HAMMER 640 5 Joule Energizer – Kenya

Related products

• 

  Hammer 680 8 Joule Energizer with Battery – Kenya

  KSh40,000.00

  Hammer 680 8 Joule Energizer with Battery 

  Hammer 680 8 Joule Energizer with Battery electric fence energizer is the heart of the system & should be purchased according to the length of the fence you require. All energizers are governed to a maximum of 10kv  Hammer Energizer have specifically been designed for the ever demanding security industry.

  Hammer 680  electric fencing solutions for home, commercial, and infrastructure security. Our monitoring technology allows for advanced warning of any fence breach or tampering, and has the capability to identify the specific area should an intrusion occur, meaning that security resources can quickly be directed to where they are required. HAMMER 680 4 Joule Energizer is the best choice energizer with its main focus on urban electrical fence requirements and industrial installation.

  HAMMER 680 4 Joule Energizer range of energizers is very well established all over Africa and have been tested in the field for many years. It is easy t install and even easier to operate. Energiser EZ680 ELECTRIC FENCE The electric fence energizer is the heart of the system & should be purchased according to the length of fence you require. need installer manual for a hammer ez 630 hammer ez 680 fence energizer MERLIN 4 is a battery (12V 7AH nominal) operated energizer suitable for hammer.

  NB: Always insert the plastic sleeve from the inside of the box. STEP 5: Hammer EZ 680 Electric Fence Energizer. 3.5. 1 votes. Are you But, we took the house as is and with it came this electric fence energizer.

  This is a fence . should I trust** Here’s a link that includes instructions on how to make connections: To determine if the fault is with the fence or the energizer, Test the energizer first, Turn off energizer, Disconnect ground wire and the fence wire. 25 Apr 2011 i have the above energizer hammer ez680 not working. the bar led indicators are not working except I found a manual for the EZ630 online: EZ630. EZ640. EZ680. ACE 100. ACE 200. The HAMMER range of

  Hammer electric fence energizer specifications
  Stored energy: 15J,
  Output energy 500ohm: 8J,
  Output Voltage max: 10KV,
  Output voltage min: 5kv,
  Backup time max: 14hrs,
  Backup time min: 7 hrs,
  Battery Volts: 12V,
  Battery Capacity: 2Ah,
  Mains power: 220vac,
  Pulse period: 1-1.5s,
  Pulse Width: 0.3ms,
  Alarm delay: 4s,
  Siren time out: 4min,
  Fence wire 1mm Steel: 4km,
  Fence wire 1mm galv: 8km,
  Fence wire 2.2mm galv: 40km,
  Energiser width:21.5cm,
  Energiser length: 33.5cm,
  Energiser height: 9.5cm,
  Energiser weight: 8kg app

  Add to cart

  Quick View
• 

  Wizord 4i Electric Fence Energizer 4 Joules

  KSh53,000.00

  Description
  Wizord 4i Electric Fence Energizer Energizer 4 Joules 

  Wizord 4i Electric Fence Energizer Energizer 4 Joules is the logical choice for domestic and light industrial installations where a medium powered energizer is required. This generation of energizers has been field tested for many years and boasts unsurpassed reliability. Simple to install and easy to maintain.

  Wizord 4i Electric Fence Energizer Energizer 4 Joules specifications

  Enclosure size: L285 x W212 x D120 Weight excluding battery (7AH): 3.1kg Weight including battery (7AH): 5.3kg IP rating: IPx4 Operating temperatures: -10°C to 50°C Operating humidity: < 80% non-condensing Electrical supply voltage: 240V Typical power consumption (normal operating conditions): 18VA Standby time (fully charged battery): 24hrs Energy output 500 Ohms load: 3.7 Joule Open circuit voltage: 8 000V Stock Code Name Description E-WIZ4I Wizord 4i Wizord 4i – 4J Energizer E-WIZ4I/EU Wizord 4i Wizord 4i – 4J Energizer – EU Plug E-WIZ4I/UK Wizord 4i Wizord 4i – 4J Energizer – UK Plug   Wizord 4i Electric Fence Energizer 4 Joules futures Energizer Output: Offers an output of 4 Joules, which determines the strength of the electric pulse delivered to the fence wires. Zone Coverage: Can secure multiple zones or perimeter areas depending on the model’s output capacity and fence layout. Fence Length: Suitable for fencing of different lengths, depending on the model and installation requirements. LED Indicators: Equipped with LED lights to indicate the status of the energizer, including power on, fence fault, and low battery. Weatherproof Housing: Designed to withstand outdoor conditions with a weatherproof and durable housing. Smart Technology: Some models may feature advanced smart technology that adjusts the output based on the fence’s condition, conserving energy and maximizing efficiency. Low Maintenance: Requires minimal maintenance and calibration, providing reliable operation over time. Power Source: Typically operates on mains (AC) power supply. Some models may offer battery backup or solar options for use during power outages. Remote Control: Some models may include remote control features for arming and disarming the energizer, providing added convenience. Monitoring: Some models may offer monitoring capabilities to alert users to fence faults or breaches. Safety: Designed to provide a safe yet effective deterrent. The electric shock is intended to discourage intruders without causing harm. Compatibility: Compatible with various types of fence wires, including high-tensile wire, polywire, and more. Installation: Designed for straightforward installation and mounting near the fence wires.

