U/G IP67 – 3 IN 3 Out Closure enclosure casing is made of quality engineering plastics, and of good performance of anti-erosion against acid and alkali salt, anti-aging, as well as smooth appearance and reliable mechanical structure.Fibre 96 Core Termination Box 395*195*110mm U/G IP67 – 3 IN 3 Out Closure mechanical structure is reliable and has the performance of resisting wild environment and intensive climate changes and serious working environment.
Tests Requirements Results
Tightness testing Follow the standards:
IEC 61300-2-38 Method A
IEC 60068-2-17 Test Qc No leakage under testing condition:
Pressures: (40 ± 2) kPa
Temperature: (23 ± 3)**
Testing duration: 15 minutes
Testing deepness: place the whole closure into water.
Qualification
Hoarfrost testing Follow the standards:
IEC 61300-2-26 Method A
IEC 60068-2-11 Test Ka Ensuring no leakage and the cover of closure is not broken, color is not changed, eroded under testing condition:
Pressures: 0 kPa
Temperature: (35 ± 2)**
Testing duration: 5 days
Place closure in the water environment with NaCl’s concentration of 5%.
Qualification
Drop testing Follow the standards:
IEC 61300-2-10 Method A Ensuring no leakage under testing condition:
Drop length: 75cm
Temperature: (45 ± 2)**
Drop count: 1 time
Qualification
Vibration testing Follow the standards:
IEC 61300-2-1
IEC 60068-2-6 Test Fc Ensuring no leakage under testing condition:
Vibration frequency: 10 Hz.
Amplitude: ** 6 mm (peak to peak)
Testing duration: 28 hours
Qualification
Other requirement
Can install splitters to the closure (if there is special requirement).
For some small capacity closure (under 48 cores) used for Branching to subscribers can require for ODF mini and integrate splitters inside.
The closure cover can sustain affect of ultraviolet ray without broken or changing color.
Working temperature: (0 – 60)**
Humidity: 100%
Qualification
Fibre 96 Core Termination Box 395*195*110mm U/G IP67 – 3 IN 3 Out Closure
Fibre 96 Core Termination Box 395*195*110mm U/G IP67 – 3 IN 3 Out Closure from the leading fibre dealer in Nairobi Kenya, buy online Fibre 96 Core Termination Box 395*195*110mm U/G IP67 – 3 IN 3 Out Closure and have it delivered.Fibre 96 Core Termination Box 395*195*110mm U/G IP67 – 3 IN 3 Out Closure enclosure casing is made of quality engineering plastics, and of good performance of anti-erosion against acid and alkali salt, anti-aging, as well as smooth appearance and reliable mechanical structure.Fibre 96 Core Termination Box 395*195*110mm U/G IP67 – 3 IN 3 Out Closure mechanical structure is reliable and has the performance of resisting wild environment and intensive climate changes and serious working environment.
Tests Requirements Results
Tightness testing Follow the standards:
IEC 61300-2-38 Method A
IEC 60068-2-17 Test Qc No leakage under testing condition:
Pressures: (40 ± 2) kPa
Temperature: (23 ± 3)?
Testing duration: 15 minutes
Testing deepness: place the whole closure into water.
Qualification
Hoarfrost testing Follow the standards:
IEC 61300-2-26 Method A
IEC 60068-2-11 Test Ka Ensuring no leakage and the cover of closure is not broken, color is not changed, eroded under testing condition:
Pressures: 0 kPa
Temperature: (35 ± 2)?
Testing duration: 5 days
Place closure in the water environment with NaCl’s concentration of 5%.
Qualification
Drop testing Follow the standards:
IEC 61300-2-10 Method A Ensuring no leakage under testing condition:
Drop length: 75cm
Temperature: (45 ± 2)?
Drop count: 1 time
Qualification
Vibration testing Follow the standards:
IEC 61300-2-1
IEC 60068-2-6 Test Fc Ensuring no leakage under testing condition:
Vibration frequency: 10 Hz.
Amplitude: ? 6 mm (peak to peak)
Testing duration: 28 hours
Qualification
Other requirement
Can install splitters to the closure (if there is special requirement).
For some small capacity closure (under 48 cores) used for Branching to subscribers can require for ODF mini and integrate splitters inside.
