Ikusi SBA-102-C48 Amplifier 2VHF/UHF inputs (channels 21-48)
KSh4,650.00
IKUSI SBA-102-C48. Multiband mast amplifiers Adapted to the first and second digital dividend.
Features?
Adapted to the first and second digital dividend
Very high UHF gain.
Interstage variable attenuators.
Optimum design for very low operative noise figure.
Internal injection-moulded zinc alloy housing with F type ports.
Technical specifications
MODEL
SBA102-C60 SBA102-C48 REF. SBA102 Series
1301 Frequency range MHz 470 – 790 (1st dividend) 47 – 240
1302 470 – 694 (2nd dividend)
RF inputs 2
UHF BI/FM/DAB/BIII
Nominal gain dB 25 -1
Gain adjustment dB 0 – 15 –
Noise figure dB ? 2 1
Output level (DIN-B, -60dB) dB?V 106
Input isolation dB ?26
Operation voltage VDC +24
Consumption mA 45
Dimensions mm 96 x 125 x 46
?
MANUAL/DATASHEET
Related products
-
Mast G.C 3m ? 45mm thickness 2mm Televes
KSh15,982.00Add to cartHot galvanized steel mast, with excellent resistance to corrosion that guarantees the longest weathering. Televes 301002
-
Add to cartTOS 08F, 8-way PLC Splitter FC/PC?
The balanced coupler is implemented in a valid metal housing
pre-assembled with FC/PC connectors
PLC (Planar Lightwave Circuit) couplers with a wide window of wave lengths
Low and flat insertion loss
Specifications
CHARACTERISTICS
Type OPTO Coupler balanced
Coupling Ratio (OPTO) 8x 12.5 %
Wavelength 1260…1650 nm
LOSS
Insertion loss (typ.) 10.2 dB
CONNECTORS
Connector Type Optical – FC/PC
Number of inputs 1
Number of outputs 8
MECHANICAL
Dimensions product (H x D x W) 150x20x114 mm
Packing QTY 1
Packaging Height 0,045 m
Packaging Width 0,153 m
Packaging Depth 0,213 m
Packaging Volume 0,001 m3
Net Weight 0,286 kg
Tara Weight 0,064 kg
Total Weight 0,350 kg -
Add to cartThe Televes 5354 mast amplifier has 2 inputs and 4 outputs that also allow the passage of the signal of a parabolic antenna, with an amplification power of 21db.
-
Add to cartMasthead amplifier for the amplification and combination of terrestrial and satellite television signals coming from several antennas. LTE700. Equipped with 3 inputs: the signals on both UHF inputs are amplified, whereas the SAT signal is only combined.
Allows DC pass towards the satellite input to power the LNB.?Televes 561421 -
Add to cartKit consisting of:
Ref. 561621: NanoKom mast amplifier, 3 inputs: UHF-VHFmix-FImix
Mast-mounted amplifier to amplify and mix terrestrial and satellite television signals from various antennas.
It consists of 3 inputs: the signal is amplified at the UHF input, while the VHF and IF (SAT) input are only mixed.
Allows DC pass to the satellite input to power the LNB.
Ref. 5796: PicoKom power supply (for FImix) 12V – 220mA, 1 output
12V (220mA) source, which sends power through the input coaxial cable, allowing the TV signal to pass through. It is sandwiched in the installation to power mast amplifiers or a BOSS system. It is compatible with amplifiers with satellite mixing (FImix), as it automatically detects the existence of an LNB management signal (voltage and tone) generated by a receiver at its output, and lets it pass to its input.
Stands out for
They incorporate “USOS” (User Selectable Output Signal) technology: the installer selects the desired output level, which remains stable. The device adjusts automatically to adapt its gain to variations in the input signal.
Separate amplification and very low noise figure, thus respecting the signal quality
Ultra-slim ergonomic design
EasyF connection system
They can be powered from 12 to 24V
Fully automated manufacturing subjected to rigorous quality controls
High armor chassis, made of Zamak
Main Features
LTE700 / 5G filter to eliminate telephony interference
ON / OFF switch to allow DC through to UHF input, to power a BOSS system
Simple assembly. Flange for fixing to the mast included
Durable orange ABS plastic housing for outdoor installation
EasyF connection system: simplicity and savingsThe EasyF is an innovative concept of connection of the internal conductor of the coaxial (live) cable, which is inserted directly into the device increasing the reliability of the connection. Furthermore, thanks to the absence of “F” connectors, it is possible to reduce the chassis and secure the connection of two cables with a single screw.
Real time savings: speeding up the installation is possible, as it is not necessary to make the connectorization of the coaxial cables. In addition, the process of threading the connectors on the device is avoided, which is sometimes complicated when space is not enough.
Connection reliability: the cable tie that holds the cables prevents the coaxial from loosening
Cost savings: no additional connector (neither “F” nor “CEI”) is required
Space optimization: inputs and outputs are always located on the same side of the device, avoiding bending the coaxial cables and facilitating work inside cabinets and registers
Very simple assembly in three steps: you only need to screw and unscrew the covers to connect two cables:
1. Unscrew the cover of the device to access the connection
2. Insert the previously stripped coaxial cables
3. Close the cover and screw to secure the connection
Find out more about the reliability of the EasyF system
With EasyF, the connection of the coaxial cable in the device is made by means of an automated system of insertion of the live (internal conductor) by contact, without requiring soldering.
Like the first day: the life of the device increases by eliminating the possible deterioration of the welds with the passage of time
Reduced failure rate: generally caused by cold welding
Optimization of electromagnetic behavior: at high frequencies
Reinforcement of our commitment to the environment: pollution caused by the welding process is eliminated and electricity consumption in production is reduced
Reviews
There are no reviews yet.