  Add to cart

  Quick View
• 

  Druid 28 LCD security energizer electric fence – Kenya

  KSh60,000.00

  Druid 28 LCD security energizer electric fence

  Druid 28 LCD security energizer electric fence LCD display in the Druid range makes information on the status and performance of the energizer quick and easy to read. Druid 28 LCD security energizer  Using the Adaptive Power Technology (APT) pioneered by Nemtek, these energizers offer a unique technology to detect how much power a fence can accept and handle before it starts to arc and waste energy.

  Druid 28 LCD security energizer maximizes the power on the fence and minimizes false alarms. Synchronisation between energizers can be achieved by using traditional network cabling or by the Druid synchronization modules which use orbiting satellites and eliminate the need for cabling between the energizers.

  Druid 28 LCD The LCD display in the Druid range makes information on the status and performance of the energizer quick and easy to read. Using the Adaptive Power Technology (APT) pioneered by Nemtek,

  Druid 28 LCD  energizer offers a unique technology to detect how much power a fence can accept and handle before it starts to arc and waste energy. This maximises the power on the fence and minimizes false alarms. Druid 28LCD energizer offers the following:

  7.6J output deal choice for long-distance series electric fencing systems that require monitoringBuilt-in alarm monitors tampering or faults on the high voltage and earth fence wire connectable to armed response radio.

  Druid 28 LCD  energizer GSM module lighting and power surge protectionIntelligent power saving to extend battery life easy-to-use tag included for controlling the energized walk test mode for easy fence testing LCD background colour changes to easily identify the fence condition.

  Druid 28 LCD security energizer powered by 230V mains and includes a built-in battery for back up powerBuilt-in gate alarm inputs to monitor if the gate is open or closed Optional keypad for controlling and programming the energizer. This allows the user to control the energizer remotely, with up to two keypads .

  Druid 28 LCD security energizer electric fence specifications

  • Two 3.7 Joule independently monitored and controlled zones
  • The robust and flexible design is ideal for commercial, industrial and high-security sites
  • Each zone can be set independently to be on/off or in high/low voltage modes
  • Can be programmed into alarm sensor mode allowing it to be integrated into a separate burglar alarm system
  • Four zones can easily be created by linking two Druid 25LCD energizers together using the Druid four-zone keypad
  • Built-in alarm monitors tampering or faults on the high voltage and earth fence wires
  • Connectable to armed response radio or GSM module
  • Lightning and power surge protection
  • Intelligent power saving to extend battery life
  • Built-in gate alarm input to monitor if the gate is open or closed
  • Optional keypad for controlling and programming the energizer. This allows the user to control the energizer remotely, with up to two keypads
  • The relay expansion card can be used to increase the number of information outputs from the energizer
  • Walk test mode for easy fence testing
  • The LCD background colour changes to easily identify the fence condition

  Details
  Devices :
  FG7 (Module with touchscreen)
  Energizer
  IO Card

  Video /Data Association : Yes
  Event Control : Yes
  Database Search : Yes
  Interactive and Map Control : Yes
  CathexisVision Version : CathexisVision 2016.3, Cathexis 2017.2 and later
  License :
  CNEF-1001 (Nemtek electric fence object)
  CNEF-2000 (Nemtek electric fence device)
  CNEF–3000 (Nemtek electric fence bundle)

  Firmware Version : Rev FG7 D2X1.6

  Features 
  Connection Type : Ethernet Port
  Display type : Data is displayed in CathexisVision via an overlay, which is placed over a CathexisVision video feed.
  Operating system : Windows/Linux
  Objects :
  Energizer
  Zones
  Inputs
  IOCard
  Inputs
  Outputs

  Overlays :
  The overlays are configurable (position/colour).
  The Zones and Inputs/Outputs states are displayed on the overlay.