The closure cover can sustain affect of ultraviolet ray without broken or changing color.
Working temperature: (0 – 60)?
Humidity: 100%
Qualification
Related products
-
Add to cart1X16 Bare PLC Steel Tube 250µm Single Mode Fiber Splitter
1X16 Bare PLC Steel Tube 250µm Single Mode Fiber Splitter from the leading fiber dealer in Nairobi Kenya, buy 1X16 Bare PLC Steel Tube 250µm Single Mode Fiber Splitter and have it delivered.
PLC splitter is a type of optical power management device that is fabricated using silica optical waveguide technology to distribute optical signals from Central Office (CO) to multiple premise locations. 1X16 Bare PLC Steel Tube 250µm Single Mode Fiber is a kind of ODN product suitable for PON networks that can be installed in the pigtail cassette, test instrument and WDM system, which minimizes the space occupation.
1X16 Bare PLC Steel Tube 250µm Single Mode Fiber is relatively fragile on fiber protection and need a complete protection design on carrying box body and device.
Name of the test
Condition
Duration
Temperature- Humidity aging
85°C and 85% RH
7 days
Vibration
10 – 55Hz, 1.52mm double amplitude, in three axes
1 hour
Component Impact
Test Impact of 500g (mass ** 0.125kg), 1ms , half sine pulse
2 impacts
Temperature Cycling Test
-40 – 70°C, Ramp rate: 1°C /min, Dwell time > 15min
10 cycles
Temperature- Humidity cycling
-40 – 85°C , between 10°C and 23°C – 85% RH, at 85°C – 20%RH, between °C and 85°C – maintain a linear change in RH, below 10°C – uncontrolled RH
14 days
Water Immersion
43 ± 2°C , PH 5.5 ± 0.5
7 days
Fiber Side Pull test
0.23 kg load, 90° angle , 2 directions
5 seconds
Fiber Side Pull test
0.45 Kg load for Single Input Fiber, 1.5 Kg load for 8 Fiber Ribbon Outputs
-
Add to cart1 X 32 PVC 0.9mm fiber jacket SC/PC Rack Splitter connectors**
1 X 32 PVC 0.9mm fiber jacket SC/PC Rack Splitter connectors from the leading dealer in Nairobi Kenya, buy online 1 X 32 PVC 0.9mm fiber jacket SC/PC Rack Splitter connectors and have it delivered at your doorstep.
**
Geehes PLC splitters feature low insertion loss, good channel-to-channel uniformity and low PDL over the 1260 to 1650 nm wavelength range. For maximum network robustness and minimum maintenance requirements, these splitters are designed to operate over a wide temperature range suitable for outside plant installation.
Service operators can extend service to customers taking advantage of passive optical networks requiring anywhere from 1 x 2 to 1 x 64 splits. Features:
**Single fiber, SC/LC/ST/FC-based connector
**In-line connection available
**Operating temperature: -40** to 85**C
**Cable Diameter Range: 1.5mm, 2.0mm, 3.0mm,2.0*3.0mmApplication:
**FTTx systems
**PON networks
**CATV links
**Optical signal distribution
**Broadband, CATV, telecom, data centers, LAN, WAN, medical, military and wireless
**Compliance** Specification: **
FIber Optical**PLC Splitter**
Parameter 1**4 1**8 1**16 1**32 1**64 2**4 2**8 2**16 2**32
Operating Wavelength(nm) 1260~1650
Port Wavelength Range (nm) 1310 **20,1490 **10 and 1550 **20
Insertion Loss @1310nm/1550nm 7.1 10.5 13.6 16.8 20.5 7.4 10.8 14.5 17.5
Uniformity (dB) 0.5 0.8 1 1.2 1.8 1.2 1.5 1.8 2
PDL @ 1310/1550 nm (dB) **0.3
Return Loss@ 1310/1551 nm (dB) **-55
Input Power (mW) 250max
Operating Temperature (**) -40~+85**
Storage Temperature (**) -40~+85**
Fiber Type Corning G657A1 -
Add to cart12 Core Single-mode Air Blown Duct Micro Fiber Optic Cable, G652D Mtech
The 12 Core Single Mode Air Blown Duct Micro Fiber Optic Cable is a cutting-edge solution designed for high-speed telecommunications and data transmission. With its compact and lightweight design, this cable is ideal for applications requiring minimal space and maximum efficiency, such as Fiber to the Home (FTTH), data centers, and high-density network environments. The cable comprises 12 single-mode fibers, allowing for efficient data transmission over long distances while maintaining signal integrity and quality. Engineered for air-blown installation systems, it enables quick and easy deployment through existing duct networks without the need for extensive construction or disruption.
