Name: LTE filter High Rejection (HR) "EasyF" 47...694MHz VHF/UHF...
SKU: TELEVES-405202
Availability: InStock

HR (High Rejection) LTE700/5G filter
47…694 MHz (Ch.48), “EasyF” connection
LTE700/5G filter with high rejection against interference from channel 48 up. Suitable for outdoor use.
Highlights
Low insertion losses to avoid any impacts on the distributed signals
EasyF system: easy, quick and safe connectorization
Ultra-small ergonomic design
Fully automated manufacturing, subject to the most stringent quality controls
High-screening Zamak chassis
Features
Resistant ABS-plastic case for outdoor installation
Orange colour
?
EasyF connection system: simplicity and savings

EasyF is an innovative connection concept where the inner conductor of the coaxial cable is directly inserted in the device, thus improving connection reliability. Thanks to the absence of F connectors, the chassis can be reduced and the connection of two cables secured with a a single screw.

Real time savings: speeding the installation is possible without the need for coaxial cable termination. Furthermore, there is no need for screwing the connectors on the device, which is sometimes difficult when there is little room
Connection reliability: the clamp holding the cables prevents the coaxial cable to come off
Cost savings: no additional connectors are required (neither F nor IEC)
Space optimization: inputs and outputs are always on the same side of the device to prevent coaxial cables from bending, and to make working inside cabinets and register boxes easier
Very easy three-step mounting: only screwing and unscrewing the covers is required to connect both cables:

1. Unscrew the device’s cover to access the connection

2. Insert the previously stripped coaxial cables

3. Close the cover and screw to ensure connection

Learn more about EasyF system reliability

With EasyF, the connection between the coaxial cable and the device is carried out using an automated system for contact insertion of the inner conductor, without any soldering.?

Always as new: the device’s operating life increases when the factor of solder wearing out with time is removed
Failure rate reduction: usually produced as a result of cold soldering joints
Electromagnetic behaviour optimization: for high frequencies
Our commitment with environment is reinforced: pollution caused by the welding process is eliminated and production power consumption is reduced
Specifications
Frequency margin MHz 47 – 694 733 – 862
Attenuation dB 1 > 25
Inputs/Outputs n? 1 / 1
Max current through inputs mA —
Temperature operat. limits ?C -5 … +45
Protection Level IP 23