  Integration Database :
  All device events are entered in the database.
  Multiple cameras can be assigned to a single sensor, and viewed in the database.
  Events can be filtered in the integration database.

  Multiple Devices : When more then one Energizer/IO card is connected together the Zones and inputs/outputs are automatically populated in the integration.
  Enclosure size: L400mm x W270mm x D125mm
  Weight excluding battery: (7AH) 5.7kg
  Weight including battery: (7AH) 8.0kg
  IP rating: IPx4
  Operating temperatures: -10°C to 50°C
  Operating humidity: < 80% non-condensing Electrical supply voltage: 240V Typical power consumption (normal operating conditions): 18VA Internal battery 7AH Standby time (fully charged battery): 24hrs High-voltage output Energy (500 Ohms load): 3.7 Joule per zone Open circuit voltage: 9 000V

  Add to cart

  Quick View
• 

  JVA Z14 One Zone Security Energiser

  KSh40,000.00

  Fiber

  Add to cart

  Quick View
• 

  Stafix X3 Energizer

  KSh47,000.00

  Description
  Stafix X3 Energizer 

  Stafix X3 Energizer Can be used in mains, battery or solar power applications, providing convenient, versatile livestock control. Stafix X3 Energizer  Powers up to 45 acres / 18 ha (30 km) of fence 3 J maximum output energy (4.5 J stored energy). Stafix X3 Energizer maximum output energy (4.5 J stored energy) Stafix X3 Energizer system can efficiently energize(6-10kv) up to 3 miles of 9-strand mixed-metals Polybraid, single-strand and ~ 6 miles of 12.5 ga hi-tensile.

  Results do vary depending on the quality of grounding system, soil conductivity, soil type, moisture content, X3 Energizer is Solar compatible, X3 energizer electrify your fence with solar power by connecting solar panels to any Stafix Unigizer. The solar panels charge the battery connected to the Unigizer, for reliable livestock control.  Recommended solar panel – 30 watt panel. Stafix X3 Energizer has Indicator lights that are easy to read light bar display provides an instant measure of the Unigizer output voltage and battery condition for quick fence diagnostics.

  The LED display shows red when heavily loaded Stafix X3 energizers has Day/Night sensor that automatically adjusts pulse speed to contain or exclude animals based on day or night conditions  X3 energizers has Large terminals Mounted on the front of the energizer casing for convenience, these large terminals are easily adjusted and accept up to two fence wires.

  The slotted terminals make inserting wires and getting a good connection easy. Stafix X3 energizers have Low impedance, X3 is designed to deliver power to the end of the fence even under heavy load e.g. foliage, undergrowth. Stafix X3 energizers Can be mounted on a wall, post or fence wire. Choose indoor or outdoor installation, depending on your fence location and power supply

  Stafix X3 energizers specifications
  Distance powers: km 30 km
  Distance powers: Acres 45 acres
  Distance powers: Hectares 18 ha
  Input Voltage 12 V / 100 – 240 V
  Maximum stored energy 4.5 J
  Maximum output energy 3.0 J
  Output Voltage @ 500 ** 6,200 V
  Minimum number of earth rods required We recommend you confirm requirements with your local reseller 3
  Physical Details
  Weight: kilograms 2.2 kg
  Volume: Metric 170 x 240 x 78 mm
  Stafix X3 Energizer futures
  Solar compatible. Electrify your fence with solar power by connecting solar panels to any Stafix Unigizer. The solar panels charge the battery connected to the Unigizer, for reliable livestock control
  Indicator lights (voltage and battery). Easy to read light bar display provides an instant measure of the Unigizer output voltage and battery condition for quick fence diagnostics. The LED display shows red when heavily loaded
  Day/Night sensor. Automatically adjusts pulse speed to contain or exclude animals based on day or night conditions
  Large terminals. Mounted on the front of the energizer casing for convenience, these large terminals are easily adjusted and accept up to two fence wires. The slotted terminals make inserting wires and getting a good connection easy
  Versatile mounting options. Can be mounted on a wall, post or fence wire. Choose indoor or outdoor installation, depending on your fence location and power supply
  Versatile power options. Can be used in mains, battery or solar power applications, providing convenient, versatile livestock control
  Adjustable output power and pulse speeds.

  Add to cart

  Quick View