This fiber optic cable offers excellent performance with low attenuation rates, typically ** 0.35 dB/km at 1310 nm and ** 0.20 dB/km at 1550 nm, ensuring high-quality signal transmission over extended distances. It is constructed with low smoke zero halogen (LSZH) material, making it resistant to fire and emitting minimal smoke and toxic fumes, which enhances safety in emergencies. Designed to operate effectively in a wide temperature range, from -20**C to +70**C, and with storage conditions ranging from -40**C to +70**C, the cable is suitable for diverse environments. Additionally, it features an integrated moisture barrier that protects against water ingress, ensuring reliability and durability even in humid or wet conditions.
In summary, the 12 Core Single Mode Air Blown Duct Micro Fiber Optic Cable is a versatile and reliable solution for modern networking needs. It provides high-speed data transmission and easy installation for various applications, making it an essential choice for telecommunication professionals seeking efficiency and performance.
**
** -
Add to cart1X64 blockless 900µm fiber LC/PC PLC Fiber splitter connectors
The 1×64 Blockless 900µm Fiber LC/PC PLC Fiber Splitter is a high-performance optical splitter designed for distributing a single input signal to 64 output fibers. Featuring a compact, blockless design, this splitter is ideal for space-constrained installations and provides efficient signal distribution in fiber optic networks.
It uses LC/PC connectors with a physical contact polish to ensure minimal insertion loss and back reflection. The splitter supports a wide wavelength range of 1260 nm to 1650 nm and offers a typical insertion loss of **20.5 dB, with high return loss of **50 dB and uniformity of **2.0 dB.
The device is equipped with 900µm tight-buffered fibers, providing enhanced flexibility and durability. Designed to meet industry standards such as Telcordia GR-1209, GR-1221, and RoHS, it ensures reliable and consistent performance across various network applications including FTTH, PON, and CATV. The splitter is easy to install and maintain, making it a practical solution for high-density fiber optic deployments.
Product Name: Fiber Optic PLC Splitter 1×16 Blockless With LC APC 9 / 125**m Connector Configuration Type: 1×16
Package Style: Mini Module Connector Type: LC/APC
Fiber Type: Singlemode Return Loss: **60dB
Operating/Storage Temperature: -40~85°C Directivity: **55dB
High Light:
rack mount plc splitter,
plc splitter module
-
Add to cart12 Core Singlemode Un-Armoured Fibre Optic Cable**
The 12 Core Singlemode Un-Armoured Fibre Optic Cable is engineered for high-performance data transmission across long distances, making it an ideal choice for telecommunications, data centers, and backbone networks. This cable features 12 singlemode fibers with a core diameter of 9 **m and a cladding diameter of 125 **m, ensuring optimal light transmission for both 1310 nm and 1550 nm wavelengths.
The un-armoured design allows for greater flexibility and lighter weight, making installation easier in various environments. The outer diameter typically measures around 3.0 mm and is available with either a PVC or LSZH (Low Smoke Zero Halogen) sheath, offering a balance between durability and fire safety.
With a maximum attenuation of ** 0.35 dB/km at 1310 nm and ** 0.20 dB/km at 1550 nm, this cable maintains high signal integrity even over extensive distances. Its minimum bend radius of 10 x the outer diameter during installation and 20 x the outer diameter in use ensures that the cable can withstand tight bends without compromising performance.
Operating efficiently in temperatures ranging from -20**C to +70**C, this cable is designed for resilience and reliability in various conditions. The fibers are color-coded in accordance with industry standards, with yellow indicating singlemode fibers, facilitating easy identification during installation.
Overall, the 12 Core Singlemode Un-Armoured Fibre Optic Cable combines advanced technology and practical design, making it an excellent choice for organizations looking to enhance their network infrastructure with reliable, high-speed connectivity.
**